Transcript
DT4000 Series
International Fiber Systems, Inc.
Four Port Active Optical Star Coupler
FEATURES • Multimode or Single Mode (LED or Laser) • Distances to 37 miles (60 km) • Optical signal input to any port is amplified and repeated to all other ports • Ambient Operating Temperature -40° C to +74° C • Status LED identifies Receiver Port • Each port allows bi-directional communication
SPECIFICATIONS Data Rate:
DC-100 Kbps (NRZ)
Operating Mode:
Simplex or Full Duplex
Bit Error Rate:
< 1 in 10-9
Operating Temp:
-40° to 74° C
Storage Temp:
-40° to 85° C
Relative Humidity:
0% to 95% (non-condensing)*
Wavelength: DT4010: DT4020: DT4030:
850 nm 1300 nm 1300 nm
Number of Fibers:
8
Power:
+12 VDC @ 250 MA
MTBF:
>100,000 hours
Connectors Optical:
ST
Power and Extender:
Terminal plug with screw clamps
Size (in.) (LxWxH):
9.0 x 6.0 x 1.0
PLUG AND PLAY OPERATION • • • • •
No Electrical or Optical Adjustments Transparent to data encoding Hot Swappable Rack Modules Supports data rates to 100 Kbps Distances up to 37 miles (60 km)
SYSTEM FLEXIBILITY • • • •
Bus or Repeater Networks Simplex or Full Duplex 850 nm or 1300 nm Multimode or Single Mode
QUALITY DESIGN • • • • • •
Meets NEMA Temperature Specifications U.L. Listed, CE Approved Mil-Grade Circuit Board Automatic Resettable Fuses 100,000 Hours MTBF Lifetime Warranty
APPLICATIONS • Intelligent Transportation Systems • Electronic Tollway Systems • Building Environmental Control Systems
*May be extended to humidity with condensation conditions by adding suffix “C” to model number for conformal coating.
International Fiber Systems, Inc. • (203) 426-1180 • FAX (203) 426-3326 • www.ifs.com •
[email protected]
DT4000 Series OPTICAL POWER BUDGET Fiber
Wavelength Model No.
850 nm
ENGINEERING SPECIFICATIONS
Transceiver Optical Maximum Output Power Sensitivity Power Budget Distance
DT4010
50 µw (-13 dBm)
DT4020
20 µw (-17 dBm)
17 dB
3 miles (4.8 km)
13 dB
8 miles (13 km)
20 dB
37 miles (60 km)
62.5/125* 1 µw (-30 dBm)
1300 nm
9/125
DT4030
100 µw (-10 dBm)
*For 50/125 Fiber, subtract 4 dB from Power Budget
SYSTEM DESIGN
D1010/1110 Host Remote Panel
Remote Panel
Remote Panel
2 Fibers 62.5/125 MM 3 miles (4.8 km)
RS-232 or RS-422
D1010/1110 Expander
RS-232 or RS-422
DT4010 Expander
D1010/1110 RS-232 or RS-422
The fiber optic data transceiver shall be an IFS DT4000 series. The unit shall act as an active optical fiber optic star over standard 62.5/125 multimode or 9/125 single mode fiber optic cable. The transceiver shall have LED receive and transmit status indicators. The unit shall be fully transparent to either data protocol and no user adjustments shall be required for protocol selection. The unit shall provide for transmission distances up to 37 miles (60 km) without requiring manual adjustments or optical attenuators, and the optical dynamic range shall exceed the optical power budget specifications. All printed circuit boards shall be manufactured from Mil-Grade specification circuit board material. The housing shall be all metal construction with all connections identified with silk screened markings. The unit shall be available in surface mount versions. The units shall have solid-state limiters on all power lines which shall provide for automatic reset. The transceiver shall be U.L. Listed. The unit shall be fully compliant with TS-1/ TS-2 environmental NEMA and Caltrans Traffic Signal Control Equipment specifications for operating and storage temperature, shock, vibration, humidity and voltage transient protection. The units shall be able to be wired together to expand the system to up to 28 optical ports without internal or external adjustments.
D1010/1110 RS-232 or RS-422
MADE IN THE USA ORDERING INFORMATION DT4010
4 port active optical star (850 nm, 8 Fibers, multimode)
DT4020
4 port active optical star (1300 nm, 8 Fibers, multimode)
DT4030RS-485 4 port active optical star (1300 nm, 8 Fibers, single mode) PS-12DC
12 Volt DC plug-in power supply (included)
Regulatory Agencies / Approvals:
GSA Contract # GS-03F-5043C
International Fiber Systems, Inc. International Headquarters 16 Commerce Road • Newtown, CT 06470 Sales: (203) 426-1180 • Fax: (203) 426-3326 Email:
[email protected] • www.ifs.com
Due to our continued effort to advance technology, product specifications are subject to change without notice
4.29.99
International Fiber Systems, Inc. • (203) 426-1180 • FAX (203) 426-3326 • www.ifs.com •
[email protected]
