Transcript
DRV-410 GPS Integrated Dashboard Camera
INSTRUCTION MANUAL GPS Integrated Dashboard Camera
MODE D’EMPLOI
GPS Integrated Dashboard Camera
MANUAL DE INSTRUCCIONES
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DRV-410 Serial number US Residents Only
Register Online Register your Kenwood product at www.Kenwoodusa.com © 2016 JVC KENWOOD Corporation
B5A-0959-02 (K)
CONTENTS Precautions for Use.................................................................................................................... 7 How to Install.............................................................................................................................. 8 How to Wire............................................................................................................................... 10 Names and Functions of Parts................................................................................................. 11 Before Using the Driving Support Function........................................................................... 12 Basic Operations....................................................................................................................... 13 Recording.................................................................................................................................. 16 Playback.................................................................................................................................... 17 Protecting or Deleting Files..................................................................................................... 18 Various Settings........................................................................................................................ 19 Using the PC Application......................................................................................................... 24 Troubleshooting....................................................................................................................... 28 Appendix................................................................................................................................... 31 Specifications............................................................................................................................ 34
• The screen images and operation examples in this document were created for explaining the operating procedures. There may be screen images that differ from the actual screens or examples of operations not actually performed. • Unless otherwise specified, microSDHC cards are referred to as SD cards in this document. • The latest instruction manual, firmware update information, etc. are available at the JVC KENWOOD website. Please visit the following website. http://www.kenwood.com/cs/ce/ Disclaimer • Please note that JVC KENWOOD shall not be responsible for any damages suffered by the customer or a third party as a result of incorrectly using this product, a failure during use of this product, or other trouble, or due to the use of this product, unless such liability is acknowledged by law.
Copyrights • Recorded video, image, and audio content cannot be used for other than personal enjoyment without the consent of the copyright holder as specified in the Copyright Act. • Please note that the recording of an event such as a show, performance, or exhibition may be restricted even when doing so for personal enjoyment.
English 3
Precautions and notices Warning! Do not operate the device while driving. Using this product does not change the requirement for a driver to take full responsibility for his or her behavior. This responsibility includes observing all traffic rules and regulations in order to avoid accidents, personal injury or property damage. • For your own safety, do not operate the controls of the product while driving. • A window mount is needed when using the recorder in a car. Make sure that you place the recorder in an appropriate place, so as not to obstruct the driver’s view or deployment of airbags. • Make sure that no object is blocking the camera lens and no reflective material is placed near the lens. Please keep the lens clean. • If the car’s windscreen is tinted with a coating, it may impact the recording quality. • Connect the charger to a proper power source. The voltage requirements are found on the product case and/or packaging. • Do not use the charger if the cord becomes damaged. • Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.
4
Caring for your device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage. • Keep your device away from excessive moisture and extreme temperatures. • Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time. • Do not place anything on top of your device or drop objects on your device. • Do not drop your device or subject it to severe shock. • Do not subject your device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage your device. In the event of moisture condensation, allow the device to dry out completely before use. • The screen surface can easily be scratched. Avoid touching it with sharp objects. Nonadhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches. • Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device. • Do not use paper towels to clean the screen. • Never attempt to disassemble, repair or make any modifications to your device. Disassembly, modification or any attempt at repair could cause damage to your device and even bodily injury or property damage and will void any warranty. • Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your device, its parts or accessories. • To discourage theft, do not leave the device and accessories in plain view in an unattended vehicle. • Overheating may damage the device.
5
FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
6
Precautions for Use Precautions for Installation
Precautions for Use
• Install the device in a position where it will not block the front view of the driver (position where hidden by the rear-view mirror). • Install the device so that it is within the wiping range of the wiper. • Install the device in a position where it will not interfere with the movement of the rear-view mirror. • Take care not to install the device over the vehicle inspection sticker or other sticker. • Take care not to install the device where it will interfere with driving or airbag operation. • When installing the device in a vehicle equipped with a driving support system, check the instruction manual of the vehicle and then select an installation location that will not interfere with the driving support system. • If the device is installed incorrectly, event recording or parking recording may not work correctly. Refer to "How to Install" for the loosening of fixing knob, installation orientation, installation angle, and other information and then install the device correctly. (ÁP.8) • Do not install the device near a digital terrestrial television antenna or an electrical component. Doing so may reduce television receiver sensitivity or cause flickering and noise. • Use a commercially available cleaning cloth or the like to wipe off all dirt and grease on the mounting surface and then fix the mount base in place. If the device is re-affixed or mounted using, for example, general-purpose double-sided tape, the adhesion strength may weaken and cause the device to fall. • After mounting the device, leave it for 24 hours before use to enable the mounting strength of the mount bracket to improve. Failing to do so may result in the adhesion of the mount bracket becoming weak and the device falling. • Fix the cord in place with tape or the like so that it does not interfere with driving.
• Do not block the camera lens, get dirt on it, or place a reflective object near it. • When LED traffic lights are recorded, video in which they appear to be flickering or flashing may be recorded. JVC KENWOOD assumes no responsibility with regard to the distinguishing or recording of traffic lights. • If coating is used on the windshield of the vehicle, recording quality may be affected. • There is no guarantee that the device can record video in all conditions.
Cleaning the Device • When the device is dirty, wipe it with a dry silicone cloth or other soft cloth. If the device is very dirty, remove the dirt with a cloth with neutral cleaner on it and then wipe off the cleaner. Wiping the device with a hard cloth or using using a volatile substance such as thinner or alcohol may cause scratches, deformation, deterioration, or other damage. • When the lens is dirty, gently wipe it with a soft cloth dampened with water. Rubbing the lens strongly with a dry cloth may cause scratches.
If You Notice a Problem with the Device If you notice a problem with the device, first refer to "Troubleshooting" (ÁP.28) and check whether there is a way to resolve the problem. If you are unable to find a way to resolve the problem, press the [MENU/OK] button on the device for at least 25 seconds to reset the device. When the power turns off after resetting the device, press the [MENU/OK] button for at least 1 second to turn on the power. (ÁP.11) If the device does not return to normal after the reset, turn off the power of the device and then contact your dealer or nearest JVC KENWOOD service center.
7
How to Install Installation Procedure Check that the vehicle is parked on a level surface.
1. Attach the device to the mount bracket. (accessory)
Insert the mount bracket into the bracket attachment part of the device and attach it to the device.
Mount bracket
4. Perform the cord wiring work.
Refer to "How to Wire" and then perform the wiring work. (ÁP.10)
5. Adjust the installation angle of the
device and then fix the device in place. Turn the angle adjustment knob clockwise before adjustment. When adjusting the installation angle, check that the camera field of view is parallel to a level ground surface and that the ratio of the sky and ground are the same. After adjusting the installation angle, turn the angle adjustment knob of the adjustment bracket counterclockwise to fix the device in place. Adjustment example
Camera lens side
2. Determine where to mount the device.
Determine the mounting position in reference to "Recommended installation position."
3. Clean the mounting surface and then affix the device to the windshield.
Use a commercially available cleaning cloth or the like to wipe off all dirt and grease on the mounting surface. Peel off the release paper of the double-sided tape on the mount bracket and push the bracket against the windscreen to affix it in place. Leave the device for 24 hours before use to enable the mounting strength of the mount bracket to improve.
Windshield Angle adjustment knob
Rear-view mirror
Release paper
8
• If you will use the driving support function, you need to make the adjustments described in "Adjusting the Settings to Match the Vehicle." (ÁP.12) • Make the adjustments described in "Adjusting the Settings to Match the Vehicle" in a location with a level surface and a sight distance of about 200 m. (ÁP.12)
Recommended installation position • Install the device in a position where it will not block the front view of the driver (position where hidden by the rear-view mirror). • Install the device so that it is within the wiping range of the wiper. • Mounting the device to the center of the windshield behind the rear-view mirror will facilitate optimal video recording.
Outside vehicle
Windshield
Ceramic part
Doublesided tape Clip
Inside vehicle
Rear-view mirror
Power cord
Front pillar cover Soft tape* Power cord
Airbag * Fix the power cord in place with commercially available soft tape or the like.
Front pillar
CAUTION When passing the power cord through the front pillar or another part, observe the following points when performing the wiring work. • Wire the power cord farther forward or farther rearward than the airbag so that it does not interfere with the airbag. • In the case of a vehicle in which the front pillar cover is fixed in place with special clips or the like, the clips may need to be replaced after you remove the front pillar cover. For how to remove the front pillar cover, the availability of replacement parts, and other information, contact the vehicle dealer. • Fix the power cord in place with commercially available soft tape or the like so that it does not interfere with driving.
9
How to Wire Connecting the cigarette lighter plug cord (accessory) Connect the drive recorder and power cord of the cigarette lighter plug cord. When disconnecting the power cord, disconnect it while pressing the hook of the connector.
Cord length (4 m)
Drive recorder Connect the cigarette lighter plug to the cigarette lighter socket.
Power cord for Dashboard Camera (accessory)
CAUTION
Before performing the connection work, first check that the engine key is removed and then be sure to disconnect the negative terminal of the battery to prevent a short accident. Connect the Dashboard Camera and power cord.
Dashboard Camera Cord length (3.5 m)
Ignition key switch
Accessory cord (Red) Fuse
Accessory power supply
Connect to a power supply that can be turned on and off with the switch.
ACC Fuse (2 A) BATT
Battery cord (Yellow) Connect to a power supply with a voltage always applied regardless of whether or not the engine key is on or off at a point after the power has passed through the main fuse.
Main fuse
Ground cord (Black) Battery
10
GND
Connect to a metal part of the vehicle (part of the chassis with an electrical connection to the negative side of the power supply).
Names and Functions of Parts 1
4 5 6 7
0
8 2
9
3
@ ! 1 Bracket attachment part
8 K button
• Press this button dur ing continuous recording to take a photo. • Press this button during playback to play the next file. • Hold down this button during playback to fast-forward, and hold it down while playback is paused to play slowly in the forward direction. Release this button during fast-forwarding to play, and release it during forward slow playback to pause. • Press this button during menu display to go to the next item.
Attach the supplied mount bracket.
2 Camera lens 3 Speaker Outputs voice guidance, warning sounds, and file playback audio.
4 Power cord connector terminal Connect the supplied cigarette lighter plug cord or the Dashboard Camera power cable.
5 J button
• Press this button during playback to play the previous file. • Hold down this button during playback to rewind, and hold it down while playback is paused to play slowly in the reverse direction. Release this button during rewinding to play, and release it during reverse slow playback to pause. • Press this button during menu display to return to the previous item.
6 MENU/OK button
• Hold down this button to turn on or off the power of the device. • Press this button to display the MENU screen. • This button functions as the OK button during menu display. • Hold down this button for at least 25 seconds to reset the device.
7 Microphone Records audio.
9 Monitor screen 0 SD card slot Insert an SD card for recording.
! Indicator Lights when the power of the device turns on.
@
button
• Press this button dur ing continuous recording to start manual recording. • Each press of this button during playback switches between the paused and playback states. • Press and hold this button during playback or menu setting to return to continuous recording. • This button functions as the cancel, back, or exit button during menu display.
11
Before Using the Driving Support Function Adjusting the Settings to Match the Vehicle Before using the driving support function, set the mounting height of the device from the road surface and adjust the horizon and bonnet front edge position settings to match the vehicle.
1.
Press the [MENU/OK] button. MENU appears.
5. Use the [J]/[K] buttons to select
and then press the [MENU/OK] button. 1 2 1
6. Press the [MENU/OK] button, use the [J]/[K]
buttons to align the guide line with the horizon, and then press the [MENU/OK] button. Adjust as shown in the figure.
2.
Use the [J]/[K] buttons to select and then press the [MENU/OK] button.
2 1
1
2
7. Press the [MENU/OK] button, use the
2 1
3.
Use the [J]/[K] buttons to select and then press the [MENU/OK] button. 1
[J]/[K] buttons to align the guide line with the bonnet front edge, and then press the [MENU/OK] button. Adjust as shown in the figure.
2 1
3 2
2 1
4. Use the [J]/[K] buttons to select the
mounting height from the road surface and then press the [MENU/OK] button. 1 2 1
12
3
8. Hold down the [
end the procedure.
] button to
• For the mounting height setting, set the nearest height among the setting options. • In the case of a vehicle for which the bonnet front edge cannot be seen, lower the guide line to the lowest position at which the center of the road surface is not hidden by the body or a part of the vehicle and then set the setting. • The driving support function is set to "OFF" by default (ÁP.21).
Basic Operations Inserting and Removing an SD Card
Formatting an SD Card
Turn off the power of the device and then insert an SD card into the SD card slot until you hear a clicking sound. Be careful with regard to the orientation of the card.
Before using an SD card, first format (initialize) it with the device.
1. Insert the SD card into the SD card slot. 2. Press the [MENU/OK] button. MENU appears.
To remove the SD card, turn off the power of the device and then press the SD card so that it pops up and remove the SD card by pulling it out. • Be sure to format an SD card with the device. • When an SD card is formatted, all files including protected files are deleted.
3. Use the [J]/[K] buttons to select
and then press the [MENU/OK] button. 1
Turing the Power On/Off Turning on the accessories power (ACC) switch or starting the engine of the vehicle turns on the power of the device and starts continuous recording. When the device is connected using the power code (ÁP.10), turning off the accessories power (ACC) turns off the power of the device and switches to parking recording mode.
2 1
4. Use the [J]/[K] buttons to select
and then press the [MENU/OK] button.
To Turn the Power On/Off Manually When the accessories power (ACC) is on, the power of the device can be turned on or off manually.
• Hold down the [MENU/OK] button for at least 3 seconds while the device is on to turn off the power. • Hold down the [MENU/OK] button for at least 1 second while the device is off to turn on the power. • When the power has been turned off manually, power is consumed because the device is in standby. • There are vehicle models such as some imported vehicles for which the power to the cigarette lighter is not cut off even when the engine is turned off. To protect the battery, remove the cigarette lighter plug when you get out of the vehicle.
1 2 1
5. Press the [MENU/OK] button to end the procedure.
13
Basic Operations Recording Modes The device has four recording modes. Turning on the power of the device starts continuous recording. The recorded video is recorded as files to the SD card. The recording files are sorted into a separate folder for each recording mode.
Continuous recordings Turning on the power of the device starts continuous recording. In continuous recording mode, files are deleted in order from the oldest to record when there is no recording area remaining. Continuous Elapsed time → recording • The recording data is saved to the continuous recordings folder. • The recording time of one file can be set in "Continuous recording file length" (ÁP.20).
Manual recording Pressing the [ ] button on the device during continuous recording starts manual recording. The recording time of manual recording is the 10 seconds before manual recording plus the time set in "Manual recording time" (ÁP.20). If you wish to extend the recording time, press the [ ] button again. When manual recording ends, the mode returns to continuous recording. Manual recording (If the button is pressed during manual recording, the recording time is extended from that point by the amount of recording time set for manual recording.) Continuous Elapsed time → recording Manual recording Records 10 seconds before manual recording
Manual recording (set time)
• The recording data is saved to the manual recordings folder. • The recording time of one file is a maximum of one minute. If the recording time exceeds one minute, the file is split to record. • When 10 files will be exceeded, manual recording cannot be performed (when 8 GB SD card). When "Overwrite (manual)" is set to "ON," files are deleted in order from the oldest to record (ÁP.20). Back up the recording data you wish to keep to a PC or other device if necessary.
14
Event recording The detection of a sudden collision, unexpected collision, or other event during continuous recording starts event recording. The recording time of event recording is the 10 seconds before collision detection plus the time set in "Event recording time" (ÁP.20). When event recording ends, the mode returns to continuous recording. Collision detected Continuous Elapsed time → recording Event recording Records 10 seconds before Event recording (set time) collision detection • The recording data is saved to the event recordings folder. • The recording time of one file is a maximum of one minute. If the recording time exceeds one minute, the file is split to record. • If a collision is detected during event recording, event recording is extended. • When five files will be exceeded, event recording cannot be performed (when 8 GB SD card). When "Overwrite (event)" is set to "ON," files are deleted in order from the oldest to record (ÁP.20). Back up the recording data you wish to keep to a PC or other device if necessary.
Parking recording Turning off the accessories power (ACC) turns off the power of the device and switches to parking recording mode to perform vehicle collision monitoring. If the vehicle is subjected to a collision, the power of the device turns on and parking recording starts. When parking recording ends, vehicle collision monitoring resumes. Collision detected Elapsed time →
Collision monitoring Parking recording
Parking recording (set time)
• Parking recording mode is available only when the device is connected using the power code (ÁP.10) • The recording data is saved to the parking recordings folder. • Parking recording starts a few seconds after the vehicle is subjected to a collision. • The monitor screen is not displayed during parking recording. • When 20 files will be exceeded, parking recording cannot be performed (when 8 GB SD card). Delete any unnecessary data or back up the recording data you wish to keep to a PC or other device if necessary. You can confirm whether there is an excess number of files with the "8 Number of files exceeded" indicator on the recording screen (ÁP.16). • If parking recording is performed, a notification on the screen informs you that parking recording has been performed when the power turns on. • Parking recording cannot be performed when "Recording time" is set to "OFF" (ÁP.20). • Parking recording may sometimes be performed as result of detecting vibration when a door is closed.
15
Recording Recording at Any Location (Manual Recording) Pressing the [ ] button on the device during continuous recording allows you to record manually whenever you wish.
1. Press the [
Taking a Photo Pressing the [K] button on the device during continuous recording allows you to take a photo whenever you wish.
1. Press the [K] button.
] button.
Manual recording starts and then the mode returns to continuous recording after the time set for the recording time of manual recording elapses. • If you wish to take another photo, press the [K] button again. • A photo cannot be taken when the device is not recording such as during playback or when configuring menu settings. • If you wish to extend the recording time, press the [ ] button again. • The recording time of manual recording i s t h e 1 0 s e c o n d s b e fo re m a n u a l recording plus the time set in "Manual recording time." (ÁP.20) • Recording cannot be performed during folder or file selection, playback, deletion, and setting.
Recording at Any Location (Forcibly Recording) Forcibly start recording even during playback or menu display.
1. Hold down the [
] button.
Playback or menu display stops and continuous recording resumes.
Recording screen indicators
1
4 56
2
3
7 8 9
1 Recording mode 2 Time 3 GPS reception state 4 Resolution (3M: 2304x1296, FHD: 1920x1080, or HD: 1280x720)
5 Audio recording 6 HDR recording 7 Remaining manual recording or event recording time
8 Number of files exceeded (manual recording, event recording, parking recording, or photos)
9 Photo taking
16
Playback Playing Files Select a file such as a recording file or photo and start playback.
1. Press the [MENU/OK] button.
4. Use the [J]/[K] buttons to select the
file you wish to play and then press the [MENU/OK] button and press the [ ] button. Playback of the selected file begins.
MENU appears.
1 2 1
2. Use the [J]/[K] buttons to select and then press the [MENU/OK] button.
Pressing the [ J ] or [K] button during playback plays the previous or next file or photo.
To return to continuous recording Hold down the [
1 2 1
3. Use the [J]/[K] buttons to select
the folder you wish to play and then press the [MENU/OK] button.
] button.
• Files are listed in their recording or capture order. • Recording is stopped while selecting a folder or file and during playback. Also, ] manual recording using the [ button does not work.
Playback screen indicators
1
2
3
The video for the most recent file in the selected folder is displayed.
1 2 1 Continuous recordings
4 There are continuous recording files.
Manual recordings There are manual recording files. Event recordings
There are event recording files.
Parking recordings There are parking recording files. Still images
There are still image files.
56
1 Recording file playback state or photo file indication
2 Play time 3 Play position 4 Recording file name, date, and time 5 File protection 6 Number of file playing/total number of files
17
Protecting or Deleting Files Operation with the Playback Menu
4. Press the [MENU/OK] button to end the procedure.
Protect or delete files such as event recording files or photos. You can also delete all of the files in a folder.
1. Select a file or photo to play. 2. Press the [MENU/OK] button, use the
[J]/[K] buttons to select an item, and press the [MENU/OK] button. 1 2 1
Return
Returns to folder selection.
Delete file
Deletes a file that is not protected.
Delete folder
Deletes all files in the folder that are not protected.
Protect file
Protects the file so that it will remain even if an attempt to overwrite or delete it is made.
Remove file protection
Removes file protection.
3. Use the [J]/[K] buttons to select
and then press the [MENU/OK] button. 1 2 1
18
• Continuous recording files cannot be protected. • To delete a protected file, remove file protection. • When an SD card is formatted, all files including protected files are deleted.
Various Settings Operation with MENU Perform operations such as playback and configuring video recording settings on the MENU screen.
1. Press the [MENU/OK] button.
The MENU screen of step 2 changes in the following order.
Playback
MENU appears.
Parking recording settings
2. Use the [J]/[K] buttons to select an
item and then press the [MENU/OK] button.
Video recording settings
1 2
Driving support settings
1 Repeat the same operation according to the selected item.
3. Hold down the [
end the procedure.
] button to System settings
• Except for the recording described in "Recording at Any Location (Forcibly Recording)," recording is not possible while the menu is displayed. (ÁP.16)
Format SD card
Update system
19
Various Settings MENU
* Factory default settings
Playback Continuous recordings Manual recordings Event recordings Parking recordings Still images
Select the desired folder from the list screen and play a file. (ÁP.17) Files can also be protected or deleted during playback. (ÁP.18)
Parking recording settings Recording time Overwrite
Sensitivity settings
OFF/10 sec*/20 sec/30 sec Set the recording time for parking recording after collision detection. ON*/OFF Set whether or not to overwrite old files when the maximum number of recording files will be exceeded. 1(Low)/2/3(Mid)*/4/5(High) Set the sensitivity for detecting a vehicle collision while parked. 1: Detects large collisions, 3: Standard, 5: Detects small collisions
Video recording settings Audio recording
ON*/OFF Set whether or not to record audio with the microphone during recording. Continuous recording file 1 min*/2 min/3 min length Set the recording time for continuous recording. The recording is divided each time the recording time elapses. Manual recording time 15 sec*/30 sec/1 min Set the recording time for manual recording. The recording time for before manual recording is set to 10 seconds. Event recording time 15 sec*/30 sec/1 min Set the recording time for after collision detection. The recording time for before vehicle collision detection is set to 10 seconds. Overwrite (manual) ON/OFF* Set whether or not to overwrite old files when the maximum number of recording files will be exceeded. Overwrite (event) ON/OFF* Set whether or not to overwrite old files when the maximum number of recording files will be exceeded. 3M (2304x1296)/1920x1080*/1280x720 Resolution Set the resolution for recording. HDR recording ON*/OFF Setting this to ON records subjects by reducing overexposure and loss of dark detail even when capturing scenes with high light-dark contrast. HDR cannot be set to ON when the resolution is 3M. Sensitivity settings 1(Low)/2/3(Mid)*/4/5(High) Set the sensitivity for detecting a vehicle collision. 1: Detects large collisions, 3: Standard, 5: Detects small collisions
20
Driving support settings Forward collision warning
Lane departure warning
Departure delay warning
Detection range settings Mounting height settings
ON/OFF* Detects the distance between your vehicle and the vehicle in front and notifies with a warning sound to prevent a collision with the vehicle in front if a safe distance is not maintained. This operates at 30 km/h and faster. ON/OFF* Detects the lane your vehicle is driving in and notifies with a warning sound when your vehicle is departing from the current lane. This operates at 60 km/h and faster. ON/OFF* When your vehicle is stopped behind the vehicle in front and then the vehicle in front begins moving, a warning sign notifies if your vehicle is late to begin moving. A warning sound is also output when, for example, your vehicle moves backward. Before using the driving support function, adjust the horizon and bonnet front edge position settings to match the vehicle. (ÁP.12) 1.2 m*/1.35 m/2 m Set the mounting height of the device from the road surface. (Á P.12)
System settings Date/time Daylight saving time Notification volume Playback volume
Automatic*/Manual Set the date and time automatically or manually. (ÁP.22) OFF*/+1 hr./+30 min Set daylight saving time. Set the notification volume to any of six levels (mute to maximum).
Factory reset
Set the recording video playback volume to any of six levels (mute to maximum). Always on*/10 sec/1 min/3 min Set the screen display time. English*/Français/Español Change the display language for the MENU screen, etc. km/h/MPH* Switch to kilometer or mile display. Reset the device settings to the factory default state.
System version
Display the version of the device firmware.
Monitor display timer Language Select units
Format SD card
Delete all files and format the SD card. (ÁP.13)
Update system
Update the device firmware. (ÁP.23)
21
Various Settings Setting the Date and Time Set the date and time of the device.
1. Press the [MENU/OK] button. MENU appears.
Automatic
Set the date and time automatically using the time received from a GPS satellite.
Manual
Set the date and time manually.
5. Set the timezone setting or date/time setting. Use the [J]/[K] buttons to select the time zone or date and time and then press the [MENU/OK] button.
2. Use the [J]/[K] buttons to select
and then press the [MENU/OK] button.
When automatic was selected, the timezone settings is displayed.
1 1
2
2
1 1
3. Use the [J]/[K] buttons to select
When manual was selected, the date/setting is displayed. Repeat the same operation to set the date and time.
and then press the [MENU/OK] button. 1
1 2 1
2 1
4. Use the [J]/[K] buttons to select an
6. Press the [
the procedure.
] button to end
item and then press the [MENU/OK] button. 1 2 1
22
• The device sets the date and time automatically using the coordinated universal time (UTC) received from a GPS satellite. • If the date and time are set automatically, setting the correct time may not be possible until a GPS satellite signal can be received normally.
Updating the System Update the system firmware of the device. For information regarding updates, visit the JVC KENWOOD website at http://www.kenwood.com/cs/ce/.
5. Press the [MENU/OK] button to end the procedure.
1. Copy the system update file to the SD card and then insert the SD card into the SD card slot.
2. Press the [MENU/OK] button. MENU appears.
• Do not turn off the power of the device, start the engine of the vehicle, or remove the SD card during the update. • When the firmware update is finished, the device restarts.
3. Use the [J]/[K] buttons to select
and then press the [MENU/OK] button. 1 2 1
4. Use the [J]/[K] buttons to select
and then press the [MENU/OK] button. 1 2 1
The firmware is updated.
23
Using the PC Application KENWOOD DRIVE REVIEWER is a PC application for displaying video recorded with the device. The application can be downloaded from the JVC KENWOOD website at http://www.kenwood.com/cs/ce/.
Installing the Software
1. Double-click of the
application software downloaded to the PC and following the on-screen instructions to install KENWOOD DRIVE REVIEWER.
Playing Files
1. Remove the SD card from the device,
insert it in the supplied SD card adapter, and then connect it to the PC using a card reader (commercially available).
2. Start KENWOOD DRIVE REVIEWER. 3. Select the drive for the SD card with
