Transcript
DTRX3
17 FUNCTION TELEMETRY DATA RECEIVER
• Microprocessor controlled • 17 functions • Standard preset • RS232, Current Loop or RS485 • Controllable from max 1200 (RS485) • IP56 weather-proof protection
DTRX3 telemetry receiver
DTRX3 telemetry receiver
SM82A max 8 cameras
max 2 keyboards
DCIR
DCTEL Twisted pair RS485 (max distance 1200m)
Twisted pair RS485 (max distance 1200m) only telemetry Video-coax only
The DTRX3 is a microprocessor-controlled digital receiver for the remote control of a pan & tilt, motordriven zoom lens, wiper, washer and auxiliary contacts (12V— … and 24V~ camera power supply, 2 dry contacts). Connection to the control unit can be carried out in RS232, in RS485 or in Current Loop. This digital receiver can be controlled by DCJ, DCTEL and DCIR keyboards or by PC via RS232 serial connection. An IP56 weather-proof box ensures protection against all weather conditions. It is also possible to plug-in the DTCOAX optional board for data transmission on coax cable through SM series matrix. The 6 PG11 cable glands make connections easier. By means of a switcher, it is possible to select the pan & tilt power supply (230V or 24V).
TELEMETRY
DTCOAX
10
Video and telemetry coax (max distance from matrix 350m)
MODELS DTRX3
Rev_04.2003
17-function telemetry receiver (CL/RS485/RS232), 24/230VAC 50/60Hz, with preset and alarm card
www.videotec.com
DTRX3
103
10
DTRX3 17 FUNCTION TELEMETRY DATA RECEIVER
P&T AUTOTEST/LOCAL CONTROL ADDRESSES SELECTION
INPUT/OUTPUT DATA
TECHNICAL DATA GENERAL: • 17 Functions: UP, DOWN, LEFT, RIGHT, AUTO,WASHER,WIPER, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR, IRIS OPEN, IRIS CLOSE, AUX1, AUX2, AUX3, AUX4 • 999 addresses selectable through Dip Switch • Serial input selectable among RS232 / Current Loop / RS485 • Repeater RS232, RS485 or Current Loop for daisy chain configuration • Possibility of using both polarity inversion lenses and common wire lenses • Led indicating power supplied to the unit • Led indicating active function • EEPROM for storing active options • 16 bit microcontroller with re-programmable Flash memory • Trimmer for the adjustment of the lens voltage (from 3VÙ to 12VÙ) • PRESET / SCAN / PATROL functions with automatic recognition of existing functions • Possibility of memorising up to 14 PRESET functions (Pan&Tilt motor, lens) • 4 alarm contacts set as N.O. or N.C. • Supplied with: instructions manual, 2 PG11 blanking caps, 4 fastening brackets for wall mounting
MECHANICAL: • Plastic box • 6 cable glands PG11 • External dimensions 310 x 310 x 130 mm (12”x12”x5”)
ELECTRICAL/VIDEO: • • • • •
Power supply: Consumption: Max switching power: Power supplied to P&T: Power supplied to the camera:
• • • •
Power supplied to the lens: Lens adjustment trimmer: 2 Clean contacts, capacity: Power supplied to the wiper:
230 V~ 50 Hz 60 W 100 W 24/230 V~ 50 Hz selectable 12 V max 350mA (AUX1) and 24 V~ max 180mA (AUX2) 3 - 12 V (max 100mA) (3 - 12 V) 1A 230V~ 1A 24V—… (AUX3, AUX4) 24 V~ 50/60 Hz /230 V~ 50 Hz selectable
Unit Weight: DTRX3: 2,7 kg (5.9lb) DTCOAX: 0,02 kg (0.04lb)
104
Package Weight: DTRX3: 3 kg ( 6.6lb) DTCOAX: 0,1 kg ( 0.2lb)
• Power supplied to the washer: 230 V~ 50 Hz • Fuses: F2: 1 AF 250V, F5: 2.5 AF 250V
COMMUNICATIONS: • Selectable communication speed (19200 / 9600 / 1200 / 300 Baud) • Repeater RS232, RS485 or Current Loop for daisy chain configuration • Telemetry data input on coax cable RG59 o equivalent (max distance 350 m (1150ft) from matrix SM series) with DTCOAX optional board • Telemetry data input RS485 on matrix SM series serial output ( max distance 1200 m (3900ft) • Telemetry data input RS485 on keyboards serial output (max distance 1200 m (3900ft) • Telemetry data input RS232 for PC or keyboard control (distance 15 m (49 ft) • Telemetry data input Current Loop on keyboards serial output (max distance 1500 m (4900ft)
ACCESSORIES: DTCOAX Over the coax board for DTRX3 for command reception (only trough matrix series SM)
RELATED PRODUCTS: Keyboards: DCTEL, DCIR, DCJ P&T: PTH900P, PTH300P, NXPTH200, IPT, IPTS, IPHS series Retrofit on discontinued products (contact Videotec for further specifications)
ENVIRONMENT: • Indoor/outdoor • Operating temperature: 0° – 50°C (32°-122°F)
STANDARD CERTIFICATIONS: • CE in compliance with EN50081-1, EN50130-4, EN60065 • IP56
Package Dimensions: DTRX3: 34x24x15 cm (13.4”x9.4”x5.9”)
Master Carton:
VIDEOTEC ITALY - E-mail:
[email protected]
VIDEOTEC U.S.A. - E-mail:
[email protected]
VIDEOTEC FRANCE - E-mail:
[email protected]
VIDEOTEC HONG KONG - E-mail:
[email protected]
