Transcript
DSP 4000 SERIES Digidrive introduced the new DSP4000 series with two or four channel amplifiers. The 4064 is the most powerful amplifier in the series. a 4 channel , high power amplifier 2 x 1200 watts and 2 x 800 watts.These series introduce Digidrive’s new class D state of the art technology.Developed for touring as well as permanent installations. DSP 4000 is your first choice when you need performance and reliability in every situation. The DSP 4000 series deliver continuously high output power while maintaining outstanding efficiency.Made in Europe & designed in the Netherlands, this lightweight amplifier features a 24 bit 96 kHz AD/DA converter and a DSP that features system filtering, up to 2 seconds of delay, EQ and crossover functions. Configuration, monitoring and controlling is as easy as never before! Specifications Signal To Noise-Ratio THD+N (typical) Frequency Response Damping Factor Protection Circuits
: : : : :
DSP
:
Power Input Input connectors Output connectors Operation Voltage Output Circuitry Dimensions
: : : : : :
>120 dB (A-weighted, 20 Hz - 20 kHz, 8 Ω load) < 0,05 % (20 Hz - 20 kHz, 8 Ω load, 3 dB below rated power) 20 Hz - 20 kHz ± 0,15 dB > 1000 (8 Ω load, 1 kHz and below) input limiter, short circuit protection, DC protection of output, under & over voltage protection, intelligent mains fuse protection, power stage overload protection, temperature protection of transformers and heat-sinks Full Crossover filtering with Bessel, Butterworth and Linkwitz-Riley, up top 10 parametric eq with bell shelf, notch, and all pass filter. delay up to 2 sec phase invert and limiting all at the same time Powercon 4* Xlr 1* Xlr AES/EBU USB 2 Speakon NL4 85-268V Class D (W x H x D) 483 x 88 x 455mm
: : : : :
16 Ω 800 W 160 Vp / 320 Vp 32 dB / 26 dB 11,0 kg/24,0 lbs
8Ω 1550 W
4Ω 2400 W
: : : : : : :
16 Ω 800 W 200 W 160 Vp / 320 Vp 80 Vp / 160 Vp 32 dB / 26 dB 12,0 kg/26, lbs
8Ω 1550 W 400 W
4Ω 2400 W 700 W
16 Ω 200 W 800 W 80 Vp / 160 Vp 26 dB 10,2 kg/22,0 lbs
8Ω 400 W 1400 W
4Ω 800 W 3200 W
DSP 4024 Load Power each channel Output Voltage Amplifier Gain Weight
DSP 4064 Load Power each channel 1&2 Power each channel 3&4 Output Voltage 1&2 Output Voltage 3&4 Amplifier Gain Weight
DSP 4032 Load : Power each 4 channels : Output power bridge mode : Output Voltage 1,2,3&4 : Amplifier Gain : Weight :
For more information: www.digidrive.com De Gouwe 10B 8253 PA Dronten
The Netherlands +31-341-252389
