Transcript
The leader in rugged fiber optic RLH Industries, Inc.
technology.
DATA SHEET
! Lifetime Warranty DS-036 2015A-0120
DS3/T3 Fiber Link Card System The DS3/T3 Fiber Link Card converts standard T3 (44.736Mbps) or E3 (34.368Mbps) coax for transmission over fiber optic cable, and can be used by telco service providers and enterprise level users to connect to communication devices such as Utility, Wireless, PBX, Multiplexers, Routers and video servers via fiber optic cable. The DS3/T3 Fiber Link Card operates in pairs, extending distances over fiber and improving noise immunity and quality of service while improving intrusion protection, and providing high voltage communications protection and network security.
DS3/T3 Fiber Link Card
Key Features Environment Hardened to operate in -40°F to +158°F (-40°C to +70°C) Fiber Optics
Power local 24/48VDC power TX DS3/T3 Port
Application Available with ST or SC connectors for single or multi-mode fiber Full duplex, constant transmission Individual coax and fiber port enable/disable Local and remote loopback features Critical, high voltage, remote or un-manned locations operating 24/7/365
Compatibility
LED Indicator
B3ZS for T3 (DS3) and HDB3 for E3 codes Meets ANSI, ETSI and ITU specifications Framing independent - framed/unframed and channelized/unchannelized data
Power Terminals
CO/Sub Card
Quality Made in the USA Covered by our Unconditional Lifetime Warranty
RX DS3/T3 Port
Front Panel Features
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
Page 1
RLH Industries, Inc.
Ordering Information Part Number
Description
Distance
Fiber
Part Number
Multimode ST
DS3/T3 Card (CO/SUB)
5km / 3 mi.
62.5/50µm
8806-1501-01
Multimode SC
DS3/T3 Card (CO/SUB)
5km / 3 mi.
62.5/50µm
8805-1501-01
Single-mode ST
DS3/T3 Card (CO/SUB)
30km / 18.6 mi.
8-9µm
8806-1509-01
DS3/T3 Card (CO/SUB)
60km / 37 mi.
8-9µm
8806-1509-01-LH
Single-mode SC
DS3/T3 Card (CO/SUB)
30km / 18.6 mi.
8-9µm
8805-1509-01
DS3/T3 Card (CO/SUB)
60km / 37 mi.
8-9µm
8805-1509-01-LH
A complete system requires a CO and SUB card. Please contact your RLH sales representative for pricing and delivery information.
General Specifications Protocols
ANSI: T1.102, T1.107, T1.403, T1.404, T1-404a (T3), T1-408 ITU: G703 (E3), G704, G706, G751, G921, G926, O.151 ETSI: EN 300 689, 300 686, 300 687
Data Rates
T3: (44.736Mbps) E3: (34.368Mbps)
Copper Interface
RG-59 Coax 75 ohm, BNC
Copper Distance
T3: 1245 feet (380 m) E3: 1445 feet (440 m)
Transmission method
Amplitude Modulated Light via two optical fibers
Fiber Type
Multimode:
850nm
Single-mode:
1310nm
ST, SC or LC fiber female connectors
Maximum Fiber Distance
Multimode:
62.5/125µm, 50/125µm
Single-mode:
8-9/125µm
Multimode:
5km / 3 miles
Single-mode:
30km / 18 miles
Power Requirements
Local DC power source 24-56VDC@100mA
Power Wire Terminals
Screw clamp terminal block, 16 ~ 26 AWG
Operating Temperature
-40˚F to +140˚F (-40˚C to +60˚C)
Humidity
0~95% non-condensing
Dimensions
L7” x W4”x H1.24”, Standard Fiber Link Card form factor
Page 2
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
