Drytek® Product Selection Catalog

Transcript

DRYTEK Product Selection Catalog ® Globally Proven Construction Solutions Snap for more information. CONTENTS CONTENTS Warranty Information .......................................................3 Brand LATICRETE .......................................................... 4 - 5 MOISTURE CONTROL / PRIMER DRYTEK™ Moisture Vapor Barrier ........................................6 DRYTEK Epoxy Primer .......................................................7 DRYTEK™ LEVELEX™ Primer................................................7 SELF-LEVELING UNDERLAYMENTS / FIBER-REINFORCED UNDERLAYMENTS / LIGHTWEIGHT DRYTEK® LEVELEX™ .........................................................8 DRYTEK LEVELEX Plus .......................................................8 DRYTEK LEVELEX FR .........................................................9 DRYTEK LEVELEX LW ........................................................9 SKIMCOAT UNDERLAYMENT / PATCH SOUND & CRACK CONTROL / REINFORCEMENT DRYTEK Skimcoat ...........................................................10 DRYTEK Patch.................................................................10 170 Sound & Crack Isolation Mat .....................................11 DRYTEK Decoupling Mat ...................................................11 DECORATIVE AND WEAR SURFACE TOPPING / DECORATIVE SEALER DRYTEK LEVELEX DL ........................................................12 DRYTEK Decorative Sealer ................................................12 SUPERCAP / PERMACOLOR SELECT / STONETECH SUPERCAP .....................................................................13 PERMACOLOR SELECT ......................................................14 STONETECH ...................................................................15 2 l www.dr ytek.com WARRANTIES LATICRETE OFFERS THE BEST SYSTEM WARRANTIES IN THE INDUSTRY Unmatched Peace of Mind LIFETIME* Warranty See Data Sheet 230.99 for complete warranty information. Underlayment DRYTEK® LEVELEX™ Plus DRYTEK™ LEVELEX Primer NXT™ Primer NXT Level Plus Floor Warming^ Floor Heat Mat (Mat Only) Floor Heat Wire (Wire Only) Waterproofing/ Anti-Fracture HYDRO BAN® HYDRO BAN Sheet Membrane 9235 Waterproofing Membrane Shower System HYDRO BAN Pre-Sloped Shower Pan (and applicable accessories) HYDRO BAN Linear Pre-Sloped Shower Pan (and applicable accessories) HYDRO BAN Linear Drain HYDRO BAN Bonding Flange Drain HYDRO BAN Drain Cover HYDRO BAN™ Board HYDRO BAN Board screws HYDRO BAN Board tab washers 4-XLTΔ See Data Sheet 025.0 for complete warranty information. APPLICATION PRODUCTS Underlayment DRYTEK® LEVELEX™ Plus DRYTEK LEVELEX FR DRYTEK™ LEVELEX Primer NXT™ Primer NXT Level Plus Floor Warming^ Floor Heat Mat (Mat Only) Floor Heat Wire (Wire Only) Vapor Reduction DRYTEK Moisture Vapor Barrier NXT Vapor Reduction Coating Waterproofing/Anti-Fracture HYDRO BAN® HYDRO BAN Sheet Membrane 9235 Waterproofing Membrane LATAPOXY® Waterproof Flashing Mortar Air & Water Barrier System MVIS™ Air & Water Barrier LATAPOXY® Waterproof Flashing Mortar MVIS Transition Tape MVIS Flexible Sealing Tape MVIS Transition Tape Primer Shower System HYDRO BAN Pre-Sloped Shower Pan (and applicable accessories) HYDRO BAN Linear Pre-Sloped Shower Pan (and applicable accessories) HYDRO BAN Linear Drain HYDRO BAN Bonding Flange Drain HYDRO BAN Drain Cover HYDRO BAN™ Board HYDRO BAN Board screws HYDRO BAN Board tab washer 4-XLTΔ Sound Control/Anti-Fracture 125 Sound & Crack Adhesive 170 Sound & Crack Isolation Mat Plaza & Deck Plaza and Deck System Uncoupling STRATA_MAT™ Thick Bed Method 3701 Fortified Mortar Bed MVIS Premium Mortar Bed LIFETIME SYSTEM WARRANTY PRODUCTS Warranty 25 YEAR SYSTEM WARRANTY LATICRETE takes pride in delivering comprehensive system warranty packages and superior service through industry-leading support. With training from our highly experienced technical support team and quick, easy access to supportive online tools, we provide everything you need to ensure high-performance solutions. APPLICATION 25 YEAR* Uncoupling STRATA_MAT™ Slurry Bond Coat 254 Platinum Thick Bed Mortar 3701 Fortified Mortar Bed Thin Bed / Adhesive Method Slurry Bond Coat 254 Platinum (regular or rapid version) 255 MULTIMAX™ 254 Platinum Thin Bed Method 254 Platinum (regular or rapid version) 255 MULTIMAX™ United States Invention Patent No. 6784229 (and other Patents) LATAPOXY 300 Adhesive Glass Tile Adhesive MVIS Hi-Bond Veneer Mortar (regular or rapid version) MVIS Veneer Mortar MVIS Thin Brick Mortar United States Patent No. 6784229 (and other Patents) LATAPOXY® 300 Adhesive Grout SPECTRALOCK® PRO Premium Grout Spot Bonding LATAPOXY 310 Stone Adhesive - Standard and Rapid Grade SPECTRALOCK PRO Grout Grouting / Pointing SPECTRALOCK® PRO Premium Grout (non-industrial applications) United States Invention Patent No. 6881768 (and other Patents) United States Invention Patent No. 6881768 (and other Patents) PERMACOLOR® Grout Sealant† United States Invention Patent No. 6881768 (and other Patents) SPECTRALOCK PRO Grout (non-industrial applications) United States Patent No. 6784229 (and other Patents) United States Invention Patent No. 6881768 (and other Patents) SPECTRALOCK 2000 IG PERMACOLOR® Grout LATASIL™ LATASIL 9118 Primer United States Patent No. 6784229 (and other Patents) MVIS Premium Pointing Mortar MVIS Pointing Mortar Sealant† * See Data Sheets 230.99 and 025.0 for complete warranty information. LATASIL™ MVIS Silicone Sealant LATASIL 9118 Primer † Use of suitable flexible sealant is required per Tile Council of North America Detail EJ171 for use in expansion joints, coves, corners, changes in plane, and other joints or wherever tile or stone abuts dissimilar materials or restraining surfaces. ‡ Available in the markets outside of the United States of America and Canada. ^ Floor Warming Thermostat sold by LATICRETE International, Inc., warrants parts and materials for one (1) year from the date of purchase. The sole remedy for the Floor Warming Thermostats is product replacement (see DS 230.13 for full details on the LATICRETE Product Warranty). Consult our website at www.drytek.com for the most current versions of product data sheets, warranties, and SDS. Content of this brochure is for informational purposes only. Refer to individual product data sheets and warranties for complete information. www.dr ytek.com l 3 YOUR SINGLE SOURCE FOR COMPLETE BUILDING SYSTEM SOLUTIONS For nearly 60 years, LATICRETE has led the industry with pioneering advancements—developing high-performance building materials for architects and construction professionals worldwide. From time-tested to ground-breaking, our broad product portfolio provides superior quality and value. We are fully committed to innovation, growth and a complete system component approach. Tile & Stone Installation and Care Systems Ensure a successful installation each and every time with the most comprehensive assortment of innovative tile and stone installation materials available worldwide. LATICRETE® industry-leading products provide complete system solutions from the substrate up through the grout for virtually any type of tile or stone installation in commercial, industrial and residential applications. Product categories include surface preparation, waterproofing, sound control, anti-fracture, adhesives, grouts, sealers and cleaners, and shower system components — all designed to work together, providing a comprehensive installation. CSI Divisions 9 & 22 Masonry Installation and Care Systems Keep up with the increasing popularity of adhered masonry veneers. Trust your installations to a complete productivity-boosting system designed to deliver superior, long-term performance on masonry projects of all types including residential, commercial, and industrial applications. Unlike traditional methods and materials, the Masonry Veneer Installation System (MVIS™) is engineered to provide a permanent, high-strength installation that uses a revolutionary waterproofing membrane to protect against weather and water intrusion, and provide freeze/ thaw stability. The MVIS is designed for thin-brick, manufactured stone and natural stone veneers for interior and exterior applications. Complimentary products include paver sand, and sealers and cleaners for stone and pavers. CSI Division 4 Concrete Restoration and Care Systems A quality finished floor starts with a properly prepared surface–one that guarantees a long-lasting, durable installation. LATICRETE time-tested surface preparation products are formulated to preserve quality by protecting installations from water vapor transmission, sound transmission and cracks. They provide a perfectly level and flat substrate to accommodate a variety of floor finishes including vinyl, wood, carpet and tile. Our innovative products are engineered to ensure substrates will easily accept finishes with minimal time and maximum cost-effectiveness, no matter how challenging your subflooring project may be. CSI Divisions 3 & 9 4 l www.dr ytek.com YOUR SINGLE SOURCE FOR COMPLETE BUILDING SYSTEM SOLUTIONS Decorative Finishes Offer unparalleled integral colors, textures, and finishes with high-performance coatings, overlayments, and restoration solutions that give owners exceptionally attractive, durable, decorative floors. LATICRETE decorative finishes allow you to deliver vivid color and gloss with high impact and wear resistance, quick turnaround, and low maintenance. CSI Divisions 3 & 9 Concrete Construction Chemicals Improve the long-term durability, performance and appearance of concrete surfaces with our complete line of protection and repair solutions. Curing and sealing treatments, floor hardeners and densifiers, polished concrete systems and stain protection products work together to ensure your concrete floor is safe, resilient, and easy to maintain. CSI Division 3 LATICRETE SUPERCAP System ® ® The LATICRETE® SUPERCAP® System is a time-saving, cost-effective method for finishing new concrete or capping existing slabs by combining a LEED-contributing, UL GREENGUARD Gold Certified, low-alkali, self-leveling, cement-based technology with a computer-controlled mobile blending unit (pump truck). This proven lean tool provides benefits right from the start of concrete placement in division 3 and flows through to division 9. With the ability to blend 30,000 pounds per hour and deliver material up to 50 stories high, this revolutionary system benefits the entire project by providing predictable results that save time, money, and improve overall quality. CSI Division 3 Industry-Leading Training and Support UL GREENGUARD Gold Certification LATICRETE® low-VOC products are independently certified. Our products help you contribute toward LEED certification. LEED Support Our online project certification tool automatically generates required LATICRETE product information for your specific LEED project submittals. Additional LEED information and calculations are available at laticrete.ecoscorecard.com. LATICRETE Architectural Guidebook Use this informative online tool to get complete details for project specs and design. You can access it at: www.laticrete.com/ag Training and Education LATICRETE will hold continuing education seminars right from your office. You can also attend product and installation technology seminars at one of our training centers or a location of your choice. www.dr ytek.com l 5 MOISTURE CONTROL DRYTEK™ MOISTURE VAPOR BARRIER Refer to Data Sheet 056.0 4151-0006-2 PART A + PART B Full Unit Kit 4151-0003-2 PART A + PART B Mini Unit Kit MOISTURE VAPOR BARRIER Moisture Vapor Barrier is a single-coat, 100% solids, liquid applied 2-part epoxy coating specifically designed for controlling the moisture vapor emission rate from new or existing concrete slabs prior to installing DRYTEK® underlayments. Vinyl, rubber, VCT, carpet, wood, ceramic tile, stone, moisture sensitive floor coverings, floor adhesives, epoxies and most resinous coatings. Moisture Vapor Barrier kit comes complete with the items listed below. FEATURES/BENEFITS: ■ Exceeds ASTM F3010 Standard ■ Can be applied over new concrete in as little as 5 days ■ Fast cure – ability to apply finish floor goods, DRYTEK® underlayments, and most resinous coatings in as soon as 12 hours PACKAGING: Full Unit Kit*: 6.5 gallon (24.6 l ) Mini Unit Kit*: 2.4 gallon (9.1 l ) ■ ■ ■ Part A – 2.2 gallon (8.3 l ) packaged in a steel pail Part B – 4.3 gallon (16.3 l ) packaged in a steel pail APPROXIMATE COVERAGE: DRYTEK™ Moisture Vapor Barrier is to be applied at minimum thickness of 12 mils. DRYTEK Moisture Vapor Barrier when applied at a minimum 12 mils thickness will control moisture vapor emission rate up to 25 lbs/1,000 ft2/24 hr (1415 µg/(s • m))^ per ASTM F1869 and maximum^ RH conditions per ASTM F2170. In order to help ensure coverage, periodically check mil thickness using a DRYTEK Moisture Vapor Barrier Wet Film Thickness Gauge. ■ Part A – 0.8 gallon (2.3 l ) packaged in a steel pail Part B – 1.6 gallon (6.1 l ) packaged in a steel pail *DRYTEK™ Moisture Vapor Barrier is a kit of two pails. Individual pails (Part A or Part B) cannot be purchased separately, and cannot be returned separately. Moisture Vapor Emission Rate (MVER) per ASTM F1869 and RH per ASTM F2170 MVER ≤25 lbs (1415 µg /s • m2)/ 100% MIL THICKNESS 12 FT2/GAL (M2/L) 133 (3.2) Each full unit will yield approximately 865 ft2 (80.8 m2)** Each mini unit will yield approximately 319 ft2 (29.8 m2)** ** Coverage is approximate and will vary depending on Concrete Surface Profile, mil thickness, absorption, and other field conditions. ^ No visible water or condensation on the surface. 6 l www.dr ytek.com 10 YEAR* Warranty PRIMERS DRYTEK EPOXY PRIMER DRYTEK LEVELEX™ PRIMER Refer to Data Sheet 077.0 4168-0302-2 / 4168-0010-2 Refer to Data Sheet 076.0 4171-0005-2 / 4171-0401-2 4171-0245-2 UNDERLAYMENT EPOXY PRIMER A two-component, high-solids epoxy primer applied with a sand broadcast for use with DRYTEK decorative wear surfaces. FEATURES/BENEFITS: UNDERLAYMENT PRIMER Premium quality, concentrated primer for use in preparing substrates to receive DRYTEK® LEVELEX™ underlayments. Penetrates deeply into substrates and maximizes bond strength. FEATURES/BENEFITS: ■ Ultimate bond for decorative wear surfaces ■ Concentrated acrylic primer for floors ■ Easily roller applied ■ Broom, roller, or spray applied ■ For use on a wide range of substrates ■ Provides a barrier between decorative wear surfaces and substrate below PACKAGING: 2 gallon (7.6 l ) kit 10 gallon (38 l ) kit APPROXIMATE COVERAGE: Yield/coverage may vary slightly depending on the amount of water, mixing equipment, temperature, and field conditions. Use with: DRYTEK® LEVELEX™, DRYTEK LEVELEX Plus, DRYTEK LEVELEX FR, DRYTEK LEVELEX DL, DRYTEK LEVELEX LW. DRYTEK™ LEVELEX Primer is to be used with all DRYTEK LEVELEX products. PACKAGING: 1 gallon (3.8 l ) jug, 4 jugs per carton; 36 cartons per pallet 5 gallon (18.9 l ) plastic pail; 28 pails per pallet 245 gallon (927.4 l ) heavy-duty intermediate bulk container (IBC) APPROXIMATE COVERAGE: Yield/coverage may vary slightly depending on the amount of water, mixing equipment, temperature, and field conditions. DRYTEK™ LEVELEX™ Primer DILUTION 2 gallon (7.6 l ) Kit: 180 – 266 ft2 (16.7 – 24.7 m2) at 12 – 18 mils (0.3 – 0.5 mm) 10 gallon (38 l ) Kit: 900 - 1330 ft2 (83.6 – 123.6 m2) at 12 – 18 mils (0.3 – 0.5 mm) SUITABLE SUBSTRATES PRIMER TO WATER RATIO1 APPROXIMATE COVERAGE2 1:3 400 ft² (37 m²) 1st coat: 1:5 2nd coat: 1:3 5:1 200 ft² (19 m²) 200 ft² (19 m²) Non-Suction: Ceramic, Stone, Quarry Tile/ VCT, VAT, Sheet Vinyl/Cement Terrazzo 1:1 with slurry 285 ft² (26 m²) DRYTEK Moisture Vapor Barrier 1:1 with slurry 285 ft² (26 m²) 1:3 400 ft² (37 m²) Normal Suction: Concrete High-Suction: Highly Porous Dry Concrete/All DRYTEK Underlayments/Cement Mortar Beds Exterior Glue Plywood DRYTEK™ Decoupling Mat 1. Dilution Ratio = Primer: Water 2. Approximate coverage in square feet per gallon of concentrated primer 3 YEAR* 25 YEAR* Warranty Warranty www.dr ytek.com l 7 SELF-LEVELING UNDERLAYMENTS DRYTEK® LEVELEX™ DRYTEK LEVELEX PLUS Refer to Data Sheet 076.1 Refer to Data Sheet 077.1 4118-0055-21 / 4118-2200-21 4111-0050-21 / 4111-2200-21 PREMIUM SELF-LEVELING UNDERLAYMENT SELF-LEVELING UNDERLAYMENT A cement based, easy-to-use, self-leveling underlayment designed for use over various substrates providing a fresh surface over which sensitive finished flooring goods can be applied without additional preparation. Can be placed from 1/8"– 3" (3 – 76 mm) in a single lift. A high quality, self-leveling, cement-based underlayment designed for use over various substrates. Formulation provides a highly smooth surface over which sensitive finished floor goods can be installed. Can be placed from 1/8"– 1– 1/4" (3 – 32 mm) in a single lift (consult LATICRETE Technical Services for pea gravel extension installation guidelines). FEATURES/BENEFITS: FEATURES/BENEFITS: ■ Deep pour formula ■ Low alkali ■ Pourable and pumpable ■ ■ High strength formula ■ Exceptional flow characteristics PACKAGING: PACKAGING: 55 lb (25 kg) bag; 40 bags per pallet 50 lb (22.7 kg) bag; 48 bags per pallet APPROXIMATE COVERAGE: 8 l www.dr ytek.com Install moisture-sensitive finish flooring in as little as 16 hours APPROXIMATE COVERAGE: Yield/coverage may vary slightly depending on the amount of water, mixing equipment, temperature, and field conditions. Yield/coverage may vary slightly depending on the amount of water, mixing equipment, temperature, and field conditions. Nominal Thickness Nominal Thickness 1/4" (6 mm) 22.3 ft (2.1 m ) 1/4" (6 mm) 24 ft2 (2.3 m2) 1/2" (13 mm) 11.2 ft2 (1.0 m2) 1/2" (13 mm) 12 ft2 (1.1 m2) 2 2 10 YEAR* 25 YEAR* Warranty Warranty FIBER-REINFORCED UNDERLAYMENTS/LIGHTWEIGHT DRYTEK LEVELEX FR DRYTEK LEVELEX LW Refer to Data Sheet 075.1 4130-0055-21 Refer to Data Sheet 074.1 4112-0034-21 FIBER-REINFORCED SELF-LEVELING UNDERLAYMENT LIGHTWEIGHT SELF-LEVELING UNDERLAYMENT DRYTEK® LEVELEX™ FR (fiber reinforced), a premium quality, cement based, self-leveling underlayment designed for interior applications. It is formulated for use over a wide range of substrates including concrete, VCT, exterior glue plywood, and tile. Can be placed from 1/8"- 2" (3 - 51 mm) in a single lift and is ideal for radiant heat floors. A lightweight, revolutionary, fast-setting, deep-fill underlayment made from a proprietary blend of Portland cement and specialized aggregate. DRYTEK LEVELEX LW is easy to mix and can be placed from 3/4"– 6" (19 – 152 mm) in a single lift and capped with a minimum of 1/2" (13 mm) DRYTEK LEVELEX self-leveling underlayment or topping. FEATURES/BENEFITS: FEATURES/BENEFITS: ■ High strength, fiber reinforced formula ■ Ultra lightweight ■ Fast drying ■ Achieve deep fill without compromising load constraints ■ Recommended for radiant heating systems ■ Pourable and pumpable PACKAGING: PACKAGING: 37 lb (16.8 kg) bag; 21 bags per pallet 55 lb (25 kg) bag; 40 bags per pallet APPROXIMATE COVERAGE: APPROXIMATE COVERAGE: Yield/coverage may vary slightly depending on the amount of water, mixing equipment, temperature, and field conditions. After mixing with water and curing, the bulk density is 28 lbs (350 kg) per cubic ft (per cubic meter). Nominal Thickness Nominal Thickness 1/4" (6 mm) 24 ft (2.3 m ) 3/4" (19 mm) 26 ft2 (2.4 m2) 1/2" (13 mm) 12 ft2 (1.1 m2) 1" (25 mm) 17 ft2 (1.6 m2) 2" (51 mm) 9 ft2 (0.8 m2) 3" (76 mm) 6 ft2 (0.6 m2) 6" (152 mm) 3 ft2 (0.3 m2) 2 2 25 YEAR* 3 YEAR* Warranty Warranty www.dr ytek.com l 9 SKIMCOAT UNDERLAYMENT/PATCH DRYTEK® SKIMCOAT DRYTEK PATCH Refer to Data Sheet 075.0 4190-0410-21 Refer to Data Sheet 074.0 4135-0025-21 SKIMCOAT UNDERLAYMENT PATCH UNDERLAYMENT A premium quality, fast-drying, cement-based underlayment designed for skim-coating, smoothing, and leveling prior to the installation of floor coverings. Apply from feather-edge to 1" (25 mm). Install finished flooring as soon as 20 minutes after application. This trowel-applied product has a superior creamy consistency making it the ideal choice for skim coat applications. Premium quality, fast-drying underlayment patch designed for use over most substrates. Cement-based formula is excellent for deep fills from 1/8" – 1–1/2" (3 – 38 mm). FEATURES/BENEFITS: FEATURES/BENEFITS: ■ Apply floor goods in as soon as 20 minutes ■ Interior and exterior ■ Trowel apply skim coat to 1" (0 – 25 mm) ■ Excellent bond strength ■ Excellent bond strength ■ Fast drying PACKAGING: 10 lb (4.5 kg) paper bag; 4 units per carton; 52 cartons per pallet APPROXIMATE COVERAGE: 25 lb (11.3 kg) bag; 64 bags per pallet APPROXIMATE COVERAGE: Yield/coverage may vary slightly depending on the amount of water, mixing equipment, temperature, and field conditions. Yield/coverage may vary slightly depending on the amount of water, mixing equipment, temperature, and field conditions. Nominal Thickness Nominal Thickness Up to 250 ft2 (23.0 m2) at feather-edge thickness. 3 YEAR* Warranty 10 l www.dr ytek.com PACKAGING: 1/8" (3 mm) 32.5 ft2 (3.0 m2) 1/4" (6 mm) 16.3 ft2 (1.5 m2) 1/2" (13 mm) 8.1 ft2 (0.8 mm2) 1" (25 mm) 4.1 ft2 (0.4 mm2) 1-1/2" (38 mm) 2.7 ft2 (0.3 m2) SOUND & CRACK CONTROL/REINFORCEMENT 170 SOUND & CRACK ISOLATION MAT DRYTEK™ DECOUPLING MAT Refer to Data Sheet 170.0 0170-0150-2 Refer to Data Sheet 079.0 4172-0325-2 UNDERLAYMENT MEMBRANE MESH-REINFORCEMENT UNDERLAYMENT A high performance 1/8" (3 mm) thick underlayment membrane that provides exceptional sound reduction while simultaneously providing anti-fracture protection for the DRYTEK® Reinforcement Mat System. Ideal for schools, hotels, condominiums, and other applications requiring sound control, 170 Sound & Crack Isolation Mat is specifically designed to be used in conjunction with the DRYTEK Reinforcement Mat System. Mesh reinforcement bonded to a sheet comprised of polymeric fibers. Acting as both decoupling and reinforcement, Decoupling Mat is part of the DRYTEK Reinforcement Mat System when encapsulated in a DRYTEK Self-Leveling Underlayment. FEATURES/BENEFITS: FEATURES/BENEFITS: ■ High strength formula ■ Decouples surface system from movement in the substrate ■ Fast drying ■ Lightweight roll replaces metal reinforcement lath ■ Exceptional flow characteristics ■ Easy to handle and install PACKAGING: 4' x 37.5 ft2 (150 ft2), (1.2 m x 11.3 m) (13.7 m2) roll; 1 each or 20 rolls per pallet APPROXIMATE COVERAGE: Per roll 150 ft2 (13.7 m2) PACKAGING: 488 ft2 (45.3 m2), 8 rolls per pallet, 59 lbs (26.8 kg) per roll APPROXIMATE COVERAGE: 488 ft2 (45.3 m2) per 39" X 150' (990 mm x 45.7 m) roll 25 YEAR* Warranty www.dr ytek.com l 11 DECORATIVECONTROL MOISTURE AND WEAR SURFACE TOPPING/ DECORATIVE SEALER DRYTEK® LEVELEX™ DL DRYTEK DECORATIVE SEALER Refer to Data Sheet 078.1 4120-0055-21 / 4121-0055-22 Refer to Data Sheet 078.0 4169-0005-2 PREMIUM WEAR SURFACE AND SELF-LEVELING UNDERLAYMENT DECORATIVE SEALER A cement-based, high quality, fast drying dual purpose self-leveling underlayment/interior decorative wear surface topping. For application over a wide variety of substrates including concrete, VCT, and tile. Can be placed from 1/16" to 1-1/4" (1.5 – 32 mm) in a single lift. A clear, water-based, catalyzed aliphatic urethane emulsion sealer. Exhibits excellent abrasion resistance without the solvent odors associated with other urethane products. FEATURES/BENEFITS: FEATURES/BENEFITS: ■ Can be used as a high performance underlayment or an attractive, decorative wear surface ■ Can be topically stained or integrally colored ■ Fast drying ■ ■ ■ PACKAGING: 55 lb (25 kg) bag; 40 bags per pallet APPROXIMATE COVERAGE: Yield/coverage may vary slightly depending on the amount of water, mixing equipment, temperature, and field conditions. Formulated for use over DRYTEK® wear surfaces and decorative toppings For use in demanding environments such as high foot traffic areas, industrial spaces Fast set time and a long pot life PACKAGING: Two-component kit containing: 5 gallon (18.9 l ) Part A and 1.8 oz (53.2 ml) Part B APPROXIMATE COVERAGE: 400 – 535 ft2 per gallon (37 – 49.5 m2) at 3 – 4 mils (0.08 – 0.1 mm) wet thickness 5 gallon (18.9 l ) kit: 2000 – 2,675 ft2 (185 – 248 m2) at 3 – 4 mils (0.08 – 0.1 mm) Nominal Thickness 12 l www.dr ytek.com 1/4" (6 mm) 26 ft2 (2.4 m2) 1/2" (13 mm) 13 ft2 (1.2 m2) 3 YEAR* 3 YEAR* Warranty Warranty STONETECH - TILE AND STONE CARE SYSTEMS The LATICRETE® SUPERCAP® System combines our industry leading patented pump truck technology and innovative products to deliver perfectly flat, dry floors. Time Tested. World Proven - For over a decade we have delivered spectacular time-saving, cost-effective solutions that correct uneven concrete, reduce moisture vapor emissions and shorten build times. This system benefits the entire project from design to completion, all backed by the industry leader in globally proven construction solutions. Underlayments/Overlayments Quick drying – walkable in 2-4 hours, trades can work the next day High compressive strengths ■ 4,000 and 5,000 + PSI formulas ■ Lightweight formula option ■ Low shrinkage, dimensionally stable ■ Low alkali formula creates alkalinity buffer ■ Inorganic formula will not contribute to mold/mildew ■ UL GREENGUARD Gold certified ■ ■ Moisture Vapor Control 100% solids epoxy Single coat application ■ Exceeds ASTM F3010 ■ UL GREENGUARD Gold certified ■ ■ Patented Pump Truck Technology ■ ■ Computer controlled mobile blending unit Dual-silo design enables on-site product blending Blending is done at street level, no unmixed material enters the building. No Silica dust. ■ Industry leading volume, blend up to 30,000 lbs per hour ■ Pump material up to 50 stories above ground ■ On-board electric generator ■ Long arm articulating crane ■ Water supply system ■ The LATICRETE SUPERCAP System ® ® The superior choice for new construction or renovations Eliminates the need for power trowel finishing and curing compounds ■ Can be applied over new concrete as early as 7 days with RH levels up to 100% as per ASTM F2170 ■ Guaranteed to meet substrate tolerances for all types of floor coverings ■ Reduces MVER** to protect sensitive floor coverings ■ Reduces build times and carrying costs ■ Contributes towards USGBC LEED points ■ Industry leading warranties ■ Single source solution ■ ■ www.dr ytek.com l 13 PERMACOLOR SELECT GROUT PERMACOLOR SELECT ® The Grout Game Has Changed! Industry Leading Performance PERMACOLOR® Select is an advanced high performance cement grout that offers the industry’s first dispersable dry pigment solution. PERMACOLOR Select is designed for virtually all types of residential and commercial installations and offers optimum performance on the most demanding exterior or interior applications. Easy to mix, grout and clean, PERMACOLOR Select is fast setting and is suitable for joints 1.5 mm to 12 mm wide on floors or walls. Globally Proven Construction Solutions 14 l www.dr ytek.com PERMACOLOR SELECT GROUT STONETECH® SURFACE CARE PRODUCTS Natural Stone, Tile and Masonry Care Products STONETECH® Surface Care Products are reliable, high performing and, thoroughly tested giving today’s savvy stone professionals a competitive edge. Now you can Protect, Clean and Transform your natural stone, tile and masonry - and ensure the quality of your work for years to come. Clean UNTREATED UNTREATED TREATED TREATED Specially formulated to clean and maintain the beauty of natural stone, .tile, masonry and grout surfaces www.dr ytek.com l 15 Available in French / Disponible en français. Visiter www.laticrete.com/fr pour les informations complètes. Available in Spanish / Disponible en español. Visite www.laticrete.com/sp para la información completa. Middle East. LATICRETE MIDDLE EAST LLC. P.O. Box. 86028, Ras Al Khaimah - UAE. Tel. +971.7.244.6396, Fax. +971.7.244.5915 E-mail: [email protected] | www. laticrete.me Corporate Headquarters: LATICRETE International, Inc. One LATICRETE Park North Bethany, CT 06524-3423 USA 1.800.243.4788 +1.203.393.0010 www.laticrete.com Africa: +27.078.343.4029 South East Asia: +65.6515.3028 Mexico: +52.81.8348.5121 UK: +44.151.486.6101 Middle East: +971.7.244.6396 Latin America: +1.203.393.0010 India: +91.40.3041.3100 Europe: +44.871.284.5959 China: +86.21.5789.3300 Australia: +61.7.3865.1599 Asia Pacific: +852.2526.6660 ©2016 LATICRETE International, Inc. All trademarks shown are the intellectual properties of their respective owners. DS-007.6-1114