Transcript
DVP-4060/8060/8120
VIDEO RECORDER & MIXING AMPLIFIER DVP-8120
VIDEO RECORDER & MIXING AMPLIFIER
FM TUNER & MP3
CH1 2 CH3 4 CH5 6 CH7 8 LCD ON/ OFF
QUAD
0
0
-10 +10 BASS
-10 +10 TREBLE
ZONE
SIREN
1
2
3
4
5
6
7
8
SIG
CLIP PROT
ALL
CHIME
EM
PHANTOM
MASTER
POWER
POWER HDD
MOUSE
MENU MIN MAX MIC1
Better Communication
MIN MAX MIC2
MIN MAX AUX1
MIN MAX AUX2/MP3
MIN
MAX
ON
OFF
WARNING! Never dissemble or take apart device! In case service is needed, contact authorized repair person only.
In case smoke or unusual noise is found, unplug immediately and contact authorized repair person.
Make sure ventilation hole is clear from any external metal piece (e.g. coin) or flammable object (e.g. paper or matchstick)
In case using DC power, make sure to use correct power and direction of batteries.
CAUTION Fix plug tight into outlet. Unstable plug might cause a fire.
If power cable needs to be cut and re-connected, make sure power is off and device is unplugged. It can be very dangerous.
When unplugging, never pull string. Make sure to hold plug. Inner cable might cut inside covering.
In case AC switch breaker is needed, be cautions with electricity.
In case DC power is used, make sure with power voltage and current at every time.
Make sure device is away from heat or direct rays of the sun. It might cause a fire.
For installation, use only provided screws and bolts to fix firmly.
DC
Clean device with only DRY cloth.
Don’t drop any object onto the device. Keep it away from magnets. This might cause damage to the device.
Device should be used only within certified distance, by provided cables only. This helps performance.
Warrantee terms and conditions vary by country and may not be the same for all products. For specific warranty information about warranty or service, contact Pascom co.,ltd directly or authorized distributor for your country or region.
DVR & MIXING AMPLIFIER
THANKS FOR BUYING PASCOM’S PRODUCT. ■ ABOUT OPERATION ① Please confirm the connection status of speaker line before input the power. ② Turn on the Power. ③ Confirm to light up of wireless mic display window and power light. ④ Control the output statu of speaker by volume tool of wireless mic and MP3 Player etc.
■ FEATURE ① 4CH , 8CH Digital Video Recorder mount. - Can use to CCTV surveillance and record functiion. ② UHF 900MHz Wireless Mic Mount. ③ SD CARD , USB HOST & FM RADIO ④ Connect with External Merchinary ⑤ 60W/120W(High ImPedence) , 4ohm , 8ohm Speaker Output. 60W/120W(High ImPedence) , 4ohm , 8ohm output termihal & D-CLASS AMP. •
■ ACCESSORY - Wireless Hand Mic 1set , Battery (AA size 2pcs , AAA size) , W/L receive Antenna 2pcs , FM Antenna 1pcs , Remote Controller (MP3 player 1pc , DVR 1pc) , Wired Mouse 1pc , DC POWER 4 Distribution cable 1pc(DVP-4060/8060W) , MANUAL 2pcs.
1. DVP - Series
DVR & MIXING AMPLIFIER
FUNCTION OF FRONT PANNEL
① DVP-8120
VIDEO RECORDER & MIXING AMPLIFIER
FM TUNER & MP3
0
0
-10 +10 BASS CH1 2 CH3 4 CH5 6 CH7 8 LCD ON/ OFF
QUAD
⑫
ZONE
SIREN
1
2
3
4
5
6
7
8
SIG
ALL
EM
MASTER
⑪ ⑩
PHANTOM
CHIME
-10 +10 TREBLE
CLIP PROT
⑧
POWER
POWER HDD
MOUSE
MENU MIN MAX MIC1
⑬
③
MIN MAX MIC2
②
MIN MAX AUX1
MIN MAX AUX2/MP3
④ ⑨ ⑤
MIN
MAX
⑥
ON
OFF
⑦
1. MP3 PLAYER & FM TUNER The operator of SD CARD , USB MEMORY ,& MP3 FILE play and FM TUNER. - Refer to page 4. •
2. MIC 1,2 Connect the Balance Type Mic and control the MIC volume. Remark : Use for suitable volume without howling. Use only one input terminal of front terminal or rear terminal. 3. TONE CONTROL The volume that control to MASTER VR OUTPUT SOUND. Can control to BASS(100Hz), TREBLE(10KHz) each ±10dB . 4. AUX 1 Can usel for connect to the STEREO machinery. • Use Front : 3.5” Phone Jack , Rear : STEREO Pin Jack. (Use only one input terminal of front terminal or rear pannel.) Wiring of Phone Jack. - TIP : LEFT, RING : RIGHT, SLEEVE : GND 5. AUX 2/MP3 The Volume is can control the sound of AUX2 and MP3 player. Use 1/4” Phone Jack in Rear pannel. Can sound control by MP3 player and original’s volume. Phone Jack’s wiring.
.
- TIP : LEFT, RING : RIGHT, SLEEVE : GND
DVP - Series .2
DVR & MIXING AMPLIFIER 6. MASTER REGULATOR Main regulator that can control the volume of L and R output. 7. POWER SWITCH Press the switch that supply power and start action. Lamp on the power light and wireless MIC LED. 8. PHANTOM DISPLAY LED Turn on when PHANTOM SWITCH of REAR place “ON” for supply power to condenser mic. 9. CHIME, SIREN BUTTON The switch that chime and siren ring. MIC or AUX sound will exclude when chine or siren ring. 10. EM DISPLAY LAMP Show the emergency situation in case of fire. 11. OUTPUT LEVEL DISPLAY LED
•
Showing LED that lamp’s output place. Use for control the volume within range of CLIP dose not light because sometimes may cause distration of sound. PROTECTION LED Show the Amp’s protection circuit is working. When the LED light , stop using and reusing after catch and solve the cause of overheating , voltage supply abnormality , speaker line abnormality. • 12. ZONE SELECTION SWITCH Can choice the zone which you want to broadcast. 13. DVR SECTION DVR(DIGITAL VIDEO RECORDER)’s operation part.
3. DVP - Series
DVR & MIXING AMPLIFIER FUNCTION OF FRONT PANNEL
* MP3 Player & FM Radio Control. 13
1
12 11
10
2
3
9
4
8
5
7
6
• 1. POWER ON/OFF SWITCH 2. REWIND BUTTON - Choose the previous song of MP3 Player or low level frequancy of radio and press this button 1.5 seconds more, can reduce the• volume. (Can contol the volume level 1~30.) 3. PLAY & PAUSE BUTTON - Can play or temporarily stop in MP3 file is playing. 4. FORWARD BUTTON - Choose the next song of MP3 Player or high level frequancy of radio and press this button 1.5 seconds more, can heughten the volume. (Can contol the volume level 1~30.) 5. FM RADIO / AUX / MP3 BUTTON - Can choose the FM radio , AUX , MP3 function when you press the button each time. lt has no memory card , it is ghoosen the FM / AUX and inclued memory card , it will play MP3 file first. 6. MINI USB INPUT TERMINAL - Connection terminal that saved MP3 file and Play MP3 file by USB cable. 7. USB MEMORY READ - Input the USB Memory Card to this terminal , automatically play the included data. 8. SD CARD MEMORY - Input the SD Memory Card to this terminal , automatically play the included data.
DVP- Series .4
DVR & MIXING AMPLIFIER 9. FM/AUX DISPLAY - Show operating FM / AUX mode. 10. PLAY DISPLAY - Show track and play time in MP3 play or frequancy of Radio in FM raido play. 11. MEMORY DISPLAY - Show USB memory or SD CARD memory of Record Media in MP3 play. 12. PLAY DISPLAY - Showed Playing or Pause state of MP3 play. 13. REMOCON RECEIVER - Receive the IR signal of Remote controller. ※ When the power turn on first, it’ll play of MP3 file automatically of meemory card and have no file , output the radio that before played frequancy. ※ Input the USB or SD CARD inclued MP3 file, it play sequencially.
* MP3 Player Remote Controller 1
2
3
1. POWER ON/OFF SWITCH 2. FM RADIO / AUX / MP3 BUTTON
Mode 5 6
4
- Can choose the FM radio , AUX , MP3 function when you press the button each time. lt has no memory card, it is choosen the FM / AUX and inclued memory card,
7
EQ
VOL-
VOL+
8 9
0
RPT
CLOCK
1
2
3
4
5
6
7
8
9
5. DVP - Series
10
it will play MP3 file first. 3. MUTE BUTTON - Press this button, stop the sound of playing file. Press again, the sound output normally.
11
DVR & MIXING AMPLIFIER 4. PLAY & PAUSE BUTTON 5. REWIND BUTTON - The Previous song or Llow level frequancy of radio choose button 6. FORWARD BUTTON - The Next song or High frequancy of radio choose button 7. EQ BUTTON - Output the setup EQ mode sound when press the button each time. 8. VOIUME CONTROLLER 9. REPEAT BUTTON - Can repeat and play a song or all song in MP3 file play , scan and save the frequency for available broadcasts in FM TUNER MODE. 10. CLOCK DISPLAY BUTTON - Press the button each time , ciock display do “ON/OFF”. Time srtup : Press this button 3 seconds -> into the setting mode -> setup the time by NO.5 and NO.6 button. 11. NUMBER BUTTON - Choose the play file number or saved frequancy of FM TUNER button.
DVP - Series .6
DVR & MIXING AMPLIFIER
FUNCTION OF REAR PANNEL
①
③
⑪
~AC INPUT
FM ANT
MOUSE
USB
DVR POWER ON
DVP-8120 56
OFF
AC 220 V/60Hz, 58 W (T3AL/250 V) AC 230 V/50Hz, 58 W (T3AL/250 V)
VIDEO IN
AC 240 V/50Hz, 58 W (T3AL/250 V)
1 EM
2 OUTPUT CH8
CH7
CH6
CH5 CH4 CH3
7 ALM
IN
12 34 56 78
VIDEO OUT
CAUTION
4Ω
5
AUDIO OUT
S/N
RISK OF ELECTRIC SHOCK DO NOT OPEN
8Ω
3
+12V GND 485B 485A GND NO COM GND
GND
4
6
8 AUDIO IN
INPUT CH2 CH1
AUX2
AUX1
HOT
PHANTOM
L
MIC1/MUTE
NET
1
3
5
7
2
4
6
8
VGA
OFF ON
COM
R MIC2
COM
MIC1
+15VDC
MADE IN KOREA
②
④
⑤ ⑥
⑦
⑧
⑨
⑩
1. POWER INPUT (AC 230V,50Hz) - Please connect after confirm the voltage. In case of cut the FUSE and change, please change to rated capacity fuse. 2. Ground Terminal 3. FM ANTENNA CONNECTION TERMLNAL - Terminal is for receive FM RADIO signal. 4. Speaker Connection Terminal Use it when connect speaker. If connect speaker with over impedence, it make ourput degradation and damage to qmplifier. Please warn to the speaker connection. Each output is CH1~8 : 120W(100V/83.3Ω), 60W(100V/166.7Ω) . 5. FIRE RECIEVER TERMINAL - P type fire emergency reciever. - Whem fire, outpyt the emergency broadcasting after output the emergency siren.
7. DVP - Series
6. AUX 2 INPUT JACK - 1/4 Phone Jack external machinery connection terminal , Use to control input volume by volume controller of MP3 PLAYER in front pannel. Tip : STEREO L, Ring : STEREO R, Sleeve: GND 7. AUX 1 INPUT JACK - Stereo pin jack external machinery connection terminal , Use to control volume by volume controller of AUX 1 in front pannel. 8. MIC CONNECTION JACK 9. PHANTOM POWER SWITCH - Power supply to Condenser Mic switch , supply DC + 15V power to MIC1. Must use to connect blancr type condenser mic and switch “ON”. 10. MIC 1 MUTE LEVEL 11. DVR SECTION DVR’S driving part.
DVP - Series .8
DVR & MIXING AMPLIFIER SPECIFICATION ■ OUTPUT ---------------------------------------- DVP-4060/8060 : 60W(100V, 4Ω, 8Ω) DVP-8120 : 120W(100V, 4 Ω, 8Ω) ■ INPUT SENSITIVITY MIC 1~2 ----------------------------------------------------------------- -60dB AUX 1 -------------------------------------------------------------------- -14dB AUX 2 ------------------------------------------------------------------- -16dB ■ FREQUENCY RESPONSE MIC 1~2 ----------------------------------------------------------- 120Hz ~ 18KHz AUX 1 ------------------------------------------------------------- 60Hz ~ 20KHz AUX 2 ------------------------------------------------------------- 60Hz ~ 12KHz ■ SIGNAL TO NOISE (on WTD 20KHz) MIC ------------------------------------------------------------- Better than 55dB AUX ------------------------------------------------------------- Better than 70dB ■ TOTAL HARMONIC DISTORTIONS MIC ---------------------------------------------------------------- Less than 1% AUX ---------------------------------------------------------------- Less than 1% • ■ POWER --------------------------------------------------------------- AC 230V/50Hz ■ DEMESIONS -------------------------------------------------- 310(W)x222(H)X95(D)mm ■ WEIGHT ----------------------------------------------------------------------- 13Kg
9. DVP - Series
Better Communication
MADE IN KOREA
www.ipascom.com www .ipascom.com
