Transcript
For CD/MP3 program 1.Put in a MP3/CD format disc. 2. There is Edit Mode at the right side of the list. Press enter to choose Edit Mode, then move the LEFT button to enter song selection, press ENTER to confirm. Then move the cursor to Add to Program at the right side, press ENTER to confirm. Move the cursor and enter Program View to choose program playing. Note: If songs is being played while programming, press STOP button to stop current playing before you choose program playing. 3.To clear the program, it must be in STOP status. After choosing the song needed to clear, move the cursor to Clear Program. Press ENTER to confirm. Note: Ensure you have chosen Edit Mode before clearing program. 4. There are 3 Repeat modes and 3 Mode states at the right side. Repeat Single is to repeat single track. Repeat Folder is to repeat tracks in the whole folder. Repeat Off is to cancel repeat. Mode normal is to play normally. Shuffle on is to play randomly. Music intro is to play the prelude only. Notes: To play randomly, preset repeat state as “Repeat: off” at the right side, mode state as “Shuffle on”. Press NEXT from the remote control to play without sequence. For DVD Program Press this button and the screen will display info window, press digits button to input the program number what you want,when finished,wove the cursor to select the PLAY logo at this time the unit will start program playback and the screen will display PROGRAM logo.
7.
7
7
7 720P
7
7
7
7
7 7 7
7.3.7 Center spkr delay CVBS: Composite Video. Set the video output to interlacing component output. RGB: Set the video output to SCART output.
This function is use for set center speaker output later than front speaker, set to 0.3m/0.6m/1m/1.4m/1.7m to select delay time, for example: set to 0.3m center speaker output will be 0.3 milliseconds later than front speaker output, if set to NO DELAY, center speaker and front speaker will be output at the same time.
7.3.8 Surr spkr delay
This function is use for set surround speaker output later than front speaker, set to 1m/2m/3m/4m/5.1m to select delay time, for example: set to 1m surround speaker output will be 1 milliseconds later than front speaker output, if set to NO DELAY, surround speaker and front speaker will be output at the same time.
7.3.9 Digital output
Select OFF to turn off digital output, select PCM enable audio output decoded by decoder chip, select RAW to enable audio will output without been decoded by decorder chip.
7.3.10 Night Mode
This listening mode is most suitable at night for softest audio output and least disturbance.
7.3.11 Down Sampling
Down sampling: Down samling enable the user less sampling rate. A higher sampling frequency/rate enables user get better audio quality. On: enable the Down Sampling this operation will set down Audio Sanmpling frequency. Off: disable the Down Sampling.
7.3.1 Bass management
Aselect OFF or ON to turn off or turn on 5.1 channel output.
7.3.2 Front speakers
Select LARGE or SMALL to set front speaker output voice to large or small.
7.3.3 Center speaker
Select LARGE or SMALL to set center speaker output voice to large or small, select NONE to turn off center speaker output
7.3.4 Surround speaker
Select LARGE or SMALL to select surround speaker output voice to large or small, select NONE to turn off surround speaker output
7.3.5 Subwoofer
Select NONE to turn off subwoofer output, select PRESENT to turn on subwoofer output.
7.3.6 Test tone
This is use for test 5.1 channel, select LEFT / RIGHT / CENTER / LEFT SURR / RIGHT SURR / SUBWOOFER you can test each of them separately, select OFF to turn off test function.
8888
