Transcript
▼
Accessories BEARING BOX
SPECIFICA TION SPECIFICATION
▼
Part. No. Shaft size Shaft load max Radial Axial Speed max Bearing life at max load Protection class Material Shaft Housing Encoder shaft size Encoder types
MOUNTING KIT FOR BEARING BOX
01209010 Ø15mm g7
01209029 Ø10mm g7
250 N 150 N 4000 rpm 50 000 h IP 65 according to IEC 529 Stainless steel Aluminum, anodized Ø6mm Fits all shaft encoders with -51, -52 or -63 flange. For model 525 use adapter 01209033.
SPECIFICA TION SPECIFICATION Mounting kit Contains
For encoder with -51 flange with -63 flange with -52 flange
Shaft coupling, 464 19, 6-6mm Suitable O-ring 3 Mounting clamps with screws Part. No. 00203001 Part. No. 00203002 Part. No. 00203003
www.leinelinde.com
▼
Accessories SPECIFICA TION SPECIFICATION
MOUNTING CLAMPS
Part. No. (1 unit) For encoder type
Material Recommended screw
▼
(3 x) 00203004
(3 x) 00203005
SPECIFICA TION SPECIFICATION
MEASURING WHEEL
00208002
00203004 00203005 All encoders with All encoders with -51, -52 flange synchro -63 flange Aluminium, anodized M3x16 M3x12
Circumference Part. No. Burled surface Polyurethane surface Encoder shaft size
500 mm
200 mm
00208014 00208002 Ø10 mm
00208015 00208010
Circumference Part. No. Burled surface Encoder shaft size
200 mm 00208028 Ø4 mm
00208015
www.leinelinde.com
▼
Accessories SPECIFICA TION SPECIFICATION
TORQUE ARM
Part. No. 01208013 01208014 Fastening screw M5 M6 Length Min 70mm, Max 1000mm Measurements A / B [mm] Ø5,0 / 8,0 Ø6,0 / 9,0 Part. No. Fastening screw Length Encoder types
Only 567/569 01209032 M4 - M6 42 mm Fits to all encoders with -56 or -57 flange
01208013 / 01208014
01209032
Part no. 01208013 / 01208014
▼
Part no. 01209032
ADAPTER FLANGE
SPECIFICA TION SPECIFICATION Part. No. For Encoder type Material
00208003 510-, 512-, 530-, 520-, 525-, 570Aluminium, anodized
00208003
www.leinelinde.com
▼
Accessories MOUNTING BRACKET
SPECIFICA TION SPECIFICATION Part. No. For encoder type
00208001 00208011 All encoders with All encoders with -51 or -52 flange -61 or -63 flange
Material
Aluminium, anodized
00208011
Part no. 00208001
Part no. 00208011
www.leinelinde.com
▼
Accessories SPRINGLOADED BRACKET
SPECIFICA TION SPECIFICATION Part. No. For encoder type
01209110 All encoders with -61 flange
Material
Aluminium, anodized
01209110
Part no. 01209110
www.leinelinde.com
▼
Accessories SPECIFICA TION SPECIFICATION
INSULA TED HOLLOW SHAFT ADAPTER INSULATED
Part. No. 01209140 Adaptor inner diameter (øi) ø10mm G7
01209141 ø12mm G7
▼
Adaptor outer diameter (øo)ø12mm ø14mm Material PEEK Load max Radial 20N Axial 10N Speed max 6000rpm Temperature Operating -40ºC … +100ºC Storage -40ºC … +100ºC Electrical insulation < 500VAC Encoder shaft size ø12mm ø14mm Encoder type Fits all hollow shaft encoders in the 500-series with shafts according to the specifications above
SPECIFICA TION SPECIFICATION
DRA W WIRE ENCODER DRAW
Part. No. Contact Leine & Linde Max measuring range 10000 mm Linearity < 0.02% FSO* Encoder revolution FSO 10 revolutions Wire acceleration 100m/s2 Wire retraction force (min) 3.5N Wire extension force (max)12N Temperature range -20ºC..+80ºC Material housing Aluminium draw wire Stainless steel Encoder types Fits all shaft encoders with synchro (63-) flange and 6mm shaft.
New model
Guide pulley Adjustable Fixed
Part. No. 00208038 00208039
* FSO, Full Scale Out
ISO 9001 / ISO 14001 certified Olivehällsvägen 8, SE-64542 Strängnäs, Sweden. Phone: +46 (0)152 26500. Fax: +46 (0)152 26505. E-mail:
[email protected]
05-01-28 PS. Specifications can be changed without prior notice.
www.leinelinde.com
