Transcript
LAVATORY FAUCETS
547
Submitted Model No.: _____________________________________________ Specific Features: ________________________________________________
■ e-Flow™ Innovations® Mixing/Sensing Electronic Faucet ■ Battery Operated or Convertible to Hardwire Option ■ 3 Hole, 4" Centerset Sink Applications ■ Interchangeable Handle Options STANDARD SPECIFICATIONS: • ADA compliant, above deck temperature control with adjustable handle limit stop.
• Hands free on/off activation. • Self-adaptive sensor automatically calibrates to
2" (52 mm)
any sink.
• No external adjustments required to compensate
1" (26 mm) Max. Deck Thickness ✱
1 3/4" (45 mm)
for sink size, shape or surface reflectivity.
• Standard pop-up drain assembly included. • Powered by 4 “AA” batteries. • Expected battery life of approximately 1 year with normal usage.
• Low battery light will activate when 3 1/4" (83 mm)
approximately 3,000 cycles remain.
5" (127 mm)
• Operates with a 30 second maximum run time. 6 1/2" (165 mm)
1" (26 mm) Diameter
Will reset once obstruction is removed.
• All electronic elements are waterproofed and protected against humidity and steam.
• Serviceable filter screen upstream of valve. • Convertible to hardwire - use standard 13" (331 mm) Max. 4" (102 mm)
3 5/16" (85 mm)
1 5/8" (41 mm) to 2 3/8" (60 mm) 7" (178 mm) Max.
3 13/16" (97 mm)
2 1/8" (54 mm) Dia.
1 3/8" 3 3/8" (35 mm) Dia. (86 mm) 3 1/16" (78 mm)
transformer (120VAC to 24VAC) and Delta converter (24VAC to 6.4VDC) (RP32494). • Special Notes: Center of mounting hole should not exceed 2 1/8" (54 mm) from edge of sink. Self-rimming sinks may affect sensor performance and reduce set back depending on lip height. Set back can be increased 1/4" by using optional RP36202 spacer gasket. • If used in a commercial application, avoid placing additional IR (infrared) sensors from items such as hand dryers or flush valves within 4 feet of this product, or be sure to test the systems prior to permanent placement of such items to be certain no interference occurs.
4 5/8" (117 mm) 1 1/4" (32 mm) Dia.
UP
®
C ®
✱ Center mounting shank can be extended 1" using optional RP36203 extension nut and washer. With RP36202 Spacer Gasket (Not Included)
Less Spacer Gasket
Edge of Sink
COMPLIES WITH: • ASME A112.18.1/ CSA B125.1 • ASME A112.18.2/ CSA B125.2 Indicates ADA compliance to ICC/ANSI A117.1
Edge of Sink Pressure (kPa)
Any radius on sink edge will increase amount of setback. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book for finish options and product availability. DSP-L-547 Rev. B
69
138
207
276
345
414
483
552
621 22.7
5
18.9
4
15.1
3
11.4
2
7.6
1
3.8
Flow (Liters Per Minute)
2 1/8" (54 mm) Maximum Setback
1 1/4" (32 mm) 2 3/8" (60 mm) Maximum Setback
Flow (U.S. Gallons Per Minute)
0
3/4" (19 mm)
6
0
0 0
10
20
30
40
50
60
70
80
90
Pressure (PSI)
1.D.5
Available Handle Options
Three Hole Installation 4" (102 mm) Centerset Above Deck Temperature Control Adjustable Handle Limit Stop 5" (127 mm) Long Rigid Spout Metal Pop-Up Drain 3/8" O.D. Copper Supply Tubes Chrome Finish Brilliance ® Pearl Nickel Finish
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
RP34479BU - sPacific Blue RP34479GN - Astro Green RP34479OR - Orange Spice RP34479RD - Vreeland Red RP34479ZP - Zin Purple
547-NN
547
Standard Features
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
AC CONVERTER, HARD WIRE & PLUG-IN TRANSFORMER
RP32494–Hard Wire Converter Specifications General: Converts Delta 547 Series battery electronic faucets to hard wire Input Voltage: 24 VAC @ 60 Hz Output Voltage: 6.4 VDC ± 5% Current Draw: 600 MA Operating Temperature Range: – 55° C to 85° C Physical Connections: #22 AWG Stripped Primary Connection / 9 VDC Snap Secondary Connection Wire Size: #22 AWG Wire Length: 18.0" Wire Ends: PVC jacket removal should be 2.25" ± .50" and strip length of wires should be .375" typical
RP32856–Plug-In Transformer Specifications General: Supplies power for up to 10 Delta 547 Series electronic units already converted to hard wire Input Voltage: 120 VAC @ 60 Hz Output Voltage (unloaded): 24 VAC ± 5% @ 19.2 VA Current Draw: 800 MA Operating Temperature Range: –10° C to 40° C Physical Connections: Plug-In Connection Terminals: Screw Type #6 Universal Pan Head Safety Approval: UL Listed CSA Certified
RP32508–Hard Wire Transformer Specifications General: Supplies power for up to 10 Delta 547 Series electronic units already converted to hard wire Input Voltage: 120 VAC @ 60 Hz Output Voltage (unloaded): 24 VAC ± 3% @ 20 VA Current Draw: 800 MA Operating Temperature Range: 130° C Maximum Temperature Physical Connections: Universal Mounting Clip Wire Size: #18 AWG Wire Length: 11.75" Wire Ends: Stripped (Black/White) Terminals: Screw Type #6 Universal Pan Head Safety Approval: UL Listed Class 2 CSA Certified Class B Insulation System
RP32494
CAU
TION
Huiero fhjhj i iuodfh jfkjfujiufoiuerh. uudhfh irhejqh Ylfk ljff poilu r hjfajfjoir olpiu Hmjku mjoukl uer . ihelel
:
RP32508
RP32856
WARRANTY • Lifetime Faucet and Finish Limited Warranty to the original consumer purchaser to be free from defects in material and workmanship. • 5 Year Limited Warranty for usage in all industrial, commercial and business applications.
Indianapolis, Indiana 46280 A Division of Masco Corporation of Indiana © 2006 Masco Corporation of Indiana
