Preview only show first 10 pages with watermark. For full document please download

Dtv Power Inserter/polarity Locker

   EMBED

Share

Transcript

DTV Power Inserter/Polarity Locker SPECIFICATION DIRECTV® Approved Model Number System Impedance Operating IF Frequency Range Number of Input Ports Number of Output Ports Port to Port Isolation (Input to Output) Insertion Loss per Port Input Return Loss Output Return Loss DC Switch Mode Power Supply DC Power Jack Connection DC Voltage Provided to the Input Ports Port #1 Port #2 Port #3 Port #4 Port #5 (Flex port #1) Port #6 (Flex port #2) Polarity Locker Current Consumption Power Passing Ports Current Rating DC Block on Output Ports DC Voltage LED Indicator Operating Environment Operating Temp Range Ground Lugs Mounting Tabs Housing (W x L x D) Weight Master Carton Quantity DTV6PWRPOL-02 75 ohm 250 – 2150 MHz 6 6 35 dB 1.5 dB max over operating frequency range and temp. 10.0 dB 10.0 dB Operates with PI-29, 29VDC switch mode power supply device. Power supply required, NOT Included F-connector Typical 20.0 +/13.0 +/20.0 +/13.0 +/20.0 +/20.0 +/- 0.5 VDC 0.5 VDC 0.5 VDC plus 22 KHz Tone Fixed 0.5 VDC plus 22 KHz Tone Fixed 0.5 VDC 0.5 VDC 100 mA 1000 mA All Ports are DC power passing (from any Output to any input port). DC power only passes towards the ODU All output ports are DC blocked. Device does not pass DC voltage Green Power LED indicating power from PI29 Power Supply LED is on if voltage is 21 VDC or greater (+/-5%) Power LED VDC >21 = Green LED VDC <21, but >0 = Red LED No VDC = No LED Indoor or Lock Box (Note: Unit shall not be exposed to direct outdoor elements) -40C° to +65C° Two (2) – One on each side of housing Two (2) – 8.5” center-to-center 8.0” x 5.25” x 1.0” (with F connectors measured) 1.45 Lbs 20 DTV Power Inserter/Polarity Locker SPECIFICATION