Transcript
DVI-26xx-FO Series DisplayPort v1.2 Fiber Optic Cables
FEATURES • Supports resolutions up to 4096x2160 @ 60Hz • Supports digital bit rates up to 21.6 Gbps. • Available in cable lengths up to 40 meters (130 ft.) • Optical fiber transmission is immune to environmental signal noise • Low RFI / EMI profile for sensitive applications • Supports bidirectional communications over AUX channel for EDID, HDCP, Link Training, etc. • Powered by the DisplayPort source device • Rugged yet pliable construction
Superior Performance – Designed to overcome the limitations of sending digital DisplayPort signals over copper wires, DVIGear’s fiber optic cables provide unmatched signal fidelity and transparency at resolutions up to 4096x2160 @ 60Hz with lengths up to 40 meters (130 ft.). These cables utilize high-speed electro-optical converters integrated within the cable. The transmitter module converts the electrical signals from a DisplayPort source device to optical pulses that are transported over the fiber optic cable to the receiver. The receiver module converts the optical pulses back to the original DisplayPort signal for display on a monitor or large screen projector. Rugged Construction – The cable material utilizes an innovative hybrid design that includes 4x glass optical fibers and 6x copper wires. This approach provides a high degree of ruggedness and flexibility. The DisplayPort connectors employ a locking mechanism to ensure a secure connection. The transmitter and receiver modules are shielded in high‑impact, metal alloy enclosures that provide maximum strength and durability. Advanced Design – These cables are designed for use in mission critical applications where image quality and dependability are paramount. The video signals are transmitted over four optical fibers, which make them immune to interference from environmental noise sources. The optical transmission path provides a very low RFI / EMI profile, which allows the cables to be installed in sensitive applications with strict security requirements. These cables draw power from the connected DisplayPort source, eliminating the need for an external power supply. These features make these cables ideally suited for critical display applications that require long DisplayPort cable runs with ultra-high resolution and flawless image quality.
DisplayPort Connector
Transmitter Module
DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 •
[email protected] • www.dvigear.com
DVI-26xx-FO Series DisplayPort v1.2 Fiber Optic Cables SPECIFICATIONS Performance Compliance Maximum Video Bit Rate Supported Color Depth Supported Resolutions Digital Audio Support AUX Channel Bandwidth AUX Channel Support Connections DP Input / DP Output Power Input Optical Optical Technology Optical Wavelength Optical Transmitter Optical Receiver Cable Fiber Cable Type Standard Lengths (meters) Standard Lengths (feet) Maximum Cable Length Cable Jacket Cable Outside Diameter Mechanical - Tx and Rx Modules Construction Dimensions (L x W x H) Mechanical - Cable Product Weight Maximum Tensile Load Minimum Bend Radius Crush Resistance Environmental Operating Temperature Storage Temperature Operating / Storage Humidity Power Requirements Power Source Power Consumption Regulatory Approvals Fiber Optic Cable Warranty Limited Warranty Model Number DVI-26xx-FO Accessories Included
DisplayPort v1.2a, HDCP 5.40 Gbps. per Channel / 21.6 Gbps. Aggregate Up to 16-bit Up to 4096x2160 @ 60Hz with 8-bit color 8x channels of 24-bit 192 kHz uncompressed PCM audio 720 Mbps. Supports bidirectional communications over AUX channel for EDID, HDCP, Link Training, etc. 20-pin DisplayPort Male Connectors with locking mechanism None 4x Discrete Optical Channels 850 nm Tx Module: 4x 850nm Multi-Mode VCSEL, Class 1 Laser Product Rx Module: 4x GaAs PIN Photo Diodes 4x 50/125μ Multi-Mode Glass Optical Fibers 10, 15, 20, 25, 30, 35, 40 32.8, 49.2, 65.6, 82.0, 98.4, 114.8, 131.2 131.2 ft. / 40 meters FR, PVC, Black 7.4 mm ± 0.20mm High-impact metal alloy enclosures with integrated 12" DP copper cables 4.5" x 1.0" x 0.9" (114.0 mm x 24.8 mm x 21.7 mm) Varies by length Short Term: 245 N Short Term: 75 mm
Long Term: 125 mm
Short Term: 490 N / 50 mm section +32° to +122° F (0° to +50° C) -4° to +158° F (-20° to +70° C) 10% to 80% (non-condensing) Powered from DisplayPort source device < 1 watt typical FCC, CE, RoHS 3 Years DisplayPort v1.2 Fiber Optic Cable ( xx = length in meters )
1x Quick Start Guide
Optional Accessories DisplayPort Female to Mini-DisplayPort Male Adapter Cable (Model No. DVI-8610a) 2
DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 •
[email protected] • www.dvigear.com
