Duofix Frame For Wall Hung Wc, H114 With Sigma Cistern

Transcript

Duofix frame for wall hung WC, H114 with Sigma cistern 8cm 2016 series Application Purposes           For drywall construction For installation in part or room height prewall installations For installation in a loadbearing stud wall For wall-hung WC with connection dimensions in accordance with EN 33:2011 Suitable for wall-hung WCs with projection up to 70cm For single flush, or dual flush. For floor construction 0-20cm For installation of a wall-hung WC with bolt fixings set at 180 or 230mm centres For connecting Geberit AquaClean Any wall boarding must be fixed tight against the face of the DuoFix frame and screwed directly to the frame. Characteristics                   Series 2016 Installation depth of 80-110mm drainage dependant. (side drainage increase installation depth) Frame Height 1140mm Adjustable flushing volume Large flush 7.5, 6, 4.5 litre Small flush 4,3 litre Factor set flush 6 and 3 litre Suitable for all Sigma flush actuation plates (except Sigma40) Sound-absorbing actuator rods, tool free, fast adjustment Suitable for Type01 and Type10 flush buttons M12 threaded rods for ceramic fastening Front actuation only Self-supporting frame, powder coated Frame with Ø 9mm fixing holes for fastening in to timber frame construction Frame suitable for ceramic WC appliances with small contact surface (with pressureresistant wall covering) Leg support, zinc-plated, infinitely variable in height Non-slip leg supports Foot plate depth suitable for installation in U-profiles UW 50 and Geberit Duofix system rails                Connection bend can be installed without tools at different depths Connection bend can be mounted vertically with front flush Waste connector bend, extended, for connection in floor Fastening for connection bend, sound-absorbing Concealed cistern with front actuation, fully insulated against condensation Cistern fulfils standard requirements in accordance with EN 14055, Class II Immediate post flush possible with factory setting Tool-free installation and maintenance work on concealed cistern Water supply connection at the top, offset to left side Universal water supply connection compatible with MeplaFix, can be mounted and operated without tools. Connection hose to angle stop valve can be fastened without tools Protection cover box for service opening protects against moisture and dirt Protection box for service opening can be adjusted to length without tools, suitable for surface-even actuator plates Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Cistern can be operated with recycled water (rainwater) provided it is passed through a filter system. Technical Data Flow Pressure Maximum Operating temperature, water Flush Volume, Factory setting 10-1000kPa 25oC 5.8 and 3 litre Scope of delivery          Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel Protection box for service opening 2 wall anchors Connection set for WC, ø 90 mm Connection bend 90° made of PE-HD, ø 90 mm Adapter socket made of PE-HD, ø 90 / 110 mm 2 protection plugs 2 threaded rods M12 Fastening material Order Table Art. no. 111.799.00.1 Colour / Surface Duofix Blue Logistic Data Art. no. PU1[Pc.] PU4[Pc.] 111.799.00.1 1 12 PU1 - L x W x H[mm] 1200 x 540 x 145 VP4 - L x W x H[mm] 120. x 800 x 1310 Gross weight[kg] Net weight[kg] 16.61 15.19