Transcript
Datasheet: DK60 Development Board for IPC@CHIP® SC123 and SC143 Embedded Controller RoHS compliant (version H02)
Technical data IPC@CHIP® Embedded Controller
SC143-IEC-LF Embedded Controller
Ethernet interface
2 x 10/100BaseT, RJ45 connectors
Serial interface (asynchronous)
2x RS232 (COM, EXT), DSUB9 connectors 2x TTL (COM2, COM3), pin header
I²C interface
I²C pin header
SPI interface
SPI pin header
CAN interface
1 x CAN with CAN Transceiver , DSUB 9 connector 1 x CAN without CAN Transceiver, pin header
USB Interface
USB 1.1 Device / Host (prepared)
SD/MMC interface
SD/MMC Flash card interface for up to 2 GB cards
CF interface
Compact Flash card interface for up to 2 GB cards
I/O
8 way DIP Switch / 8 LED’s for general purpose input / output
Extension pin headers
extension pin headers with power supplys (8..30V power supply, 5V, 3,3V), 8 programmable chip selects (512 byte I/O space each) and free usable/programmable CPLD pin’s
Power-Fail detection
Under voltage detection at 16V
Supply voltage
24 VDC typical (8...30VDC)
Active current
110 mA (typical at 24VDC)
Operating temperature (TA)
0ºC to +55ºC
Size (BxLxH)
200mm x 157mm x 19mm
Weight:
185g
Design and handling guidelines Electrostatic Sensitive Device
Ordering information Order-No.:
DS_DK60_V4.PDF © Beck IPC GmbH Product: DK60
542751
Beck IPC GmbH Nauborner Straße 184 35578 Wetzlar/Germany
E-Mail:
[email protected] www.beck-ipc.com
