Transcript
Duplexvent DV180/370/510SE Interactive Line Side Entry - Up to 510 m3/hr air volume
Key Features
F or use in small, medium and large sized dwellings up to 280 m2 * ● 3 models (side entry) up to 500 m3/hr at 100 Pa ● Galvanised steel, double skin casing ● Over 90% thermal efficiency and low noise ● Automatic, 100% summer bypass ● Versatile design (automatic switch between right / left hand configurations) ● Remote control via laptop or smart phone ● Internet connection with service interface ● Ten speed digital control with BMS ● Optional constant flow function ● Compliant to PASSIVE HOUSE Institute and ErP 2015 standards ● 5 year warranty+ ●
Duplexvent DV180/370/510SE The Duplexvent Interactive Line DV180SE, DV370SE and DV510SE are highly efficient, side entry mechanical supply and extract ventilation units with heat recovery for an air capacity of up to 510 m3/hr. It is a ceiling mounted unit and is delivered complete with a full condensate drain kit. The unit is made of galvanised steel and has a double-skin casing which is insulated with 30mm thick polyurethane
(U = 0.65 Wm-2K-1) to eliminate any thermal bridging and minimise noise levels. The units include an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air where its thermal efficiency exceeds 90%. At no point do the airstreams mix.
airflow.com
Duplexvent DV180/370/510SE Interactive Line Side Entry - Up to 510 m3/hr air volume
100% Automatic Bypass
Exhaust Air Outdoor Air
The unit is equipped with an automatic, 100% bypass which totally isolates the heat exchanger so that no air passes through it. This provides effective cooling in the summer season. Supply Air to the dwelling
Extract Air from the dwelling
Technical Data Specification
Duplexvent DV180SE
Duplexvent DV370SE
170 / 47
350 / 97
500 / 139
Over 90%
Over 90%
Over 90%
Counterflow (Plastic)
Counterflow (Plastic)
Counterflow (Plastic)
EC
EC
EC
100% automatic
100% automatic
100% automatic
Reducing supply air
Reducing supply air
Reducing supply air
Air flow m³/hr / l/sec @ 100 Pa Thermal efficiency Heat exchanger Fans Summer bypass damper Frost protection
Controls DUPLEX 190 ECV4 1
4
2
1
B
3
Sound level @ 3m (dB(A))
10-Speed - Digital
MODBUS (TCP/IP)
MODBUS (TCP/IP)
MODBUS (TCP/IP)
Under - Ceiling
Under - Ceiling
Under - Ceiling
4
226
3
Duct diameter (mm) A
4 x 160
Condensate discharge (mm) RM Max. Power consumption
Filter class
16
16 230v / 1ph / 50Hz
100w
180w
375w
2 x G4 (optional F7)
2 x G4 (optional F7)
2 x G4 (optional F7)
1
Water post-heater
4 x 250
230v / 1ph / 50Hz
900w (optional)
1500w (optional)
2100w (optional)
900w 4 (optional)
1500w (optional)
2100w (optional)
1000w (optional)
1700w (optional)
2400w (optional)
30
30
30
28
32
38
830 x 585 x 280
1120 x 840 x 280
1290 x 860 x 365
90000294
90000295
90000296
D
Electric post-heater
32 -51
4 x 200
16
DUPLEX 520 ECV4
Electric frost heater
32 - 49
230v / 1ph / 50Hz
A
E
Electrical supply
3
Casing insulation (mm) Weight (kg)
- 48
K
A
Dimensions (L x D xC H) mm Part No.
B
Mounting
10-Speed - Digital
B
Connection to BMS
DUPLEX 10-Speed 390 ECV4- Digital
Duplexvent DV510SE
2
Dimensions
Performance 1200
D 2
3
B
A
C
A
Right hand connections
Left hand connections
1. Supply air to rooms 2. Outdoor air to the unit 3. Extract air to the unit 4. Exhaust air outside
1. Exhaust air outside 2. Extract air to the unit 3. Outdoor air to the unit 4. Supply air to rooms
A
A 60 60 60
B 830 1120 1290
C 280 280 365
600 400
0
+ excludes motors. Motor warranty one year from date of purchase. For detailed information and 2D or 3D blocks in DXF use our Model DV180SE DV370SE DV510SE
800
200
B
selection software.
DV510SE DV370SE DV180SE
1000
1
RM
STATIC PRESSURE (Pa)
4
0
30
0
100
60 200
90
120
300 400 AIR FLOW
500
150 600
180 l/sec m3/hr
* Guidance only. Dependant upon system pressure. D 585 840 860
Accessories See switches/accessories for more details.
All the Interactive Line units incorporate an integrated web server with user and service interfaces which enable unit control and monitoring from a remote location. With this unique feature you can control your unit via a computer, laptop or smart phone in order to maintain the optimum operation at all times. Similarly a service technician can connect to the unit remotely, check the status, diagnose any faults and instruct the user what to do immediately, saving service and down time costs. The units include a digital controller with LCD display which incorporates 10-speed air flow control, weekly ventilation programming, filter maintenance indicator, automatic frost protection facility and automatic boost function with delay timer.
The units are also continuously checked for any faults by the integrated Failure Diagnostic System which alerts the user as soon as it detects any unusual operation hence providing a real time maintenance update. On-demand ventilation can be achieved by using humidity, CO2 and air quality sensors which boost the air volume gradually based on the moisture and occupancy levels in the dwelling. It is also possible to integrate the unit into a Building Management System (MODBUS TCP/IP) to monitor and control the unit’s functions by a central control system. Having the latest, low energy EC fan technology, the DV180SE, DV370SE and DV510SE comply with the ErP 2015 standards, are tested by TUV laboratories and come with an outstanding 5 year warranty+.
Controls The digital control provides the following features: ●
10 speed EC fan control
●
Filter monitoring and alert via pressure sensors
●
Daily / Weekly programme setting
●
BMS connection (Modbus TCP/IP)
●
Internet connection with user and service interfaces
●
Outputs for electric / water heater
●
Zonal ventilation control (winter / summer)
●
Constant flow / pressure control
●
●
●
●
utomatic boost function with timer delay (via volt-free A contact or 0-10V sensor output) utomatic frost protection reduces the supply ventilation A rate for a certain period to prevent ice build-up within the heat recovery cell depending on the outside air temperature utomatic, 100% summer bypass provides free cooling in A the summer season. Its motorised damper is triggered by the temperature sensor automatically Heater control for frost heater and post-heater
●
●
Indoor temperature control based on extract air / supply air / room temperature via 5 different sensors Demand ventilation via CO2, humidity and air quality sensors
Internet Connection Duplexvent Interactive Line units incorporate an Internet server that uses Modbus TCP/IP protocol to provide a connection between the ventilation unit and the internet via a standard plug and play ethernet cable. This allows you to monitor and control the unit from a computer, laptop or smartphone via the internet or a local area network. The unit can also be monitored remotely by technical service which saves time and cost on service processes.
Heaters The new generation PTC (Positive Temperature Coefficient) electric heater incorporates a power adjustment facility which automatically increases/decreases the power based on the air volume going through the heater hence shortens the heating response. Also the heater has two protection thermostats and a perforated metal filter which can easily be maintained via the inspection door. This significantly increases its life span especially when the heater is installed on the outdoor air side for frost protection purposes. Alternatively it can be used as post-heater to achieve the required indoor air temperature.
Call: 01494 560800
Visit: airflow.com Airflow Developments Limited Aidelle House, Lancaster Road, Cressex Business Park, High Wycombe, Buckinghamshire, United Kingdom, HP12 3QP
E-mail:
[email protected] Telephone: +44 (0) 1494 525252
airflow.com
© Airflow Developments Limited. Airflow
Developments Limited reserve the right, in the interests of continuous development, to alter specifications without prior notice. All orders are accepted subject to our conditions of sale which are available on request
Certificate No. EMS 569454 Certificate No. FM 00152 BS EN 1SO 14001 : 2004 BS EN 1SO 9001 : 2008
