Transcript
DS-132STA Multi Function Flex Stand Step 1 - Adjust VESA Brackets to Desired Position 1. Using the provided 4mm allen wrench, loosen the positioning rings and VESA brackets and locate both at the desired height. Tighten in place. 2. Attached Monitor and Thin Client to the appropriate VESA bracket using the provided screws. Note: You may find it easier to remove the VESA brackets to install the Monitor/Thin Client and re-install.
Additional Instructions for Thin Client Mounting Thin Client Housing can be “Screw Style” or “Hang Style” please see the notes for the style which you have.
Screw Style - Thin Client has a VESA hole pattern identical to that of a monitor 1. Using the monitor screws attach the Thin Client or Thin Client Housing directly to the VESA Bracket.
Hang Style - Thin Client has key hole opening designed to hang on a screw or bolt Step 1 - Install Bolts and Nuts on the VESA Bracket. 1. Locate the VESA holes on the bracket. Choose between the 100mm or 75mm hole alignment. You must use all four of the same alignment. 2. Insert Bolts and Nuts into VESA holes on the VESA Bracket as shown. Repeat for all 4 holes.
Monitor Bracket
Positioning Ring
Thin Client Bracket
Step 2 - Mount Thin Client Enclosure. 1. Align the mounting holes on the back of the enclosure to the 4 bolts on the VESA Bracket and hand the Enclosure. Tighten in place. 2. Install the Thin Client into the Enclosure
Monitor
Package Contents:
Thin Client
• Flex Monitor Stand, (2) VESA Brackets with Positioning Rings, (8) Monitor Screws, (4) Bolts, (8) Nuts, (2) Velcro Straps for Cable Management, QIG For Questions about your DoubleSight Flex Monitor Stand please contact DoubleSight Customer Support at 888.897.8869 or
[email protected]. For questions regarding your Thin client please contact the appropriate manufacturer. www.doublesight.com
Dual Stands
Triple Stands
Quad Stands
Grommet Base for Flex Stand
DS-GRMT
Toll Free: 1.877.TWO.LCDS(896-5237)
Email:
[email protected]
Desk Clamp for Flex Stand, Vise Style
3
Triple Monitor Tier Extension - adds (3) monitors, up to 19” capacity
DS-23T
Desk Clamp for Flex Stand, Base Style
2
Dual Monitor Tier Extension - adds (2) monitors, up to 24” capacity
DS-22T
DS-CLMP2
4
Quad Monitor Flex Stand, accommodates up to (4) 30” Monitors, (2x2)
DS-430STA
DS-CLMP1
4
Quad Monitor Flex Stand, accommodates up to (4) 24” Monitors, (2x2)
DS-424STA
20 lbs
20 lbs
20 lbs
20 lbs
20 lbs
20 lbs
20 lbs
20 lbs
20 lbs
26 lbs
26 lbs
Lb/Monitor
8.5”
8.5”
10.5”/12”
8.5”/12”
10.5”
8.5”
10.5”
8.5”
10.5”
n/a
14”
Minimum Height
11.75”
11.75”
13.75”/15”
11.75”/15”
13.5”
11.75”
13.75”
11.75”
13.75”
18”
17.25”
Maximum Height
38”
30”
34”
30”
58”
38”
34”
30”
20.5”
n/a
n/a
Overall Width
Physical Specifications
n/a
n/a
17.5” x 9”
17.5” x 9”
17.75” x 9.25”
17.5” x 9”
17.5” x 9”
17.5” x 9”
14” x 9.5”
17.5” x 9”
14” x 9.5”
Base Dimensions WxD
DS-VSBracket
DS-VS200
DS-EXT3
Multi Monitor Flex Stand Accessories
www.doublesight.com
Add On VESA Bracket accomodates Thin Clients
200mm x 100mm VESA Conversion Bracket
3” Height Extension for Flex Stand
Note: Monitor Capacity is per Monitor; Height and Width is measured from center of VESA Bracket
19”
24”
30”
24”
30”
3
Triple Monitor Flex Stand, accommodates up to (3) 30” Monitors
DS-330STA
22”
3
Triple Monitor Flex Stand, accommodates up to (3) 22” Monitors
DS-322STA
30”
2
Dual Monitor Flex Stand, accommodates up to (2) 30” Monitors
DS-230STA
24”
2
Dual Monitor Flex Stand, accommodates up to (2) 24” Monitors
19”
DS-224STA
30”
Dual Monitor Flex Stand, accommodates up to (2) 19” Monitors
30”
Dimension
2
Single Monitor Flex Stand, accommodates up to 30” Monitor + Thin Client
DS-132STA
DS-219STB
1
Qty
Monitor Capacity
1
Single Monitor Flex Stand, accommodates up to 30” Monitor
Production Description
DS-130STA
Model
Multi Monitor Flex Arms
S ec ure , E rgono m i c Mou n t ing S olu t ion s f or a Cu s t om View on any Des k T op
Single Stands
DoubleSight Displays Multi Monitor Flex Stands
