Transcript
DS-VSBracket-LN1 VESA Bracket with Lenovo Tiny Enclosure Mounting Guide Step 1 - Install Bolts and Nuts on the VESA Bracket 1. Locate the VESA holes on the bracket. Choose between the 100mm or 75mm hole alignment. You must use all four of the same alignment. 2. Insert Bolts and Nuts into VESA holes on the VESA Bracket as shown. Repeat for all 4 holes.
Step 2 - Install VESA Bracket onto Pole of the Flex Stand 1. Using the 4mm Allen Wrench, loosen the screw holding the plastic post cap located at the top/center of the Flex Stand post and remove cap.
2. Install VESA Bracket into the opening of the center post.
3. Using the screw removed from the cap, tighten the VESA Bracket into place
Step 3 - Mount Enclosure for Tiny PC 1. Align the mounting holes on the back of the enclosure to the 4 bolts on the VESA Bracket and hang the Enclosure. Tighten in place. 2. Install the Tiny PC into the Enclosure
Package Contents: • VESA Bracket, (4) Bolts, (8) Nuts, 4mm Allen Wrench, (2) Velcro Straps for Cable Management, QIG For Questions about your DoubleSight Flex Monitor Stand or the installation of the additional VESA Bracket, please contact DoubleSight Customer Support at 888.897.8869 or
[email protected]. For questions regarding your Lenovo Tiny please contact Lenovo Support. www.doublesight.com
Dual Stands
Triple Stands
Quad Stands
Desk Clamp for Flex Stand, Vise Style
Grommet Base for Flex Stand
DS-CLMP2
DS-GRMT
Toll Free: 1.877.TWO.LCDS(896-5237)
Email:
[email protected]
Desk Clamp for Flex Stand, Base Style
3
Triple Monitor Tier Extension - adds (3) monitors, up to 19” capacity
DS-23T
DS-CLMP1
2
Dual Monitor Tier Extension - adds (2) monitors, up to 24” capacity
20 lbs
20 lbs
20 lbs
20 lbs
20 lbs
20 lbs
20 lbs
20 lbs
20 lbs
26 lbs
26 lbs
Lb/Monitor
8.5”
8.5”
10.5”/12”
8.5”/12”
10.5”
8.5”
10.5”
8.5”
10.5”
n/a
14”
Minimum Height
11.75”
11.75”
13.75”/15”
11.75”/15”
13.5”
11.75”
13.75”
11.75”
13.75”
18”
17.25”
Maximum Height
38”
30”
34”
30”
58”
38”
34”
30”
20.5”
n/a
n/a
Overall Width
Physical Specifications
n/a
n/a
17.5” x 9”
17.5” x 9”
17.75” x 9.25”
17.5” x 9”
17.5” x 9”
17.5” x 9”
14” x 9.5”
17.5” x 9”
14” x 9.5”
Base Dimensions WxD
DS-VSBracket
DS-VS200
DS-EXT3
www.doublesight.com
Add On VESA Bracket accomodates Thin Clients
200mm x 100mm VESA Conversion Bracket
3” Height Extension for Flex Stand
Note: Monitor Capacity is per Monitor; Height and Width is measured from center of VESA Bracket
19”
24”
30”
Multi Monitor Flex Stand Accessories
4
Quad Monitor Flex Stand, accommodates up to (4) 30” Monitors, (2x2)
DS-430STA
DS-22T
4
Quad Monitor Flex Stand, accommodates up to (4) 24” Monitors, (2x2)
DS-424STA
24”
30”
3
Triple Monitor Flex Stand, accommodates up to (3) 30” Monitors
DS-330STA
22”
3
Triple Monitor Flex Stand, accommodates up to (3) 22” Monitors
DS-322STA
30”
2
Dual Monitor Flex Stand, accommodates up to (2) 30” Monitors
DS-230STA
24”
2
Dual Monitor Flex Stand, accommodates up to (2) 24” Monitors
DS-224STA
19”
2
Dual Monitor Flex Stand, accommodates up to (2) 19” Monitors
DS-219STB
30”
Dimension
30”
Single Monitor Flex Stand, accommodates up to 30” Monitor + Thin Client
DS-132STA
1
Qty
Monitor Capacity
1
Single Monitor Flex Stand, accommodates up to 30” Monitor
Production Description
DS-130STA
Model
Multi Monitor Flex Arms
S ec ure , E rgono m i c Mou n t ing S olu t ion s f or a Cu s t om View on any Des k T op
Single Stands
DoubleSight Displays Multi Monitor Flex Stands