Transcript
IPM-708 ARINC-708 Display Bus IPACK Module
FEATURES ‣ ARINC 708 protocol support ‣ Two independent transmit and receive channels ‣ Up to 4 IPack Modules on a single carrier board provides up to 8 Tx and 8 Rx per carrier board ‣ Microsecond precise Tx and Rx timetags ‣ Internal loopback capability
OVERVIEW The IPM-708 provides two transmit and two receive ARINC 708 display bus channels. Available as a 32MHz single-size Industry Pack (IPack) module, the IPM-708 offers 32-bit transmit and receive time tagging with a precision of one microsecond. Flexible status and interrupt flags fully support both polling and interrupt-driven software strategies to ensure optimal real-time performance. The IPM-708 contains on-board coupling transformers. A highperformance FPGA is used to provide encode/decode, error injection and detection, fail-safe timer, and transceiver control functions. As an added convenience, the IPM-708 comes with 16 general-purpose DIO ports, which can be individually programmed as inputs or outputs, and optional ARINC 429 channels. 32-bit timetags allow precise detection of edge transitions.
SOFTWARE SUPPORT The MX-Foundation library provides high-level abstraction of hardware and allows to easily control mixed protocols and I/O modules on one or multiple carrier boards.
A v i o n i c s Te s t & M e a s u r e m e n t
‣ Error injection and detection (sync, bit rate, Manchester, and word length) ‣ 16 Discrete I/O lines ‣ 256 word Tx FIFO and 1024 word Rx FIFO ‣ IRIG-B input support ‣ Available in extended temperature
SOFTWARE ‣ MX-Foundation multi-protocol software API available for Windows, Linux and Mac OS X ‣ MAXIM Windows GUI
IPM-708 ARINC-708 Display Bus IPACK Module
SPECIFICATIONS Protocols supported
IPACK Module bus clock
• ARINC 708 Display Bus
• 32 MHz
Discrete Input/Output (DIO)
Physical dimensions
• 16 independently configurable to Input/Output mode
• IPack Standard Single Size • 3.9” x 1.8” (9.906 cm x 4.572 cm)
Channel speed
Environmental
• 1 Mbps
• Standard Operating Temperature: 0°C to 70°C • Relative Humidity for operation: 0 to 95% (non-condensing)
Time Synchronization • 32-bit Resolution: 1 microsecond, Accuracy: 1 microsecond • IRIG-B AM, Digital and 1-PPS inputs
Maximum power consumption and requirements • +5V, 230 mA IDLE / 630 mA Full load
Buffer size per channel
Additional features
• 256 word on transmission • 1024 word on reception
• Internal loopback supports busless operation • Complete independent channel configuration and operation • Transition detection on discrete Inputs (DIO) • Error injection and detection (sync, bit rate, Manchester, and word length)
Supported IndustryPACK Carrier Boards The IPM-708 is a standard IndustryPack (IPack) module that can be used with MAX Technologies’ PCI, CPCI and PXI intelligent carrier boards
Software MAXIM MX Foundation
MAXIM is a powerful and easy-to-use test & measurement GUI application for Windows XP MX-Foundation is a multi-protocol high-level API that takes full advantage of the MAX Technologies’ intelligent carrier boards. MX-Foundation is available for Windows, Linux and Mac OS X.
Ordering Information Part Number
Description
MAX-IP-200750
IPM-708, 1TX-1RX, 16 DISCRETE, ERR INJ, IRIG-B
MAX-IP-200751
IPM-708, 2TX-2RX, 16 DISCRETE, ERR INJ, IRIG-B
Corporate Headquarters
www.maxt.com
7005 Taschereau Boulevard, 3rd floor Brossard (Quebec) Canada J4Z 1A7 Toll Free: (N. America) +1-800-361-1629 Direct: +1-450-443-3332 • Fax: +1-450-443-1618
