Transcript
DTRX3
TELEMETRY RECEIVER 17 FUNCTIONS
• Microprocessor controlled • 17 function
DTRX3
• Standard presets • RS232, Current Loop or RS485 • Remote controllable up to 1200 m (RS485) • IP56 weatherproof protection
DTRX3+DTCOAX Telemetry receiver
max 16 cameras DTCOAX
max 4 keyboards
DCJ
DCJ
Twisted pair RS485 (max distance 1200 m) Twisted pair RS485 (max distance 1200 m) only telemetry Video-coax only Video and telemetry coax (max distance from matrix 350 m)
The DTRX3 is a digital receiver, controlled by a microprocessor, for remote control of a Pan & Tilt motor, motor-driven zoom lens, wiper, washer and auxiliary contacts (12V = and 24V } camera power supply, 2 dry contacts). Connection to the control unit can be RS232, RS485 or Current Loop. This digital receiver can be controlled by DCT, DCJ, DCTEL and DCIR keyboards or by PC via RS232 serial connection. A IP56 weatherproof box ensures protection against all weather conditions. It is also possible to plug-in the DTCOAX optional board for data transmission on coax cable through the SM series matrix. 6 PG11 cable glands make connections easier. By means of a commutator, it is possible to select the Pan & Tilt voltage (230V } or 24V }) for the model DTRX3.
11
TELEMETRY
SM164A
RECEIVERS: DTRX3
New telemetry receiver 17 functions (CL/RS485/RS232), 230VAC 50/60Hz, with included preset and alarm card
DTRX324
New telemetry receiver 17 functions (CL/RS485/RS232), 24VAC 50/60Hz, with included preset and alarm card
ACCESSORIES: DTCOAX
Rev. 02.04
Over the coax board for DTRX3 (only trough matrix series SM)
www.videotec.com
DTRX3
147
DTRX3
11
TELEMETRY RECEIVER 17 FUNCTIONS
P&T AUTOTEST/LOCAL CONTROL ADDRESS SELECTION P&T AND WIPER VOLTAGE SELECTION
INPUT/OUTPUT DATA
TECHNICAL DATA GENERAL • 17 Functions: UP, DOWN, LEFT, RIGHT, AUTO,WASHER,WIPER, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR, IRIS OPEN, IRIS CLOSE, AUX1, AUX2, AUX3, AUX4 • 999 selectable address through Dip Switches • Serial input selectable: RS232 / Current Loop / RS485 • Repeater RS232, RS485 or Current Loop for daisy chain configuration • Ability to use both polarity inversion lenses and common wire lenses • LED indicating power supplied to the unit • LED indicating active function • EEPROM for the storage of active options • 16 bit microcontroller with re-programmable Flash memory • Trimmer for the adjustment of the lens voltage (from 3V= to 12V=) • PRESET / SCAN / PATROL functions with an authomatic recognition of the existing functions • Self-test installation procedure • Ability to memorize up to 40 PRESET functions (P&T motor, lens) • 4 alarm contacts set as N.O. or N.C. • Supplied with: instruction manual, 2 PG11 blanking caps, 4 wall mounts with relevant fastening screws
MECHANICAL • Plastic material enclosure • 6 cable glands PG11 • External dimensions: 337x237x128 mm (13.2x9.3x5 in)
ELECTRICAL DTRX3 • Power supply: 230V~ 50/60Hz • Consumption: 60W • Max switching power: 100W • Power supplied to the positioning device: 24/230V~ 50/60Hz selectable • Power supplied to the wiper: 24/230V~ 50/60Hz selectable • Power supplied to the washer: 24/230V~ 50/60Hz • Power supplied to the camera: 12V= max 350mA (AUX1) and 24V~ max 180mA (AUX2) • Power supplied to the lens: from 3V= to 12 V= (max 100mA) • 2 Dry contacts: 1A 230V~ 1A 24V~ (AUX3, AUX4) • Fuses: F2: 1 AF 250V, F5: 2.5 AF 250V DTRX324 • Power supply: 24V~ 50/60Hz • Consumption: 40W Unit Weight (kg / lb): DTRX3: 3,6 / 7.9 DTCOAX: 0,02 / 0.04
148
Package Weight (kg / lb): DTRX3: 3,9 / 8.6 DTCOAX: 0,1 / 0,2
• Max switching power: 100W • Power supplied to the positioning device: 24V~ 50/60Hz • Power supplied to the wiper: 24/230V~ 50/60Hz • Power supplied to the washer: 24/230V~ 50/60Hz • Power supplied to the camera: 12V= max 350mA (AUX1) and 24V~ max 180mA (AUX2) • Power supplied to the lens: from 3V= to 12 V= (max 100mA) • 2 Dry contacts: 1A 230V~ 1A 24V~ (AUX3, AUX4) • Fuses: F5: 6.3 AF 250V
COMMUNICATIONS • Selectable communication speed (38400 / 19200 / 9600 / 1200 / 300 Baud) • Repeater RS232, RS485 or Current Loop for daisy chain configuration • Telemetry data input on coax cable RG59 or equivalent with DTCOAX optional board for a max distance 350 m (1150 ft) from Matrix Series SM • Telemetry data input RS485 on Matrix Series SM serial output for a max distance of 1200 m (3900 ft) • Telemetry data input RS485 on keyboards serial output for a max distance of 1200 m (3900 ft) • Telemetry data input RS232 for PC or keyboard control for a max distance of 15 m (49 ft) • Telemetry data input Current Loop on keyboards serial output for a max distance of 1500 m (4900 ft)
RELATED PRODUCTS P&T: PTH900P, PTH300P, NXPTH200, IPT, IPTS, IPHS series Keyboards and Matrix: DCTEL, DCIR, DCJ, DCT keyboards and SM series matrix Retrofit on discontinued products: contact Videotec for further specifications.
ENVIRONMENT • Indoor/outdoor • Operating temperature: 0°-50°C (32°-122°F)
COMPLIANCE TO • CE in compliance with EN50081-1, EN50130-4, EN60065 • IP56
Package Dimensions (cm / in): DTRX3: 34x24x15 / 13.38x9.44x5.9 DTCOAX: 8,5x5,5x11,5 / 3.3x2.2x4.5
Master Carton (units): DTRX3: DTCOAX:
VIDEOTEC ITALY: E-mail:
[email protected]
VIDEOTEC U.S.A.: E-mail:
[email protected]
VIDEOTEC FRANCE: E-mail:
[email protected]
VIDEOTEC HONG KONG: E-mail:
[email protected]
