Dr 3000

Transcript

MOTOTRBO™ System Components and Benefits DR 3000 Repeater 3 2 1 4 5 6 1  100% continuous full duty cycle Repeater Standard Package 2 Supports two simultaneous voice or data paths in digital TDMA mode. • Repeater 3 Integrated power supply. 4 Operates in analogue or digital mode, bright, clear, colored LEDs indicate mode. Additional Features 5 LEDs clearly indicate transmit and receive modes in both channel slots. • Repeater Diagnostics and Control 6 Sturdy handles make installation and handling easier. • 16 channels • Power Cord • Multiple Site Support (IP Site Connect) MOTOTRBO™ System Components and Benefits DR 3000 - Repeater Specifications GENERAL SPECIFICATIONS Transmitter Channel Capacity 16 Typical RF Output Low Power UHF1 and VHF 1-25 W High Power UHF2 (450-512 MHz) 1-40 W High Power UHF2 (512-527 MHz) 1-25 W High Power UHF1 25-40 W High Power VHF 25-45 W Frequency 136-174 MHz (VHF) 403-470 MHz (UHF1) 450-527 MHz (UHF2) Dimensions (HxWxL) 132.6 x 482.6 x 296.5 mm Weight 14 kg Voltage Requirements 100-240 V AC (13.6 V DC) Current Drain: Standby 0.1A (100 V AC) 0.5A (240 V AC) 1.0A (typical) (13.4 V DC) Transmit Low Power 2.5A (100 VAC) 1.5A (240 VAC) 7.5A (typical) (13.4 VDC) High Power 4.0A (100 V AC) 1.8A (240 V AC) 12A (typical) (13.4 V DC) Operating Temperature Range -30°C to +60°C Max Duty Cycle 100% Frequency 136-174 MHz (VHF) 403-470 MHz (UHF1) 450-527 MHz (UHF2) Channel Spacing 12.5 kHz/ 20 kHz/ 25 kHz Frequency Stability +/- 0.5 ppm (-30° C, +60° C, +25° C) Power Output Low Power UHF1 and VHF 1-25 W High Power UHF2 (450-512 MHz) 1-40 W High Power UHF2 (512-527 MHz) 1-25 W High Power UHF1 25-40 W High Power VHF 25-45 W Modulation Limiting +/- 2.5 kHz @ 12.5 kHz +/- 4 kHz @ 20 kHz +/- 5.0 kHz @ 25 kHz FM Hum and Noise -40 dB @ 12.5 kHz -45 dB @ 20/25 kHz Conducted / Radiated Emission -36 dBm < 1 GHz -30 dBm > 1 GHz Adjacent Channel Power -60 dB @ 12.5 kHz -70 dB @ 20/25 kHz Audio Response +1, -3 dB Audio Distortion 3% Digital Vocoder Type AMBE+2 Digital Protocol ETSI-TS 102 361-1, 2 & 3 Receiver Frequency 136-174 MHz (VHF) 403-470 MHz (UHF1) 450-527 MHz (UHF2) Channel Spacing 12.5 kHz/ 20 kHz/ 25 kHz Frequency Stability +/- 0.5 ppm (-30° C, +60° C, +25° C) Analogue Sensitivity 0.30 uV (12 dB SINAD) 0.22 uV (typical) (12 dB SINAD) 0.4uV (20 dB SINAD) Digital Sensitivity 5% BER: 0.3 uV Intermodulation 70 dB Adjacent Channel Selectivity 60 dB @ 12.5 kHz, 70 dB @ 20/25 kHz Spurious Rejection 70 dB Audio Distortion @ Rated Audio 3% (typical) Hum and Noise -40 dB @ 12.5 kHz -45 dB @ 20/25 kHz Audio Response +1, -3 dB Conducted Spurious Emission -57 dBm < 1GHz For more information please contact your local Motorola Authorised Dealer or Distributor MOTOROLA and the Stylised M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2008. All rights reserved. Conforms to ETSI TS 102 361 (Parts 1, 2 & 3) - ETSI DMR Standard. Specifications subject to change without notice. MOTOTRBO will be launched with a phased introduction - please check availability of products in your region before ordering. All specifications shown are typical. Radio meets applicable regulatory requirements. DR3000/SPEC-ENG(02/09) www.motorola.com Motorola, Ltd. Jays Close, Viables Industrial Estate, Basingstoke, Hampshire, RG22 4PD, UK PRODUCT SPEC SHEET MOTOTRBO™ DM4000 SERIES MOBILE RADIOS YOUR MOBILE VOICE JUST GOT STRONGER MOTOTRBO DM4000 SERIES DIGITAL TWO-WAY MOBILE RADIOS ™ From the delivery driver crisscrossing the city to the sanitation crew clearing streets, MOTOTRBO™ can transform your enterprise and make employee interactions smarter and safer. Our best-in-class audio and exceptional data capabilities empower people like never before. Versatile and powerful, MOTOTRBO combines the best of two-way radio functionality with the latest digital technology. DM4000 Series radios integrate voice and data seamlessly, offer enhanced features that are easy to use, and deliver operations-critical advantages like integrated Bluetooth® and Intelligent Audio. The DM4000 Series can remaster your workplace and the way people collaborate to help you achieve even greater efficiency. PRODUCT SPEC SHEET MOTOTRBO™ DM4000 SERIES MOBILE RADIOS AUDIO BEYOND EXPECTATIONS RICH FUNCTIONALITY When it comes to exceptional audio clarity, the quality of digital can’t be denied. With the DM4000 Series mobiles, you get digital quality plus unique features to help your employees hear and speak clearly, wherever they work. DM4000 Series radios offer plenty of features your business seeks – including enhanced call signalling, basic and enhanced privacy-scrambling, option board expandability, the Motorola-unique transmit interrupt suite to prioritise critical communication the moment you need it and compatibility with SCADA solutions for utility and public service monitoring and alarms. Programmable button features appear on the display for easy viewing and quick access. And when workers can’t be distracted, customisable voice announcement provides audible confirmation of channel and zone changes as well as programmable button features, eliminating the need to view the display. With Intelligent Audio, the radio volume automatically adjusts to compensate for background noise so workers don’t have to adjust their radio volume to avoid missing a call in loud situations or disturbing others when they move into quiet places. Increased background noise suppression filters out unwanted external clamour – from road traffic to the roar of engines. Bluetooth® audio, built in to the radio, provides voice communication with exceptional clarity – giving your people the freedom to move without wires. Also, IMPRES™ audio accessories enhance noise suppression and improve voice intelligibility for smarter audio than they’ve ever experienced before. INTEGRATED DATA SOLUTIONS DM4000 Series radios are available with integrated GPS that enables location tracking of mobile work teams and text messaging between radios enables communication when voice isn’t feasible. The large, full-colour display operates in day or night mode, for easy viewing of contact lists, text messages and work order tickets even in bright sunlight. Models are also available that feature integrated Bluetooth enabling the radio to wirelessly interface with Bluetooth-enabled devices such as barcode scanners and magnetic card readers to facilitate the collection of critical information in the field. MOTOTRBO’s Application Developer Program is the largest in the industry and offers customised data applications that allow you to adapt your radios to your business challenges. With a wide range of solutions available, data applications answer your objectives— from work order ticket management to telephony integration, and more. HIGH-POWERED PERFORMANCE Because MOTOTRBO uses TDMA digital technology, you get integrated voice and data, twice the calling capacity and clearer voice communications. Also, the smart IMPRES™ technology in our high-powered accessories enables easier communications – everywhere your people travel. EXPANDED CAPACITY AND COVERAGE BE READY FOR THE FUTURE WITH THE RIGHT STANDARD MOTOTRBO complies with the globally-recognised European Telecommunications Standard Institute (ETSI) Digital Mobile Radio (DMR) Tier 2 standard for professional two-way radio users. DMR is widely supported by the leading two-way manufacturers in the industry and the most widely deployed digital mobile radio technology worldwide. This open standard assures long-term sustainability and creates a community of manufacturers who build interchangeable equipment that can compete on features, benefits and price. Your work crews are on the go – picking up loads, dropping off cargo, repairing roads or restoring power after a storm. That’s why you need the far-reaching performance of MOTOTRBO. IP Site Connect helps to dramatically improve customer service and productivity by using the Internet to extend coverage to create a wide area network, enhance single site coverage or link geographically dispersed locations. Capacity Plus provides single-site trunking expanding capacity to over 1,000 users. Combining the benefits of both solutions, Linked Capacity Plus is an entry-level, multi-site trunking solution that expands capacity and extends coverage so large work teams can stay connected across a wide area. So whether you want expanded coverage at a single site or across multiple ones, MOTOTRBO can be scaled to your needs. MIGRATE AT YOUR OWN PACE Keeping operations running smoothly during a change in communication systems is vital to business. It’s easy to migrate to digital with DM4000 Series radios because they operate in analogue and digital mode while the dynamic mixed mode repeater functionality streamlines automatic switching between analogue and digital calls. So you can begin using MOTOTRBO radios and repeaters on your existing analogue system, and when your time and budget allow, move to digital at your own pace. DAY-IN, DAY-OUT DURABILITY DM4000 Series mobile radios undergo Motorola’s unique Accelerated Life Testing to help ensure they will stand up to the hard knocks of everyday use. For even greater peace of mind, they are backed by a two-year Standard Warranty. PAGE 2 PRODUCT SPEC SHEET MOTOTRBO™ DM4000 MOBILE RADIOS DM4000 Series Specifications GENERAL SPECIFICATIONS DM4600 / DM4601 VHF Channel Capacity Typical RF Output VHF UHF Band 1 Up to 1,000 32 Low Power 1-25 W 1-25 W 1-25 W 1-25 W High Power 25-45 W 25-40 W 25-45 W 25-40 W 53.3 x 175.3 x 205.7 mm (2.1 x 6.9 x 8.1 in) Dimensions (H x W x L) Weight 53.3 x 175.3 x 205.7 mm (2.1 x 6.9 x 8.1 in) 1.8 kg (3.9 lbs) Standby Current Drain DM4400 / DM4401 UHF Band 1 0.81 A max 0.81 A max 0.81 A max 2 A max 2 A max 2 A max 2 A max 1-25 W: 11.0 A max 25-45 W: 14.5 A max 1-25 W: 11.0 A max 25-40 W: 14.5 A max 1-25 W: 11.0 A max 25-45 W: 14.5 A max 1-25 W: 11.0 A max 25-40 W: 14.5 A max Rx @ Rated Audio Transmit RECEIVER: DM4000 SERIES Frequencies TRANSMITTER: DM4000 SERIES VHF UHF Band 1 136-174 MHz 403-470 MHz Channel Spacing 12.5 kHz / 20 kHz / 25 kHz Frequency Stability (-30°C, +60°C, +25°C Ref) 0.3uV 0.22uV (typical) Digital Sensitivity 5% BER : 0.3uV 78 dB 75 dB Adjacent Channel Selectivity (TIA603D) 50 dB @ 12.5 kHz 80 dB @ 25 kHz 50 dB @ 12.5 kHz 75 dB @ 25 kHz Spurious Rejection (TIA603D) 80 dB 75 dB Rated Audio Audio Distortion @ Rated Audio Frequencies VHF UHF Band 1 136-174 MHz 403-470 MHz Channel Spacing 12.5 kHz / 20 kHz / 25 kHz Frequency Stability (-30°C, +60°C, +25°C Ref) ± 0.5 ppm Analogue Sensitivity (12dB SINAD) Intermodulation (TIA603D) 1.8 kg (3.9 lbs) 0.81 A max 3 W (Internal) 7.5 W (External - 8 ohms) 13 W (External - 4 ohms) 3% (typical) Hum and Noise -40 dB @ 12.5 kHz/-45 dB @ 25 kHz Audio Response TIA603D Conducted Spurious Emission (TIA603D) -57dBm ± 0.5 ppm Low Power Output 1-25 W 1-25 W High Power Output 25-45 W 25-40 W Modulation Limiting ± 2.5 kHz @ 12.5 kHz/± 5.0 kHz @ 25 kHz FM Hum and Noise -40 dB @ 12.5 kHz/-45 dB @ 25 kHz Conducted/Radiated Emission -36 dBm < 1 GHz/-30 dBm > 1 GHz Adjacent Channel Power 60 dB @ 12.5 kHz/70 dB @ 25 kHz Audio Response TIA603D Audio Distortion 3% FM Modulation 12.5 kHz: 11K0F3E / 25 kHz: 16K0F3E 4FSK Digital Modulation 12.5 kHz Voice: 7K60F1E & 7K60FXE 12.5 kHz Data: 7K60F1D & 7K60FXD Combination of 12.5 kHz Voice & Data: 7K60F1W Digital Vocoder Type Digital Protocol AMBE+2™ ETSI TS 102 361-1, -2, -3 PAGE 3 PRODUCT SPEC SHEET MOTOTRBO™ DM4000 SERIES MOBILE RADIOS MILITARY STANDARDS: DM4000 SERIES 810C Applicable MIL-STD Method 810D 810E 810F 810G Procedures Method Procedures Method Procedures Method Procedures Method Procedures 500.1 I 500.2 II 500.3 II 500.4 II 500.5 II High Temperature 501.1 I, II 501.2 I/A1,II/A1 501.3 I/A1,II/A1 501.4 I/Hot, II/Hot 501.5 I/A1, II Low Temperature 502.1 I 502.2 I/C3, II/C1 502.3 I/C3, II/C1 502.4 I/C3, II/C1 502.5 I/C3, II Temperature Shock 503.1 - 503.2 I/A1/C3 503.3 I/A1/C3 503.4 I 503.5 I/C Low Pressure Solar Radiation 505.1 II 505.2 I 505.3 I 505.4 I 505.5 I/A1 Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, III 506.5 I, III Humidity 507.1 II 507.2 II 507.3 II 507.4 - 507.5 II - Aggravated Salt fog 509.1 - 509.2 - 509.3 - 509.4 - 509.5 - Dust 510.1 I 510.2 I 510.3 I 510.4 I 510.5 I Vibration 514.2 VIII/F, Curve-W 514.3 I/10, II/3 514.4 I/10, II/3 514.5 I/24 514.6 I/24 Shock 516.2 I, II 516.3 I, IV 516.4 I, IV 516.5 I, IV 516.6 I, IV, V, VI GPS: DM4401 / DM4601 Accuracy specs are for long-term tracking (95th percentile values > 5 satellites visible at a nominal -130 dBm signal strength) TTFF (Time To First Fix) Cold Start < 1 minute TTFF (Time To First Fix) Hot Start < 10 seconds Horizontal Accuracy < 5 metres ENVIRONMENTAL SPECIFICATIONS: DM4000 SERIES Operating Temperature -30° C / +60° C Storage Temperature -40° C / +85° C Thermal Shock Per MIL-STD Humidity Per MIL-STD ESD IEC 61000-4-2 Level 3 Dust and Water Intrusion IP54, MIL-STD Specifications subject to change without notice. All specifications shown are typical. Radio meets applicable regulatory requirements. BLUETOOTH: DM4401 / DM4601 Version Supports Bluetooth® 2.1 + EDR Specification Profiles Supported Bluetooth Headset Profile (HSP), Serial Port Profile (SPP), Motorola fast push-to-talk. Devices Supported Radio supports 1 Bluetooth audio accessory and 1 Bluetooth data device simultaneously Range Class 2, 10 metres For more information on how to make sleek and stylish work for you, visit motorolasolutions.com/mototrbo or find your closest Motorola representative or authorised Partner at www.motorola.com/Business/XU-EN/Contact_Us MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2012 Motorola Solutions, Inc. All rights reserved. Motorola Solutions Ltd. Jays Close, Viables Industrial Estate, Basingstoke, Hampshire, RG22 4PD, UK EMEA version 1 (02/2012) Distributed by: mototrbo DP4000 Ex SERIES ATEX RADIO ™ Keeping you safer in the toughest environments DP4000 Ex SERIES mototrbo ™ atex digital radio MOTOTRBO ATEX SOLUTIONS: THE PROFESSIONAL CHOICE FOR DANGEROUS AREAS Threats from explosive gas, combustible dust or chemical vapours, from an oil rig to an open mine, your workers confront them daily. Safe, reliable communication is absolutely critical in such dangerous environments. That’s where the power and performance of MOTOTRBO digital radios stand out. The MOTOTRBO DP4000 Ex Series combines the best of two-way radio functionality with the latest digital technology. It integrates voice and data seamlessly, offers enhanced features that are easy to use, and delivers increased capacity to efficiently connect all your crews. With exceptional voice quality, long battery life and ATEX-rated for safety, the DP4000 Ex Series keeps your workers connected safely and productively, wherever the job takes them. TALK AND HEAR CLEARLY OVER EXCESSIVE NOISE DP4000 Ex SERIES These high-performing portables have the highest ATEX gas explosion group rating. Ideal for hazardous work with loud noise, long shifts, rough weather and dangerous conditions including combustible dust, explosive chemicals, gas leaks, flammable hydrocarbons and more. Get all the benefits of MOTOTRBO digital technology, including greater capacity, clearer audio and long battery life. Plus radios and accessories that are ATEX-certified intrinsically safe. atex dust protection: II Group II, other environments, (chemical industries, refineries, etc.) 2D High protection, Category 2 equipment for Zone 21 and 22. D = Dust Ex Explosion-proof equipment, certified to European ATEX Directive and IECEx IIIC Enclosure certified for dust Zone 21 by IP rating T130°C Maximum enclosure surface temperature atex gas protection: II Group II ‘other’ environments 2 High Protection, category 2 for Zone 1 and 2 G Gas Ex Explosion-proof equipment, certified to European ATEX Directive and IECEx ib Type of ignition protection (Zones 1&2) IIC Protection in the most explosive gas environment (hydrogen) T4 Device surface temperature will not exceed 135°C DP4401 Ex - Rugged, easy to use, non-display model DP4801 Ex (Display) DP4401 Ex (Non-Display) DP4801 Ex - Adds a full keypad and large colour display for access to advanced features like texting and caller ID atex mining protection: I M2 Ex ib I Group I Category Equipment is intended for use in underground mines as well as surface installation of such mines likely to be endangered by firedamp and/or combustible dust Explosion-proof equipment Type of ignition protection (Zones 1&2) Explosion Group, I = Methane PAGE 2 DP4000 Ex SERIES mototrbo ™ atex digital radio SO RUGGED, IT WITHSTANDS THE WORST The DP4000 Ex Series is so rugged and durable, it meets the most stringent standards and has the highest ATEX rating. Whether working in an oil refinery, chemicals factory or mine, dust and water can damage radios, but the DP4000 Ex Series is designed to withstand the worst. It meets or exceeds MIL-STD-810 for exceptional durability and is IP67 rated* to keep out damaging water and dust. The DP4000 Ex Series has also been subjected to Motorola’s unique Accelerated Life Test to simulate five years of hard use. EASY TO OPERATE The DP4000 Ex Series features large PTT, volume, channel knobs and programmable buttons that are easy to use, even when wearing gloves. The large, colour display (DP4801 Ex only) and bright LED show radio status information at a glance. Plus the prominent orange emergency button enables workers to quickly call for assistance when needed. KEEP CREWS COMMUNICATING, EVERYWHERE MOTOTRBO’s IP Site Connect uses the Internet to extend coverage to workers anywhere in the world and scalable, single-site Capacity Plus expands capacity to over 1,000 users. Linked Capacity Plus combines the high user-density call management of Capacity Plus with the wide area coverage of IP Site Connect to connect crews at various locations affordably. Use Motorola’s Application Developer Program to adapt the DP4000 Ex Series to your unique needs in the future – from location tracking using the built-in GPS receiver to text messaging or call logging and recording. When you want to share information or pinpoint crew locations, access all the right applications on one device. WORK SAFELY, FROM PIPELINE TO POWER PLANT Everything about the DP4000 Ex Series is designed for worker safety. Loud, clear performance and innovative features like Intelligent Audio and Transmit Interrupt help ensure messages get through in the noisiest environments. And like the radio, Motorola’s audio and energy accessories meet the most stringent ATEX standards. An integrated man-down and lone worker feature sends an instant alert if a mishap occurs. And the bright blue colour helps ensure workers can easily identify and carry only ATEX-approved radios into hazardous environments. EXTEND SAFETY TO LONG SHIFTS AND NOISY AREAS WITH ATEX-CERTIFIED ACCESSORIES From the drilling platform to the oil refinery, you deal with extremes - that’s why it is critical to use the only ATEX accessories designed to withstand the perils and work with these MOTOTRBO ATEX portables. BE IN THE CLEAR WITH AN IMPRES RSM The IMPRES Remote Speaker Microphone (RSM) ensures hassle free communication. Along with IMPRES audio, this microphone features Windporting which makes it easy to use in all weather conditions. PELTOR ™ HEADSETS HANDLE TOUGH SHIFTS, HEAD ON These heavy duty headsets are ATEX-certified for extreme conditions and comfortable for long shifts. Choose from the standard headset to the Tactical XP headset that allows you to control the volume to accommodate the level of ambient noise you must be alert to. These headsets are available as over-thehead or attach-to-hardhat models. PUT THE DP4000 Ex SERIES TO WORK DIGITAL PERFORMANCE DP4000 Ex meets the ETSI DMR Standard to deliver integrated voice and data, clearer voice communications, and up to 40% longer battery life than analogue. BUILT TO LAST Meets IP67 specifications* to withstand dust and immersion in 1 meter of water for 30 minutes. EXCEPTIONAL AUDIO Hear and speak clearly in loud environments, negate background noise from heavy equipment, engines and trucks. EASY TO USE Ergonomically designed for ease of use, with customisable buttons and an intuitive user interface. COMPLETE ATEXCERTIFIED SOLUTION IMPRES™ smart audio and energy accessories meet the same tough specs, for a complete system you can rely on. PMLN6089 IMPRES ™ BATTERIES AND CHARGERS Our high-capacity IMPRES battery maximizes talk time and optimizes battery cycle life – automatically. Only IMPRES batteries can be charged 150 additional times as compared to a standard battery – a 43% increase in charge cycles. This means if you charge your radios two to three times a week, you’ll get more than an extra year out of every IMPRES battery. DURABLE CARRY CASES High quality leather carry cases are designed to withstand harsh conditions in hazardous environments. Swivel belt loop cases keep the case secure while allowing the radio to swing freely as you move. PMLN6090 PMMN4067 PMLN6368 PAGE 3 DP4000 Ex SERIES mototrbo ™ atex digital radio Transmitter general specifications Frequency Band DP4801 Ex Display Portable DP4401 Ex NonDisplay Portable UHF B1 (403-470MHz) and VHF (136-174MHz) UHF B1 (403-470MHz) and VHF (136-174MHz) DP4801 Ex Display Portable Channel Spacing DP4401 Ex NonDisplay Portable 12.5/20/25KHz 12.5/20/25KHz ±0.5ppm ±0.5ppm Zone Capacity 250 2 Frequency Stability (-30° C, +60° C) Max. No. of Conv. Channels or Personality Capacity 1000 32 Power Output Dimensions (H x W x L) with Li-Ion battery 138.5 x 56.7 x 39.8mm 138.5 x 56.7 x 37.8mm Weight with Li-Ion battery 482.5g 455.5g Power Supply 7.4 V Nominal 7.4 V Nominal FCC Description UHF B1: ABZ99FT4091 VHF: ABZ99FT3089 UHF B1: ABZ99FT4091 VHF: ABZ99FT3089 Programmable Buttons 5 3 Adjacent Channel Power 60dB @ 12.5kHz, 70dB @ 20/25kHz UHF: 109AB-99FT4091 VHF: 109AB-99FT3089 Audio Response TIA603C IC Description UHF: 109AB-99FT4091 VHF: 109AB-99FT3089 ATEX: Class II 2G Ex ib IIC T4 Gb IECEx: Ex ib IIC T4 Gb ATEX: Class II 2G Ex ib IIC T4 Gb IECEx: Ex ib IIC T4 Gb FM Modulation Gas Rating Dust Rating ATEX: Class II 2D Ex ib IIIC T130 °C Db IECEx: Ex  ib IIIC T130°C Db ATEX: Class II 2D Ex ib IIIC T130 °C Db IECEx: Ex  ib IIIC T130°C Db Mining Rating ATEX: Class I M2 Ex ib I Mb IECEx: Ex ib I Mb ATEX: Class I M2 Ex ib I Mb IECEx: Ex ib I Mb Ingress Protection (IP) Rating Typical battery life with IMPRES Li-Ion (5/5/90 duty cycle) Note: No GOB, No GPS, Analogue Conventional Typical battery life with IMPRES Li-Ion (5/5/90 duty cycle) Note: No GOB, No GPS, Digital Conventional IP67* 16 hrs 16 hrs 1W 1W Modulation Limiting ±2.5kHz @ 12.5kHz ±4.0kHz @ 20kHz ±5.0kHz @ 25kHz ±2.5kHz @ 12.5kHz ±4.0kHz @ 20kHz ±5.0kHz @ 25kHz FM Hum and Noise -40dB @ 12.5kHz / -45dB @ 20/25kHz -40dB @ 12.5kHz / -45dB @ 20/25kHz Conducted / Rated Emission (ETSI) Audio Distortion (per EIA) 19 hrs TIA603C 3% 3% 12.5 kHz: 11K0F3E 25 kHz: 16K0F3E 12.5 kHz: 11K0F3E 25 kHz: 16K0F3E environmental specifications DP4801 Ex Display Portable DP4401 Ex NonDisplay Portable Operating Temperature -20°C to +55°C -20°C to +55°C Storage Temperature -40°C to +85°C -40°C to +85°C Thermal Shock MIL STD 810D, E, F, G MIL STD 810D, E, F, G Humidity MIL STD 810D, E, F, G MIL STD 810D, E, F, G ESD 19 hrs 36 dBm < 1GHz, -30 dBm > 1GHz IEC-801-2KV IEC-801-2KV Water Intrusion IEC-60529 IP67 IEC-60529 IP67 Packaging Test MIL STD 810D, E, F, G MIL STD 810D, E, F, G Receiver Channel Spacing Frequency Stability (-30° C, +60° C, +25° C) Analogue Sensitivity (12 dB SINAD) Typical Intermodulation (TIA603C) DP4801 Ex Display Portable DP4401 Ex NonDisplay Portable 12.5/20/25KHz 12.5/20/25KHz ±0.5ppm ±0.5ppm 0.25uV 0.25uV 70dB 70dB Adjacent Channel Selectivity (TIA603) - 1T 60dB @ 12.5kHz / 70dB @ 20/25kHz Adjacent Channel Selectivity (TIA603C) - 2T 45dB @ 12.5kHz / 70dB @ 20/25kHz Spurious Rejection (TIA603C) 70dB 70dB Rated Audio 0.5W 0.5W Audio Distortion @ Rated Audio For more information on how to communicate safely in unsafe places, visit motorolasolutions.com/mototrbo. Or find your closest Motorola representative or authorised Partner motorola.com/ Business/XU-EN/Contact_Us. 5%, 3% (typical) Hum and Noise -40dB @ 12.5kHz -45dB @ 20/25kHz -40dB @ 12.5kHz -45dB @ 20/25kHz Audio Response TIA603C TIA603C Conducted Spurious Emission (ETSI) -57dBm -57dBm Specifications subject to change without notice. All specifications shown are typical. Radio meets applicable regulatory requirements *DP4000 Ex Series is rated IP67 and is also certified to the highest ingress protection available under ATEX/IECEx test conditions - IP64 Motorola Solutions Ltd. Jays Close, Viables Industrial Estate, Basingstoke, Hampshire, RG22 4PD, UK MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.  © 2012 Motorola Solutions, Inc. All rights reserved. RC-4-2030 PRODUCT SPEC SHEET MOTOTRBO™ DP4000 SERIES portablE RADIOS YOUR VOICE JUST GOT STRONGER MOTOTRBO DP4000 SERIES DIGITAL TWO-WAY portable RADIOS ™ From the factory worker building components to the road crew making repairs, MOTOTRBO can transform your enterprise and make employee interactions smarter and safer. Our best-in-class audio and unrivaled data capabilities empower people like never before. Versatile and powerful, MOTOTRBO combines the best of two-way radio functionality with the latest digital technology. DP4000 Series radios integrate voice and data seamlessly, offer enhanced features that are easy to use, and deliver business-critical advantages like integrated Bluetooth® and Intelligent Audio. The DP4000 Series can remaster your workplace and the way people collaborate to help you achieve even greater efficiency. DP4800 and DP4801 are available with Roman, Cyrillic or Arabic character keypads PRODUCT SPEC SHEET MOTOTRBO™ DP4000 SERIES portablE RADIOS AUDIO BEYOND EXPECTATIONS RICH FUNCTIONALITY When it comes to exceptional audio clarity, the quality of digital can’t be denied. DP4000 Series portables give you digital audio performance throughout your coverage area plus unique features to help your employees hear and speak clearly, wherever they work. DP4000 Series radios offer plenty of features businesses seek – including enhanced call signalling, basic and enhanced privacy-scrambling, option board expandability and the transmit interrupt suite to prioritize critical communication the moment you need it. Programmable button features appear on the display for easy viewing and quick access1. And when workers can’t be distracted, customizable voice announcement provides audible confirmation of channel and zone changes as well as programmable button features, eliminating the need to view the display. With Intelligent Audio, the radio volume automatically adjusts to compensate for background noise so workers don’t have to adjust their radio volume to avoid missing a call in loud situations or disturb others when they move into quiet areas. Increased background noise suppression helps filter out unwanted external clamour – from heavy equipment to the roar of engines. Bluetooth® audio is embedded in the radio1, so no adaptor is needed when using wireless accessories. Also, IMPRES™ audio accessories enhance noise suppression and improve voice intelligibility for smarter accessories than ever before. INDUSTRY-LEADING DATA DP4000 Series radios feature integrated Bluetooth® data1, so rather than waiting until the end of a shift, busy work crews can send real time information back to the office, saving valuable hours and enabling better decision making. Integrated GPS1 enables location tracking of mobile work teams and text messaging enables communication when voice isn’t feasible. Models are available to support text entry using Roman, Cyrillic or Arabic character sets. And the large, full-colour, 5-line display operates in day or night mode, for easy viewing of contact lists, text messages and work order tickets even in bright sunlight. MOTOTRBO’s Application Developer Program offers customized data applications so you can adapt your radios to your business challenges. With the largest developer program in the industry, data applications help meet your objectives – from work order ticket management to telephony integration, and more. HIGH-POWERED PERFORMANCE Because MOTOTRBO uses TDMA digital technology, you get integrated voice and data, twice the calling capacity and clearer voice communications. When it comes to battery performance, MOTOTRBO radios operate up to 40 percent longer between recharges compared to analogue. EXPANDED CAPACITY AND COVERAGE Your workforce is hard at work every day – picking up loads, making road repairs, providing security, responding to guest requests or restoring power after a storm. IP Site Connect helps to dramatically improve customer service and productivity by using the Internet to extend coverage to create a wide area network, enhance single site coverage or link geographically dispersed locations. Capacity Plus single-site trunking expands capacity to over 1,000 users without having to add new frequencies. Linked Capacity Plus combines the expanded capacity of Capacity Plus with the wide area coverage of IP Site Connect, delivering a high capacity, wide area, and cost effective multi-site trunking solution. So whether you want coverage at a single site or across multiple ones, MOTOTRBO can be scaled to your business and budget. MIGRATE AT YOUR OWN PACE Keeping operations running smoothly during a change in communication systems is vital to any business. It’s easy to migrate to digital with DP4000 Series radios because they operate in both analogue and digital mode. To ease the transition even further, the dynamic mixed mode repeater functionality streamlines automatic switching between analogue and digital calls. So you can begin using MOTOTRBO radios and repeaters on your existing analogue system, and when your time and budget allow, move to digital at your own pace. DAY-IN, DAY-OUT DURABILITY DP4000 Series radios meet the most demanding specs, including IP57 for water submersibility and U.S. Military Standard 810 C, D, E, F, & G for exceptional durability. DP4000 radios have a two-year Standard Warranty with 1-year warranty for batteries and accessories. In addition, Service from the Start provides multi-year peace of mind with fast repair turnaround times, expert telephone technical support and access to the latest software releases2; all backed by Motorola’s globally integrated services infrastructure, highly qualified support technicians and certified repair facilities. Keep your business running smoothly with business applications: Location tracking: Monitor the whereabouts of mobile workers so they can respond immediately; in an emergency, you can pinpoint security personnel and send the nearest to the scene Integrated Bluetooth® for sharing data wirelessly and instantly between devices Dispatch consoles for centralized communication Email gateways to connect to email from your radio Network monitoring to maximize system utilization Man-down applications so radios call for help when workers can’t Telephony for communication between radios and landline or mobile phones Text messaging for quick and discreet communication Work order tickets for faster customer response PAGE 2 PRODUCT SPEC SHEET MOTOTRBO™ DP4000 SERIES portablE RADIOS DP4000 Series Specifications GENERAL SPECIFICATIONS DP4800 / DP4801 VHF Channel Capacity IMPRES Li-ion Slim (1600mAh) battery IMPRES Hi-Cap Li-ion (2250 mAh) battery IMPRES Hi-Cap Li-ion FM (2350 mAh) battery VHF DP4400 / DP4401 UHF 1000 Frequency NiMH (1400mAh) battery DP4600 / DP4601 UHF VHF UHF 1000 136-174 MHz 403-527 MHz 136-174 MHz 32 403-527 MHz 136-174 MHz 403-527 MHz (HxWxL) 130.3 x 55.2 x 38.7 mm (5.13 x 2.17 x 1.52 inch) 130.3 x 55.2 x 38.7 mm (5.13 x 2.17 x 1.52 inch) 130.3 x 55.2 x 37.2 mm (5.13 x 2.17 x 1.46 inch) Weight 425.5 g (15.01 oz) 426.5 g (15.04 oz) 393 g (13.86 oz) (HxWxL) 130.3 x 55.2 x 35.8 mm (5.13 x 2.17 x 1.41 inch) 130.3 x 55.2 x 35.8 mm (5.13 x 2.17 x 1.41 inch) 130.3 x 55.2 x 34.3 mm (5.13 x 2.17 x 1.35 inch) Weight 335.5 g (11.83 oz) 336.5 g (11.87 oz) 303 g (10.69 oz) (HxWxL) 130.3 x 55.2 x 41.1 mm (5.13 x 2.17 x 1.62 inch) 130.3 x 55.2 x 41.1 mm (5.13 x 2.17 x 1.62 inch) 130.3 x 55.2 x 39.6 mm (5.13 x 2.17 x 1.56 inch) Weight 355.5 g (12.54 oz) 356.5 g (12.58 oz) 323 g (11.39 oz) (HxWxL) 130.3 x 55.2 x 41.1 mm (5.13 x 2.17 x 1.62 inch) 130.3 x 55.2 x 41.1 mm (5.13 x 2.17 x 1.62 inch) 130.3 x 55.2 x 39.6 mm (5.13 x 2.17 x 1.56 inch) Weight 365.5 g (12.89 oz) 366.5 g (12.93 oz) 333 g (11.75 oz) Power Supply 7.5 V (Nominal) Operating Temperature -30 ~ +60 °C3 Battery Average Battery Life 5/5/90 duty cycle with carrier squelch and transmitter in high power4 NiMH (1400mAh) battery Analogue: 6.7 hrs/ Digital: 9.8 hrs Analogue: 7 hrs/ Digital: 10.2 hrs Analogue: 7 hrs/ Digital: 10.2 hrs IMPRES Li-ion Slim (1600mAh) battery Analogue: 7.7 hrs/Digital: 11.3 hrs Analogue: 8 hrs/Digital: 11.8 hrs Analogue: 8 hrs/Digital: 11.8 hrs IMPRES Hi-Cap Li-ion (2250 mAh) battery Analogue: 11.1 hrs/Digital: 16.2 hrs Analogue: 11.5 hrs/Digital: 17 hrs Analogue: 11.5 hrs/Digital: 17 hrs IMPRES Hi-Cap Li-ion FM (2350 mAh) battery Analogue: 11.9 hrs/Digital: 17.3 hrs Analogue: 12.3 hrs/Digital: 18.1 hrs Analogue: 12.3 hrs/Digital: 18.1 hrs RECEIVER Frequencies Channel Spacing Frequency Stability (-30°C, +60°C, +25°C Ref) Analogue Sensitivity (12dB SINAD) Digital Sensitivity Intermodulation (TIA603D) TRANSMITTER VHF UHF 136-174 MHz 403-527 MHz 12.5/20/25kHz ± 0.5 ppm Frequency Stability Low Power Output 0.25 uV (0.19 uV typical) High Power Output 70 dB 60dB @ 12.5 kHz / 70dB @ 20/25kHz Adjacent Channel Selectivity (TIA603D)-2T 45dB @ 12.5 kHz / 70dB @ 20/25kHz Spurious Rejection (TIA603D) 70 dB Rated Audio 0.5W 5% (3% typical) Hum and Noise -40dB @ 12.5 kHz / -45dB @ 20/25kHz Audio Response TIA603D Conducted Spurious Emission (TIA603D) -57dBm VHF UHF 136-174 MHz 403-527 MHz Channel Spacing 0.3uV (0.22uV typical) Adjacent Channel Selectivity (TIA603A)-1T Audio Distortion @ Rated Audio Frequencies 12.5/20/25kHz ± 0.5 ppm 1W 1W 5W 4W Modulation Limiting ± 2.5kHz @ 12.5 kHz / ±4.0kHz @ 20kHz / ± 5.0kHz @ 25 kHz FM Hum and Noise -40dB@ 12.5 kHz / -45dB@ 20/25kHz Conducted/Radiated Emission Adjacent Channel Power -36 dBm < 1GHz / -30 dBm > 1GHz 60dB @ 12.5 kHz / 70dB @ 20/25kHz Audio Response TIA603D Audio Distortion 3% 12.5 kHz Data: 7K60F1D & 7K60FXD 4FSK Digital Modulation 12.5 kHz Voice: 7K60F1E & 7K60FXE Combination of 12.5 kHz Voice & Data: 7K60F1W Digital Vocoder Type Digital Protocol AMBE+2™ ETSI TS 102 361-1, -2, -3 PAGE 3 PRODUCT SPEC SHEET MOTOTRBO™ DP4000 SERIES portablE RADIOS GPS FACTORY MUTUAL APPROVALS Accuracy specs are for long-term tracking (95th percentile values>5 satellites visible at nominal -130 dBm signal strength) MOTOTRBO DP4000 Series portable radios have been certified by FM in accordance with U.S. Codes as intrinsically safe for use in Class I, II, III, Division 1, Groups C, D, E, F, G, when properly equipped with a Motorola FM approved battery option. They are also approved for use in Class I, Division 2, Groups A, B, C, D. TTFF (Time To First Fix) - Cold Start < 60 seconds TTFF (Time To First Fix) - Hot Start < 10 seconds Horizontal Accuracy < 5 metres 1 Optional feature only supported on selected radio models 2 Software release covers patches and maintenance releases of the current version to the operating system i.e. that shipped with the terminal. 3 Radio only - Li-Ion battery -10C 4 Actual battery runtime observed may vary based on the use of certain features such as GPS, Bluetooth, and Expansion Card based applications.  ENVIRONMENTAL SPECIFICATIONS BLUETOOTH Version Supports Bluetooth® 2.1 + EDR Specification Profiles Supported Bluetooth Headset Profile (HSP), Serial Port Profile (SPP), Motorola fast push-to-talk. Devices Supported Radio supports 1 Bluetooth audio accessory and 1 Bluetooth data device simultaneously Range Operating Temperature -30° C / +60°C3 Storage Temperature -40° C / +85°C Thermal Shock Per MIL-STD Humidity Per MIL-STD ESD IEC 61000-4-2 Level 3 Dust and Water Intrusion IEC 60529 - IP57 Specifications subject to change without notice. All specifications shown are typical. Radio meets applicable regulatory requirements. Class 2, 10 metres Testing completed using portable radio with attached battery and antenna. MILITARY STANDARD 810C Applicable MIL-STD 810D 810E 810F 810G Method Procedures Method Procedures Method Procedures Method Procedures Method Procedures Low Pressure 500.1 I 500.2 II 500.3 II 500.4 II 500.5 II High Temperature 501.1 I, II 501.2 I/A1,II/A1 501.3 I/A1,II/A1 501.4 I/Hot, II/Hot 501.5 I-A1, II Low Temperature 502.1 I 502.2 I/C3, II/C1 502.3 I/C3, II/C1 502.4 I-C3, II/C1 502.5 I, II Temperature Shock 503.1 - 503.2 I/A1/C3 503.3 I/A1/C3 503.4 I 503.5 I-C Solar Radiation 505.1 II 505.2 I 505.3 I 505.4 I 505.5 I-A1 Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, III 506.5 I, III Humidity 507.1 II 507.2 II 507.3 II 507.4 - 507.5 II Salt fog 509.1 - 509.2 - 509.3 - 509.4 - 509.5 - Dust 510.1 I 510.2 I 510.3 I 510.4 I 510.5 I Vibration 514.2 VIII/F, Curve-W 514.3 I/10, II/3 514.4 I/10, II/3 514.5 I/24 514.6 II/5 Shock 516.2 I, II 516.3 I, IV 516.4 I, IV 516.5 I, IV 516.6 I, IV, VI For more information on how to strengthen your portable voice, visit motorolasolutions.com/mototrbo or find your closest Motorola representative or authorised Partner at motorola.com/Business/XU-EN/Contact_Us Distributed by: MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2013 Motorola Solutions, Inc. All rights reserved. Motorola Solutions Ltd. Jays Close, Viables Industrial Estate, Basingstoke, Hampshire, RG22 4PD, UK EMEA version 2 (02/2013)