Transcript
Dust Director
Industrial Vacuum Cleaners for Construction, Industry & Healthcare Powerful Suction & Filtration Solutions for Tough Jobs, Rigorous Standards & Risk Protection: • • • •
Inhalation of Crystalline Silica Dust or Other Airborne Dust Particles – Just Can’t Possibly Be Any Good to Inhale . . . Contamination to Yourself, your Co-Workers, the Work Environment , Equipment, Occupants, Other Tradesmen. Proper Handling and Disposal of the Extracted Debris - Dry or Wet. Correcting the Hundreds of Wasted Hours of Productivity & the Expense of Labor to Cleanup – Whenever you create waste that you don’t have to handle or cleanup ~ you will always realize a significant savings in labor. • EPA & OSHA Enforcement – To Confirm to Higher Standards in Air Quality and Handling & Disposal of Waste.
Electrical Motors & Optional Tank Sizes to Exceed Capacity, Filtration & Productivity Requirements: • Higher CFM Ratings with Maintained Suction Performance to Improve Productivity when Extracting Fine Powders. • Or Higher Water Lift Ratings to Extract Heavier Debris such as Tons of Powder, Dirt, Metal, Sand, Rocks, Stones, Heavy Sludge, Liquids, etc. – For Increased and More Efficient Productivity and Safety. • Powerful Suction – with 1, 2 and 3-Motor Heads – Optimized to Function within the confides of 120 & 240 Volt Circuits. • Specific Filtration Systems to Extract Volumes of Fine Powders without Filter Blinding to Separating Solids from Liquids
Innovation, Performance, Versatility, Durability –
Dust Director® Industrial Vacuums
Uniquely & Simply Designed – to Handle Just About Any Application - From Fine Dust to Heavy Sludge Extraction . . .
Dust Director® Industrial Vacuums - Powerful Suction + Non-Clogging Filtration for Extracting Volumes of Silica Dust Vacuum Ultra Fine Powder - Mixed Debris - Dry or Moist - Hot Mastics, Sharp Objects, Etc . . . Collect Just About Anything - At the Same Time - Without Suction Drop.
Compact, Portable, Durable, Versatile – 10 ~ 55 Gal Collection Tanks; 1, 2 & 3-Motor Heads; 11 0 & 240 Volt Single Phase. Powerful Suction Maintained with Industrial Grade USA Motors & Non-Blinding AIRFlow HEPA Filtration Expect to Operate Any of the Models for Extended Run Times – without Suction Drop AND without Overheating the Motor(s)
While specifically built for extracting volumes of crystalline silica dust, Dust Director® Vacuums are now being used in all Industries, Professions & Applications whenever a Quality, High Performance Wet/Dry Vacuum Cleaner is required. With electronics being used in just about everything today, in case you’re forgetting – Dust & Electronics DO NOT MIX. Likewise, Dust Director® Vacuum Cleaners Do No Use Any Electronics to Prevent Filter Blinding. 100% of the Motors’ Power is Dedication for Suction – It is not shared with Circuit Boards, or any other Electronic Component or Module that Reduces and Even Stops Suction to Clean the Filters.
Using Common Sense Filter Technology, Like-New Suction is Provided Every Time with a Dust Director®Vacuum
– Unlike other vacuum cleaners that re-use the same dirty filter again and again and again . . .
Airtight Sealed Collection Tanks - Dust Director® Vacuums ensure you against Dust Exhaust or Leakage. By preventing even the slightest loss or escape of dust, suction power also increases. Each Dust Director ® Vacuum has a poured in-place urethane gasket beneath its motor head to create a positive airtight seal between the motor head and its collection tank (picture, right). Commonly purchased shop vacuums and even higher priced dust extractors use foam or nothing at all. By providing this seal, besides assuring you against dust exhaust into your work area, the positive seal is what helps creates our higher suction yields so that motors that draw less amps can be used - simply because no air (or dust) is being lost! AIRFlow HEPA Filtration – Non-Blinding Filtration Maintains the Powerful Suction Performance. Expect to replace the vacuum’s HEPA Cartridge once a year! With AIRFlow HEPA Filtration you can Impressively Collect any type of debris – stones, metals, abrasives, sharp objects, bullet shells, mastics, grease, creosote, dry powders, flours, food, moist debris, etc. Everything & Anything is completely contained in the Clean Extreme Filter Bag (picture, left). Expect to vacuum large volumes of anything and have it accumulate - TO THE TANK’S INLET PORT - without incurring suction drop, damaging the HEPA filter or without the filter bag bursting inside the tank. Everything is Kept Clean: The inside of the tank, outside of the bag, the HEPA Cartridge Filter – Everything is Kept Clean & Operating Efficiency. Clean Extreme Filter Bags ensure that the motors operate efficiently and DO NOT OVERHEAT by providing clean and non-stop airflow. BONUS: Handling & Disposal of the contained debris is Clean, Safe and Without a Mess. C-JET Filtration (picture, right) – Fully Automatic Self-Cleaning Compressed Air Filter Cleaning System. Extract Even Larger Volumes of UltraFine Dry Powders Without Incurring Suction Drop. Without operator intervention, the cartridge filter(s) are constantly & automatically kept clean - from the inside out - with blasts of compressed air - of Jet Blast Force. No filter bags to replace, buttons or shakers to push, or expensive electronic switches, sensors or circuit boards to break. Using Common Sense Filter Technology - Dust Director® C-JET Filtration the Maintains the Motors’ Powerful Suction to Keep Up To your High Level of Productivity ~ Guaranteed.
Flutter Filter (left) – If you prefer not to use the Clean Extreme Filter Bags, the Flutter Filter is a drop-in filter that provides sustained suction and collection yields without using the Clean Extreme Filter Bags. As soon as you turn on the vacuum the spiraling & cyclonic turbulence in the collection tank puts the Flutter Filter in motion - naturally Fluttering, Shaking & Knocking Itself about without the use of electronics. Constantly in flutter motion, dry debris is kept from caking its surface which causes suction drop.
Power Station (right) - Placed between the vacuum’s collection tank and motor head. Installed, 1/3 of the motor head and the complete HEPA cartridge filter are now removed from the collection tank and from direct contact from incoming debris. With a Power Station installed, collection yields, productivity and motor performance all increase by 33% ! With the increase in capacity of a single Clean Extreme Filter Bag, replacement filter bag consumption is reduced by 33%!
DD1000 ~ 1-Motor 2-Stage, 1000 Watts. # # # # # #
Lightweight, Powerful, Compact. The DD1000 will handle concrete dust being created by a 12" Diamond Blade! A+ to use with the 12" Dust Director® Dustless Cut-Off Saw. 10 Gallon polypropylene tank resists cracking, denting and rusting Equipped with: 2" Inlet Port, 1.5" x 15' hose, 2" ID smooth vinyl hose cuff, AIRFlow HEPA Filtration and (3) Clean Extreme Filter Bags. Increase run time & airflow by installing a PS-300 Power Station & collet 40 lbs of Dust. Sound level / Dimensions: 80 dB / 12" x 27", 15 lbs. Power: 110 V, 1000 Watt, 8.5 Amp, 140 CFM, 93" H20, 10 Gal Poly Tank, 30 lb. Dust Yield. DD1000 Optional 2" x 25' Hose, Flutter Filter & Power Station all available. $ 390.00
DD1200 ~ 1-Motor 2-Stage 1200 Watts # # # # #
Powerful 2-Stage Heavy-Duty Industrial 1-Motor Vacuum 200 More Watts than the DD1000 Vacuum. Equipped with: 2" Inlet Port, 1.5" x 15' hose, 2" ID smooth vinyl hose cuff, AIRFlow HEPA Filtration and (3) Clean Extreme Filter Bags Sound level / Dimensions: 72.7 dB, 12" / 14 x 29", 28 lbs. Power: 110V, 1200 Watts, 10.0 Amp, 150 CFM, 97" H20, 12 Gal HD Poly Tank, 40 lb Dust Yield. Optional 2" x 25' Hose, Flutter Filter & Power Station all available. Increase run time & airflow by colleting 50 lbs of Silica Dust when a PS-300 Power Station is installed.
DD1200 $ 590.00
DD1500 ~ 1-Motor 3-Stage 1500 Watts #
# # # # # # # # #
DD1500 $ 690.00 Identical to the DD1200 but with a 3-Stage Motor for increased waterlift or suction force Recommended for vacuuming or lifting heavier weights such as piles of dirt, rock, stones, sand, heavy sludge . . . to wanting to reach 30+ feet while keeping the vacuum on the ground. Provides two (2) motor suction power in a compact, 1-motor vacuum Guaranteed to be the most powerful 1-motor vacuum you ever used A+ for use in industry, manufacturing, special applications, or use as an extremely powerful general purpose vacuum. Same rugged 12 gallon polypropylene tank as the DD1200 to resist denting, staining, rusting, etc. Equipped with: 2" Inlet Port, 1-1/2" x 12' hose, 2" ID smooth vinyl hose cuff, AIRFlow HEPA Filtration and (3) Clean Extreme Filter Bags Sound level / Dimensions: 80 dB, 12" / 14 x 29", 28 lbs. Power: 110 V, 1500 Watts, 12.5 Amp, 140 CFM, 146" H20, 12 Gal HD Poly Tank, 40 lbs. Dust Yield. With 2" x 12' hose, Model DD1500-2 @ $740.00 Optional 2" x 25' Hose, Flutter Filter & Power Station all available. Increase run time & airflow by colleting 50 lbs of Silica Dust Powder when a PS-300Power Station is installed.
DD2400 110 Volt 2400 Watts & DD3900 240 Volt 3900 Watts # # # # # #
#
# #
#
DD2400 110 Volt
Rugged 24 Gallon HD Polyethylene Tank resists cracking, denting and rusting $1,590.00 Compact vacuum with quiet motors and independent on/off motor switches Only use two motors and still be impressed ~ Guaranteed DD3900 240 Volt HD compact vacuum with A+ Durability, Maneuverability – A+ Size for use on scaffold $1,590.00 If only two motors are used only use two motors and still be impressed ~ Guaranteed Silica Dust Applications (2): Handles two Dust Control Angle Grinders. Install the Power Station and two (2) can grind brick mortar joints all day without having to empty the tank! Handles a 20" Floor Grinder. Equipped with: 2" Inlet Port, 2" x 12' hose, 2" ID smooth vinyl hose cuff, AIRFlow HEPA Filtration complete (3) Clean Extreme Filter Bags (3) Sound level / Dimensions: 78 dB, 19.5" x 17 x 38", 50 lbs. #DD2400 110V - 800Watt Motors x 3, 6.5 Amps x 3, 318 CFM, 83" H20, 150 lb. Dust Yield #DD3900 240V - 1300W Motors x 3, 5.8 Amps x 3, 447 CFM, 97" H20, 150 lb. Dust Yield. The DD3900 is easily 30% More Powerful than the DD2400 Machine. Optional 2" x 25' Hose, Flutter Filter & Power Station are all available. Increase run time & airflow by colleting 190 lbs of Silica Dust when a PS-400 Power Station is installed.
Shown with optional 30" dust floor sweep.
AB2400 ~ 3-Motor Chimney Sweep Air Borne Dust Extractor. # # # #
#
Same features as the above DD2400 Vacuum but with a 4" Inlet Port for increased CFM AB-3 Specifically designed for the Chimney Sweep Profession for Fireplace & Air Duct Cleaning. $1,900.00 If only a 15 Amp Residential Circuit is available, only use 2 motors and still be impressed. Equipped with: 4" Inlet Port, 4" x 8' hose for air borne dust, 2" x 12' hose for heavy debris or dust pickup, AIRFlow HEPA Filtration complete with (3) Clean Extreme Filter Bags AND the Flutter Filter. Power: 110 Volt, 800 Watt Motors x 3, 6.5 Amps x 3, 407 CFM, 65" H20, 150 lb. Dust Yield Increase run time & airflow by colleting 190 lbs of Silica Dust when a PS-400 Power Station is installed.
HP1700 High Performance Turbine 1-Motor 110 Volt 1700 Watts # #
#
#
Identical to the above 24 gallon tank models but with increased Static Suction Lift HP1700 Applications: High performance general purpose vacuum for extracting dry powers and general debris $1,590.00 but specifically designed for rather extreme functions such as: > Lifting heavier weighted debris such as tons of dirt, sand, rock, stone, glass, iron, etc. from 12" x 10' holes > Reaching 50+ foot heights while keeping the vacuum on the ground > Extraction Heavy Sludge, Slurry, Grease, etc. from pits or high above. Completely Assembled to Handle both Dry & Wet Applications - 2" Inlet Port, 2" x 25' HD Crushproof hose, 2" ID smooth vinyl hose cuff, Power Station, AIRFlow HEPA Filtration, (3) Clean Extreme Filter Bags, Wet Filter with Float, and a Flutter Filter. Sound level / Dimensions: 72.7 dB, 19.5" x 17 x 50", 58 lbs. Power: 110 V, 1700 Watts, 15.4 Amp, 110 CFM, 172" H20, 24 Gal HD Poly Tank, 200 lbs. Dust Yield.
Barrel Vacuums 2-Motor 110 Volt 2000 Watts Dry & Wet Extraction # # # #
Cyclone Drum Adaptor - Simply laid on top of a standard 55 gallon drum > Rugged steel construction and includes an internal cyclone. Each 1000 Watt Motor has its own on/off switch. Equipped with: 2" Inlet Port, 2" x 12' HD Crushproof Hose, Nozzle Kit with Narrow Crevice Tool & 16" Floor Sweep (brush or squeegee) on wheels Power & Filtration: Dry Model: BV-D2000 - 110 Volt, 1000 watts x 2, 265 Net CFM, 97" H20 with HEPA Cartridge Filter & Flutter Filter for general debris extraction (not recommend just to vacuum dry powders). Wet Model: BV-S2000 - 110 Volt, 1000 watts x 2, 195 CFM, 126" H20, perforated Float Cage for Wet Pickup and Slurry Extraction.
BV-D2000 Dry Filtration $890.00
BV-S2000 Wet Filtration $890.00
C-Jet Blast Vacuums - 110 & 240 Volt - For Dry Extraction Fully Automatic Self-Cleaning Air C-Jet Blast Filtration. Extract even larger amounts of dry powder to general debris without incurring suction drop. Without operator invention the vacuum’s cartridge filters are constantly and automatically being cleaned - from the inside out - with pneumatic driven blast of airstreams - of Jet Blast Force - every 2 minutes to prevent the anti-static or dust repellant pleated filters from prematurely blinding. With C-Jet Blast Filtration there are no filter bags to replace, buttons or shakers to push, or expensive electronic switches, sensors or circuit boards to replace. The built-in compressor module - pneumatically operated, independent from the suction motors, and housed in its own module - assures you of maintenance free performance as it constantly regenerates its storage tank to release powerful blasts of air that efficiently and efficiently maintains the vacuum’s incredible suction. 220 Volt Models - 3-Motor, 15.3 Net Amp, Single Phase, 340 CFM, 90" H20 w/ 2" x 25' Hose. With Barrell Head, #CJET240-55 (picture, right). Price: $5,800.00 Drum fills to 3/4 capacity with over 400 lbs. of concrete dust. With 20 Gallon Stainless Steel Split Tank – Price: $6,500.00.
C-JET19S - 110 Volt $1,790.00
C-JET240-55 - 240 Volt $5,800.00
110 Volt Models - 1-Motor, 10.5 Amp, 170 CFM, 93" H20 w/ 2" x 25' Hose. 2 Tank Options: With 20 Gallon Steel, #CJET19S (picture - far right) Price: $1,790.00. Collect 30 lbs. of concrete dust. When used with the Power Station collect 120 pounds! With 20 Gallon Stainless Steel Split Tank – Price: $2,500.00
20 Gal Stainless Steel Split Tank Easy removal, handling and disposal of debris from the bottom detachable and roll-away collection tank.
Wet Recovery Vacuums 2-Motor 2000 Watts Two (2) models each with the same 2-Motor Suction Power for fast extraction of liquids - leaving floors dry and ready for immediate traffic. Each model includes the integrated sump pump, rear discharge outlet, internal piping, quickdisconnects for 3/4" garden hose and 1-1/4" hose (hoses not included), 2" x 10' extraction hose, HD nozzle kit w/ 16" squeegee. 4.5 amp sump pump that automatic discharges liquids (or deactivate the pump and discharge as needed). Internal float ensures that the vacuum cannot overfill. The #SV-2000 is a Slurry Recovery Vacuum as it contains any solids or fines within the extracted slurry while allowing “filtered” water or liquids to pass through. As a water recycling unit, the tank may be filled with 10 to 12 gallons of clean water and used as a self-contained water supply as you recover, filter and reuse the water continuously while containing any solids or fines within the slurry. The precise micron size of the Slurry Containment Bag ensures optimum filtration efficiency (or containment of the fines) while maintaining operations and filtered water flow for high levels of productivity. The external 30" drain pipe on the rear of the tank (both models) provides for easy cleaning and maintenance. The optional front mount 30" Floor Squeegee is highly effective and a recommended attachment. # # #
Sound level / Dimensions: 78 dB, 19.5" x 17 x 38", 57 lbs. Power: 110 V, 1000 Watts x 2, 8.5 Amp x 2, 195 CFM, 126" H20, 24 Gal HD Poly Tank. Model S-2000 is identical to the SV-2000 Slurry Vacuum but without the Slurry Filter Collection Separator Plate.
SV-2000 $1,600.00
S-2000 $1,180.00
Shown with optional 30" dual Bag & blade squeegee.
Pre-Separators - 2 Models Placed in front of the vacuum to collect 95% of the extracted debris. With the dust and debris separated and contained in the pre-separator, the vacuum’s filters are free to operate without clogging. Collection yields, productivity, vacuum performance all increase when vacuuming larger volumes of powders. Pre-separators are highly recommended when your vacuum's filter's are prematurely blinding due to larger quantities of dust being extracted, these situation occur when grinding softer concretes, terrazzo or when grinding with coarse grit diamonds.
Split-Tank Pre-Separator # # # # # # # # #
Rugged Stainless Steel Split-Tanks, 19 Gallon Capacity Tank with Cyclonic Funnel beneath top tank Vacuum Equalizer (VEK) included for lining the bottom tank with a standard plastic bag, providing for easier handling, clean-up and disposal Cyclonic Funnel creates a powerful downward force that keeps the extracted powders in the bottom tank and from cycling up to the airstream to the vacuum’s filters 2" cast aluminum inlet port Vacuum’s filters are kept cleaner, collection yields easily double Testimonial: “When used with the DC-3 Vacuum, one Clean Extreme Filter Bag is used per 4 concrete grinding projects”. Tipping Cart Easy emptying with debris completely contained in a plastic bag Dimensions / Weight: 23" x 25" x 48", 25 lbs. Includes: 2" x 12' HD Hose (Separator to grinder), 2" x 4' HD Hose (separator to vacuum), (2) 2" ID smooth vinyl hose cuffs, (2) inlet cuffs, Cyclonic Funnel, VEK.
PS-19 $800.00
Easy removal of the collected dust from the bottom tank of the PS-19 Separator with its convenient Tip’n Pour Cart.
55 Gallon Drum Adaptor Pre-Separator # # # # #
Rugged Steel Construction with Cyclone Adaptor Same features as the above PS-19 Separator but for use on 55 gallon drums (easily doubling collection yields) Cyclonic Funnel installed beneath the lid of the separator increases the downward spiraling force of the cyclone to keep powders on the bottom of the tank and from flowing directly with the airstream to the vacuum's filters Inlet Port Size: 2" cast aluminum. Dimensions / Weight: 27" x 27" x 16", 40 lbs. Includes: 2" x 12' HD Hose (Separator to grinder), 2" x 4' HD Hose (separator to vacuum), (2) 2" ID smooth vinyl hose cuffs, (2) inlet cuffs.
PS-55 $780.00
Power Stations - The best and maybe the most important attachment for any Dust Director® Dust Control Vacuum: 1, 2 or 3-Motor. INSTALLATION: A Power Station is simply installed or placed between the vacuum's tank & motor head. Installed, collection yields increase by 33%! Additional benefits are as follows: # # #
By being able to collect 33% more - in the same Clean Extreme Filter Bag - bag consumption or filter bag replacement cost drops by 33%! - - - - > - - - - > - - - - > - - - -> - - - -> Increased Productivity - Without having to stop nearly as often to clean the filters or to empty the tank productivity also increases by 33%! With space always a concern - especially on scaffold - you are able to grind or cut longer without using a larger vacuum cleaners. For increase savings and collection capacities, use the same vacuum but just add a Power Station and increase collection yields 33% !
How does it work? Besides the use of a collection tank to hold the extracted debris, the tank on a vacuum cleaner also houses 1/3 of the vacuum's motor head and 100% of its cartridge filter. With a Power Station installed, both the motor head and the cartridge filter are now completely out-of-the tank and operating in their own “protected” air space.
Long Motor & Vacuum Life: With the cartridge filter 100% removed from the collection tank and operating efficiently in its own air space, a vacuum’s motor(s) is able to work longer, more efficiency and cooler.
Increase Productivity: After using a Dust Director® Vacuum and seeing how powerful the suction is maintained, customers often say that the tank still fills too fast (even though the filter bag has completed filled the tank.) But with a Power Station installed, you’ll work longer by adding another 33% to the same filter bag. Likewise, besides increasing productivity your bag consumption and replacement cost drops by 33%! POWER STATION PRICING - Two (2) Sizes: #PS-300 Fits Dust Director 1-Motor Vacuums Dimensions of Power Station, 12"(w) x 9.64"(h) Price: $ 140.00
#PS-400 Fits Dust Director 2 & 3-Motor Vacuums Dimensions of Power Station, 16"(w) x 11.42"(h) Price: $190.00
VACUUM CLEANER REPLACEMENT FILTERS & ACCESSORIES FLUTTER FILTERS - As soon as you turn on the vacuum cleaner the Flutter Filter begins to shake and flutter naturally using the spiraling
Price
turbulence inside the tank. Without using electronics or manual filter shaking, the constant self-fluttering action keeps dry powders from accumulating and clogging its surface. 16" Flutter Filter Insert Basket. High Efficiency. Ready to install, totally assembled. Fits Dust Director 2 and 3-Motor Vacuums, HP model (1-motor), Barrel Heads & PS-400 Power Station . . . . . . . . . . . . . #FF-400
$ 120.00
12" - 14" Flutter Filter Insert Basket - High Efficiency. Ready to install, totally assembled. Fits all Dust Director 10 and 12 gallon 1-Motor Vacuums & PS-300 Power Station . . . . . . . . . . . . . . . . . . . . . . . #FF-300
$ 120.00
CLEAN EXTREME FILTER COLLECTION BAGS - High Efficiency Filter Bag, fills completely in the vacuum tank - to its inlet port - without bursting, without clogging and without tearing while being handled during removal from the tank. A+ for collecting dry powders to damp debris. Small 2-1/2" Collar - Fits 7 to 16 gallon wet/dry vacuums with a 2-1/2" inlet port. Fits Dust Director 1-Motor Vacuums. HL500-25 Price Per Bag:
FT501-25
20 / Box, $11.55 / bag
50 / Case, $10.00 / bag
Large 2-1/2" Collar - Fits 17 to 30 gallon wet/dry vacuums with a 2-1/2" inlet port. Fits Dust Director Vacuums: DC-2S, DC2, DC-3, HP. Price Per Bag:
HL501-40
2 / Pk, $13.85 / bag
2 / Pk, $21.00 / bag
20 / Box, $19.00 / bag
50 / Case, $17.00 / bag
Large 2-1/2" Collar - Fits 17 to 30 gallon wet/dry vacuums with a 4" inlet port. High efficiency filter bag. Fits Dust Director Vacuums: AB-3. Price Per Bag:
2 / Pk, $21.00 / bag
20 / Box, $18.70 / bag
50 / Case, $15.90 / bag
BLUE SLURRY FILTER COLLECTION BAGS - High Efficiency Filter Bag with rubber gasket. Blue Slurry Bags are completely re-useable and washable. Provides large enough collection yield of wet debris while allow efficient water to flow through the bag for un-interruptive or productive operations. SB-24
Blue Slurry Basket - Fits 24 gallon slurry vacuum tank (Slurry Vacuum Model, SV-2000). Re-useable and washable, equipped with 2-1/2" rubber gasket collar. Used to contain the SW-24 White Slurry “Debris Collection Bag” . . . . . . . . . . . . . . . . . . $88.00 ea.
SW-24
White Slurry Collection Bag - High Efficiency Slurry Containment Filter Bag. Fits inside the Blue Slurry Basket. Completely Re-useable and washable, equipped with HD 2-1/2" rubber gasket collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $88.00 ea.
CARTRIDGE FILTERS HEPA Cartridge Filter, Non-Certified, rated @ 99.97% Efficient @ 0.3 Microns. This filter is included with each Dust Director Series Vacuum.
$ 75.00
Certified HEPA Cartridge Filter, rated @ 99.97% Efficient @ 0.3 Microns. Manufactured and individually tested and certified with serial number to in EPA and OSHA HEPA standards. Fits all Dust Director Vacuums.
$ 120.00
15933K
Non-Certified HEPA Cartridge Filter with Dust Release & Water Shredding PTFE Membrane - rated @ 99.97% Efficient @ 0.3 Microns. For both wet and dry applications. Exclusive non-stick surface increases filter applications, versatility and vacuum performance while significantly providing a longer lasting filter. Fits all Dust Director Vacuums.
$ 85.00
15854K
Identical to the above 19533K Non-Certified HEPA Cartridge Filter w/ Dust Release & Water Shredding Membrane - Made for the Dust Director CJET Vacuums.
$ 160.00
25HOSE
2" x 25' Hose - Lightweight, Flexible, Smooth Bore Interior - w/ Hose Cuffs (2" Hard Plastic for vacuum’s 2" inlet port & (3) additional soft vinyl cuffs)
$ 140.00
25C-HOSE
2" x 25' Hose - Crush Proof, Heat-Proof, Smooth Bore Interior - w/ Hose Cuffs (2" Hard Plastic for vacuum’s 2" inlet port & (3) additional soft vinyl cuffs)
$ 190.00
2 HD Nozzle Kit - For use with 2" Hoses. Includes: 16" Floor Brush on wheels, 16" Squeegee on Wheels, Wands (s), Brush, Narrow Crevice Tool, Adaptor, Hose Cuffs (2).
$ 110.00
T80122
15933HK
HOSES.
NOZZLE KITS S79000
