Transcript
T E C H N I C A L D ATA S H E E T 50 ohm Connectors for RF Cables Rev.: 03/2012-01-31
Connector
1/2” Hiflex for EC4-50-HF (5092)
FEATURES • Low reflection coefficient (up to 2.5 GHz) • Low PIM level • High contact force through inner contacts made in a high-strength copper alloy • Silver plated • Watertight (IP67/IP68) • Corrosion resistant • Quick trimming tool for cable preparation • On piece ”screw on and tighten it”
716MBL12X
NF50B12X
716MB12X
The connectors are designed according the standard interfaces as N or DIN 7/16. Contact components are silver plated to minimize insertion loss and passive intermodulation products; mechanical parts are nickel plated for heavy-duty handling and best corrosion resistance. The watertightness is made simultaneously on the outer conductor and on the jacket using a special silicone gasket. This watertightness solution allows the use of ours connectors in the toughest environmental conditions. For a cost effective, easy and reliable installation, special trimming tools are recommended.
SPECIFICATIONS Connector type
N-male
N-female
Electrical specifications • Nominal impedance [Ω] • Reflection coefficient @ 2.5 GHz • Insulation resistance [GΩ] • Test voltage (at sea level) [kV rms, 50Hz] • Working voltage (at sea level) [kV rms,50Hz] • Max. peak power [kW] • Screening effectiveness up to 1 GHz [dB] • Contact resistance (outer contact) [mΩ] • Contact resistance (inner contact) [mΩ] • PIM ratio (2 x 20 W carrier) [dBc] Mechanical specifications • Torque of coupling mechanism [Nm] • Tensile strength of coupling mechanism [N] • Cable retention [N] • Mechanical endurance (Nr of couplings) • Outer diameter [mm] • Length [mm] • Weight [g]
≤ 0.02
≥5 2.5 1 10
22 61 100
7-16 female
≥ 10 4 2.7 40 > 128 ≤1 ≤1 ≤ -155 (Typical -163) 30 1000 > 700 ≥ 500
22 59 100
N-male right angle
50
8 400 > 400 35 50 120
29 51 115
≥5 2.5 1 10
7-16 male right angle
≤ 0.03
≥ 10 4 2.7 40
8 400 > 400
30 1000 > 700
23 51 x 41 138
23 55 x 39.5 160
Environmental specifications • Temperature range • Degree of protection • Climatic & moisture resistance test • Corrosion resistance test • Vibration test
-40 °C to +85 °C (-40 °F to +185 °F) IP67/IP68 (mated connectors) acc. ANSI/SCTE 72 2002 R2007 (-40 °C / +60 °C @ 75% r.h.) for 2 weeks acc. IEC 60068-2-11-Test Ka acc. IEC 60068-2-6 (10 to 500 Hz @ 10 G)
Materials • Externals parts • Outer contact • Inner contact • Dielectric • Gaskets
Passivated silver plated or electroless nickel plated brass Passivated silver plated brass Passivated silver plated high-strength copper alloy and brass PTFE TPX TPX / PTFE High quality silicone
Cable dimensions [mm] • Inner conductor outer diameter • Outer conductor outer diameter • Jacket outer diameter
DS connector 1/2 Hiflex
7-16 male
Order codes • Connector type • Special trimming tool
3.5 to 3.6 12 to 12.4 13 to 13.8 NM50B12X
NF50B12X 716MB12X SPTC50B12X – Silver color
716FB12X
NM50BL12X 716MBL12X SPTC50BL12X-Black color
ISO Certified Company KABELWERK EUPEN AG - Malmedyer Straße 9 - 4700 EUPEN - BELGIUM
Tel.: +32(0) 87.59.70.00 - Fax : +32(0) 87.59.71.00 - http://www.eupen.com - e-mail:
[email protected]
