Dvr-5hd - Snooper Services

Transcript

  DVR-5HD Dual Channel Vehicle Drive Recorder User manual Contents About this Guide��������������������������������������������������������������������������������4 Guide................................................................................4 FCC Statement ���������������������������������������������������������������������������������4 .................................................................................4 WEEE Notice ������������������������������������������������������������������������������������5 ....................................................................................5 CE Regulatory Notice �����������������������������������������������������������������������5 .......................................................................5 Battery Warning ��������������������������������������������������������������������������������5 ................................................................................5 Notes on Installation �������������������������������������������������������������������������6 .........................................................................6 Caution ���������������������������������������������������������������������������������������������7 .............................................................................................7 . 1 Introduction 8 1 Introduction.............................................................................8 1.1 Features 8 1.1 Features..............................................................................8 1.2 Package Contents 8 1.2 Package Contents...............................................................8 1.3 Product Overview 9 1.3 Product Overview................................................................9 1.3.1 Main Body Graphic 9 1.3.1 Main Body Graphic............................................................9 1.3.2 Rear Camera Graphic 10 1.3.2 Rear Camera Graphic 2 Getting Started 11 .......................................................10 2.1 Storage Media 11 2 Getting Started......................................................................11 2.1.1 Insert the Memory Card 11 2.1.2 RemoveMedia...................................................................11 the Memory Card 11 2.1 Storage 2.2 Installing Vehicles 12 2.1.1 Insert the in Memory Card...................................................11 2.2.1 Mount the Device to Windshield 12 2.1.2 Remove the Memory Card...............................................11 2.2.2 Adjust theinDevice 13 2.2 Installing Vehicles..........................................................12 2.2.2.1 Mount Dismount Device 14 2.2.1 thethe Device to Windshield.......................................12 2.2.2.2 Adjust Dismount Bracket 14 2.2.2 the the Device..............................................................13 2.2.3 Mount Rear to the Windshield 15 2.2.2.1 Dismount theCamera Device.........................................................14 2.2.4 Adjust Rear 16 2.2.2.2 Dismount theCamera Bracket.......................................................14 2.2.4.1 Mount RecordRear Rearview 16to the Windshield............................15 2.2.3 Camera 2.2.4.2 Adjust RecordRear inside the Vehicle 17 2.2.4 Camera..........................................................16 2.3 Connecting to Power and Rear Camera 18 2.2.4.1 Record Rearview...............................................................16 2.3.1 Connecting tothe Power 18 2.2.4.2 Record inside Vehicle..................................................17 2.3.2 Rear Camera 19 2.3 Connecting to Power and Rear Camera..........................18 2.4 LED Indicator 21 2.3.1 Connecting to Power.........................................................18 2.5 Powering thetoDevice On / Off 22 2.3.2 Connecting Rear Camera............................................. 19 2.4 LED Indicator.....................................................................21 1 DVR-5HD V1.0 04/17 2.5.2 2.5.1 Auto Power Manual Power On/Off On/Off and Reset......................................22 22 2.5.2 2.5.2.1 Manual Power On.............................................................22 On/Off and Reset 22 2.5.2.1 Manual Power Off 2.5.2.2 On .............................................................22 22 2.5.2.2 Reset 2.5.2.3 Manualthe Power Device Off .............................................................22 22 2.5.2.3 Initial 2.6 ResetSettings....................................................................23 the Device 22 2.6 2.6.1 Initial Set Time Settings zone................................................................... 23 23 2.6.1 2.6.2 Set the Time Date zone / Time..........................................................25 23 2.6.2 Set the Date / Time 25 3 3 Using the the Drive DriveRecorder......................................................26 Recorder 26 3.1 Automatic Record 26 3.1 Automatic Record.............................................................26 3.1.1 Resolution 26 3.1.1 Resolution.........................................................................26 3.1.2 The Recording Screen 27 3.1.2 The Recording Screen...................................................... 27 3.1.3 Emergency Recording 29 3.1.3 Emergency Recording.......................................................29 3.2 Add Speed Point 30 3.3 Picture in Video.................................................................30 3.3 Picture in Video 30 3.4 Driving Safety.....................................................................31 3.4 Driving Safety 31 3.4.1 Speed Limit Alert..............................................................32 3.4.1 Speed Limit Alert 32 3.4.2 Parking Mode...................................................................33 3.4.2 Parking Mode 33 3.4.3 Collision Detection............................................................35 3.4.3 Collision Detection 35 3.4.4 Driver Fatigue Alert............................................................36 3.4.4 Driver Fatigue Alert 36 3.4.5 Headlight Warning............................................................37 3.4.5 Headlight Warning 37 3.4.6 LDWS ...............................................................................38 3.4.6 LDWS 38 3.4.7 FCWS ...............................................................................40 3.4.7 FCWS 40 3.4.8 FCWS ...............................................................................41 3.4.8 FCMD 41 3.5 File Playback....................................................................42 3.5 File Playback 42 3.5.1 Playing Videos...................................................................43 3.5.1 Playing Videos 43 3.5.2 Viewing Pictures................................................................44 3.5.2 Viewing 44 3.5.3 PlaybackPictures Screen..............................................................45 3.5.3 Playback Screen 45 3.6 Deleting Files.....................................................................47 3.6 Deleting Files 47 4 Adjusting the Settings 49 4 Adjusting the Settings...................................................... ....49 4.1 Using the Menu 49 4.1 Using the Menu................................................................49 4.2 Menu Items 50 4.2 Menu Items....................................................................... 50 5 Connecting to Other Devices 55 5.1 Connecting to the Computer 55 2 DVR-5HD V1.0 04/17 5.2 5 Connecting to Other TV..............................................................56 Devices...............................................54 6 Installing the Software.......................................................57 7 5.1 Snooper DVR....................................................................58 Connecting to the Computer............................................54 8 Specifications....................................................................59 5.2 Connecting to TV..............................................................55 6 Installing the Software......................................................56 7 Snooper Player..................................................................57 8 Specifications...................................................................58 9 Service Under Warranty........................................................61 3 DVR-5HD V1.0 04/17 About this Guide The content in this document is for information purpose and is subject to change without prior notice. We have made every effort to ensure that this User Guide is accurate and complete. However, no liability is assumed for any errors or omissions that may have occurred. The manufacturer reserves the right to change the technical specifications without prior notice. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. 4 DVR-5HD V1.0 04/17 WEEE Notice Disposal of Waste Electrical and Electronic Equipment and/ or Battery by users in private households in the European Union This symbol on the product or on the packaging indicates that this cannot be disposed of as a household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery. For WEEE more information about recycling of this equipment and/or battery, please contact your city office, the shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve Battery natural resources and ensure that it is recycled in a manner that protects human health and environment. CE Regulatory Notice The product herewith complies with the requirements of the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU, battery directive 2006/66/EC, the R&TTE Directive 1999/5/EC and the RoHS Directive 2011/65/EC. Battery Warning • • • • • • • Never dismantle, crush, or pierce the battery, Do not expose battery to a high temperature environment. Only replace the battery with a genuine Snooper battery. Keep the battery out of reach of children. Batteries may explode if exposed to naked fire. Never dispose of batteries in a fire. There are no user serviceable parts inside the DVR-5,the battery can only be replaced by an authorised Snooper technical. Disposed of used batteries observing local regulations. 5 DVR-5HD V1.0 04/17 Notes on Installation 1. 2. 3. 4. 5. 6. 7. 8. Please measure the front windshield viewing area, do not restrict the drivers view of the road ahead. Install the device below the rear view mirror (the centre of the front windshield). We recommend that the sky and the land occupied by the screen 50%, fix the car bracket and then adjust the device so that the lane is aligned with the screen. The correct installation enables the device to maximize the accuracy of LDWS. Rear camera should be installed at the central, higher right position of the front windshield to have the best viewing. After installation, make sure the lens must be positioned at the front direction, the lens in the wrong direction will cause the video screen upside down. Make sure that the lens is within the wiping zone of the windscreen wiper to ensure a clear view even when it rains* Do not touch the lens with your fingers. Finger grease residue may be left on the lens and will result in unclear videos or pictures. Clean the lens on a regular basis. Do not install the device on a tinted film window. Doing so may damage the tint film. Do not restrict the drivers view of the road ahead. This product is suitable for light windshield or light colour heatresistant film windows, the video quality will be reduced if the camera(s) are installed on dark tinted windows. Use the products supplied, failure to use the correct power cable will invalidate your warranty. * Do not mount the dash cam in Zone A as this may contravene local traffic laws. RHD LHD 6 DVR-5HD V1.0 04/17 Caution • • • • • • • • Is is not safe for the driver to operate this device while the vehicle is in motion. Adjust the time zone before you use this device. The results of GPS positioning are only for reference, and should not affect the actual driving situation. GPS positioning accuracy may differ depending on weather and geographical restrictions such as high buildings, tunnels, underpasses, or forests. GPS satellite signals cannot pass through solid materials (except glass). Solar reflective glass will also affect the performance of the GPS satellite reception. GPS reception performance on each device may differ. The values displayed in this device, such as speed and position, are for guidance only due to the influence of surrounding environment. This device gets warm when in use; this is normal. Improper use or operation of the product may result in damage of the product or its accessories and this will void the warranty. Before you start using the product, it is assumed that you agree to the above statement. 7 DVR-5HD V1.0 04/17 1 Introduction Thank you for purchasing this advanced drive recorder. This product is specifically designed for real time video recording when driving. 1.1 Features • • • • • • • 2K HD recording videos (2560x1440P@30fps) 3.0” TFT-LCD colour screen Wide-angle dual camera Collision Detection, when a collision is detected, the device will automatically trigger the emergency recording Parking Mode, the system will automatically power on and start recording when the device senses the vibration Multifunction traffic safety reminder Support SDHC class 10 and micro SD memory storage 16GB or above (supports up to 32GB) 1.2 Package Contents The package contains the following items. If any items are missing or damaged contact your dealer immediately. Drive Recorder Rear Camera Bracket Automotive Double-sided Adhesive CD-ROM Micro SD card Car Adapter Micro USB cable for rear camera   8 DVR-5HD V1.0 04/17 1.3 Product Overview 1.3.1 Main Body Graphic Front View 1 2 Side (Left and Right) Views 3 4 5 6 7 10 11 12 Rear View 8 Top View 15 13 14 16 Bottom View 9 Item No. LED Indicator 2 LCD Colour Screen 3 Menu / Back Button ( ) 4 Playback button /up button ( ) Item No. Item 1 / 5 Snapshot / Down Button ( / ) 6 Emergency Recording / Confirm Button ( / 7 Switch Camera Button ( 8 Speaker ) ) 9 Wide Angle Lens 10 Memory Card Slot 11 Microphone 12 Power Switch 13 Power Connector Port 14 HDMI Connector Port 15 Micro USB Connector Port 16 Bracket Socket Note: Please press the button (3~7) according to the diagram notice shown on screen.   9 9 DVR-5HD V1.0 04/17   1.3.2 Rear Camera Graphic Front View Top View Side (Left and Right) Views 1 4 2 Rear View No. 5 3 Item Bottom View No. Item 1 Wide Angle Lens 4 Camera Rotation Shaft 2 Base 5 Base Rotation Shaft 3 Micro USB Connector Port 10 10 DVR-5HD V1.0 04/17 2 Getting Started 2 Getting Started 2.1 Storage Media 2.1 Storage Media 2.1.1 Insert the Memory Card 2.1.1 Insert the Memory Card Insert memory card with the contacts facing forward see the picture Insert memory card with the pins facing forward see the picture as as below: below: Carefully Insert the memory card into the device until the lock can be smoothly slid. The card will protrude in normal use, damage may occur if pressed too hard. 2.1.2 Remove the the Memory CardCard 2.1.2 Remove Memory If the device is powered on, please power off first and wait for the If the device is power on, please power off first and wait for device to switch off completely before removing the the memory card. the device to switch off completely before removing memory Please refer Manual Power On/Off (2.5.2). card. Please refer Manual Power On/Off (2.5.2). Note: 1. Note: Do not remove or insert the memory card when the device is 1. Do not remove or insert memorythe cardmemory when the card. device is turned on. turned on. This maythe damage This may damage the memory card. 2. Support SDHC class 10 and memory storage 16GB or above 2. Support SDHC class 10 and memory storage 16GB or above (support up (support to 32GB). up to 32GB). 3. 3. Please Pleaseformat format the SD micro cards before thesection initial4.2 use see the micro cardsSD before the initial use see Menu items, section 4.2Format. Menu items, Format. 11 11 DVR-5HD V1.0 04/17 2.2 Installing 2.2 Installing 2.2.1 Mount the Device to Windshield 2.2.1 Deviceinto to Windshield 1. Mount Push the the bracket bracket slot on top of device until a click sound is heard. 1. Push the bracket into bracket slot on top of 2. Connect to the vehicle power supply then device untilon a click sound preview is heard.screen and power to enter 2. Connect the field vehicle power supply confirmto the of view. Then cleanthen the surface thepreview windshield with alcohol to power on to of enter screen and confirm the adhesion surface clean. the ensure field ofthat view. Then clean the issurface Please refer to Connecting to Power (2.3.1), of the windshield with alcohol to ensure and Powering the Device On / Off (2.5). that the adhesion surface is clean. Please 3.referRemove the protective on the bottom of to Connecting to layer Power (2.3.1), and the bracket. Powering the Device On / Off (2.5). 3. 4.Remove the the protective layer on theinstall bottom Release lever of the bracket, theof bracket onto the windshield, then lock the the bracket. lever the to complete installation. 4. Release lever ofthe the bracket, install the bracket onto the windshield, then lock the lever to complete the installation. 5. Make sure the bracket is firmly attached onto the windshield. Note: 5. 1. Make sure the bracket is firmly attached onto the windshield. Do not install the device on a film tinted window. Doing so may Note: damage the tint film. 1. Do not install the device on a film tinted window. Doing so may damage 2. This product is suitable for light windshield or light colour heatthe tint film. 2.resistant This product suitable for itlight or light colour if heat-resistant filmiswindows, willwindshield affect video quality installed on filmdark windows, it will affect video quality if installed the dark windows the windows or dark heat-resistant filmonwindows. or dark heat-resistant film windows. 3. 3.Remove theprotective protective the bottom of the bracket. Remove the layerlayer on theon bottom of the bracket.   12 12 DVR-5HD V1.0 04/17 2.2.2 Adjust the Device 2.2.2 Adjust the the knob Device 1. Loosen to swivel the device vertically. 1. Loosen the knob to swivel the device vertically. Knob 2. Loosen the knob to swivel the device horizontally up to 360°. 2. Loosen the knob to swivel the device horizontally up to 360°. Knob 3. Then tighten the knob to make sure the device is securely locked in place. 3. Then tighten the knob to make sure the device is securely locked in place. 13 13 DVR-5HD V1.0 04/17 2.2.2.1 2.2.2.1 Dismount Dismountthe theDevice Device 2.2.2.1 Dismount the Device To remove thethe device, press the lever and slide the camera to the left For press For removing removing the device, press the the lever lever and and slide slide the the camera camera to to to remove device device, as the picture shown. the left to remove device as the picture shown. the left to remove device as the picture shown. 2.2.2.2 2.2.2.2 Dismount Dismountthe theBracket Bracket 2.2.2.2 Dismount the Bracket To dismount the bracket, first release the lever then pull the small tag To dismount bracket, the lever then to thethe vacuum andfirst to release dismount bracket. Torelease dismount the bracket, first release thethe lever then pull pull the the small small tag tag to to release release the the vacuum vacuum and and to to dismount dismount the the bracket. bracket. 14 14 14 DVR-5HD V1.0 04/17 2.2.3 Mount RearCamera Camera tothe theWindshield Windshield 2.2.3 2.2.3 M ountMount Rear Camera to the Windshield Rear to 1. the Remove the white backing paper on the double 1. Remove whitethe backing onpaper the double sticker, attach 1. Remove white paper backing on theside double side sticker, stick it onto the base of rear side sticker, stick it onto the base of rear it onto thecamera, base of rear then press then camera, press doubled side tape press firmly doubled side tape doubledcamera, side tapethen to ensure stick. to ensure firmly stick. to ensure firmly stick. 2. Adjust rear camera as the picture shown: please check base text is in the right direction to ensure the recording screen direction is in right direction before installation. 2. Adjust rear camera as the picture 2. Adjust rear camera as the picture shown: please check base text is in 3.  Connectshown: the supplied 5m base micro please check textUSB is in right direction to ensure the to cameras, ensure then the cable toright the direction front and rear recording screen direction is in right direction before is in right direction before connectrecording the front screen camera direction to the power installation. installation. supply then power on the front camera, enter preview screen and 3. Connect the supplied 5m micro USB cable to the front and confirm the field the of view. Then5m clean theUSB surface of to thethe windshield 3. Connect supplied micro cable front and rear cameras, then connect the front camera to the power rear cameras, then connect the front camera to the Please power with alcohol to ensure that the adhesion surface is clean. supply then power on the front camera, enter preview screen supply then to power on the Rear front camera, enter preview screen refer to Connecting Power Camera (2.3), Powering and confirm the field and of view. Then clean theand surface of the and confirm the field of view. Then clean the surface of the windshield with alcohol to ensure that the adhesion the Device On / Off (2.5). windshield with alcohol to ensure that the adhesion surface is clean. Please refer to Connecting to Power surface is clean. Please refer to Connecting to Power and Rear Camera (2.3), and 4. Removeand the red on the(2.3), double Rearpaper Camera andside Powering the Device On / Off (2.5). sticker. Powering the Device On / Off (2.5). 4. Remove the red paper on the double side 4. Remove the red paper on the double side sticker. 5.  Install rear camera onto the windshield, sticker. press the bracket to ensure it is firmly attached. 5. Install rear camera onto the 5. Install rear camera onto the windshield, press the bracket to windshield, press the bracket to ensure it is firmly attached. ensure it is firmly attached. 15 15 15 DVR-5HD V1.0 04/17 Note: 1. Do not install the device on a film tinted window. Doing so may damage the tint film. 2. This product is suitable for light windshield or light colour heatNote: 1. Do not install thewindows, device on aittinted Doing so may damage the on a resistant film will window. affect video quality if installed tint film. darkproduct window or darkforheat-resistant windows. 2. This is suitable light windshield film or light colour heat-resistant windows, will affect video quality if install it on of thethe dark windows or 3. film Remove theit protective layer on the bottom bracket. dark heat-resistant film windows. 3. Remove the protective layer on the bottom of the bracket. 2.2.4 Adjust Rear Camera 2.2.4 Adjust Camera 2.2.4.1 Record Rear Rearview (interior) 2.2.4.1 Record Rearview (exterior) 1. Adjust rear camera as shown in the image below. If the camera 1.is Adjust camera shownofinthe the vehicle, image below. If the camera is set torear record the as interior to record the exterior set to record the interior of the vehicle, to record the exterior of of the vehicle turn the rotation shaft 180° and then rotate rear the vehicle turn the rotation shaft 180° and then rotate rear camera 180°. Point the lens toward the rear of the car. Note that camera 180°. Point the lens toward the rear of the car. Note that the mark be ininthe theupper upper position to ensure the correct the markshould should be position to ensure the correct camera cameraorientation. orientation. 2. 16 Adjust the rear camera angle by using the preview screen. 16 DVR-5HD V1.0 04/17 2.2.4.2 Record inside the Vehicle 2.2.4.2 Record inside the Vehicle Adjust camera as the picture shown. thecamera cameraisisready ready to 1. 1. Adjust rear rear camera as the picture shown. If Ifthe to record the exterior of the vehicle, turn the rotation record the exterior of the vehicle, turn the rotation shaft shaft 180 °,180 and °, and then rotate rear camera 180°, point the lens toward then inside rotateofrear camera 180°, point the lens toward inside of the the car. Note that the mark shall be in the upper car. Note thattothe mark shall be in the upper position to ensure the position ensure the correct camera orientation. correct camera orientation. 2. Users can adjust rear camera angle by using the preview screen. Note: When viewed through the DVR-5HD screen the image from the rear camera is mirrored. Note: When viewed through the DVR-5HD screen the image from When the image from the rear camera is viewed via a PC the image is true. the rear camera is mirrored. When the image from the rear camera is viewed Note: via a PC the image is true. We recommend users to disconnect micro USB from rear camera before adjusting. Note: We recommend users to disconnect micro USB from rear camera before adjusting. 17 17 DVR-5HD V1.0 04/17 2.3 Connecting toPower Power andRear Rear 2.3 Connecting to Powerto and Rear Camera 2.3 Connecting and Camera Camera 2.3.1 Connecting to Power 2.3.1 Connecting Power 2.3.1 totoPower Use only Connecting the supplied power connector for this device and charging Use onlythe thesupplied suppliedpower powerconnector connectorforforthis thisdevice deviceand andcharging charging Use only the built-in battery. built-in battery. built-in battery. 1.the Cthe onnect one end of power connector to power connector port on 1. Connect Connectone oneend end ofpower powerconnector connectortotopower powerconnector connectorport portonon 1.the device. USB portofinput: DC 5V / 1.0A. thedevice. device.USB USBport portinput: input:DC DC5V 5V/ 1.0A. / 1.0A. the Plug theother otherof end ofthe the caradapter adapter tothe thecigarette cigarette lighter the end car 2.2.P2.lugPlug the other end theofcar adapter to the to cigarette lighter lighter socket socket your vehicle. Once the cablehas has power, thedevice device socket ofofyour vehicle. Once the cable power, the of your vehicle. Once the cable has power, the device automatically automaticallyturns turnson. on.Car Carcharger chargerinput: input:DC DC1212/ 24V. / 24V. automatically turns on. Car charger input: DC 12 / 24V. Note: Note: Please nottodo toblock block thedriver's driver's field of view, install the device under thethe Please dodonot field ofdriver’s view, install the device under the Note: Please notthe to block the field of view, install driving mirror (upper central the front windshield). And recommend that driving mirror (upper central ofof the front windshield). And wewe recommend that device under the driving mirror (upper central ofscreen, the front windshield). the sky and the land occupied 50% the recording screen, please adjust the sky and the land occupied byby 50% in inthe recording please adjust the drive recordersosothat that the alignment icon aligning thedriving driving lane. in And we recommend that the sky and the land occupied bylane. 50% the drive recorder the alignment icon is isaligning the Properinstallation installationenables enablesthe thedevice devicetoto maximize the efficiency and Proper maximize the efficiency and the recording screen, please adjust the drive recorder so that the improve the accuracy LDWS. improve the accuracy ofof LDWS. alignment icon is aligning the driving lane. Proper installation enables 1818 the device to maximize the efficiency and improve the accuracy of LDWS. 18 DVR-5HD V1.0 04/17 2.3.2 Connecting to Rear Camera Use the micro USB cable in the product package to connect the camera. 1.2.3.2 Connect micro USB to recorder USB port. Connecting todrive Rear Camera Use the micro USB cable in the product package to connect the camera. 1. Connect micro USB to drive recorder USB port. 2. Connect micro USB to rear camera USB port.   Note: Install rear camera at upper central position of the rear windshield. 19 DVR-5HD V1.0 04/17 BatteryStatus Status Indicator: Indicator: Battery Battery Status Indicator: Icon Icon Description Description Full battery power. Full battery power. 2/3 battery power. 2/3 battery power. 1/3 battery power. 1/3 battery power. Out of battery power. Out of battery power. Battery is charging. Battery is charging. Connect the car adapter to charge Connect the car adapter to charge Note: Note: Note: Use the products supplied power charger only, please do not use other 1. 1. Use the products supplied power charger only, the please do not power charger, incorrect chargers may cause 1. brand Use the products supplied powerpower charger only, please do not usebattery other to prematurely fail or explode use other brand of power incorrect chargers brand power charger, incorrectcharger, power chargers may power cause the battery tomay 2. Please take note the ambient temperature reaches 45°C or above, the prematurely fail orifexplode cause the tosupply prematurely orreaches explode car adapter will ifstill power tofail device, but 45°C it will ornot charge 2. Please takebattery note the ambient temperature above, the the Li-polymer battery. This ambient is a normal characteristic of not Li-polymer car adapter will still power to device, but it will charge 2.  Please take note ifsupply the temperature reaches 45°C or and is not a malfunction. the Li-polymer battery. This is a normal characteristic of Li-polymer above, adapter will still supply power to device, but it will and is the not car a malfunction. not charge the Li-polymer battery. This is a normal characteristic Low Voltage: and is not a malfunction. of Li-polymer Low Voltage: Low Voltage: Note: Note: the device is connected to the and car turned adapter turned If theIfdevice is connected to the car adapter on, and and the screenon, Note: displays a charging remindertosymbol asreminder theand image above, means If the device is connected the carsuch adapter turned on, itand the that screen and the screen displays a charging symbol such asthethe available too low. symbol Please such wait as for the a few minutes the charging displays avoltage chargingis reminder image above,until it means that the image above, it means that the wait available voltage isuntil toothe low. Please reminder symbol before entering the video recording mode to available voltage isdisappears too low. Please for a few minutes charging prevent recording or file damage. reminder symbol disappears before enteringreminder the video symbol recordingdisappears mode to wait for ainvalid few minutes until the charging prevent invalid recording or file damage. before 20 entering the video recording mode to prevent invalid recording or 20 file damage.   20 DVR-5HD V1.0 04/17 2.42.4 LED Indicator LED Indicator Status Explanation LED Indicator colour Power off, battery charging Red Power off, battery full charged LED light off Power on, battery charging Red Power on, battery full charged Green Standby / Standby and screen off Green Recording/ Recording and screen off Flash red 21 21 DVR-5HD V1.0 04/17 2.5 Powering the Device On / Off 2.5 Powering the Device On / Off 2.5.1 Auto Power On/Off If2.5.1 the drive recorder is connected Auto Power On/Off to the vehicle power supply, once you car engine, the drive recorder automatically If thestart drivethe recorder is connected to the vehiclewill power supply, power once youstart start recording. the car engine, drive recorder will automatically on and Oncethethe vehicle engine shuts down, the power on and start recording. device automatically saves the recording and turns off the power Once the engine shuts down, the device automatically saves within 10 vehicle seconds. the recording and turns off the power within 10 seconds. 2.5.2 Power On/Off andand Reset 2.5.2Manual Manual Power On/Off Reset 2.5.2.1 Manual Power On 2.5.2.1 Manual Power On Slide the power switch up and make Slide the the power up and make sure that powerswitch switch locks on the sure thatcard theslot. power switch locks on the memory memory card slot. On 2.5.2.2 Manual Power Off Slide the power switch down and the device starts its power off sequence. Do 2.5.2.2 Manual Off it is in not power on thePower device when Slide the power switch and the the power-off sequence, or down the recorded device itscorrupt. power off sequence. Do Off file maystarts become not power on the device when it is in the power-off sequence, or the recorded file 2.5.2.3 Reset the Device may become corrupt. In case the device fails to function normally due to unknown causes, 2.5.2.3 theswitch Device slide theReset power and verify the memory card is in the removable wait forto10function secondsnormally and slidedue the to power up switch In case thestate; device fails unknown causes, again the to restart the device. slide power switch and verify the memory card is in the removable state; wait for 10 seconds and slide the power up switch again to restart the device. 22 22 DVR-5HD V1.0 04/17 2.6 Initial Settings Before using the device, we recommend you setup the correct Time 2.6 Initial zone, Settings Date and Time. Before using the device, we recommend you setup the correct Time zone, Date and Time. Note: Please note that if you press the button during recording, the system will Note:stop Please note that if you press the button during recording, recording and enter OSD menu. Make sure the recording is already the system recording enter OSD menu. Make sure the stopped will thenstop continue operating and the menu. recording is already stopped then continue operating the menu. 2.6.12.6.1 Set Time Set zone Time zone Tothe settime the time zone, do the following: To set zone, do the following: 1. Press the button to enter the OSD menu. 1. Press the button to enter the OSD menu. Press the / button to 2. the 2. Press / button to select select Setand Timezone, and then Set Timezone, then press the button to press to the enter the button function enter the function menu.. menu.. 3. Press the / button to 3. Press the / button to set set the current time zone, and the current timethe zone, and then then press button to press the button to complete complete setting. setting. 4. Press the button to return to recording screen. 4. Press the button to return to recording screen. 23 23 DVR-5HD V1.0 04/17 Greenwich Time(GMT) (GMT)map map time zones: GreenwichMean Mean Time of of time zones:   Note: 1. If Time Sync. is on, device clock will be calibrated via satellite clock signal based on Set Timezone. Please refer to Satellite Synchronization (4.2). 2. If satellite positioning is not successful, device clock will run based on user defined time. 24 24 DVR-5HD V1.0 04/17 2.6.2 Set the Date / Time To set the correct date and time, do the following: 1. Press the button to enter the OSD menu. 2. Press the / button to select Date / Time, and then press the button 3. Press the / button to adjust the value, and then press the button to set the next field. 4.   Repeat step 3 until the date and time setting is completed. Note: To ensure the accuracy of the video file time, please reset the date and time when the battery is completely discharged or when the device has not been used for over 7 days. 25 25 DVR-5HD V1.0 04/17 3 Using the Drive Recorder 3.1 Automatic Record If the drive recorder is connected to the vehicle power supply and power switch is in the On position once you start the car engine, the drive recorder will automatically power on and start recording. Recording will automatically stop when the engine is switched off. Note: 1. Some vehicle power supplies don’t turn on / off automatically with the car engine, if the device can not automatically power on/off with the car engine, please manually connect the power supply with the vehicle power, and then power on, or manually power off the device and then release the connector with the car power supply. 2. The device can be configured to save a video file for every 1 or 3 minutes of recording. Please refer to Record Interval (4.2). 3. All the videos and photos are saved in the memory card, if memory card is full, loop recording will be generally overwrite the oldest video file. 3.1.1 Resolution 1.  Front Camera: 2K HD@30 (1440P 30fps) / FHD@60 (1080P 60fps) / FHD HDR (1080P HDR 30fps) / FHD@30 (1080P 30fps) / HD@120 (720P 120fps). 2.  Rear camera resolution setting is FHD@30 (1080P 30fps), the resolution will not change by front camera resolution setting. 26 DVR-5HD V1.0 04/17 3.1.2 TheThe Recording Screen 3.1.2 Recording Screen 8 9 10 11 1 12 2 3 4 5 6 No. Icon Item Description 1 Recording Duration Indicates duration. the video current 2 Date / Time Indicates the current recording date and time. 3 Menu Button During video recording, press the button to enter the OSD menu. 4 PIV (Picture in Video) Button Press to capture video screen shots from the front camera. 5 Emergency Recording Button During video recording, press the button to enter emergency recording mode. Please refer to Emergency Recording (3.1.3). 27 27 DVR-5HD V1.0 04/17 6 Switch Camera Button 7 Voice Record icon 8 Resolution icon 9 Satellite Positioning icon 10 Battery Power icon Indicates battery charging status. 11 VIV (Video in Video) Indicates rear camera recording screen. Press to switch VIV screen. Indicates voice recording sets as off, the sound will not be recorded. Indicates the video resolution. Indicates the strength of satellite icon shows positioning. If the up on screen, it indicates that the device cannot complete the satellite positioning. or device 28 28 DVR-5HD V1.0 04/17 3.1.3 3.1.3 Emergency Recording Emergency Recording To start the Emergency Recording, do the following: To start the Emergency Recording, do the following: 1.  During Video Video Recording, presspress the 1. During Recording, button to button enter toemergency the enter recording mode, recording the “Emergency” emergency mode, the “Emergency” message will be message will be shown immediately shownleftimmediately the on the upper corner of theon screen, upper left corner of the screen, and the recorded file will be protected. and the recorded file will be 2. The emergency video recording length protected. is same as the recordingvideo interval setting.length When isthesame emergency 2. The emergency recording as the recording length reaches setting, the system will return to the recording interval the setting. When the emergency recording reaches thePlease setting,refer the system will return to the(4.2). general general length recording mode. to Record Interval recording mode. Please refer to Record Interval (4.2). Note: 1. If the Collision Detection function is enabled and a collision Note: is detected, the device will automatically trigger the emergency 1. If the Collision function is enabled and a collision recording. Please Detection refer to Collision Detection (3.4.4).is detected, the device will automatically trigger the emergency recording. Please refer to 2. The emergency recording file is created as a new file, which will Collision Detection (3.4.4). be 2. protected to avoid being normal loop The emergency recording fileoverwritten is created as aby new file, which willrecording. be protected to avoidcard beingcan overwritten by normal recording. video A memory card can save A memory save up to 20 loop emergency files if record up to 20 emergency video files if record interval time is 1 minute, and save up interval time is 1 minute, and save up to 10 emergency video to 10 emergency video files if record interval time is set as 3 minutes. files if record interval time is as 3 minutes. 3. The notice message of set “Emergency files are full” will pop up on the screen when the emergencyof recording folder is full, and the emergency filesup will 3. The notice message “Emergency files arelater full” will pop be saved in the Normal Video folder which will be over written if memory is on the screen when the emergency recording folder is full, and the full. Thus, if you want to keep newest emergency video file, please manually later delete emergency files saved in thefolder Normal Video folder the oldest files will in thebe emergency video to release more capacity. referover to File Deletionif (4.2). whichPlease will be written memory is full. Thus, if you want to keep newest emergency video file, please manually delete the oldest files in the emergency video folder to release more capacity. Please refer to File Deletion (4.2). 29 29 DVR-5HD V1.0 04/17 3.3 Picture in Video You can also use this device to take snapshots of the current scene. 1. 3.3 In recording status,in press Picture Video to capture recording screen shots from the front lens. You can also use this device to take snapshots of the current scene. 2. When the icon shows in the central of screen, it means the to capture recording screen 1. In recording status, press screenshots is completed. shots from the front lens. 2. shows in When the icon the central of screen, it means the screenshots is completed. Note: 1. The screen shots image resolution quality is depending on the video Note: resolution setting. Please refer to Resolution (4.2). Thescreen definitionshots of picture in video by this product, picture resolution 1 2. The image resolution quality the is depending on isthe limited by the speed of the target object and changes in ambient lighting. The video resolution setting. Resolution (4.2). scenes photograph function is betterPlease used forrefer takingtostill pictures in accident 2.  The definition picture in for video bylight. this product, the picture or when the car isofstopped to wait a traffic 3. It is available only for by the the frontspeed cameraof if user wants toobject take pictures during resolution is limited the target and changes inrecording. ambient lighting. The photograph function is better used for . 30 taking still pictures in accident scenes or when the car is stopped to wait for a traffic light. 3. It is available only for the front camera if user wants to take pictures during recording. 30 DVR-5HD V1.0 04/17 3.4 Driving Safety The following driving safety function is for reference only. Drivers are advised to exercise discretion based on actual road conditions. Note: 1. The Driving Safety function is limited to triggering no more than two alarms at the same time. If a voice and alert message have been triggered, any other alarm will be ignored until either of the two is settled. 2. Satellite positioning must be completed before functions such as Speed Limit Alert, LDWS and FCWS to be enabled. Be sure to check that Satellite positioning has been completed prior to using the product. 3. The detections of LDWS, FCWS and FCMD may be inaccurate when used in rain, at night or in environments of insufficient lighting. Drivers are advised to exercise discretion based on actual road conditions. 31 DVR-5HD V1.0 04/17 3.4.1 Speed LimitLimit Alert Alert 3.4.2 Speed 3.4.2 Speed Limit Alert If the Speed Limit Alert produces If the Speed Limit Alertfunction functionisisenabled, enabled, this this product product produces Ifaudible the Speed Limit Alert function is enabled, this product producesisis audible alert message once car’s location location alertand andscreen screen message once your your car’s audible alert and screen message onceexceeds your car’s location determined GPSand andits itsrunning running speed speed the limit. determined byby GPS exceeds theset set limit.isTo determined by GPS and its running speed exceeds the set limit. the Speed do following: the following: set To theset Speed Limit Limit Alert,Alert, do the To set the Speed Limit Alert, do the following: 1. Press to enter the OSD menu. 1. Press the the buttonbutton to enter the OSD menu. 1. Press the button to enter the OSD menu. 2. Press the / button to select 2. Press the / button to select 2. Press theLimit / Alert, button and to select Speed then Speed Limit Alert and then then Speed Limit Alert,, button and press the for presspress the the button button to enterfor the entering function menu. function menu entering function menu. 3. Press the / button to 3. 3. PressPress theupthe / / Limit button tototo set button set a Speed Alert up a Speed Limit Alert[Off tothis up aset Speed Limit Alert toalarm trigger trigger this product’s / trigger this product’s [Off / product’s [Off (30~125 / 50alarm ~ 200 km/h 50 ~ alarm 200 km/h mph)], 50 ~ 200 (30~125 mph)], and thenkm/h press thepress (30~125 mph)], and then the and then press setting. the button to complete button to complete setting. button to complete setting. to return recording screen. 4. Press the button button 4. 4. Press the the to return recording screen. return recording 5. Press The alarm screenbutton turns to red to remind you screen. to slow down if you 5. 5. The alarm screen turns red to remind you to slow down if you are The turnsthe redspeed to remind are alarm drivingscreen faster than limit. you to slow down if you driving thethan speed limit. limit. arefaster drivingthan faster the speed 33 33 32 DVR-5HD V1.0 04/17 3.4.2 Parking Mode 3.4.3 Parking Mode To monitor the vehicle when it is parked, you can activate Vibration To monitor the vehicle when it is parked, you can activate Vibration Detection , or or Motion Detection. Follow the steps Detection, Motionand and Collision Collision Detection. below to change thebelow settings for Parking Mode:for Parking Mode: Follow the steps to change the settings 1. Press the button to enter the OSD menu. 1. Press the button to enter the OSD menu. 2. P2. ress Press the the/ to select / button button to Parking Mode , andMode, then and press the select Parking then button the to enter the function button for press menu.entering function menu. 3. Press the / button to configure Parking Mode (Vibration Detection Motion / and Collision button to configure Parking Mode 3. Press / the Detection / Off), and then pressand theCollision button to / complete (Vibration Detection / Motion Detection Off), and setting. button to complete setting. then press the • • Vibration Vibration Detection: Detection: If disconnected external power supply when the deviceis -  If- disconnected external power supply when the device is powered on, the system alert message “Wait 10 powered on, the system alert message “Wait 10 seconds seconds to enter Vibration Detection.” This means to enter Vibration Detection.” This means system the system will power off and enter Vibrationthe Detection will power off andinenter Vibration Detection automatically automatically 10 seconds. Vibration Detection Mode is triggered, when the in-10 Once seconds. device detectsDetection any collision, it will automatically power -  Once Vibration Mode is triggered, when the on and start recording, the event will be recorded for 60 device detects any collision, it will automatically power seconds (per file). on- and startmode, recording, the eventis will be recorded 60 In this drive recorder powered off until for event seconds (per file). happens. This mode is more power saving. this mode, drive recorder is powered off until event • -  In Motion and Collision Detection: happens. This mode external is more power powersupply saving.when the device - If disconnected is powered on, theDetection: system alert message “Enter • Motion and Collision -  If disconnected external power supply when the device 34 is powered on, the system alert message “Enter parking 33 DVR-5HD V1.0 04/17 mode after 10 sec.” This means the system will enter Motion and Collision Detection automatically in 10 seconds, and then LCD screen turn off after 30 seconds (the device will turn off the screen temporarily, but still in standby detection status. Press any button to turn on the operation screen). - In the Motion and Collision Detection mode, when the device detects any motion in front of lens, or when the device detects collision, the automatic record will be activated. - In this mode, when the device detects collision or any motion in front of lens, the video recording will be triggered and the event will be recorded for 10 seconds (per file). If the event lasts more than 10 seconds, the device will keep recording up to 2 minutes. - In this mode, the device is in standby mode until event happens. This mode will consume more battery power. • Off: No parking monitoring activated. 4. Press the button to return recording screen. Note: 1. When Vibration Detection or Motion and Collision Detection is on, the device records events by front camera only. 2. If battery in a fully charged condition, it can record about 20 minutes video in Motion and Collision Detection mode. As the device is used, the battery storage capacity will decrease gradually. This is a normal phenomenon for the battery. 3. The video files taken in Parking Mode will be saved in “Parking Mode” folder, which will not be overwritten by normal video files. However, if the remaining memory capacity is not enough to save the last normal video file, the oldest Parking Mode video will be deleted. Please always make sure your backup Parking Mode video files. 4. Parking Mode folder can save about 40 parking mode files, when parking mode files are full, loop recording will overwrite the oldest file.   34 DVR-5HD V1.0 04/17 3.4.4 Collision Detection 3.4.3 Collision Detection If the Collision Detection function is enabled, this device begins If theemergency Collision recording Detection function is any enabled, this device begins once it detects collision. emergency recording once it detects anyfunction collision. of the Sensitivity of the Collision Detection is Sensitivity set to Normal by Collision Detection function is set tothe Normal by of default, if user wants default, if user wants to change settings Collision Detection, do the the following: to change settings of Collision Detection, do the following: to the enter the menu. OSD menu. 1. the Press thebutton button 1. Press to enter OSD 2. Press / to select 2. the Press the /buttonbutton to select Collisionand Detection, and Collision Detection, then press button then pressto the the button enter the function for entering function menu. menu. / button to 3. 3. Press Press the the / button to change the sensitivity of this changedevice’s the sensitivity of this device’s collision detection collision detection (High Sensitivity (High Sensitivity / Normal / NormalSensitivity Sensitivity/ /Low Low Sensitivity Sensitivity / / Off), andpress then press Off), and then the the button for entering to enterbutton the function menu. function 4. Press menu. the button to return recording screen. 4. Note: Press the button to return recording screen. 1.The emergency recording file is created as a new file, which will be protected to avoid being overwritten by normal loop recording. If Note: record interval time is set as1 minute, a memory card can save up 1. The emergency recording file is created as a new file, which will be protected to 20toemergency video files, and save up to 10If emergency avoid being overwritten by normal loop recording. record interval video time is as1 minute, a memory canas save up to 20 emergency video files, and files ifsetrecord interval time card is set 3 minutes. to 10 emergency video files if record interval time is set as 3 minutes. 2. The save alertup message of “Emergency files are full” will pop up on the 2. The alert message of “Emergency files are full” will pop up on the screen screen when the emergency folder full, and thefiles later when the emergency recording recording folder is full, and the is later emergency will be savedfiles in thewill Normal Video folder will be over folder written ifwhich memory is emergency be saved in thewhich Normal Video will full. Thus, if you want to keep newest emergency manually be over written if memory is full. Thus, if you video wantfile, to please keep newest delete the oldest files in the emergency video folder to release more space. emergency video file, please(4.2). manually delete the oldest files in the Please refer to File Deletion emergency video folder to release more space. Please refer to File Deletion (4.2). 36 35 DVR-5HD V1.0 04/17 3.4.5 Driver Fatigue Alert If the Driver Fatigue Alert function is enabled, this product 3.4.5 Driver Fatigue 3.4.4 Driver Fatigue Alert Alert produces audible alert and screen message one hour after it has If Driver the Driver Alert function is enabled, thisproduces product If the Fatigue Alert function is enabled, this begun recording andFatigue repeats the alerts every half hourproduct afterwards. produces audible alert and screen one message hour after begun it has audible and screen hour one after it has To enablealert the Driver Fatigue message Alert, do the following: begun recording and repeats the alerts every half hour afterwards. recording and repeats the alerts every half hour afterwards. To enable To enable Fatigue Alert, the menu. following: 1. Driver Press the the Driver button enter thedo OSD the Fatigue Alert, dotothe following: 1. ress thethe thebutton to enter the OSD menu. Press button totoenter the OSD menu. Alert, and 2. P1. Press / button select Driver Fatigue 2. Press / button to select Driver Fatigue Alert, and then the press the button 2. Press the / button to select Driver Fatigue Alert, and for press entering function menu. then the button to enter then press the button function menu. for the entering menu.to /function button 3. thePress 3. Press theOn, and / thenbutton select press to theselect / button to 3. and Press the On, then press button button to the enable the select On, and then press the to function. enable the function. button to enable the 4. Press function. the button to return recording screen. 5. This product produces audible alert screen when to Driver 4. and Press the message button Fatigue activates. return Alert recording screen. 5. button to 4. Press the recording screen. Thisreturn product produces audible alert and screen message when Driver Fatigue Alert activates. 5. This product produces audible alert and screen message when Driver Fatigue Alert activates. 37 37 36 DVR-5HD V1.0 04/17 The Headlight Warning function produces audible alert and screen message when it detects poor lighting conditions through the 3.4.6 Headlight Warning recording displays of this device, including driving in rainy or cloudy 3.4.5 Headlight Warning weather, at night, and infunction basements, parkingaudible lots, andalert tunnels. The Headlight Warning function produces audible alert and screen The Headlight Warning produces and screen To enable the Headlight Warning, do the following: message when it detects poor lighting conditions through message when it detects poor lighting conditions through the the recording displays of this device, including driving in rainy or cloudy recording displays this including in rainy or cloudy button to enter theparking OSDdriving menu. 1.weather, Press the at night,ofand indevice, basements, lots, and tunnels. weather, at night, and in Warning, basements, car parks, and tunnels. To the Headlight 2.To enable Press the / button todo the following: enable the Headlight Warning, do the following: Headlight and the OSD menu. button to enter 1. select Press thebuttonWarning, 1. Press the press the OSD menu. button then the to enter 2. P2. ressforPress the / / menu. button entering the function button toto select select Headlight Warning, and and then Headlight Warning, / tothe 3. button then pressbutton the pressPress the the tobutton enter select On, and then press for menu. entering function menu. the function button to enable the 3. P3. ressfunction. the the / / button button toto Press select select On, and the the On,then and press then press button to enable the function. button to enable the 4. Press function. the button to return recording screen. 5. This product produces audible alert button to return recording screen. 4. Press the and screen message when Headlight 5. This activates. product produces audible alert and screen message when Warning 4. 5. Headlight Warning activates. button to return recording screen. Press the This product produces audible alert and screen message when Headlight Warning activates. 38 38 37 DVR-5HD V1.0 04/17 .4.7 LDWS 3.4.7 LDWS 3.4.7 LDWS 3.4.6 LDWS nce yourOnce car’s your location determined by GPS and the LDWS car’sislocation is determined by GPS and the LDWS Once car’s location determined byand GPS and youryour car’s location is isdetermined by GPS and the the LDWS LDWS nctionOnce isfunction enabled, device produces alert screen isthis enabled, this device audible produces audible alert and screen function is enabled, this device produces audible alert screen function is enabled, this produces audible alert and screen essage when you drive off or device change lanes at speeds over 70 and message when youof drive off of or change lanes at speeds over 70 message when you drive off of or change lanes at speeds over 70 m/h (43message mph). km/h (43when mph).you drive off of or change lanes at speeds over 70 km/h (43 mph). o enable the(43 LDWS (Lane Departure Warning Systems), do the km/h mph). To enable the LDWS (Lane Departure Warning Systems), do the To enable the LDWS (Lane Departure Warning Systems), do the llowing: To following: enable the LDWS (Lane Departure Warning Systems), do the following: following: Press thetoOSD 1.the Pressbutton the to enter button entermenu. the OSD menu. to enter the OSD menu. 1. P1. ress Press the thebuttonbutton to enter the OSD menu. Press the / button to 2.ressPress the / / button button to 2. P the to select Press / button to select 2. LDWS, andthe then press select then LDWS, andLDWS, then and press thepress select LDWS, and then press button for entering the button for entering the button to enter the function menu. button for entering the function menu. function menu. menu. 3. Press function the / button to select PressOn, / thepress button 3.theand Press / theto button to then button Press the press / the button to select 3. and then select On, and then press the toOn, enable the function. select On, and then press the button to button enableto the enable the function. function. button to enable the function. button to return totorecording Press 4. P ressPress the the button to return recording screen.screen. button return to screen. recording 4.the button to return to recording screen. 4. Press the 5.  A fter enabling LDWS, the will screen willtraffic display traffic lane align After enabling LDWS, the screen display lanetraffic align lane 5. After enabling LDWS, the screen will display align After enabling LDWS, thedrive screen will display traffic lane align please adjust the recorder sothat that the ,icon, please adjust theadjust drive recorder the icon 5. icon , please the drive so recorder so horizontal that the , level please adjust the drive so lines that the iconand horizontal line eye level are overlapped andrecorder the line and the the eye are overlapped and theslash slash are horizontal line and the eye level are overlapped and the slash horizontal linedriving and the eye level are overlapped and the slash lines are centered incentered the lane. lines in arethe inlane. the driving lane. centered driving lines are centered in the driving lane. Vanishing Point Eye Level   Eye Level Eye Level Horizon Vanishing Point Vanishing Point Horizon Horizon 39 39 39 38 DVR-5HD V1.0 04/17 6. This product produces audible alert and screen message when 6. This product produces audible alert and screen message when LDWS activates. LDWS activates. Note: Note: 1. 1. Please frontwindshield windshield viewing area, nottheblock the Pleasemeasure measure front viewing area, do not do block driver's forwardforward field of vision, and install and the device rearview mirrorrearview (upper driver’s field of vision, installbelow the device below central of the front windshield). We recommend that the sky and the ground mirror (upper of the frontinstall windshield). that occupied 50 %central of the video screen, the bracket We thenrecommend adjust the device the occupied % of the video screen, install to sky makeand the the laneground is aligned to the lane50alignment icon. Correct installation makes the device maximize efficiency and improve the is accuracy the bracket then to adjust the the device to make the lane alignedof to LDWS. the lane alignment icon. Correct installation makes the device 2. Make sure that traffic lane align icon will not be obscured other things (e.g. to maximize thecause efficiency and improve the isaccuracy hood). It may misjudgment if the endpoint obscured. of LDWS. 2. Make sure that traffic lane align icon will not be obscured other things (e.g.hood). It may cause misjudgment if the endpoint is obscured. 40 39 DVR-5HD V1.0 04/17 Once your car’s location is determined by GPS and the FCWS 3.4.8 FCWS this device produces audible alert and screen function is enabled, Once your you car’sdrive location is determined by GPS and and the are FCWS message when at speeds over 60 km/h (37 mph) 3.4.7 FCWS is enabled, audible alert and not screen less function than 15m away fromthis thedevice car inproduces front of you. If the device Once your car’s location by GPS (37 and the and FCWS message youpositioning, driveisatdetermined speeds over 60 km/h completes thewhen satellite and the leading vehiclemph) distance are function ismeters, enabled, thisalso device alert and screen less 15m itaway from the produces car a in warning frontaudible of you. If the device not below 15than will produce screen and voice message whenthe you drive positioning, at speeds over 60 km/h (37 mph) distance and are completes satellite and the leading vehicle reminder. below 15 it willthe also produce a of warning andthe voice To enable the meters, FCWS (Forward Collision Warning do less than 15m away from car in front you.System), Ifscreen the device does reminder. following: not have GPS, and the leading vehicle distance is below 15 meters, To enable the FCWS (Forward Collision Warning System), do the it1.willfollowing: also produce abutton warning screen to enter the and OSDvoice menu.reminder. To enable Press the the FCWS (Forward Collision Warning System), do the following: 2. the the / button to button to enter the OSD menu. 1.Press Press select FCWS, and then press 1. Press the button to enter the 2.the Press the / entering button to button for OSD menu. select FCWS, and then press function menu. 2. Press the / button button to select for entering 3. FCWS, Press the then / press button function menu. and theto selecttoOn, and then pressmenu. the button enter 3. Press thethe function / button to theselect 3. Press the button/ to enable button to select On, and then press the On,function. and then press the button to button to enable the enablefunction. the function. 4. Press the button to return recording screen. 5.  This product produces audible alert button to return recording screen. 4. Press the and screen message when FCWS 5. activates. product audible and screen message toalert return recording screen. when 4.ThisPress theproducesbutton FCWS activates. 5. This product produces audible alert and screen message when FCWS activates. 41 41 40 DVR-5HD V1.0 04/17 3.4.8 FCMD 3.4.9 FCMD If FCMDfunction is enabled then the device will determine if an object (car) in If FCMD is enabling, the device will determine it from front 3.4.9 FCMD in front of the device, within 0.3~4 meters. car about 0.3 ~function 4 meters. When thethe front object aboutit3from ~ 5 front If FCMD is enabling, device willmoves determine If thecar front moves, but the device does not start to seconds andobject the notforward, start to drive forward, device will about 0.3car ~ 4did meters. When the front objectthe moves about 3~5 issue audible alert and screen message. moveseconds , after 3~5 seconds the device will emit an audible warning and and the car did not start to drive forward, the device will To enable FCMD (Front Move Detection), do the following: display a the message on the Car LCD screen. issue audible alert and screen message. 1. Press the button to enter the OSD menu. do To enable the FCMD (Front Car Move Detection), dothe thefollowing: following: To enable FCMD (Front Car Movement Detection) / buttontoto 2. Press the 1. Press button enterthe the OSD menu. 1. Press the the button to enter select FCMD, press / button to 2. Press the and then OSD button for entering the menu. select FCMD, and then press 2. Press the menu./ button to select function button for entering the and press the / button tobutton 3. FCMD Press,function the then menu. On, and the toselect enterPress the function / press button to 3. the thenmenu. button the 3. Press the / toandenable button to select select On, then press the function. On, and then press button buttontheto enable theto enablefunction. the function. 4. Press the button to return recording screen. 5.  This product produces audible alert button to return recording screen. 4. and Press the message screen when FCMD is 5. activates. This product produces audible alert and screen button to return recordingmessage screen. when 4. Press the FCMD is activates. 5. This product produces audible alert and screen message when FCMD is activates. Note: Note: The will detects thechange front image to determine FCMD notification Thedevice device detects atchange the front the vehicle to determine Note: alert, so if the car is in rest condition and front object moves, the device may The device will detects the front image to determine FCMD notification FCMD alerts. If the device stationary but the object moves a occur false judgment, and please judge it change according tofront the actual driving so if the car is in rest condition and front object moves, the device may situation. little alert, the device will alert. Please be alert and use your judgement to occur false judgment, and please judge it according to the actual driving assess the actual driving condition. situation. 42 42 41 DVR-5HD V1.0 04/17 3.5 File Playback File Playback 3.5 File Playback 3.53.5 File Playback 3.5 File Playback 3.5.1 Playing Videos 3.5.1 Playing Videos 3.5.1 Playing Videos 3.5.1 Playing Videos 3.5.1 Playing Videos Playback video record files as follows: Playback video record files asfollows: follows: Playback video record as Playback video record files as Playback video record filesfiles asfollows: follows: 1.Press Press thebutton button enter theOSD OSD menu. Press button totoenter the menu. 1. ress the tototo enter the menu. 1. Press the button enter the OSD menu. 1. P1. the the button enter theOSD OSD menu. 2. Press the / button to select 2.Press Press the / / / / button button Press button 2.2. 2.Press the toto toto the the button File Playback, and then and press the select File Playback, and then select Playback, then select File Playback, then select FileFile Playback, andand then button tothe enter the function menu. button for press the button press button for press button for for press the the entering function menu. entering function menu. 3. Press thefunction /menu. button to entering entering function menu. select Video / Parking Mode / 3.Press Press the / / / / button button Press button 3.3. 3.Press the toto toto the the button Emergency, and then press the select Video / Parking Mode select Video / Parking Mode // select Video / Parking Mode select / Parking button forVideo entering menu. Mode/ / Emergency, and then press the Emergency, then press Emergency, and then press the Emergency, andand then press the the button for entering button entering button for entering button for for entering menu. menu. menu. menu. 4. P4. ress button browse video files, select the video button browse video files, select thevideo video 4.Press Press// / / / button button toto browse video files, select the Press tototo browse video files, select the 4. button browse video files, select thevideo video 4. Press filefileand then press the button to enter Playback Mode . If button to enter Playback Mode. file and then press button to enter Playback Mode. file and then press button to enter Playback Mode. If and then press button to enter Playback Mode. If IfIf file and then press thumbnail shows indicates that the file is dual-lens icon, indicates that the dual-lens thumbnail showsicon, icon, ititindicates that the isisdual-lens thumbnail shows icon, itititindicates that the file isfile dual-lens thumbnail shows icon, indicates that the file isfile dual-lens thumbnail shows recording. InInthe Playback Mode , you can use the button to button to recording. thePlayback Playback Mode, you can use button button recording. InIn the Mode, toto to recording. Playback Mode, you can use button recording. Inthe the Playback Mode, youyou cancan useuse switch the front and rear lens recording file. switch the front and rear lens recording file. switch the front and rear lens recording file. switch the front and rear lens recording file. switch the front and rear lens recording file. 5.Press Press the repetitively repetitively return recording screen. Press repetitively totoreturn recording screen. 5.5. 5.Press the return recording screen. the the repetitively return recording screen. 5. Press the repetitively tototo return recording screen.   43 43 43 43 42 DVR-5HD V1.0 04/17 3.5.2 Viewing Pictures 3.5.2 Viewing Pictures View pictures as follows: View pictures follows: 3.5.2 Viewing Pictures pictures 1. View Press the as follows: button to enter the OSD menu. 1. Press the button to enter the OSD menu. Press the to enter 2. 1. Press the / button button to the OSD menu. select File Playback, and then 2. P2. ressPress the the/ to select /button button to button selectthe File Playback, and for then Filepress Playback , and then press the entering function menu. button for press buttonthe to enter the function entering / menu. button to 3.menu. Press the function enter Picture, and then press / button to Press the button for entering the 3. Pressenter the Picture, / button topress enter and then menu. button for the entering the and then Picture, press buttonmenu. for entering menu. 3. 4. Press / button to browse the photo file, /selectbutton the file and then to browse the photo file , select the file 4. Press press button to enter the photo button to enter the photo Playback then press / button to browse the photo file , select the file 4. and Press Playback Mode. Mode. and then press Mode. 5.5.Press thethe Press 5. Press the button to enter the photo Playback repetitively to return recording repetitively to return recordingscreen. screen. repetitively to return recording screen. 44 44 43 DVR-5HD V1.0 04/17 3.5.3 Playback Screen 3.5.3 Playback Screen Video Playback Screen Picture Playback Screen 1 1 9 2 3 4 5 6 7 8 10 No. Icon Item 9 11 3 4 12 13 Description 1 File Number / Total File Indicates of the total number of files. 2 Fast Forward / Fast Rewind icon Indicates video fast-forward and rewind status. 3 File Name Indicates the file name of video / picture. 4 Return Press the button to return preview screen of video or picture. Press the button repetitively to return recording screen. 5 / Fast Rewind / Previous File Button When playing videos, press the button will reverse the playback. button to view previous Press file. 6 / Fast Forward / Next File Button When playing videos, press the button to fast forward playing video. button to view next file. Press 7 / Playback/ Pause button Press the button to play or pause the video. 45 44 DVR-5HD V1.0 04/17 No. Icon Item Description 8 Lens Switch Button In playback mode, press button to switch files with dual lens recording file. 9 Battery icon Indicates status. 10 Playback Duration / Total Duration Indicates video playback time and total duration. 11 Date and time Indicates the date and time of film. 12 Previous File When viewing pictures, press the button will switch over to the previous file. 13 Next File When viewing pictures, press the button will switch over to the next file. Battery or charging 46 45 DVR-5HD V1.0 04/17 3.6 Deleting Files To delete file(s), do the following: 3.6 Deleting Files 1. Press the button to enter the OSD menu. 3.6 Deleting Files To delete file(s), do the following: To delete file(s), do the following: 2. P1. ress Press the the/ button to enter select button to Deletion , and then press the the menu. 1. File Press theOSD button to enter thebutton OSD menu. the to enter the function menu. / button to 2. Press the buttonand to then 2. Pressselect the File/ Deletion, 3. Pselect ress the button to select File Deletion, andbutton then for press the/ Video / the Parking Mode / Emergency function menu. button for pressentering menu. / entering Picture,function and then press the / button to 3. Press the button for entering menu. / / / Parking button Mode to 3. Pressselect the Video / Picture, and/ then selectEmergency Video / Parking Mode Emergency Picture, andbutton then for press /the menu. button for pressentering the entering menu. One: •One: Delete • Delete • Delete buttonDelete to select One,press and Press thebutton/ to select - Press the - One: / OneDelete , and then / menu. button to to select One, and -button Press the press button enterDelete the menu. tothen enter the then press button to enter the menu. - Press / button to browse files , select the files Pressyou want / to and browse files , select the button files to tobutton delete then press - Press you/ want to browse files, select the files you want to enterbutton thedelete menu. button to to and then press delete and then button to enter the menu. enter thepress menu. - 46 47 DVR-5HD V1.0 04/17 47 - Press / to select buttonitem, to select item, andthe then - Press the / the button and then press - Press the // button toto select and then press the button confirmitem, or cancel the / button to confirm or cancel the selection. press the / button to confirm or cancel the - Press the selection. selection. press the selection. / button to select item, and then button to confirm or cancel the / • Delete All: • Delete All: • -Delete All:the / select All Delete Press - Press the / button tobutton selecttoDelete , and All, thenand press / button button to select Delete All, and PressAll: the • - Delete to enter the menu. then press button to enter the menu. 3.5 then File Playback button to enter the menu. press - Press the then press / button to select Delete All, and button to enter the menu. 3.5.1 Playing Videos Playback video record files as follows: 1. Press the button to enter the OSD menu. Pressthe the buttontoto select item, and then 2. - Press // button - select Press thePlayback, // button and then pressFile the button confirmitem, or cancel the and thentoto select press the button to confirm or cancel the - press Press/the the button / button select item, then selection. for to - Press the tobutton select item, and thenand press the selection. press function the / button to confirm or cancel the entering menu. / button to confirm or cancel the selection. selection. 3. Press the / button to select Video / Parking Mode / Emergency, and then press the button for entering 4. Pressmenu. the repetitively to return recording screen. 4. Press the repetitively to return recording screen. Press repetitively to return recording screen. 4. 4. Press the the repetitively to return recording screen. Note: Note: icon, and then the files records with rear lens will be the file has the 1. Note: Othe nly front thumbnails display Menu, youwill choose icon,press and thenwill thebe files records with rear iflens be file hascamera the button to in enter Mode. If and thumbnails then 1.deleted. Only frontfile camera will be display in Menu, if you Playback choose to delete 2.todeleted. Deleted files cannot be recovered. Ensure the files the have already delete thethe file has the icon, and then records with icon, indicates that the file iswill dual-lens thumbnail shows icon, and then the itfiles records withfiles rear lensbackup be the file has 2. before Deleteddeletion. files cannot be recovered. Ensure the files have already backup deleted. rear lens will be deleted. button to recording. Playback Mode, deletion. 2.before Deleted files cannot In bethe recovered. Ensure the you files can haveuse already backup 1. Only front camera thumbnails will be display in Menu, if you choose to delete Note: / button to browse video files, select the video 1. Only4.frontPress camera thumbnails will be display in Menu, if you choose to delete 2.48 Deleted files cannot beand recovered. thefile. files have already switch the front rear lens Ensure recording before deletion. 48 backup before deletion. 48 47 DVR-5HD V1.0 04/17 4 Adjusting the Settings 4 Adjusting the Settings 4.14.1 UsingUsing the Menu the Menu You can generalsettings settings on-screen display You cancustomize customize the the general viavia thethe on-screen display (OSD) menus. (OSD) menus. Press button to enter OSD menu. to enter the the OSD menu. 1. 1. Press the the button / button button to select menu item, Press 2. 2. Press the the / to select menu item, and and thenthen press button enteringmenu. function menu. the the pressbutton to enter thefor function button to select or adjust value, Press 3. 3. Press the the / / button to select or adjust thethe value, andand then button to confirm setting. then press the press the button to confirm setting. button to return recording screen. 4. Press the 4. Press the button to return to the recording screen. 49 48 DVR-5HD V1.0 04/17 on this feature, it will display the satellite time preferentially, and cannot be manually changed. The system displays the Speed Unit Km/h / mph speedfor setting unit.of main menu and function list. Refer to the below table details If the Speed Cam Alert Menu option Description Available option function is enabled, once Select the location file category that Video / Parking Mode your car’s is File Playback want to by view. /On Emergency / Picture determined GPS and Speed Cam Alert you / Off Displays the acurrent approaches speed state cam,of Satellite Status the this satellite product reception. produces audible If theand satellite time is alert screen message. enabled, thePoint: drive recorder Add Speed The clock willpositioning synchronize satellite will according to the satellite time manually add speed camera Satellite zone youYou set. can When you On / Off location. add upturn to Synchronization Add Speed Point / on feature, it willlocations display Speed Position 200this speed camera Delete Last Position / the satellite Management to the built-intime system. Delete All Position preferentially, and cannot be Delete Last Position: Delete manually changed. the last speed camera point. The system displays the Delete All Position: Delete Speed Unit Km/h / mph speed setting unit.point. all speed camera Set a customized maximum Press the / speed limit. When the vehicle button to set the speed exceeds the speed limit. You can Speed Limit Alert maximum, an audible alert is set off, or set the automatically triggered and a speed limit from 50 to warning message is 200km/h (30 to displayed on the screen. 125mph) 4.2 Menu Items 50 Speed Limit Alert Set a customized maximum speed limit. When the vehicle speed exceeds the maximum, an audible alert is automatically triggered and a warning message is displayed on the screen. Press the / button to set the speed limit. You can set off, or set the speed limit from 50 to 200km/h (30 to 125mph) 50 49 DVR-5HD V1.0 04/17 Menu option Description Available option Set the time zone you are in. Press the / button to set the satellite time. You may customize it between GMT -12:00 ~ GMT +14:00 Set the date and time. Press the / button to adjust the value, and then press the button to set the next field, and complete setting Language setting. English / Deutsch / Nederlands / Français / Español / Italiano If the time stamp is enabled, recording files or photos will show the date and time. On / Off Setting of video resolution. 2K HD@30 (1440P 30fps) / FHD@60 (1080P 60fps) / FHD HDR (1080P HDR 30fps) / FHD@30 (1080P 30fps) / HD@120 (720P 120fps) Setting of exposure value. / Press the button to set the exposure value. It can be set between -2 ~ +2 LCD Setting Set LCD off time. Device screen will be off after a set time if no operation is detected during the standby or record mode. Press any button will switch it on. (Recording is not affected when screen is off). On / Off After 30 sec. / Off After 3 min. / Off Voice Record Setting for activating audio in the video. On / Off Set Timezone   Date / Time Language Settings Time Stamp Resolution EV 51 50 DVR-5HD V1.0 04/17 Menu option Volume Record Interval Description Available option Adjust the sound volume. / Press the button to set the volume. It can be set between 1 ~ 10 Save respective video files in a length of the selected duration. 1 min. / 3 min. Vibration Detection: If Vibration Detection is enabled, please disconnect the external power supply device in power on status, it will automatically power off and enter the detection mode after 10 seconds. The device will automatically power on and start recording when the device detects vibration.   Parking Mode Motion and Collision Detection: If Motion and Collision Detection is enabled, please disconnect the external power supply device in power on status, it will automatically power off and enter the detection mode after 10 seconds. The device will automatically power on and start recording when the device detects motion and collision. Vibration Detection / Motion and Collision Detection / Off Off: No parking monitoring activated. Collision Detec. If Collision Detection is activated, this device starts emergency recording once it detects any collision. High Sensitivity / Normal Sensitivity / Low Sensitivity / Off 52 51 DVR-5HD V1.0 04/17 Menu option WDR Driver Fatigue Alert Headlight Warning LDWS FCWS FCMD Description Present a crisp and clear picture quality with harmonious contrast in a high contrast, high discrepancy environment. When Driver Fatigue Alert is enabled, audible alert and screen message will be activated 1 hour after the device is powered on, with a repetition every 30 minutes. When Headlight is activated, device will issue an audible alert and screen message reminding that insufficient brightness is sensed on the recording face. Once your car’s location is determined by GPS and the LDWS function is enabled, this device produces audible alert and screen message when you drive off of or change lanes at speeds over 70 km/h (43 mph). When FCWS is activated after satellite positioning, device will issue audible alert and screen message when vehicle speed is above 60 km/h (37 mph) and the distance with the front vehicle is less than 15m. If FCMD function is enabled, the device will determine it from front car about 0.3 ~ 4 meters. When the front object moves about 3 ~ 5 seconds and the car did not start to drive forward, the device will issue audible alert and screen message. Available option On / Off On / Off On / Off On / Off On / Off On / Off 53 52 DVR-5HD V1.0 04/17 Menu option File Deletion Anti-flicker Format Default Setting Firmware Version Description Available option Delete the file(s). Video / Parking Mode / Emergency / Picture Domestic power supply varies by area. It is recommended that you should check the “Table of voltage and frequency of different countries” for the correct setting. 60Hz / 50Hz Format the memory card Format the memory card. inserted in the equipment. All All the files in the card the files in the card will be will be erased. erased. Yes / No The system reverts to the default setting. Yes / No Indicates the current firmware version. 54 53 DVR-5HD V1.0 04/17 5 Connecting to Other Devices 5 Connecting to Other 5.1 Connecting to the Computer Devices 5.1 Connecting Computer You can connect the deviceto tothe a desktop computer or notebook to can connect the device to a desktop computer or notebook to transferYou or view files. transfer or view files. 1. Connect micro micro USBUSB cable totothe micro 1. Connect cable the device device micro USBUSB port. port. 3.5 File 2. Connect the other end of USBPlayback cable to an available USB port of 2. Connect the other end of USB cable to an available USB port of your computer. your computer. 3.5.1 Playing Videos Playback video record files as follows: 1. Press button to enter the OSD menu. 3.5 FilethePlayback 2. Press the Videos / button to 3.5.1 Playing select File Playback, and then Playback videothe record files as follows: button for press entering function menu. 1. Press the button to enter the OSD menu. 3. on Power the device, the computer computer screen will show upshow the 3.  Power theon device, the will up the 3. the Press thedetects /yourscreen button to "Open message when computer device, select 2.thefiles", Press the detects / button to messagefolder when computer your device, select “Open to view or open the "Removable Disk", then users selectFile Video / Parking select Playback, andMode then / save the files to your computer. folder tocan view files”, orEmergency, open the “Removable Disk”, and then press thethen users can button for press the saveNote: the files to your computer. button for entering entering 1. This only indicates the device canfunction connect to menu. the computer; micro USB cable menu. not included in standard package. Note: 2. is Under dual-lens mode, the recording files will separately 3. Press the / be saved button to in different folders, "F" folder is for front camera files, "R" folder is for rear camera files. 1. This only indicates the device can connect to the computer; micro USB 3. If user only deletes select front camera files with on computer, Video / Parking Modethen / the rear cable iscamera not included files wouldinbestandard unavailable,package. also it couldn’t be overwritten by loop Emergency, and then press the recording. To avoid residual files occupy memory capacity, please delete separately the 2.  Under dual-lens mode, the recording files will be saved in files by computers, or format the memory card for by the device. Please refer to button entering different folders, folder is for front camera files, “R” folder is for rearselect Format (4.2). “F” / button to browse video files, 4. Press menu. 4. If user only deletes rear camera files with on computer, then the device cameracan files. button to enter Playback file andfiles then only review the front camera whichpress hasn’t been deleted. The micro USB cable will not supply the power to please power then on that 3. If user5. only deletes front camera files with on computer, the rear icon, it indicates the file is thumbnail shows the device, the device and make sure it has enough battery power, or take out the cameramemory files would be the unavailable, also it couldn’t be overwritten by loop card to read files. recording. In the Playback Mode, you can use recording. To avoid residual files memory capacity, please delete switch theoccupy front and rear lens recording file. 56 the files by computers, or format /the memory by the video device.files, Please button card to browse select th 4. Press refer to Format (4.2). file and then press button to enter Playback M 4. If user only deletes rearthumbnail camera files with on computer, then that the device icon, it indicates the file is d shows can only review the front camera files which hasn’t been deleted. b recording. In the Playback Mode, you can use 5. The micro USB cable will not supply theand power the device, please switch the front reartolens recording file. power on the device and make sure it has enough battery power, or take out the memory card to read the files.   5. Press the repetitively to return recording 54screen DVR-5HD V1.0 04/17 use to HDMI cable transfer to TV to play the file. / You can button Playback, and then 1. Power on the device. 5.2 Connecting to TV 5.2 to TV button for HDMI e 2. Connecting Connect cable to device You can use HDMI cable transfer playthe thefile. file. nctionYou menu. can useport. HDMI cable transfer to to TVTV totoplay HDMI 1.3.Power on the device. HDMI to TV HDMI 1.Connect Power on thecable device. button to port.Connect to device 2.  C2. onnect HDMI HDMI cable cable to device HDMI eo / Parking Mode / port. HDMI 3. Connect HDMI cable to TV HDMI port. / port. cy, and then the HDMI cable to TV HDMI 3. press Connect utton for entering port. 4.button Power  on TV, video switch TVselect signaltheinput to / to browse files, video TV screen will show icons,toIf HDMI, TV screen will button to switch enter Playback en press 4.HDMI, Power on TV, TV below signal Mode. input by device icon,operate it indicates that the fileplease is dual-lens shows please show below icons, operate by device / / / / buttons. button to In the Playback /Mode, / you / can use / buttons. 4. lens Power on TV,file. switch TV signal input to HDMI, TV screen will front and rear recording show Picture below icons, please operate by device Emergency Parking / Mode / Video / / buttons. Picture Emergency Parking Mode Video repetitively to return recording screen. Note: Note: 1. It only indicates this device can connect to TV, 43 HDMI cable is not included in 1. Istandard t only indicates package. this device can connect to TV, HDMI cable is not 2. included Please make the device power is on before using HDMI cable connecting in sure standard package. toNote: TV. 2. Please make sure the device using HDMI cable 1. It only indicates this device can power connect is to on TV,before HDMI cable is not included in standard package. connecting to TV. 57 2. Please make sure the device power is on before using HDMI cable connecting to TV. 57 55 DVR-5HD V1.0 04/17 6 Installing the Software 1. Place the attached CD ROM into the CD player. 2. If the CD does not execute automatically, please use Windows File Manager to execute the Install_CD.exe file in the CD. The following screen will be shown 3. Press the [Menu] item to start the installation process according to the instructions on-screen. Visit www.snooperneo.co.uk for the latest version of the Snooper Player and user guide. 56 DVR-5HD V1.0 04/17 7. Snooper Player 7 Snooper DVR 7 8 9 10 11 12 13 14 15 1 2 3 4 16 5 6 No. Item No. Item 1 Video Player 9 File Path 2 Play / Pause 10 Browser File 3 Previous 11 File List 4 Next 12 File Name 5 Stop 13 Volume 6 Google Maps 14 Playback Duration / Total Duration 7 Compass 15 Signal Noise Ratio (SNR) 8 Speed Meter 16 G-Sensor Note: 1. To display the route on Google Maps, please make sure the internet is connected before starting the video playback. 2. Video files of front camera (MOV) and GPS/G-Sensor files (NMEA) must be stored in the same folder before starting the playback. 3. The Snooper DVR software is only applicable to Windows operating system. 58 57 DVR-5HD V1.0 04/17 8 Specifications 8 Specifications Item   Image Sensor Effective Pixels Storage Media LCD Display Lens Focus Range Satellite System Movie Clip Description Front 1/3” CMOS sensor Camera Rear 1/2.7” CMOS sensor Camera Front 2688 (H) x 1520 (V) Camera Rear 1920 (H) x 1080 (V) Camera Support SDHC class 10 and 16GB microSD card (up to 32GB) 3.0" TFT LCD color screen Front Wide Angle Fixed Focus lens F1.8, f=2.94mm Camera Rear Wide Angle Fixed Focus lens F2.0, f=3.8mm Camera Front 1.5m~Infinity Camera Rear 1.5m~Infinity Camera GPS Resolution: 2K HD@30 (1440P 30fps) / FHD@60 (1080P 60fps) / FHD HDR (1080P Front HDR 30fps) / FHD@30 (1080P 30fps) / Camera HD@120 (720P 120fps) Format: MOV Rear Resolution: FHD@30 (1080P 30fps) Camera Format: MOV 59 58 DVR-5HD V1.0 04/17 Item Still Image Shutter G-Sensor Description Resolution: 4M (2688 x 1520) Format: JPEG Electronic shutter Auto: 1/33, 120~1/30 sec. 3-Axis G-Force sensor ISO Auto White Balance Auto Microphone Yes Speaker Yes Interface Mini USB; Micro USB; Mini D Type HDMI Battery Built-in 470mAh Li-polymer rechargeable Operating Temperature 0° ~ 60° C Operating Humidity 20 ~ 70% RH Storage Temperature -20° ~ 70° C Dimensions 89 x 28.5 x 53 mm Weight Approx. 86g (without memory card) 60 59 DVR-5HD V1.0 04/17 10 Service Under Warranty Snooper comes with a standard 12 month manufacturer’s warranty. If, for some reason your unit requires service under warranty return Snooper by special delivery and in suitable packaging to: The Returns Dept., Performance Products Limited, Cleaver House, Sarus Court, Stuart Road, Manor Park, Runcorn WA7 1UL. Tel: 0333 121 2252 For further detail please visit: http://www.snooperneo.co.uk/Returns.cfm Enclose the following information: (a) Your name, address and a full description of the problem. (b) Telephone number where you can be reached during business hours. (c) Serial number of your unit. (d) Proof of Purchase PLEASE NOTE: We cannot process any warranty claims unless proof of purchase is provided. Please retain your receipt as a precaution. Full terms and conditions of warranty are available on request. Limited Warranty This Snooper product is warranted against all defects in materials and workmanship for a period of one (1) year from the date of original purchase, when purchased from an authorized Snooper dealer. ALL PURCHASES OF SNOOPER PRODUCTS FROM NON-AUTHORIZED SNOOPER DEALERS ARE SUBJECT TO FURTHER WARRANTY RESTRICTIONS AS DESCRIBED OVERLEAF. 60 DVR-5HD V1.0 04/17 The conditions of this Limited Warranty and the extent of responsibility of Performance Products Ltd (PPL) under this Limited Warranty are as follows : 1. This Limited Warranty will become void if service is performed by anyone other than an approved Snooper Warranty Service Centre that results in damage to the product. 2. This Limited Warranty does not apply to any product which has been subject to misuse, neglect or accident, or which has had the serial number altered, defaced or removed, or which has been connected, installed, adjusted or repaired, other than in accordance with the instructions provided by Snooper.   3. Should you have any difficulties with the performance of this product during the warranty period, please call Snooper or visit our web site http://www. snooperneo. co.uk. You may also contact Snooper Customer Services at the address listed below for any service help you may need with Snooper products. 4. PROOF OF DATE OF PURCHASE FROM AN AUTHORIZED SNOOPER DEALER WILL BE REQUIRED FOR ANY WARRANTY SERVICE OF THIS PRODUCT. 5. SNOOPER PRODUCTS PURCHASED FROM A SOURCE OTHER THAN AN AUTHORIZED SNOOPER DEALER, INCLUDING ANY AND ALL PURCHASES VIA THE INTERNET FROM A NON INTERNET AUTHORIZED SNOOPER DEALER, SHALL NOT BE COVERED BY ANY SNOOPER LIMITED WARRANTY TO THE EXTENT ALLOWED BY APPLICABLE LAW. 6. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM EU COUNTRY TO EU COUNTRY. 61 DVR-5HD V1.0 04/17 7. ALL IMPLIED WARRANTIES, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, SHALL HAVE NO GREATER DURATION THAN THE WARRANTY PERIOD SET FORTH ABOVE. UNDER NO CIRCUMSTANCES SHALL SNOOPER BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT. BECAUSE SOME EU COUNTRIES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. 8. Product must be shipped in its original carton or equivalent carton, fully insured, with shipping charges prepaid. Snooper will not assume any responsibility for any loss or damage incurred in shipping. 9. The sole responsibility of Snooper under this Limited Warranty shall be limited to the repair of the product or the replacement of the product only (whichever is deemed appropriate and at the sole discretion of Snooper). 10.  This Limited Warranty does not cover car static or other electrical interferences, labour costs or any other associated or incidental costs incurred for the removal or reinstallation of the unit for repair. 62 DVR-5HD V1.0 04/17 Copyright © 2016 All rights reserved. All other marks, products or company names mentioned in this guide are trademarks of their respective companies. DVR-5HD V1.0 04/17