Transcript
Dual DVI
Hot-Key Command
What is USB DDM
USB
TM
TM
USB Devices
1. Hot-key selection
USB Devices PC KVM 100% device mapping
UDD-12+/UDD-12A+
Touch-screen
UDD -12A+ / MASTER-IT
USB KVM SWITCH w/
Ctrl
Hot-Key Select
Shift Scroll Lock
Hot-key
Caps Lock
wireless keyboard and mouse
USB DDM port
UDD -14A+ / MASTER-IT
Reset
USB KVM SWITCH w/
wireless keyboard and mouse
Monitor AND Ctrl
3
4
Master-IT USB Plus+ - Advanced USB KVM switch w/ DUAL DVI Monitor, DDM, and multi-hotkey
Installation Guide
Hot-key
Hot-Key Shift Select Scroll Lock Caps Lock
USB 2
100% device mapping
100% device mapping
Controller
Controller
2. Hot-key and functions Hot-key
Hot-key
1
Hot-key
Hot-key
Z
S
UDD-14A+
Connect cables 60 mm ( 2.36 inch )
1
2
3
UDD-14+
44 mm ( 1.73 inch )
UDD-12A+ UDD-12+ UDD-12+
44 mm ( 1.73 inch ) 275 mm ( 10.83 inch )
Special note: LED light will be quickly flashing while the KVM is mapping out the device.
UDD -12A+ / MASTER-IT
USB KVM SWITCH w/
Connect Power Adaptor
Connect console Computer system to KVM port 1. Dual Monitor 1. KVM cable 2. Mouse 2. DVI cable 3. Keyboard 3. Headphone / Microphone 4. Headphone / Microphone cable ( A+ Model ) ( A+ Model ) Special note: If your device cannot work in rear console DDM ports properly, please connect it to the hub ports on the front panel. The rear console DDM ports will only function properly with HID devices.
Hot-key indicator ( both LEDs not lit = hot-key has been disabled )
Press button to select port for control
Use keyboard hot-key to select port
USB
USB 1
DVI-D 1
E Power input DC 5V 2000 mA Master-IT USB switches are designed for effectively save energy.
DVI-D 2
DVI-D 1
Turn on Auto Channel Scan
= last setting interval , default = 5 seconds 1
~
5
= 5, 8, 15, 20, 30 seconds
Hot-key
H
1
P
Hot-key
Hot-key
H
0
P
1 0
~
Assign USB #1 to a certain port Default USB port setting ( Sync with KVM port selection ) 4
4. Assign video port command (independent video port switch) Hot-key
Hot-key
Q
Hot-key
Hot-key
Q
Hot-key
Hot-key
W
Hot-key
Hot-key
W
1
~
0
4
Assign video port #1 to a certain port
Video port #1 turn back to Sync switch mode 1
~
0
4
Assign video port #2 to a certain port
Video port #2 turn back to Sync switch mode
Hot-key
O
1
~
4
Assign audio port to a certain port
Features & Benefits
Ctrl
Hot-Key Shift Select Scroll Lock
Via RJ-45 serial port control commands issued from a terminal application such as Hyper Terminal, Terra Term, and Putty.
DVI-D 2
5V DC in
N
Hot-key
Hot-key
Monitor AND
IR Remote Control Sensor Push-button selection Hot-key selection
S
5. Assign audio port command
Port Selection
Caps Lock
USB 2
N
Hot-key
UDD-12A+
Reset
Turn switching confirmation buzzer sound on/off
3. Assign USB port command 60 mm ( 2.36 inch )
Front & Rear View
Switch to Port #1 ( ~ Port #4 )
Turn off Auto Channel Scan by pressing any key
UDD-14A+
UDD-14+
4
~
Default = buzzer sound off Hot-key
Product View
New Hot-key
K
100% device mapping
UDD-14+/UDD-14A+
UDD-12+ / UDD-12A+ / UDD-14+ / UDD-14A+
Ctrl
Default Hot-key = Touch-screen
Monitor AND
Reset
Via front panel Hot-key select button Via Hot-key control
DVI-D 2
DVI-D 1
F
USB 2.0 HID DDM console connections for mouse and keyboard devices USB device sharing port ( high speed USB 2.0 ) Headphone / Microphone ( A+ Model ) Serial port for extra control and firmware upgrade E Two DVI-D dual link for digital display monitors F KVM ports for connecting systems
Via Mouse-click switching - An optional function activated through use of special hot-key command.
Use IR remote controller for selecting port ( optional )
100% compatible with USB HID devices ( with USB DDM ports ) Compatible with Windows 98, 2000, XP, Vista, Windows 7,8, 10, Linux and Mac OSX Front panel push-button for easy channel selection User selectable multi-hotkey ( Control, Shift, Scroll Lock, Caps Lock ) Backlit push-button with multi-color LED for easy monitoring and selection Built-in IR remote receiver Buzzer sound for channel switching confirmation Plug-and-Play system configuration Additional USB ports for device sharing, or to assign to a certain port Assign video and audio to a certain port No drivers needed for keyboard and mouse operation RS-232 control and firmware upgradable Two DVI interface, support Dual-Iink DVI-D display Max video resolution supported 2560 x 1440 Built-in All-time Full DDC ( Active - DDC to all connected systems ) Headphone / Microphone interface for each port ( A+ model ) 3-year Warranty
Ordering Information
Specification
UDD-12+
UDD-12A+
UDD-14+
UDD-14A+
Functional Computer port number
2
4
Panel button control
2
4
PC On-Line - Green , Selected - Red , Both - Orange
Button LED color indication IR remote control
Yes ( Built-in receiver, controller optional )
Hot plug-and-play
Yes
Hot key control
Yes
Description
UDD-12+
2-port USB Dual DVI KVM Switch with DDM
UDD-12A+
2-port USB Dual DVI KVM Switch with Audio and DDM
UDD-14+
4-port USB Dual DVI KVM Switch with DDM
UDD-14A+
4-port USB Dual DVI KVM Switch with Audio and DDM
Optional part / accessory Cables
Yes ( Hot key )
Auto scan
Model
Selectable scan interval
5, 8, 15, 20, 30 sec ( Hot key )
Beep sound
On / Off ( Hot key selectable )
Cable length
5M ( 15ft ) at Console; 5M ( 15ft ) at PC
SDU-06D
6-ft DVI-D & USB KVM cable
SDU-10D
10-ft DVI-D & USB KVM cable
SDU-15D
15-ft DVI-D & USB KVM cable, special length of KVM cables are available ( 25-ft, 50-ft )
Max 2560 x 1440 , DDC1 / DDC2B
Resolution Keyboard & Mouse
USB B x 2
USB B x 4
DVI-202-06D
6-ft DVI-D DVI cable
Monitor 1
DVI-24+5 Female x 2
DVI-24+5 Female x 4
DVI-202-10D
10-ft DVI-D DVI cable
Monitor 2
DVI-24+5 Female x 2
DVI-24+5 Female x 4
DVI-202-15D
15-ft DVI-D DVI cable
CAS-202-06
6-ft audio cable
CAS-202-10
10-ft audio cable
CAS-202-15
15-ft audio cable
System connectors
Audio
Speaker x 2 , Mic x 2 (3.5mm)
No
Speaker x 4 , Mic x 4 (3.5mm)
No
Keyboard & Mouse
USB A x 2 ( DDM Technology )
Monitor 1
DVI-24+5 Female x 1
Console connectors
DVI-24+5 Female x 1
Monitor 2 Audio
Power Adaptor
Speaker x 1 , Mic x 1 (3.5mm)
No
Total USB device sharing port
Speaker x 1 , Mic x 1 (3.5mm)
No
USB A ( USB 2.0 ) x 4
Height
44 mm ( 1.73 inch )
60 mm ( 2.36 inch )
Width
275 mm ( 10.83 inch )
275 mm ( 10.83 inch )
Depth
131 mm ( 5.16 inch )
131 mm ( 5.16 inch )
1200 g ( 2.65 lb )
1300 g ( 2.87 lb )
Power supply DC 5V ( 2000 mA ) - AC 110/220V for USA * Any other interface is available upon request
Mechanical
Weight
TM
3A-111WX05
1500 g ( 3.3 lb )
IR Remote Controller RC-01
IR remote controller for 2-port & 4-port KVM Switch
Rack Mounting Kit
1600 g ( 3.53 lb )
RMK-1901
19” rack mounting bracket set for 4-port KVM Switch
RBK-19
19” rack mounting cable support bar
Power DC 5V ( 2000 mA )
Operating voltage Power frequency Power consumption
50-60 Hz 7.5 W
8W
8.5 W
9W
Limited Warranty For ConnectPRO KVM Switches
Certification FCC, CE
ConnectPRO offers a 3-year limited warranty for all of its KVM Switches and KVM Switch modules. ConnectPRO stands behind its products assured that you're purchasing a proven technology with quality and reliability.
ConnectPRO - USA, Taiwan www.connectpro.com Corporate Office 20525 Paseo Del Prado Walnut, CA 91789, USA Tel +1-909-444-9288 Fax +1-909-444-9289
Design Center and Operational Hubs 13F., No.120, Sec. 1, Sanmin Rd., Banciao Dist., New Taipei City 220, Taiwan, R.O.C. Tel +886-2-8964-2700 Fax +886-2-8964-2977
IG-UDD1214APLUS_V1-0
