Preview only show first 10 pages with watermark. For full document please download

Dvr128 En Manual

   EMBED


Share

Transcript

HD-128S H.264 Network Digital Video Recorder User Manual HD-128S H.264 Network Digital Video Recorder Content 1 Product introduction…………………………………………….……3 1.1 Product summary………………………………………………..…3 1.2 Technical data …………………………………………………..…3 2 Structure introduction……………………………………………..…4 2.1 Panel introduction……………………………………………….…4 2.2 Connection port……………………………………………….……5 2.3 Remote control………………………………………………..……6 2.4 Video system…………………………………………………….…7 3 Operation System introduction………………………….……….…8 3.1 Start/Stop DVR……………………………………………….….…8 3.2 Preview……………………………………………………..…….…8 3.3 Menu introduction……………………………………………….…9 3.3.1 Enter into menu…………………………………………….…9 3.3.2 Menu component………………………………………...……9 3.3.3 Exit menu…………………………………………………..…11 3.4 Main menu introduction……………………………………….…11 3.5 Video playback……………………………………………………11 3.5.1 Files searching…………………………………………….…12 3.5.2 Searching result……………………………………….…..…13 3.5.3 Playback tool control…………………………………..….…14 3.6 Manual record……………………………………………….……15 3.7 PTZ control……………………………………………………..…16 3.8 Menu…………………………………………………………….…17 3.8.1 Management tools………………………………………...…17 3.8.1.1 HDD management…………………………………...…17 3.8.1.2 Users management………………………….…………18 3.8.1.3 Restore default………………………………….………19 1 HD-128S H.264 Network Digital Video Recorder 3.8.1.4 Software undate………………………………...………19 3.8.1.5 Time setup………………………………………………20 3.8.1.6 Version information…………………………..…………20 3.8.2 System setup…………………………………………………20 3.8.2.1 System configuration……………………...……………21 3.8.2.2 Images setup……………………………………………23 3.8.2.3 Record protection…………………………………….…25 3.8.2.4 PTZ setup………………………………………….….…26 3.8.2.5 Video detection……………………………………….…28 3.9 Manual Record …………………………………………….…..29 3.10 Record and playback…………………………………………29 3.11 LOG information…………………………………………..…..29 3.12 Network setup………………………………………………...30 3.13 Record setup……………………………………………….....32 3.14 Close the system…………………………………………..…33 Client software manual………………………………………….….…34 1.1 The main page of the video monitoring………………….…..…35 1.2 Data rate option………………………………………….…….…36 1.3 PTZ control………………………………………………….….…36 1.4 Advanced setup box…………………………………………...…36 1.5 Talkback control………………………………………….….……37 1.6 Configuration…………………………………………………..…38 1.6.1 Sever parameter………………………………………….…38 1.6.2 Channel parameter setup……………………………….….39 1.6.3 Users parameter information…………………………….…40 1.6.4 Others…………………………………………………………41 1.7 Remote playback…………………………………………………42 How to update software………………………………………………43 1.1 How to use U disk update software in the machine…………..43 1.2 How to update the software on the network………..…………43 2 HD-128S 1 1.1 H.264 Network Digital Video Recorder Product introduction Product summary This equipment is a digital monitor and control product which is specially designed for security fields, it adopt standalone processor and standalone operation system, combining all kinds of latest technology in the IT field, such as video and audio compression/decompression, large capacity HDD recordin, TCP/IP network technology, Code solidified in FLASH,all of these make the system be steadier.The equipment including digital video&audio recording(DVR) and digital video&audio server(DVS) functions both independent working local,and connected internet be a strong security survellance net. Applied security and protection to bank, telecommunications,electronics, justice,traffic, subdistrict, factory, warehouse, water conservancy facilities and other fields,and department, etc. 1.2 Technical data • Operation system Embeded Linux operation system • System resources 4 channel CIF real time recording and network transmission at one time,1 channel or 4 channel CIF playback and 16 channel CIF/QCIF sub-bitstreams • Operation surface: Graphical • Vedio standard PAL、NTSC user mouse,keyboard on the panel and remote 3 interface,support HD-128S H.264 Network Digital Video Recorder • Video compression H.264 • Audio compression ADPCM • Record way • Record search Time search、Event search、channel search、LOG Manual、Time fixed、Alarm、Motion detection search • Backup way Network backup、USB backup、SATA burn • Video input 4 channel BNC • Video output 1 channel BNC,1 channel VGA output • Audio input 1 channel BNC • Audio output 1 channel BNC • Netvoice • Monitor resolution • Playback resolution PAL:352x288(CIF),NTSC:352x240(CIF) • Images control • Motion detection Support each single channel detection area (16 1 channel netvoice PAL:720x576(D1),NTSC:720x480(D1) 6 levels option ×16)and can setup multi-levels sensitivity • Images show 1、4 channels show • Record speed PAL:25fps(adjustable) NTSC:30fps(adjustable) • Video storage HDD,Network • Mobile standard Standard RTSP 3G mobile phone monitoring. • Local playback 1 or 4 channel playback at one time • PTZ Control RS485 • HDD port 1 SATA port (1500GB) • Network port RJ45 10M/100M auto Ethernet port • USB port 1 USB2.0 high speed port;1 USB1.1 port • Power supply 12V 4A 2 Structure introduction 4 HD-128S H.264 Network Digital Video Recorder 2.1 Panel introduction 2 4 5 6 7 9 8 14 1 3 10 11 1. MOTION LED 2. LINK LED 12 13 15 9. DOWN 10. RECROD 3. REC LED 11. PLAY 4. RUN LED 12. MENU 5. IR REMOTE WINDOW 13. ESC 6. LEFT 14. POWER 7. RIGHT 15. ENTER 8. UP 2.2 Connection port 3 1 2 6 4 5 8 7 12 9 10 11 1. VIDEO IN 7. USB2.0 PORT 2. VIDEO OUT 8. USB1.1 PORT 3. TALKBACK INPUT 9. VGA PORT 4. AUDIO IN 10.RS485 PORT 5. AUDIO OUT 11. POWER PORT 6. NETWORK PORT 12. IR IN 5 HD-128S H.264 Network Digital Video Recorder 1、POWER ON/OFF (Can not be used ) 2.3 Remote control 2、DIGITS,1---4 is also CHANNEL NUMBER 1 3、All Area 11 Selected (Motion Detect) 4 、 Backward, Forward, Previous, Next 2 12 3 4 5、AUDIO MUTE 6、RETURN 13 7、MENU 8 、 UP, DOWN, LEFT, 14 5 6 7 RIGHT, ENTER 15 9、 Channel 1-4 16 10、Aperture FOCUS 11、DEV:Press【DEV】key, 17 then input the DVR device number,press ENTER】to 8 save the setup.Then it’s valid to control the DVR. 9 10 12、QUAD 18 13、PTZ 19 14、Play,Frame,Pause, Stop 15、RECORD 16、Volume Adjustment 17、ESC 18、Auto matic lens open or close 19、LENS ZOOM 6 HD-128S H.264 Network Digital Video Recorder 1. Open remote control’s battery lid; 2. Pack into 2pcs AA batteries,make sure "+" and"-" ; 3. Close the battery lid. 2.3.2 Remote control corresponding number operation Press【DEV】key, then input the DVR device number (acquiescent device number is “255”,into management tool->modify in systems paramet),the device number MAX 255. Input three-digit device number, add 0 in front if there is no three-digit, press【ENTER】 key.According remote control function key to operate standalone DVR after finished corresponding number. 2.3.3 Remote turn on The state of divice is pitched on by remote control,keep pressing 【POWER】key and close device into standby state. The state of divice is not pitched on by remote control, 【POWER】key , Can not be used. 2.3.4 Remote control stop operating The state of divice is pitched on by remote control,press【DEV】 key,the remote control stop operating in standalone DVR control. 2.3.5 Remote control exceptional checking Battery’s "+" and "-" Battery’s power whether empty 7 HD-128S H.264 Network Digital Video Recorder 2.4 Video System Setup the video system on the video system switch of the equipment mainboard PAL: NTSC: 3 Operation System introduction 3.1 Start/Stop DVR Please confirm that the alternating current is matched with the DVR’s requirements. And make sure that the underground line is connected.When the power is connected,the DVR will turn the 【POWER】LED to green color,after entering the system,the RUN LED flashing on the panel is the normal condition.Long-press the (Note: The remote control on the 【POWER】 key to not be used as soft-switching machine keys.) 3.2 Preview When the device is startup normally, it will go to the previewing picture. On the page of previewing, you can see the data,time and 8 HD-128S H.264 Network Digital Video Recorder channel name. Press the channel button or click the mouse can change the channel directly and preview the single-channel screen.Then press the “QUAD” key or left-click the mouse to return to 4 channels previewing. 3.3 Menu introduction 3.3.1 Enter into menu Press【MENU】key to enter into the main menu interface.Press 【PLAY】key to enter into the playback interface. Press【REC】key to enter into the manual operation interface.Press【PTZ】key to enter into the PTZ control interface. 3.3.2 Menu component The menu component unit mainly has the following kinds: (1)Reelection Frame: Provide 2 choices, “√” indicates valid and “□” indicates invalid, use【ENTER】or【↑】, 【↓】to switch. For example:“Channel choose” and “Record type” reelection frame on the files search interface. (2)Selection Frame: Choose the targeted content from the bottom list of the system. Use【↑】, 【↓】 or left-click to choose the item. 9 HD-128S H.264 Network Digital Video Recorder For example, there is “storage equipment” selection frame on the files search interface. (3)List Frame: The search result will display in the list frame.Use【↑】, 【↓】which provides in the chosen list to choose one item. For example,press【ENTER】or left-click to play the video recording document.Right-click to select or cancel the video recording document in order to backup the document. (4)Edit frame: Inputting targeted item by the editing frame. For example: Input digits,English words,Chinese,etc on the “equipment name” eidit frame a) Change input type by 【FN】or left-click the “ ”,including digits,English words, punctuation marks and Chinese input way. b) After confirming the cursor position on the edit frame by the panel keyboard or 【←】、【→】,press“ENTER” or left-click,the keyboard will appear,then choose the targeted characters by the direction keys or left-click. c) Press 【SHIFT】 or left-click to delete the characters which are in the front of the cursor position. d) Press 【MENU】 or【ESC】 key to exit edit status. 10 HD-128S H.264 Network Digital Video Recorder (5)Button: For the implementation of a specific function or set into the second-level menu,press 【ENTER】or left-click to enter. 3.3.3 Exit menu Press【MENU】 【ESC】 , or left-click to exit menu mode and switch to multi-screens preview mode. Right-click to return to the last menu. 3.4 Main menu introduction Press 【MENU】 key or the right mouse button to pop-up the main menu, main menu consists of the following three components: Preview mode : In the menu column,you can select the corresponding screen preview mode. Shortcut menu:In the menu column, respectively have: video playback, manual recording, shortcut menu of PTZ control, you can directly emter the corresponding menu pages. Main menu:Click to enter in to it,there are management tools, system setup,LOG search and system closing interface and so on. 3.5 Video playback Click the “video playback” on the main menu to enter into the files search interface. 3.5.1 Files search 11 HD-128S H.264 Network Digital Video Recorder Select channel: Select the target channel you want to search, click the check box to choose. Video type:Select the video type which needs to search. "√"means to be checked; "□" means not to be selected. Time slice setup:input the start time and end time of the requiredvideoon the edit frame. Storage equipment:in the selection box select the target backup storage device. Files searching button: after finishing to setup the above searching conditions,click the button,the system will start to search the related video files and enter into the searching result interface. Note:if there are more than 4000 video files can meet the searching conditions,the system will only show the latest 4000 files.If you want to find the updated files,please revise the searching conditions. Time playback:playback the video files according to the setup start and end time(Don't differentiate video type. Playback tools control,please refer to 3.5.3. Time backup:Backup the video files to the pointed storage equipment according to the setup start and end time. 12 HD-128S H.264 Network Digital Video Recorder 3.5.2 Searching result After setup all the searching conditions,click the “files searching”button to enter into the searching result interface. Playback video files:locate the targeted file on the list frame by up/down key or moving the mouse.Click the 【ENTER】 or left-click to play the file. Page turning:the searching files will show by page,click Page Up Page Down keys or input the targeted page,then press the skip button to turn the pages,you can also turn the pages by the middle button of the mouse. Backup:locate the targeted file on the list frame by up/down key or moving the mouse,then select the【FN】 or right click the file,and select the targeted storage equipment on the storage equipment frame,then press the backup button,the selected video file will be backed-up in the targeted storage equipment. Cancel button:return to the last level menu. 3.5.3 Playback tool control Choose files playback or time playback,will enter into the video 13 HD-128S H.264 Network Digital Video Recorder playback interface. Playback Toolbar:playback toolbar will appear at the bottom of the playback interface,right-click to hide or show the toolbar.When multi screen playback at one time,after hiding the toolbar,then left-click to zoom or narrow the video on the related channel. Stop playing:Click ,system will stop playing and return to the playback interface. Pause/Play:Click to pause playing,click to go on playing。 Single frame playback:when on the pause mode,click to setup the single play, when click one time ,it will forward a frame. Slow playback:Click button to slow the playback,click one more time can setup the slow times. Fast playback:Click button to fast the playback,click one more time can setup the fast times. Last slice/next slice:click or ,when click last slice or next slice one time,then the playback progress will forward or backward 10%。 Close/Open voice:click or 14 to close or open the HD-128S H.264 Network Digital Video Recorder voice of the playback files. Playback status information:it shows play speed,play progress,played time and total video files time on the right of the playback toolbar. Exit play:Click“ESC” or to exit playback screen any time.when all the files play over,it will exit playback screen automatically. 3.6 Manual record Click the manual record on the main menu to enter into the setup interface. Press 【REC】 or click manual record on the main menu to enter into the setup interface. Manual record interface introduction Manual record operation interface is made of the following parts: Channel number:it’s corresponding with the video channel。 Channel Status:indicates the record status on the corresponding channel,when the satus led is green“ ”, it says unopen state of the video, the satus led is red " ",it says open state of the video;When there is a coil around the status led“ 15 ”,“ ” says the corresponding HD-128S H.264 Network Digital Video Recorder channel open the network video transmission.When the system is on recording status(Regardless of video type), “ ” will appear at the left corner of the channel preview screen,it says it’s recording now. All open/All stop button:click the button to stop or open the video setup of all channels. Return button:click return button to return to the manual recordinginterface and return to the main menu. Note:Manual starting video, only through the manual to stop, or video will continue all the time. 3.7 PTZ Control Click PTZ control on the main menu to enter into the setp interface. The main operation of the PTZ control are as following:direction control, horizontal scan,Zoom control,adjust the focal length, adjust aperture, PTZ speed. After switching the page,the preset points can be invoked;Start/stop automatically cruise; Sheffield control; Lighting control;Auxiliary equipment control. Note:the invoked preset points must be setted-up well, 16 HD-128S H.264 Network Digital Video Recorder cruising paith setup method please refer to 3.8.2.8 PTZ setup. One of the cruise path number is less than 2 digits, need to add “0” in the front of the corresponding cruise path number up to 2 digits. 3.8 Menu Click “Menu” to enter into the main menu interface,the first level menu is including:management tools,system setup,LOG search,close the system. 3.8.1 Management tools Including HDD management,users mansgement, Restore default, Clear alarm, Software undate,Time setup,Version information. 3.8.1.1 HDD management SATA:indicates the current system HDD information, “√” indicates HDD tested successfully;“X” indicates without HDD information. HDD format: Choose the targeted disk drives on the HDD selection frame, can view the corresponding information, click "format" button to appear confirmation page, click on the "ok" button to begin, HDD starts formatting, after HDD formatting completed, HDD can be used normally. Note:You need stop all the record before you format the disk. 17 HD-128S H.264 Network Digital Video Recorder 3.8.1.2 Users management Create users add, remove users and modify user information. (except the Admin,any other users are not entitled to setup the privileges of other users) Creat new user Enter into “users management” operation interface,click“add” button to enter into users add interface 1、Input new user name Input new user name on the users name edit frame(such as:user). Note:the inputing method please refer to 3.3.2(4). 2、setup new users’ password Choose “setup password” button on the “users add interface” ,input the new password on the password setup interfac,the password is within 6 digits. 3、Setup the permissions of the new users Setup the operation permissions of the new users on the "users add" interface, select from the corresponding reelection frame, “√” indicates users can use the permissions, “□” indicates the user cannot use the permissions. 4、Save the setup information of the new users 18 HD-128S H.264 Network Digital Video Recorder Click “Enter” button, the setup information of the new users Will be saved,if you click “cancel”,it won’t be saved. Revise users Enter into the “users management” interface,right-click or press“ENTER” on the panel in the users list,and click “revise” button and enter into the “Revise users” interface to revice the users’ information. Note:Admin can revise the others’permissions. Cancel the users Enter into the “users management” interface , right-click or press“ENTER” on the panel in the users list to choose the targeted user,then click “cancel” to cancel the user. 3.8.1.3 Restore default Set the system configuration parameters as the default, after restore recovery, the system will restart automatically. 3.8.1.4 Software update Choose “Software update” on the management tools interface to enter into the operation interface. Choose the targeted update on the update selection frame,then choose the update modes on the update ways frame: FTP and USB. USB update:Copy the required update files to the USB 19 root HD-128S H.264 Network Digital Video Recorder catalogue, insert USB, and then click “Enter” to update the system. FTP update:Put the required update files to the FTP root catalogue,setup the IP address as the pointed one,then press “Enter” to update the system. After finishing update,the system will restart automatically. Note:the main board update name should be: mainboard.bin ;When the system is updating,do not cut of the power supply, to invoid causing equipment malfunction. 3.8.1.5 Time setup Enter the system time page, input the correct date and time in the “Date”, “Time” frame,then press 【ESC】 to save or press 【ESC】 to cancel. 3.8.1.6 Version information Check equipment names, types, the version number and the relevant information. 3.8.2 System setup Choose the “System setup” to enter into the sub-menu on the main menu interface. 3.8.2.1 System configuration 20 HD-128S H.264 Network Digital Video Recorder Choose "system configuration" into setup interface on the system setup interface. Equipment number:When using remote to control the equipment operation, it is through the device to control and communication, remote control must be coressponding with and the equipment number to realize the remote operation. The setup of the Remote control ,Please refer to 2.3 remote introduction. Equipment name:Equipment name is normally definited as the monitoring area name, when remote access,can intuitivey find the visit point.The default equipment name is“NetDVR”。The editing method,please refer to 3.3.2(4). Equipment is full:Choose "cover", when all the hard disk recording inside the equipment is full, the system will cover the earliest video information to achieve the purpose to record in cycle. Lock time by keypad:When there is no operation within the locked time by keypad, the system will cancel the current unser automatically, need to login the system again to operate. Switch time:Switching time means the cycle time cycles what 21 HD-128S H.264 Network Digital Video Recorder the single-channel preview shows. Video system:The equipment spport PAL and NTSC video output.The default is “NTSC”.Setup method please refer to 2.4。 VGA resolution:users can adjust the VGA redolution according to the VGA monitor. Menu transparency : when the user access to the menu interface, by adjusting the transparency of the menu, can realize the transparency between preview screen and the menu. Language:According to the user's demand, can setup menu language types, can choose the simplified Chinese and English. Status:Setup if the the preview screen shows the record ways, status and the motion detection icons, when the mark change to “√”means showing status; when the mark change to “□”means non showing status; Channel preview screen icon at the left corner: “ ” the system is recording(regardless of video type). “ ”time fixed recording status. “ ”manual recording status. “ ”motion detection status. “ ”motion detection recording. When finish the setuo of this page, click "Enter" button to save 22 HD-128S H.264 Network Digital Video Recorder the setup information and exit; Click "cancel" button, will not save the setup information and exit. 3.8.2.2 Images setup Choose“Image setup” to enter into the setup interface. Channel choose:Choose the targeted channel and click options frame to choose. Channel name:In the edit box, users can edit channel name by thenselves.The editing method,please refer to 3.3.2.(4). Display name : “√” says display,“□” says no display 。 Click“position”button,enter into setup interface,setup through the panel direction key or mouse dragging the red channel name,after finishing setup,press“ENTER” button or the right key of the mouse to save and exit, “ESC” key meas do not save and exit. Display time : ““√” says display,“□” says no display 。 Click“position”button,enter into setup interface,setup through the panel direction key or mouse dragging the red channel name,after finishing setup,press“ENTER” button or the right key of the mouse to save and exit, “ESC” key meas do not save and exit. Image specification:Setup the brightness, contrast, hue and saturation,use 【↑】【↓】key on the panel or mouse dragging to adjust. Use default:Through click this button, can setup the image parameter to system default values(Only limited to the restored image parameter). Cover:In the "cover" options,marks setup as "√" to activate the “area” button, enter into cover area setup interface. Setup cover area:In the cover areas setup interface, the area 23 HD-128S H.264 Network Digital Video Recorder center displays a yellow box, that is the area setup box. Area create: Move the yellow box to the start position of the setup area through the panel direction key,press the 【FN】button (switch the yellow box and red box) to change it to the red box (red box is the effective cover area); Then adjust the size by the direction key, the minimum size of the area can be set to one small box, the max size can set to 4 covered area. Left-click or long pressing the mouse to select the area, after finishing the setup ,press "ENTER" or click the middle mouse button to exit and save, press "ESC" key means not to save and exit. Local clear: Move the yellow box to the required clearing area (top left), press 【FN】button, it’s changed into black box (eliminate area box), local is cleared. After finishing the clearing , press【ENTER】to save and exit.If press 【ESC】,the clearing setup will be invalid.Left-click or long pressing the left mouse key to clear the area in the red box, click the middle mouse key to exit and save. All clear: press【MENU】to clear all the covred area in the channel. 24 HD-128S H.264 Network Digital Video Recorder Copy to::At the right selection frame of the copy to button, choose the targeted channel,click the “Copy to” button,system will apply the current channel setup information to other targeted video channel. Note:the channel name can not be copied. After this page setup is completed, click "Enter" button, save the setup information and exit, Click "Cancel" button, the setup information will not be saved and then exit. 3.8.2.3 Record protection Choose the “record protection” to enter into the setup interface. Choose channel:choose the targeted channel,click the selection frame to choose. Week:choose which day need to setup,can setup separatedly; “All”says all the dates. Recording type and time slice:In the four periods, each period can set different types, fixed time record (red), motion record (green), alarm record(yellow). "√"says enabled, "□" says invalid. The time status will display in the below, the whole plan of 0 to 24 hours. Copy to:At the right selection frame of the copy to button,choose the targeted channel,click the “Copy to” button,system will apply the current channel setup information to other targeted video channel. After this page setup is completed, click "Enter" button, save the setup information and exit, Click "Cancel"button, the setup information will not be saved and then exit. 25 HD-128S H.264 Network Digital Video Recorder 3.8.2.4 PTZ setup Choose the “PTZ detection” to enter into the setup interface. Choose channel:choose the targeted channel,click the selection frame to choose. Speed: choose the rate which is matching connected PTZ. Data bits: choose the data bits which is matching connected PTZ. Stop bits: choose the stop bits which is matching connected PTZ. Calibration: choose the calibration which is matching connected PTZ. Flow control: the chosen item should be the same with the matching PTZ flow control setup. Protocol type: the chosen item should be the same with the matching PTZ protocol setup. Decoders address: input the specified codec decoders address. Setup Preset point: Preset point is to setup the camera position, focus, zoom and lens in advance and memory them,and use a numbers to remark the setup. Add Preset point:Input a preset point in the preset points edit box, the range is 1-128, then through the direction key to adjust camera to the targeted 26 HD-128S H.264 Network Digital Video Recorder position, after adjusting,the preset point will be saved. Delete preset point: input a preset point in the edit control will delete the preset enter, click "delete". Cruise path is in certain speed camera, the path through more orderly, cruise, each cruise points include preset and stay time, so the set consists of cruise path, cruise, retention time and preset parameters such as a cruising speed of setup, in "Settings" interface can be setup the corresponding information. Now a equipment support 16 cruise path of setup. Cruise path setup: cruise path is an path that the camera is running with the certain speed, the path pass several cruise points with serial number, each cruise point include preset point and stay time, so the setup of the cruise path includes cruise point, preset point,retention time and cruise speed parameters setup. in "setup" interface can set the corresponding information. Now each equipment can Tracking setup: tracking which is used to record an irregular 27 HD-128S H.264 Network Digital Video Recorder movement lines of the camera which is defined inadvance, enter "Settings" can setup the tracking. Copy to:At the right selection frame of the copy to button,choose the targeted channel,click the “Copy to” button,system will apply the current channel setup information to other targeted video channel. After this page setup is completed, click "Enter" button, save the setup information and exit, Click "Cancel"button, the setup information will not be saved and then exit. 3.8.2.5 Video detection Choose the “video detection” to enter into the setup interface. Choose channel:choose the targeted channel,click the selection frame to choose. Type:can choose motion detection and video lost. Alarm output:setup the specified number of alarm output channel when the alarm input need to trigger. Buzzer:Whether need to trigger the buzzer to alrm or not. “√” says open,“□” says invalid. Time delaying:After finishing the detection sigal,setup the delaying time of the required items which need to deal with. Area:setup motion detection area,setup method,please refer to 3.8.2.3. Sensitivity: choose the trigger motion detection sensitivity. If 28 HD-128S H.264 Network Digital Video Recorder choose "Don't test" ,then the above setup parametera are invalid. Video Channel:setup the specified number of video channel when the alarm input need to trigger. Copy to:At the right selection frame of the copy to button,choose the targeted channel,click the “Copy to” button,system will apply the current channel setup information to other targeted video channel. After this page setup is completed, click "Enter" button, save the setup information and exit, Click "Cancel"button, the setup information will not be saved and then exit. 3.9 Manual Record Please refer to the 3.6 manual record. 3.10 Manual playback Please refer to the 3.5 playback. 3.11 LOG information Choose “LOG search” to enter into the setup interface on the menu. Main type:choose the required searching LOG type on the selection frame. Time setup:Input the view time slice in the editing frame,the related LOG information will show in the bellowing LOG list.Input the targeted page the page through the pages frame, click "enter " to turn the pages, or rolling alt-middle to turn the pages. 29 HD-128S H.264 Network Digital Video Recorder 3.12 Network Setup In the system setup interface, choose "network setup" and enter into its setup interface,there are " Ethernet, PPPOE ,DDNS" configuration. Ethernet configuration: in the network configuration interface, choose "Ethernet configuration" into its setup interface. Physical address: show the physical address. Port number:Port number must be more than or equal to 2000. IP address:The IP address must be only, it can not the same with the segment of the host or have any other conflicts. Subnet mask: use in the molecular segments. The default gateway: realize the communication between the different network, need to setup gateway address. DNS address:After the equipment use PPPoE agreement to access network,, will get dynamic IP address. DHCP:Choose whether to enable DHCP automatic acquisition IP. http port:IE browser port, the default port is 80. After this page setup is completed, click "Enter" button, save the setup information and exit, Click "Cancel"button, the setup information will not be saved and then exit. PPPOE configuration: in the network configuration, choose 30 HD-128S H.264 Network Digital Video Recorder "PPPOE configuration" and enter into its setup interface. Start: "√" says start the PPPoE dial-up Internet protocol," □ " says can not start the PPPoE dial-up Internet protocol. User name and password: in the edit box,input the user name and password which is provided by ISP. Please refer to 3.3.2 (4). After this page setup is completed, click "Enter" button, save the setup information and exit, Click "Cancel" button, the setup information will not be saved and then exit. DDNS configuration: in the network configuration interface, choose "DDNS configuration" into its setup interface. Start: "√" says start the DNNS, " □ " says will not start the DNNS. Service provider:choose the corresponding service provider. User name,password and domain:in the editing frame, input the user name,password and domain which apply from the internet.Editing method,please refer to 3.3.2(4). After this page setup is completed, click "Enter" button, save the setup information and exit, Click "Cancel"button, the setup information will not be saved and then exit. 3.13 Record Setup In the system setup interface, choose "record setup" into its 31 HD-128S H.264 Network Digital Video Recorder setup interface. Channel choose:Choose the targeted channel which need to setup, click selection frame to choose. Streaming: choose streaming which need to setup, they are "Mainstream" and "sub-stream " Streaming types:Choose the required video streaming type, " video streaming " indicates when the system is recording,it only encode the video;"Composite stream" indicates when the system is recording,it can encode both the video and audio; Bit rate type: Users can setup "fixed bitrate" and "variable bit rate", "fixed bitrate" says system encode the images according to the rate setting and video frame rate;"Variable bitrate," says system encode according to the image quality and video frame rate,but the rate will be adjusted by the system automatically according to video scene. Bit rate cap:Users choose the encoding rate according to their requirement. The higher the rate is, the better the image quality is, but also occupy hard disk space more. Video frames:Users choose the video frames according to their 32 HD-128S H.264 Network Digital Video Recorder requirement. The higher the frames is, the more smooth the image is, but also occupy hard disk space more. Copy to:At the right selection frame of the copy to button,choose the targeted channel,click the “Copy to” button,system will apply the current channel setup information to other targeted video channel. After this page setup is completed, click "Enter" button, save the setup information and exit, Click "Cancel"button, the setup information will not be saved and then exit. 3.14 Close System In the main menu interface, choose "close system" and enter into the operation interface.Choose the corresponding operation items on the selection box. Cancellation of users: For the cancellation of the curretnt users. After the cancellation, if you want to continue to use the equipment, need to login system again. Reboot: Restart the quipment, after confirmation,the equipment will be restarted. Close system: If you want close equipment,you should cut of the power supply. 33 HD-128S H.264 Network Digital Video Recorder Client software manual When using the PC client soft,please setup as following: 1 .The IE setup: if you use it at the first time, and unable to load control, need setup IE as following: tools —> Internet options —>security - Internet—> User-defined level —>select ActiveX and plugin for opening, finally click [Enter]. Login: open IE and input IP address which is setup by host network in the address bar (Factory default IP address is http://192.168.1.23), enter login page, the diagram as below. Enter your user name and password, the user name and password is the same with the mainframe, input the correct user information,then land in successful. 34 HD-128S 1.1 H.264 Network Digital Video Recorder The main page of the video monitoring After logging in,the main monitoring page is made of preview window, PTZ control, preview mode, streaming selection, channels open, interphone open, configuration, playback, user cancellation. As shown in figure 1-1. 图 1-1 Open the preview: in the preview window, left-click to select the targeted channel (when channel box is red,it’s namely selected.), double-click the channel number in the channel open box, can be open or close the video images which is corresponding with the preview window, shows close. shows open, Preview mode: click or double-click the preview window screen to switch the single picture preview or more pictures preview in the preview mode switch box, 35 HD-128S H.264 Network Digital Video Recorder 1.2 Data rate option This equipment support double stream, select the stream type of video preview in streaming box. 1.3 PTZ Control PTZ direction control button, can control PTZ A、 operation direction via the up,down,left, right. B、 The aperture button, can control PTZ aperture by increase and decrease C、 be far and near. Focus button, can control PTZ focus by adjust to D、 Variable times button, can control PTZ position by pull ing away and close. 1.4 Advanced setup box When the preview window open video preview, this function is activated. In the corresponding channel preview window, click the right mouse button to open advanced setup dialog box: Open/close voice: open or close the preview channel audio by this button. Screenshots: intercept the current video pictures and save them as image format. Please refer to 1.5.5 for the directory saving setup. Record: open the remote recording of this channel video and save it. Please refer to 1.5.5 for the directory saving setup. PTZ setup: setup PTZ preset point, cruise path, track.Please 36 HD-128S H.264 Network Digital Video Recorder refer to 3.8.2.8 for the method of PTZ setup. OSD setup:setup OSD layer channels, time reality position, and click the mouse to save. The motion detection: Setup motion detection area: First, “√” display the motion detecting area,choose "Add area" and hold the mouse drag on the screen ,then appears white mesh shape line,that is motion detection area;Choose "clear area", hold the the left mouse button to drag on screen of the white mesh shape line area,then the white mesh shape line is diappear,and the motion detection area is canceld.Choose the corresponding parameter on the sensitivity and output delay box. Screen adjusting : Setup the brightness, contrast, hue and saturation of the images, left-click the mouse or drag to adjust, exit and save automatically. 1.5 Talkback Control Click to open voice and start speech intercom aggressively. 37 HD-128S H.264 Network Digital Video Recorder 1.6 Configuration 1.6.1 Sever paramete 图 1-6-1 In the setup interface, setup the related parameters of the host.As shown in figure 1-6-1. Set the same parameters as the host, setting method and matters needing attention,please refer to the host system configuration, system information, network operating instructions. 38 HD-128S H.264 Network Digital Video Recorder 1.6.2 Channel parameter setup 图 1-6-2 In the setup interface, setup the related parameters of the host.As shown in figure 1-6-2. Set the same parameters as the host, setting method and matters needing attention,please refer to the host system images setup, recording setup, PTZ setup operating instructions. 39 HD-128S H.264 Network Digital Video Recorder 1.6.4 Users parameter information 图 1-6-3 Setup the users information of the equipment.Set the same parameters as the host, setting method and matters needing attention,please refer to the host users management operating instructions. 40 HD-128S H.264 Network Digital Video Recorder 1.6.5 Others 图 1-6-4 In the setup interface, setup the related parameters of the host.As shown in figure 1-5-5. Set the same parameters as the host, setting method and matters needing attention,please refer to the manual record, date and time,HDD management,clear alarm,LOG search,software update, restoring default setup operating instructions. Video and captured picture saving directory: setup the save path of the video and captured picture. 41 HD-128S H.264 Network Digital Video Recorder 1.7 Remote playback Choose playback channel number, recording type, time condition and click the search button, the left frame will display a list of search results. Can flip or input page to jump to view video files (one page display 20 files information and most support 4,000). Files playback: choose the targeted files on the searching list frame,double-click the file or click the “file playback” button,start to playback at the right playback window, the playback control is the same as the host. Time playback: click the " time playback" button, playback window will start playing video file with the start time setup. Files download: click the “files download” button to select the targeted file in the search list frame, after setting the saving path and start to download the targeted file, the progress bar in the below will display download progress status of the file. 42 HD-128S H.264 Network Digital Video Recorder How to update software 1.1 How to use U disk update software in the machine? If you want to update software in the machine, you should insert U disk into the USB port, then setup as following: Menuà ToolsàUpgrade(Fig.1)àOK (Fig.2) Fig.1 : Fig.2 : Note: System cann’t upgrade when recording. 1.2 How to update the software on the network? If you want to update the software on Open the IE Control Interface, then setup the as network? following: Configureà others(Fig.1)àUpdate(Fig.2)àBrowse (Download the file when you will want to upgrade.)àStart 43 HD-128S H.264 Network Digital Video Recorder Fig.1 : Fig.2 : Note: A. You have to wait about 3 minutes when the system upgrading. B. You cann’t cut power when system upgrading. 44 HD-128S H.264 Network Digital Video Recorder Changes may be made in this manual without obligation to notify any person of such revisions or changes. The company reserves the rights of final interpretation of the manual. 45