Transcript
96-973 / rev 3b / 9-30-13
DRR-44 Series Double Tapped Relay Racks Middle Atlantic Canada, Inc.
EIA
Compliant
™
EXCEPTIONAL SUPPORT & PROTECTION
The DRR-44 Series 19” Double Tapped Relay Rack Heavy duty welded steel construction for added strength Features • Solid fully welded steel construction for structural integrity • 1/8” thick steel rail channels are 10-32 threaded front and rear • Heavy duty 3/8” thick steel base • Hole pattern on sides of rail allows for cable lacing and easy ganging to existing racks • Hole pattern on top allows for installation of a variety of cable ladders • Grounding stud installed in base • Durable black powder coat finish DRR-44 shown with RLA-CC and DCC-T
• Ships assembled and ready to install
Architects’ and Engineers’ Specifications OPTIONS • Horizontal Lacer Bars shall be model # LBP-1X, please see master catalog for available styles • Horizontal cable managers shall be model # HCM-X, please see master catalog for available styles • Hinged horizontal cable managers shall be model # HHCM-1 (1 rackspace), HHCM-2 (2 rackspaces) • Rackmount Cable Tray shall be model # HCT-1 (1 rackspace), HCT-2 (2 rackspaces) • Vented Center Mount shall be model # U2MS
C U S T O M I Z A B L E S P E C I F I C AT I O N C L I P S AVA I L A B L E AT M I D D L E AT L A N T I C . C O M
Canada: Ottawa, ON • Burnaby, BC • Voice: 613-836-2501 Fax: 613-836-2690 • www.middleatlantic.ca
96-973 / rev 3b / 9-30-13 / DRR-44 Series
EIA compliant 19” relay rack shall be Middle Atlantic Canada model # DRR-44 with a 15” deep base and 44 rack units of vertical space. Rack shall be welded and include two 3-1/4” wide, 11-gauge steel vertical channels with 10-32 tapped mounting holes with marked rackspace increments to speed equipment mounting. Base shall be 3/8” thick steel and include one 1/4-20x1 grounding stud. Cable carrier shall be Middle Atlantic Products model # RLA-CC, constructed of 16-gauge steel. RLA-CC shall include solid steel hinged door with three-point magnetic closure. Cable management features shall include 4” wide opening for cable pass-through on front of cable carrier, fifty-three 3”H x 2.25”W cable pass-through points on sides and back, and thirty-six raised bridge lances for cable lacing. Cable carrier dimensions shall be 82.7”H x 6”D x 5”W. Telescoping cable chimney shall be Middle Atlantic Products model # DCC-T, constructed of 16-gauge steel. DCC-T shall be used with the RLA-CC cable carrier and be fully adjustable in height from 23.97” to 35.97” with a cable passage opening of 6” x 5”. Cable pass-through features shall include one 4” x 4.9” removable plate on each side, a 3” x 3” opening on rear and a 3.75” x 5.75” front opening with lift up lid.
11.00
DRR-44 TOP VIEW 16.00
TOP VIEW
21.50
FRONT VIEW
15.00
.75 (dia.) mounting holes
1.875
83.00
77.00 (44 SPACE)
4.00
SIDE VIEW
DRR-44 Series Basic Dimensions
3.27
GANGING POINTS
CABLE LACING POINTS
GROUND STUD 1/4 - 20X1
SIDE VIEW
All dimensions in inches unless otherwise noted
FRONT VIEW
RLA-CC
5.25 [133]
RLA-CC (optional)
Cable entry points top and bottom
Solid hinged door with 3-point magnetic closure
DCC-T 6.0
Standard 11-gauge, 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting
5.0
4.9
6.22
BOTTOM VIEW
5.16
TOP VIEW
Height infinitely adjustable from 23.97 35.97
DRR-44 with RLA-CC
4.0
SIDE VIEW
Middle Atlantic Canada, Inc.
Canada: Ottawa, ON • Burnaby, BC • Voice: 613-836-2501 Fax: 613-836-2690 • www.middleatlantic.ca
