Transcript
Door Unit Supported by all e-DATA Master Unit controllers, the Door Unit provides the interface for all access point control hardware and readers. Each door unit provides two reader connections supporting two control modes; single door secured exit or two individual doors using a “Request for Exit” configuration. From 4 to 12 Door Units are supported by the Master Unit controller series with each supporting two reader connections for a total of eight to 24 locally connected readers respectfully.
The Door Unit supports all standard access reader types: · EDR401 (e-DATA Biometric fingerprint) · HID proximity · HID iCLASS AWID · Legic · Mifare · EM · Hitag · Smart Card ISO 15693 / ISO 14443A · When configured using a Master Unit, the Door Unit supports all standard access control readers using an RS485 or Wiegand data connection. The Door Unit connects easily with a Master Unit controller using an RS485 connection to provide a scalable solution by simply adding additional Door Units for distances up to 4000 feet. All Door Unit connections come with pre-defined factory defaults that can easily be customized from a supported Master Unit controllers built-in access control application software.
Standards Support
The Door Unit and Master Unit controllers were developed around open standards supporting, XML data format, S.O.A.P for easy XML-based message integration and platform independent JAVA application software. The integrated web server and embedded access control application allow for easy access and setup via any standard web browser. This eliminates the need for traditional PC based servers and client side administration software while providing a powerful and economical hardware controller solution.
Features Supported Reader inputs (Wiegand/RS485 configurable) · Reader beeper and LED control · Local Power to Readers · Locking hardware/sounder · REX devices · Frame contact status · ·
· ·
Tamper/Lockdown RS485 communication with Master Units I/O remapping via Master Unit embedded application software
Easy to Use
To configure the embedded access control application on the controlling Master Unit, you simply select a network connected Master Unit under Network devices within Windows (UPnP) or type in the IP address of a Master Unit directly into any standard web browser, login to the system, and the application menu is displayed.
Access Control
Overview
Specifications Readers · ·
External
EDR401 (Fingerprint Key) Legic HID AWID Mifare EM Hitag SC ISO 15693 / ISO 14443A
· ·
· · · ·
Internal ·
· · ·
Mechanical Metal mount plate with plastic snap cover (standard) Rear and side cover access for cable connections Mounts in standard third-party locking enclosures
Dimensions 4.7 x 4.7 x 1.5 in (120 x 120 x 40 mm)
Power Input - 12 to 24V DC (24V DC recommended) Load - 190 mA plus connected readers (@12V DC)
Legic
Weight
Interface · ·
Reader Data (configurable)
Operating Temperature
2 x RS485 2 x Wiegand
32 to 104 °F (0 to 40 °C)
Relative Humidity
Alarm Interface Unit (AIU) ·
0 to 85%, non-condensing
1 dedicated
I/O (configurable) · · ·
6 x inputs 5 x outputs 2 x relays (Form C)
DC Power · ·
0.67 lb (300 g)
12 to 24V DC in 2 x 12V DC out to Readers
Network Protocols (via Master Units) · TCP/IP DHCP · TFTP · ICMP · IPv4 · IPv6 · HTTP · FTP · SNMP ·
Configuration Example (1-MU200 and 1-DU)
EXIT (Normally Open)
System Diagram (8 readers)
COM
Door Contact Reader 2 (Beeper)
PUSH TO
NC
Reader 2 (Green LED)
Door Status Contact
REX (Request Exit)
Electric Strike
+
Router +
_
ON
ON
5 4 3 2 1
5 4 3 2 1
5 4 3 2 1
DU 1
DU 2
DU 3
GREEN (Data 0) WHITE (Data 1) SHIELD (Ground)
YELLOW (Beeper)
ON
DU 0
ORANGE (Green LED)
Mag Lock 2 (Contact)
Door Unit Address Switch Settings ON
5 4 3 2 1
REX 2 (Input)
DC Power Source Electric Strike 2 (+ Terminal) Electric Strike 2 (+ Power)
Web Browser
Reader 2 (Data 0) Reader 2 (Data 1) Reader 2 (Ground)
10/100 Ethernet
RS485 Termination at Last Door Unit RED (12V DC) BLACK (Ground)
Master Unit MU200
Reader 2 (Power 12V DC)
Master Unit MU200
RS485 data connection Supports: 4-Door Units Wiegand 12 to 24V DC Power Source
RS485
Proximity Reader
DU
DU
RS485
(24V DC Recommended)
+
_
For illustration only, local municipality code may require alternate configuration
US Headquarters e-DATA Corporation 751Canyon Drive, Suite 150, Coppell, TX 75019 t. 866-807-3549 f. 972-350-0003 e.
[email protected] www.e-data.com ©2009 e-DATA Corporation. All rights reserved. Specifications subject to change without notice. DU ver 1.2, Jan 2009
environmentally friendly
e-DATA CERTIFICATIONS/AFFILIATIONS
UL294
DU
DU
RS485
