Transcript
Driver Specification Sheet
Model No:
DX25BG60-04
3
Rev:
Product Line: Tymphany
Last Update: 2015-09-16 19:30:08
Product Description This DX family tweeter features a 4 ohm 25 mm ferrofluid-cooled voice coil, a damped silk diaphragm with large surround roll to produce a low resonant frequency, and a big ferrite magnet motor for power handling capacity. The faceplate features recessed mounting holes to minimize reflections.
Mechanical Drawing
Specifications DC Resistance Minimum Impedance Voice Coil Inductance Resonant Frequency Mechanical Q Factor Electrical Q Factor Total Q Factor Ratio Fs/Qts Half Space Sensitivity @2.83V Half Space Sensitivity @1W/1M Gap Height Maximum Linear Excursion Ferrofluid Type Driver Mass
Revc Zmin Le Fs Qms Qes Qts F
[email protected]/1M db@1W/1M Gh Xmax FF Kg
Ohms Ohms mH Hz
3.47 4.25 0.01 415.36 1.4
5.0% 7.5% 15%
0.48 Fs/Qts dB dB mm mm
0.35 1186.74 93.99 91.2 2 0.1
+/- 1.0db +/- 1.0db
Energy Bandwidth Product Moving Mass Suspension Compliance Effective Cone diameter Effective Piston Area Effective Volume Motor Force Factor Motor Efficiency Factor Voice coil former Material Voice coil inner diameter Rated Noise Power Test Spectrum Bandwidth Driver Size
0.8
Frequency and Impedance Response
Tymphany HK LTD Address : Room 1307-8 Dominion Centre, 43-59 Queens Rd East, Wanchai, Hong Kong E-mail:
[email protected]
EBP Mms Cms D Sd Vas BL ß VCfm VCd P 2.5kHz - 20kHz Inch
(1/Qes)*fs g um/N cm cm^2 L Tm (T*M^2)/Ohms mm W 25 mm
0.3 475 3.2 8 0.04 2.46 1.7 ASV 25.76 80
