Transcript
Doosan Infracore Construction Equipment
DX60R - DX80R TECHNICAL DATA
DX60R - DX80R GENERAL SPECIFICATIONS ITEMS
UNIT
MODEL NUMBER OF CYLINDERS
ENGINE
57.8 / 2,000
39 / 2,200
42.5 / 2,000
RATED FLYWHEEL POWER (hp PER SAE J1349) NET
hp / rpm
50.7 / 2,200
54.9 / 2,000
kW / rpm
37.3 / 2,200
40.4 / 2,000
ft. lb. / rpm
151.9 / 1,400
182.7 / 1,300
Nm / rpm
205.9 / 1,400
247.7 / 1,300
MAXIMUM TORQUE (GROSS) (SAE J1995)
in.³
203
203
cc
3,319
3,319
in. x in.
3.9 x 4.3
3.9 x 4.3
mm x mm
98 x 110
98 x 110
STARTER
V / kW
12 V, 3 kW
12 V, 3 kW
BATTERIES
V / AH
1 x 12 V x 100 AH
1 x 12 V x 100 AH
Double element with auto dust evacuation.
Double element with auto dust evacuation.
MAXIMUM FLOW PILOT PUMP (GEAR DESIGN) RELIEF PRESSURE BOOM/ARM/BUCKET (NORMAL MODE) TRAVEL SWING
REFILL CAPACITIES FINAL DRIVE (EACH SIDE) HYDRAULIC SYSTEM HYDRAULIC TANK
US gal.
20.6
30.6
L
78
116
qt.
5.25
4.6
L
4.97
4.36
qt.
12.3
12.3
L
11.6
11.6
qt.
1.48
1.16
L
1.4
1.1
US gal.
27.7
29.9
L
105
113
US gal.
17.2
23
L
65
87
WEIGHT DX60R
DX80R
38
BOOM
9' 6" (2,900 mm)
BOOM
11' 1" (3,380 mm)
144
BUCKET
0.229 yd.³ (0.175 m³)
BUCKET
0.366 yd.³ (0.28 m³)
US gpm
2.6
5.8
L / min.
9.9
22
psi
469
512
bar
32.4
35
psi
3,271
4,061
bar
226
280
psi
3,271
4,061
bar
226
280
psi
2,987
4,061
bar
206
280
1 each track (STD. Shoes)
1 each track (STD. Shoes)
5 each track
5 each track
40 each track (Triple Grouser)
39 each track (Triple Grouser)
6' 6"
7' 3"
mm
1,990
2,200
SOUND LEVEL (2000/14/EC)
dB(A)
97
98
CABIN SOUND LEVEL (ISO 6396)
dB(A)
77
77
SWING SPEED
rpm
0 - 9.6
0 - 9.6
mph
2.4 / 1.3
2.9 / 1.8
km / h.
3.9 / 2.1
4.6 / 2.9
lb.
11,023
13,669
kg
5,000
6,200
%
58
58
°
30
30
MAXIMUM GRADE
ENGINE OIL
DX80R
2 x 13
ft. in.
DRAWBAR PULL
COOLING SYSTEM (RADIATOR CAPACITY)
DX60R
2 x 49.3
NUMBER OF SHOES (LINKS PER SIDE)
TRAVEL SPEED (FAST/SLOW)
FUEL TANK
UNIT
L / min.
LOWER ROLLERS
TOTAL LENGTH OF TRACK
ITEMS
US gpm
UPPER ROLLERS
DRIVE SYSTEM
4
53 / 2,200
MAIN PUMPS – 2 VARIABLE DISPLACEMENT AXIAL PISTON PUMPS MAX. FLOW
SWING MECHANISM
Yanmar 4TNV98-ZWDB8
4 hp / rpm
AIR CLEANER
ENVIRONMENT
Yanmar 4TNV98-ESDB6
kW / rpm
BORE AND STROKE
UNDERCARRIAGE
DX80R
RATED FLYWHEEL POWER (hp PER SAE J1995) GROSS
PISTON DISPLACEMENT
MAXIMUM SYSTEM PRESSURE
DX60R
SHOE WIDTH 15.7" (400 mm) Triple Grouser 15.7" (400 mm) Rubber Track
ARM TYPE
OPERATING WEIGHT
GROUND PRESSURE
4' 10" (1,480 mm)
13,283 lb. (6,025 kg)
4.84 psi (0.33 bar)
6' 3" (1,900 mm)
13,536 lb. (6,140 kg)
4.98 psi (0.34 bar)
4' 10" (1,480 mm)
12,952 lb. (5,875 kg)
4.69 psi (0.32 bar)
6' 3" (1,900 mm)
13,206 lb. (5,990 kg)
4.84 psi (0.33 bar)
SHOE WIDTH 17.7" (450 mm) Triple Grouser 17.7" (450 mm) Rubber Track
ARM TYPE
OPERATING WEIGHT
GROUND PRESSURE
5' 7" (1,700 mm)
18,475 lb. (8,380 kg)
5.55 psi (0.38 bar)
7' 5" (2,250 mm)
18,607 lb. (8,440 kg)
5.55 psi (0.38 bar)
5' 7" (1,700 mm)
18,365 lb. (8,330 kg)
5.55 psi (0.38 bar)
7' 5" (2,250 mm)
18,497 lb. (8,390 kg)
5.55 psi (0.38 bar)
HYDRAULIC CYLINDERS The piston rods and cylinder bodies are made of high-strength steel. A shock absorbing mechanism is fitted in all cylinders to ensure shock-free operation and extend piston life.
The piston rods and cylinder bodies are made of high-strength steel. A shock absorbing mechanism is fitted in all cylinders to ensure shock-free operation and extend piston life.
DX60R CYLINDERS
QUANITY
BOOM
1
ARM
DX80R BORE x ROD DIAMETER x STROKE
CYLINDERS
QUANITY
BORE x ROD DIAMETER x STROKE
4.1" x 2.4" x 2' 5" (105 x 60 x 731 mm)
BOOM
1
4.5" x 3.0" x 2' 7" (115 x 75 x 775 mm)
1
3.3" x 2.2" x 2' 8" (85 x 55 x 811 mm)
ARM
1
4.0" x 2.6" x 2' 10" (100 x 65 x 866 mm)
BUCKET
1
3.1" x 2.0" x 2' (80 x 50 x 600 mm)
BUCKET
1
3.3" x 2.2" x 2' 3" (85 x 55 x 690 mm)
DOZER
1
4.0" x 2.4" x 7.2" (100 x 60 x 183 mm)
DOZER
2
4.0" x 2.4" x 5.9" (100 x 60 x 149 mm)
BOOM SWING
1
4.3" x 2.2" x 1' 10" (110 x 55 x 550 mm)
BOOM SWING
1
4.3" x 2.4" x 2' 5" (110 x 60 x 738 mm)
14'3"
K C
DX60R - DX80R S
BUCKET
M
RECOMMENDATIONS WIDTH
CECE, HEAPED
WITHOUT SIDE CUTTERS
WITH SIDE CUTTERS
0.092 yd.³ (0.07 m³)
0.078 yd.³ (0.06 m³)
11.8" (300 mm)
14.3" (362 mm)
0.229 yd.³ (0.175 m³)
0.196 yd.³ (0.15 m³)
25.7" (654 mm)
28.5" (724 mm)
4' 10" (1,480 mm) ARM
6' 3" (1,900 mm) ARM
206 lb. (93.5 kg)
A
A
311 lb. (141 kg)
A
B
WITH SIDE CUTTERS
0.26 yd³ (0.20 m³)
0.24 yd³ (0.18 m³)
21.3" (540 mm)
25.4" (646 mm)
0.37 yd³ (0.28 m³)
0.31 yd³ (0.24 m³)
27.8" (707 mm)
32" (812 mm)
11' 1" (3,380 mm) BOOM 5' 7" (1,700 mm) ARM
7' 5" (2,250 mm) ARM
439.4 lb. (199.3 kg)
A
A
456 lb. (206.8 kg)
A
B
B. Suitable for materials with density of 1,600 kg•m³ (2,700 lb. / yd.³) or less C. Suitable for materials with density of 1,100 kg•m³ (1,850 lb. / yd.³) or less
DIGGING FORCE (ISO) DX60R
DX60R 0.229 yd.³ (0.175 m³)
8,973 lbf.
8,973 lbf.
DIGGING FORCE
4,070 kgf.
4,070 kgf.
39.9 kN
39.9 kN
ARM
DIGGING FORCE
DX80R BUCKET (PCSA)
DIGGING FORCE
4' 10" (1,480 mm) ARM
6' 3" (1,900 mm) ARM
5,842 lbf.
5,071 lbf.
2,650 kgf.
2,300 kgf.
26.0 kN
22.6 kN
DX80R
0.26 yd.³ (0.20 m³)
0.37 yd.³ (0.28 m³)
12,346 lbf.
12,346 lbf.
5,600 kgf.
5,600 kgf.
54.9 kN
54.9 kN
N
Q
L O
F
P
BOOM TYPE
BUCKET (PCSA)
DIGGING FORCE
DX80R
9' 6" (2,900 mm) BOOM
BUCKET TYPE (SAE)
11' 1" (3,380 mm) BOOM
J 14'3"
K
4' 10" (1,480 mm) ARM
6' 3" (1,900 mm) ARM
5' 7" (1,700 mm) ARM
7' 5" (2,250 mm) ARM
0.229 yd.³ (0.175 m³)
0.229 yd.³ (0.175 m³)
0.37 yd.³ (0.28 m³)
0.26 yd.³ (0.20 m³) ←
C
OVERALL WIDTH OF UPPER STRUCTURE
A
6' 4" (1,930 mm)
←
7' 5" (2,266 mm)
CAB WIDTH
B
3' 5" (1,030 mm)
←
3' 5" (1,030 mm)
DISTANCE FROM CABIN TO COUNTERWEIGHT
C
2' 11" (900 mm)
HEIGHT FROM BONNET TO CABIN
D
OVERALL HEIGHT OF CAB
E
3' (927 mm)
M
←
H
R
N
Q
L
←O P
8' 4" (2,550 mm)
←
S
4' 1" (1,236 mm)
← ←
3' (923 mm)
A B
←
8' 8" (2,638 mm)
←
D
OVERALL TRACK WIDTH
F
6' 6" (1,980 mm)
←
7' 7" (2,300 mm)
←
TRACK SHOE WIDTH
G
1' 4" (400 mm)
←
E 1' 6" (450 mm)
←
GROUND CLEARANCE
H
1' 1" (320 mm)
←
1' 2" (362 mm)
←
I
1' 11" (580 mm)
←
2' 2" (648 mm)
TRACK HEIGHT
0.092 yd.³ (0.07 m³)
R
H
5'2"
ARM TYPE
A. Suitable for materials with density of 2,000 kg•m³ (3,370 lb. / yd.³) or less
BUCKET (PCSA)
M
I
DX60R
WEIGHT WITHOUT SIDE CUTTERS
H G
WIDTH
CECE, HEAPED
E S
RECOMMENDATIONS
SAE, HEAPED
C
B
P
14'3"
K
A
D
DX80R CAPACITY
J
Q
L O
9' 6" (2,900 mm) BOOM
WEIGHT SAE, HEAPED
R
N
DX60R CAPACITY
DIMENSIONS H
H 5'2" G
F
I
←
OVERALL LENGTH
J
18' 3" (5,565 mm)
18' 5" (5,620 mm)
20' 3" (6,167 mm)
20' 7" (6,267 mm)
TAIL LENGTH
K
3' 7" (1,102 mm)
←
4' 3" (1,298 mm)
←
TUMBLER DISTANCE
L
6' 6" (1,990 mm)
←
7' 3" (2,200 mm)
←
TAIL TO TRACK CLEARANCE
M
- 7" (- 168 mm)
←
- 3" (- 72 mm)
←
END DISTANCE OF TRACK
N
4' 2" (1,270 mm)
←
4' 6" (1,370 mm)
←
TRACK LENGTH
O
8' 4" (2,550 mm)
←
9' 3" (2,823 mm)
←
5' 7" (1,700 mm) ARM
7' 5" (2,250 mm) ARM
TRACK TO DOZER LENGTH
P
10' 1" (3,080 mm)
←
10' 9" (3,282 mm)
←
9,259 lbf.
7,716 lbf.
HEIGHT OF DOZER DOWN
Q
1' 4" (415 mm)
←
1' 0" (304 mm)
←
4,200 kgf.
3,500 kgf.
HEIGHT OF DOZER UP
R
1' 6" (446 mm)
←
34.3 kN
1' 5" (435 mm)
←
41.2 kN
BOOM HEIGHT
S
6' 1" (1,865 mm)
7' 2" (2,188 mm)
6' 10" (2,085 mm)
7' 11" (2,409 mm)
DX60R - DX80R WORKING RANGE
NOTES DX60R 9' 6" (2,900 mm) BOOM
BOOM TYPE ARM TYPE BUCKET TYPE (SAE)
4' 10" (1,480 mm) ARM
6' 3" (1,900 mm) ARM
0.229 yd.³ (0.175 m³)
0.229 yd.³ (0.175 m³)
MAX. DIGGING REACH
A
20' 1" (6,130 mm)
21' 4" (6,500 mm)
MAX. VERTICAL WALL
B
10' 2" (3,095 mm)
10' 5" (3,165 mm)
MAX. DIGGING DEPTH
C
12' 3" (3,725 mm)
13' 7" (4,145 mm)
MAX. DUMP HEIGHT
D
12' 11" (3,940 mm)
13' 6" (4,125 mm)
MAX. DIGGING HEIGHT
E
18' 8" (5,685 mm)
19' 2" (5,853 mm)
MIN. SWING RADIUS
F
7' 11" (2,415 mm)
8' 2" (2,500 mm)
DX80R 11' 1" (3,380 mm) BOOM
BOOM TYPE ARM TYPE BUCKET TYPE (SAE)
5' 7" (1,700 mm) ARM
7' 5" (2,250 mm) ARM
0.37 yd.³ (0.28 m³)
0.26 yd.³ (0.20 m³)
MAX. DIGGING REACH
A
22' 8" (6,915 mm)
24' 5" (7,431 mm)
MAX. VERTICAL WALL DEPTH
B
10' 8" (3,246 mm)
12' 4" (3,759 mm)
MAX. DIGGING DEPTH
C
13' 9" (4,180 mm)
15' 6" (4,729 mm)
MAX. LOADING HEIGHT
D
15' 3" (4,640 mm)
16' 5" (4,992 mm)
MAX. DIGGING HEIGHT
E
21' 9" (6,625 mm)
22' 11" (6,975 mm)
MIN. SWING RADIUS
F
8' 4" (2,548 mm)
8' 8" (2,633 mm)
DX60R - DX80R STANDARD EQUIPMENT DX60R ENGINE:
− Reclining, Height Adjustable
UNDERCARRIAGE:
Yanmar 4TNV98:
− Fully Adjustable Arm Rests
Track Adjusters
− Naturally Aspirated, Direct Injection
− Tilting / Sliding Control Console
Track Rollers:
202.5 cu.in., 4 Cylinder
− Load Adjustment Knob
− (1) Upper, (5) Lower Each Side
50.7 net Flywheel Horsepower @ 2,200 rpm
− Suspension
Triple Grouser Shoes
Radiator Reserve Tank
Skylight
− 40 Each Side, (400 mm) Width
Electric Engine Speed Control
Slide-Up Front Window
Dozer, Front (1) Cylinder: 6' 6" x 1' 2" (1980 x 350mm)
HYDRAULIC SYSTEM: Control Valve: − Pilot Operated, (12) Spools
Sliding Side Windows Travel Control: Hand Levers / Foot Pedals Emergency Breakout Tool
OTHER STANDARD EQUIPMENT: Joystick Pattern Change Valve Air Cleaner (Dual Filter)
Main Pump:
ELECTRICAL:
Counterweight:
− Tandem Variable Piston+Gear (2-13+9.4 US gpm)
Alternator:
− 1,765 lb. (800 kg.)
− Pressure Setting 230 kgf. / cm2 (3,271) psi for Implements
− 60 Amp
Sealed Pins and Bucket Linkages
− Pressure Setting 210 kgf. / cm2 (2,990) psi for Swing
Batteries:
Joystick Levers with 3 Switches
− Boom Swing and Dozer
− (1) 12V, 100 Amp Hrs, 750 CCA ea.
Dozer Blade
Pilot Circuit:
Starter:
Joystick Lever, Dozer
− Gear Type Pump (2.6 US gpm)
− 12V, 3.0 kW
Swing Boom (Left: 70 Degrees, Right: 50 Degrees)
Swing Motor
Horn
Control Pedal, Swing Boom, Tilting
− Axial Piston Type, 2 Stage Planetary
Lights:
Manuals:
− Swing Speed Control up to 9.6 rpm
− (2) Boom
− Parts, Operation & Maintenance Manual
− Parking Brake
− (1) Cabin (Opt.)
Travel Motors:
Alarm Buzzer for:
− Axial Piston, Planetary
− Engine Overheat
Travel Speed (High / Low), 2.4 mph / 1.3 mph
− Engine Oil Pressure
Parking Brake
− Overload (Opt.)
Extra Auxiliary Spool
Electronic Monitor for:
Overload Relief Valves
− Engine Oil Pressure Warning
Main Relief Valves
− Charge Warning
ADDITIONAL OPTIONS - FACTORY INSTALLED
Hydraulic Kit for 1-Way Applications with Piping to Arm End
− Engine Coolant Temperature Warning
Lock Valve
CAB: Steel, All Weather Air Conditioner with Heater, R134a Refrigerant AM/FM Stereo Radio (Std.), with Cassette (Opt.) Cigarette Lighter Cab Door Lock Front Windshield Wiper with Washer Safety Glass, Tinted Controls : − Safety Lock Lever Seat: − Deluxe Reclining with Seat Belt (2" Wide)
− Air Cleaner Clogging Warning − Fuel Level Warning − Preheat Indicator − High Travel Indicator
OPTIONAL EQUIPMENT DX60R DOOSAN BUCKET - FACTORY INSTALLED 29" 0.175 mm (0.23 yd.3)
GEITH COUPLERS - DEALER INSTALLED Hydraulic Quick Coupler Manual Quick Coupler
− Engine Check Warning
GEITH THUMBS - DEALER INSTALLED
− Working Light Indicator
Hydraulic Direct Mount Thumb
− Overload Warning
Mechanical Thumb
− Water In Fuel Warning − Quick Clamp Indicator
HYDRAULIC KITS - DEALER INSTALLED
Instrumentation:
Breaker / Thumb (BT) Single & Double Acting HKX
− Water Temperature Gauge − Fuel Gauge − Hour Meter
OTHER - ADDITIONAL OPTIONS - DEALER INSTALLED 3" Seat Belt
DX60R - DX80R STANDARD EQUIPMENT DX80R ENGINE:
− Fully Adjustable Arm Rests
UNDERCARRIAGE:
Yanmar 4TNV98:
− Tilting / Sliding Control Console
Track Adjusters
− Naturally Aspirated, Direct Injection
− Load Adjustment Knob
Track Rollers:
202.5 cu.in., 4 Cylinder
− Suspension
− (1) Upper, (5) Lower Each Side
54.9 Net Flywheel Horsepower @ 2,000 rpm
Skylight
Triple Grouser Shoes
Radiator Reserve Tank
Slide-Up Front Window
39 Each Side, (450 mm) Width
Electric Engine Speed Control
Sliding Side Windows
Dozer, Front (1) Cylinder: 7' 7" x 1' 5" (2300 x 440 mm)
HYDRAULIC SYSTEM: Control Valve:
Travel Control: Hand Levers / Foot pedals Emergency Breakout Tool
OTHER STANDARD EQUIPMENT: Joystick Pattern Change Valve
− Pilot Operated, (9) Spools
ELECTRICAL:
Air Cleaner (Dual Filter)
Main Pump:
Alternator:
Counterweight:
− Load Sensing Tandem Variable Piston (38 US gpm)
− 60 Amp
− 2,805 lb. (1,273 kg.)
Pressure Setting 300 kgf. / cm2(4,061) psi
Batteries:
Sealed Pins and Bucket Linkages
Pilot Circuit:
− (1) 12V, 100 Amp Hrs, 750 CCA ea.
Joystick Levers with 3 Switches
− Gear Type Pump (5.8 US gpm)
Starter:
Dozer Blade
Swing Motor:
− 12V, 3.0 kW
Joystick Lever, Dozer
− Axial Piston Type, 2 Stage Planetary
Horn
Swing Boom (Left: 71 Degrees, Right: 54 Degrees)
Swing Speed Control up to 9.6 rpm
Lights:
Control Pedal, Swing Boom, Breaker
Parking Brake
− (2) Boom
Manuals:
Travel Motors:
− (1) Cabin (Opt.)
− Parts, Operation & Maintenance Manual
− Axial Piston, 3 Stage Planetary
Alarm Buzzer for:
Travel Speed (High / Low), 2.9 mph / 1.8 mph
− Engine Overheat
Parking Brake
− Engine Oil Pressure
Extra Auxiliary Spool
− Overload (Opt.)
Overload Relief Valves
Electronic Monitor for:
Main Relief Valves
− Engine Oil Pressure Warning
Load Sensing System
− Charge Warning
Combination Hydraulic Kit for 1-Way or 2-Way Applications with Piping to Arm End
− Engine Coolant Temperature Warning
ADDITIONAL OPTIONS - FACTORY INSTALLED
− Air Cleaner Clogging Warning
Lock Valve
with One / Two Way Selection Valve CAB: Steel, All Weather Air Conditioner with Heater, R134a Refrigerant AM/FM Stereo Radio (Std.), with Cassette (Opt.) Cigarette Lighter Cab Door Lock Front Windshield Wiper with Washer Safety Glass, Tinted Controls - Safety Lock Lever Seat: − Deluxe Reclining with Seat Belt (2" Wide) − Reclining, Height Adjustable
− Fuel Level Warning − Preheat Indicator − High Travel Indicator − Engine Check Warning
OPTIONAL EQUIPMENT DX80R DOOSAN BUCKET - FACTORY INSTALLED 32" 0.24 mm (0.31 yd.3)
GEITH COUPLERS - DEALER INSTALLED Hydraulic Quick Coupler Manual Quick Coupler
− Working Light Indicator
GEITH THUMBS - DEALER INSTALLED
− Overload Warning
Hydraulic Direct Mount Thumb
− Water in Fuel Warning
Mechanical Thumb
− Quick Clamp Indicator Instrumentation:
OTHER - ADDITIONAL OPTIONS - DEALER INSTALLED
− Water Temperature Gauge
3" Seat Belt
− Fuel Gauge − Hour Meter
DX60R - DX80R LIFTING CAPACITY (DX60R) Boom: 9'6" (2,900 mm)
Boom: 9'6" (2,900 mm)
Arm: 4'10" (1,480 mm)
Arm: 4'10" (1,480 mm)
Bucket: SAE .24 yd³ (.18 m³)
Bucket: SAE .24 yd³ (.18 m³)
Rubber Shoe: 15.75" (400 mm)
Rubber Shoe: 15.75" (400 mm)
Counterweight: .89 ton (.81 metric ton)
Counterweight: .89 ton (.81 metric ton)
Dozer Up
Dozer Down
Unit: 1,000 lb.
Feet
10
A (ft.)
15
MAX. REACH
4.64 4.43 4.45
2.63 2.55 2.47
1.64 1.47 1.48
3.27* 2.42 2.09 2.14 2.72
1 0.93 0.86
1.52 0.9 0.74 0.75 0.96
Metric 2
A (m)
3
4
B (m) 4 3 2 1 0 (GROUND) -1 -2
2.81* 3.73*
1.22 1.26
2.22 2.11 2.06 2.06 2.09
0.81 0.72 0.68 0.68 0.7
1.39* 1.40* 1.43 1.38 1.35 1.34
0.58 0.57 0.53 0.49 0.47 0.46
1.02 1 0.99
A (ft.)
B (ft.)
11.66 15.77 17.15 16.66 14.05
15 10 5 0 (GROUND) -5
Unit: 1,000 kg MAX. REACH
5
0.37 0.36 0.35
1.35* 1.09 0.97 0.94 0.97 1.1 1.46
0.53 0.4 0.35 0.33 0.34 0.38 0.51
5. THE TOTAL MASS OF MACHINE IS 5,900 kg INCLUDED IN THIS MASS BOOM 2.90 m, ARM 1.48 m, 805 kg COUNTERWEIGHT, BUCKET WEIGHT 0 kg, ALL OPERATING FLUIDS AND A 75 kg OPERATOR. 6. LIFT CAPACITIES ARE IN COMPLIANCE WITH ISO 10567.
MAX. REACH
5.40* 6.56* 5.63*
2.92* 3.34* 3.71*
3.12 2.92 2.94
3.12* 2.61* 2.65* 3.13* 3.30*
1.83 1.76 1.68
2.72 1.68 1.44 1.46 1.85
Metric 2
A (m) B (m)
4.17 4.83 5.16 5.24 5.08 4.65 3.83
4 3 2 1 0 (GROUND) -1 -2
3
4
11.66 15.77 17.15 16.66 14.05
Unit: 1,000 kg MAX. REACH
5
A (m)
2.70* 3.55*
2.58 2.63
2.13* 2.84* 3.05* 2.86* 2.24*
1.5 1.4 1.36 1.35 1.38
1.32* 1.34* 1.58* 1.85* 2.01* 1.93*
1.03 1.02 0.99 0.94 0.91 0.91
1.38* 1.46* 1.49*
0.71 0.69 0.68
1.29* 1.18* 1.18* 1.25* 1.42* 1.49* 1.48*
0.96 0.75 0.67 0.64 0.66 0.75 0.99
4.17 4.83 5.16 5.24 5.08 4.65 3.83
1. LOAD POINT IS THE END OF THE ARM. 2. CAPACITIES MARKED WITH AN ASTERISK (*) ARE LIMITED BY HYDRAULIC CAPACITIES.
2. CAPACITIES MARKED WITH AN ASTERISK (*) ARE LIMITED BY HYDRAULIC CAPACITIES. 4. THE LEAST STABLE POSITION IS OVER THE SIDE.
15
A (ft.)
A (m)
1. LOAD POINT IS THE END OF THE ARM. 3. LIFT CAPACITIES SHOWN DO NOT EXCEED 75% OF MINIMUM TIPPING LOADS OR 87 % OF HYDRAULIC CAPACITIES.
10
A (ft.)
B (ft.) 15 10 5 0 (GROUND) -5
Unit: 1,000 lb.
Feet
: Rating Over Front : Rating Over Side or 360 degree
3. LIFT CAPACITIES SHOWN DO NOT EXCEED 75% OF MINIMUM TIPPING LOADS OR 87 % OF HYDRAULIC CAPACITIES. 4. THE LEAST STABLE POSITION IS OVER THE SIDE. 5. THE TOTAL MASS OF MACHINE IS 5,900 kg INCLUDED IN THIS MASS BOOM 2.90 m, ARM 1.48 m, 805 kg COUNTERWEIGHT, BUCKET WEIGHT 0 kg, ALL OPERATING FLUIDS AND A 75 kg OPERATOR. 6. LIFT CAPACITIES ARE IN COMPLIANCE WITH ISO 10567.
: Rating Over Front : Rating Over Side or 360 degree
DX60R - DX80R LIFTING CAPACITY (DX60R) Boom: 9'6" (2,900 mm)
Boom: 9'6" (2,900 mm)
Arm: 6'3" (1,900mm)
Arm: 6'3" (1,900mm)
Bucket: SAE .24 yd³ (.18 m³)
Bucket: SAE .24 yd³ (.18 m³)
Triple Grouser Shoe: 15.75" (400 mm)
Triple Grouser Shoe: 15.75" (400 mm)
Counterweight: .89 ton (.81 metric ton)
Counterweight: .89 ton (.81 metric ton)
Dozer Up
Dozer Down
Unit: 1,000 lb.
Feet
10
A (ft.)
15
MAX. REACH
4.7 4.4 4.36
2.63* 2.55 2.44 2.43
1.68 1.43 1.41
2.58* 2.14 1.88 1.91 2.31 3.06*
1.01 0.92 0.83 0.81
1.21 0.78 0.64 0.64 0.78 1.69
Metric 2
A (m)
3
4
B (m) 5 4 3 2 1 0 (GROUND) -1 -2 -3
1.34* 2.52* 4.21* 2.47*
1.15 1.16 1.19 1.27
1.82* 2.12 2.04 2.02 2.04
0.83 0.73 0.66 0.65 0.66
1.11* 1.18* 1.44 1.38 1.34 1.32 1.33
0.59 0.58 0.54 0.49 0.45 0.44 0.45
1.04 1.02 1 0.98 0.97
A (ft.)
B (ft.)
13.53 17.09 18.35 17.90 15.55 9.46
15 10 5 0 (GROUND) -5 -10
Unit: 1,000 kg MAX. REACH
5
0.38 0.37 0.35 0.33 0.32
1.28* 1.08* 0.96 0.87 0.84 0.87 0.96 1.19 1.41*
0.69 0.44 0.35 0.3 0.28 0.29 0.32 0.41 0.72
5. THE TOTAL MASS OF MACHINE IS 5,900 KG INCLUDED IN THIS MASS BOOM 2.90 M , ARM 1.90 M ,805 KG COUNTERWEIGHT, BUCKET WEIGHT 0 KG , ALL OPERATING FLUIDS AND A 75 KG OPERATOR. 6. LIFT CAPACITIES ARE IN COMPLIANCE WITH ISO 10567.
MAX. REACH
4.62* 6.39* 6.04*
2.50* 3.05* 3.60* 3.34*
3.17 2.89 2.86
2.46* 2.14* 2.19* 2.56* 3.08* 2.90*
1.84 1.75 1.65 1.64
2.17 1.48 1.28 1.29 1.56 2.90*
Metric 2
A (m) B (m)
3.59 4.64 5.23 5.53 5.60 5.46 5.07 4.35 2.99
5 4 3 2 1 0 (GROUND) -1 -2 -3
3
4
13.53 17.09 18.35 17.90 15.55 9.46
Unit: 1,000 kg MAX. REACH
5
A (m)
1.29* 2.42* 4.04* 2.34*
1.29* 2.42* 2.55 2.34*
1.73* 2.55* 2.98* 2.96* 2.55*
1.53 1.41 1.34 1.32 1.34
1.05* 1.13* 1.39* 1.71* 1.94* 1.97* 1.69*
1.05 1.03 0.99 0.94 0.9 0.88 0.89
1.16* 1.24* 1.37* 1.47* 1.41*
0.72 0.7 0.68 0.66 0.66
1.22* 1.03* 0.97* 0.97* 1.03* 1.16* 1.37* 1.42* 1.34*
1.22* 0.81 0.66 0.6 0.57 0.59 0.65 0.8 1.34*
3.59 4.64 5.23 5.53 5.60 5.46 5.07 4.35 2.99
1. LOAD POINT IS THE END OF THE ARM. 2. CAPACITIES MARKED WITH AN ASTERISK (*) ARE LIMITED BY HYDRAULIC CAPACITIES.
2. CAPACITIES MARKED WITH AN ASTERISK (*) ARE LIMITED BY HYDRAULIC CAPACITIES. 4. THE LEAST STABLE POSITION IS OVER THE SIDE.
15
A (ft.)
A (m)
1. LOAD POINT IS THE END OF THE ARM. 3. LIFT CAPACITIES SHOWN DO NOT EXCEED 75% OF MINIMUM TIPPING LOADS OR 87 % OF HYDRAULIC CAPACITIES.
10
A (ft.)
B (ft.) 15 10 5 0 (GROUND) -5 -10
Unit: 1,000 lb.
Feet
: Rating Over Front : Rating Over Side or 360 degree
3. LIFT CAPACITIES SHOWN DO NOT EXCEED 75% OF MINIMUM TIPPING LOADS OR 87 % OF HYDRAULIC CAPACITIES. 4. THE LEAST STABLE POSITION IS OVER THE SIDE. 5. THE TOTAL MASS OF MACHINE IS 5,900 KG INCLUDED IN THIS MASS BOOM 2.90 M , ARM 1.90 M ,805 KG COUNTERWEIGHT, BUCKET WEIGHT 0 KG , ALL OPERATING FLUIDS AND A 75 KG OPERATOR. 6. LIFT CAPACITIES ARE IN COMPLIANCE WITH ISO 10567.
: Rating Over Front : Rating Over Side or 360 degree
DX60R - DX80R LIFTING CAPACITY (DX80R) Boom: 11'1" (3,380 mm)
Boom: 11'1" (3,380 mm)
Arm: 5'7" (1,700 mm)
Arm: 5'7" (1,700 mm)
Bucket: SAE 0.37 yd³ (0.28 m³)
Bucket: SAE 0.37 yd³ (0.28 m³)
Shoe: 1'6" (450 mm)
Shoe: 1'6" (450 mm)
Counterweight: 1.4 ton (1.27 metric ton)
Counterweight: 1.4 ton (1.27 metric ton)
With Dozer
Without Dozer
Unit: 1,000 lb.
Feet
10
A (ft.)
15
20
MAX. REACH
B (ft.) 15 10 5 0 (GROUND) -5 -10
7.73* 10.58* 10.27* 7.46*
2.98* 3.48* 4.71* 5.77* 5.84*
5.49 5.05 4.97 5.08
2.98* 3.11 2.92 2.75 2.68
3.41* 3.74* 4.03*
2.79* 2.76* 3.00* 3.58* 4.07* 4.29*
1.89 1.83 1.76
2.31 1.8 1.62 1.65 1.92 2.93
Metric 2
A (m)
3
4
5
B (m) 5 4 3 2 1 0 (GROUND) -1 -2 -3
1.85* 3.04* 4.51* 5.84*
1.85 3.04 4.51 4.84
2.88* 4.26* 4.93* 4.94* 4.49* 3.51*
2.66 2.46 2.35 2.31 2.32 2.36
1.62* 2.16* 2.75* 3.15* 3.26* 3.05* 2.38*
1.62* 1.68 1.59 1.52 1.49 1.49 1.51
1. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
1.48* 1.43* 1.57* 1.83* 2.12* 2.33* 2.39* 2.19*
1.23 1.24 1.21 1.17 1.13 1.09 1.07 1.07
1.55* 1.65* 1.78* 1.86* 1.81*
0.88 0.86 0.84 0.82 0.81
1.30* 1.24* 1.25* 1.31* 1.43* 1.62* 1.80* 1.88* 1.95 *
1.17 0.93 0.81 0.75 0.73 0.75 0.81 0.95 1.3
10
A (ft.)
15
MAX. REACH
A (ft.)
B (ft.)
17.1 20.6 21.5 20.1 18.1 14.5
15
3.83*
3.15
3.59*
2.88
15.9
10
4.19*
3.09
3.58*
2.14
18.8
5.29* 6.04* 5.60*
2.93 2.8 2.77
3.98* 4.36* 4.63* 4.57*
1.91 1.96 2.37 4.4
19.8 19.1 16.6 11.3
Unit: 1,000 kg MAX. REACH
6
Unit: 1,000 lb.
Feet
A (ft.)
5 0 (GROUND) -5 -10
5.38 5.1 5.1 5.29
Metric 2
A (m)
A (m)
B (m)
5.14 5.84 6.27 6.48 6.51 6.36 6.01 5.41 4.45
5 4 3 2 1 0 (GROUND) -1 -2 -3
: Rating Over Front : Rating Over Side or 360 degree
9.36* 10.87* 9.61* 5.47*
3
4
Unit: 1,000 kg MAX. REACH
5
A (m)
1.95* 3.73* 5.75* 3.96*
1.95* 3.73* 4.89 3.96*
3.75* 4.93* 4.97* 4.76* 4.05* 2.63*
2.59 2.43 2.37 2.36 2.39 2.46
1.71* 1.71* 2.04* 2.55* 3.05* 3.30* 3.24* 2.81*
1. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
2. *RATED LOADS ARE BASED ON HYDRAULIC CAPACIT Y.
2. *RATED LOADS ARE BASED ON HYDRAULIC CAPACIT Y.
3. RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC CAPACIT Y OR 75% OF TIPPING CAPACIT Y.
3. RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC CAPACIT Y OR 75% OF TIPPING CAPACIT Y.
1.71* 1.71* 1.74 1.66 1.59 1.54 1.53 1.54
1.75* 1.85* 2.07* 2.30* 2.43* 2.36*
1.23 1.21 1.18 1.14 1.11 1.1
1.68* 1.60* 1.63* 1.73* 1.90* 1.98* 2.06* 2.13* 2.09*
1.51 1.13 0.96 0.88 0.86 0.89 0.98 1.21 1.92
4.41 5.23 5.71 5.95 5.98 5.81 5.42 4.73 3.52
: Rating Over Front : Rating Over Side or 360 degree
DX60R - DX80R LIFTING CAPACITY (DX80R) Boom: 11'1" (3,380 mm)
Boom: 11'1" (3,380 mm)
Long Arm: 5'7" (2,250 mm)
Long Arm: 5'7" (2,250 mm)
Bucket: SAE 0.37 yd³ (0.28 m³)
Bucket: SAE 0.37 yd³ (0.28 m³)
Shoe: 1'6" (450 mm)
Shoe: 1'6" (450 mm)
Counterweight: 1.4 ton (1.27 metric ton)
Counterweight: 1.4 ton (1.27 metric ton)
With Dozer
Without Dozer
Feet
5
A (ft.)
10
15
Unit: 1,000 lb. MAX. REACH
20
B (ft.) 15 10 5 0 (GROUND) -5 -10
*4.78 *8.72 *13.92
*7.10 *9.64 *9.27 *6.55
*4.78 *8.72 *13.92
*7.10 6.72 6.59 *6.55
1
2
*2.16 *2.95 *3.96 *5.19
*2.16 *2.95 *3.96 *5.19
*2.45 *3.56 *4.92 *4.65
*2.45 *3.56 *4.92 *4.65
*2.44 *3.58 *4.11 *4.10 *3.69 *2.81
*2.39
17.99
15
2.43
*2.29
*2.29
20.51
10
*4.25 *5.19 *5.22 *3.69
3.80 3.53 3.41 *3.69
*3.33 *3.57 *3.57
2.34 2.24 2.43
*2.45 *2.92
2.07 2.09
21.39 20.87 18.80 14.38
5 0 (GROUND) -5 -10
5
Unit: 1,000 kg MAX. REACH
6
*1.80 *2.27 *2.60 *2.68 *2.48 *1.87
1. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
*1.80 2.07 1.97 1.92 1.91 *1.87
*1.23 *1.18 *1.29 *1.50 *1.73 *1.90 *1.94 *1.75 *1.51
*1.23 *1.18 *1.29 *1.50 1.45 1.39 1.36 1.35 *1.51
*1.03 *0.96 *1.25 *1.33 *1.43 *1.50 *1.44 *1.49
*1.03 *0.96 1.14 1.11 1.07 1.04 1.03 1.21
*0.95 *0.98 *1.06 *1.21 *1.43
*0.95 0.96 0.93 0.95 1.03
15
Unit: 1,000 lb. MAX. REACH
20
4.78* 8.72* 13.92*
7.10* 9.64* 9.27* 6.55*
4.78* 8.72* 13.92*
7.10* 6.72 6.59 6.55*
2.39*
2.39*
3.16*
3.16*
3.03*
2.43
2.29*
2.29*
20.51
17.99
4.25* 5.19* 5.22* 3.69*
3.80 3.53 3.41 3.69*
3.33* 3.57* 3.57*
2.34 2.24 2.43
2.45* 2.92*
2.07 2.09
21.39 20.87 18.80 14.38
Metric 1
A (m)
A (m)
B (m)
5.14 5.84 6.27 6.48 6.51 6.36 6.01 5.41 4.45
5 4 3 2 1 0 (GROUND) -1 -2 -3
: Rating Over Front : Rating Over Side or 360 degree
10
A (ft.)
*3.03
4
*2.44 3.31 3.13 3.07 3.08 *2.81
B (ft.)
*2.39
B (m) 5 4 3 2 1 0 (GROUND) -1 -2 -3
A (ft.) *3.16
3
5
A (ft.)
*3.16
Metric A (m)
Feet
2
3
4
5
Unit: 1,000 kg MAX. REACH
6
A (m)
2.29* 3.14* 4.23* 5.54*
2.29* 3.14* 4.23* 5.54*
2.61* 3.79* 5.25* 5.12*
2.61* 3.79* 4.84 4.98
2.66* 2.86 2.69 2.63 2.64 2.70
2.66* 2.50 2.33 2.28 2.29 2.35
1.94 1.80 1.70 1.64 1.64 1.68
1. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
2. *RATED LOADS ARE BASED ON HYDRAULIC CAPACIT Y.
2. *RATED LOADS ARE BASED ON HYDRAULIC CAPACIT Y.
3. RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC CAPACIT Y OR 75% OF TIPPING CAPACIT Y.
3. RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC CAPACIT Y OR 75% OF TIPPING CAPACIT Y.
1.73 1.60 1.50 1.45 1.44 1.48
1.35* 1.29* 1.39 1.32 1.25 1.20 1.16 1.16 1.43
1.28 1.28 1.25 1.19 1.12 1.06 1.03 1.03 1.27
1.13* 1.05 0.98 0.95 0.92 0.89 0.88 1.03
1.13* 0.94 0.88 0.85 0.82 0.79 0.78 0.92
0.90 0.82 0.79 0.81 0.87
0.80 0.73 0.70 0.72 0.77
5.14 5.84 6.27 6.48 6.51 6.36 6.01 5.41 4.45
: Rating Over Front : Rating Over Side or 360 degree
DX60R - DX80R LIFTING CAPACITY (DX80R) Boom: 11'1" (3,380 mm)
Boom: 11'1" (3,380 mm)
Long Arm: 5'7" (1,700 mm)
Long Arm: 5'7" (1,700 mm)
Bucket: SAE 0.37 yd³ (0.28 m³)
Bucket: SAE 0.37 yd³ (0.28 m³)
Rubber Shoe: 1'6" (450 mm)
Rubber Shoe: 1'6" (450 mm)
Counterweight: 1.4 ton (1.27 metric ton)
Counterweight: 1.4 ton (1.27 metric ton)
With Dozer
Without Dozer
Unit: 1,000 lb.
Feet
1.181
A (ft.)
157.5
196.9
Unit: 1,000 lb.
Feet
1.181
A (ft.)
B (ft.)
A (ft.)
157.5
196.9
B (ft.)
A (ft.)
1.969
3.76*
3.66
3.83*
3.17
14.07
1.969
3.76*
3.66
3.64
3.17
@14.07
1.575
3.68*
3.68*
3.65*
2.40
3.41*
2.27
16.83
1.575
3.68
3.68*
2.73
2.40
2.58
2.27
@16.83
4.32* 5.31* 6.17* 6.5* 6.21* 5.07*
3.57 3.37 3.15 3.02 3.00 3.04
3.79* 4.18* 4.58* 4.73* 4.43*
2.38 2.29 2.20 2.14 2.12
3.3* 3.39* 3.68* 3.81* 3.85* 3.76* 2.99*
1.87 1.70 1.63 1.70 1.92 2.47 2.99*
18.43 19.22 19.32 18.76 17.42 15.12 10.95
1.181 0.787 0.394 0(GROUND) -0.394 -0.787 -1.181
4.08 3.86 3.64 3.51 3.48 3.53
3.57 3.37 3.15 3.02 3.00 3.04
2.71 2.62 2.54 2.45 2.43
2.38 2.29 2.20 2.14 2.12
2.14 1.94 1.87 1.96 2.20 2.84 2.99*
1.87 1.70 1.63 1.70 1.92 2.47 2.99*
@18.43 @19.22 @19.32 @18.76 @17.42 @15.12 @10.95
1.181 0.787 0.394 0(GROUND) -0.394 -0.787 -1.181
5.46* 6.98* 7.93* 9.85* 8.99* 7.29* 3.74*
5.46* 5.34 4.87 4.76 4.76 4.87 3.74*
Metric
Unit: 1,000 kg 3
A (m)
4
5
2.48* 3.17* 3.60* 4.47* 4.08* 3.31* 1.70*
2.48* 2.42 2.21 2.16 2.16 2.21 1.70*
1.71* 1.67* 1.96* 2.41* 2.80* 2.95* 2.82* 2.30*
1.66 1.67* 1.62 1.53 1.43 1.37 1.36 1.38
1. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
1.66* 1.72* 1.90* 2.08* 2.15* 2.01*
1.09 1.08 1.04 1.00 0.97 0.96
1.74* 1.55* 1.50* 1.54* 1.67* 1.73* 1.75* 1.71* 1.36*
1.44 1.03 0.85 0.77 0.74 0.77 0.87 1.12 1.36*
Unit: 1,000 kg 3
A (m) A (m)
B (m)
4.29 5.13 5.62 5.86 5.89 5.72 5.31 4.61 3.34
5 4 3 2 1 0(GROUND) -1 -2 -3
: Rating Over Front : Rating Over Side or 360 degree
5.46* 5.34 4.87 4.76 4.76 4.87 3.74*
Metric
MAX. REACH
B (m) 5 4 3 2 1 0(GROUND) -1 -2 -3
5.46* 6.26 5.75 5.64 5.64 5.75 3.74*
4
5
MAX. REACH A (m)
2.48* 2.84 2.61 2.56 2.56 2.61 1.70*
2.48* 2.42 2.21 2.16 2.16 2.21 1.70*
1.71* 1.67 1.85 1.75 1.65 1.59 1.58 1.60
1.66 1.67* 1.62 1.53 1.43 1.37 1.36 1.38
1. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
2. *RATED LOADS ARE BASED ON HYDRAULIC CAPACIT Y.
2. *RATED LOADS ARE BASED ON HYDRAULIC CAPACIT Y.
3. RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC CAPACIT Y OR 75% OF TIPPING CAPACIT Y.
3. RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC CAPACIT Y OR 75% OF TIPPING CAPACIT Y.
1.24 1.23 1.19 1.15 1.11 1.10
1.09 1.08 1.04 1.00 0.97 0.96
1.65 1.17 0.97 0.88 0.85 0.89 1.00 1.29 1.36*
1.44 1.03 0.85 0.77 0.74 0.77 0.87 1.12 1.36*
@ 4.29 @ 5.13 @ 5.62 @ 5.86 @ 5.89 @ 5.72 @ 5.31 @ 4.61 @ 3.34
: Rating Over Front : Rating Over Side or 360 degree
DX60R - DX80R LIFTING CAPACITY (DX80R) Boom: 11'1" (3,380 mm)
Boom: 11'1" (3,380 mm)
Long Arm: 5'7" (2,250 mm)
Long Arm: 5'7" (2,250 mm)
Bucket: SAE 0.37 yd³ (0.28 m³)
Bucket: SAE 0.37 yd³ (0.28 m³)
Rubber Shoe: 1'6" (450 mm)
Rubber Shoe: 1'6" (450 mm)
Counterweight: 1.4 ton (1.27 metric ton)
Counterweight: 1.4 ton (1.27 metric ton)
With Dozer
Without Dozer
Unit: 1,000 lb.
Feet
118.1
A (ft.)
157.5
196.9
236.2
Unit: 1,000 lb.
Feet
118.1
A (ft.)
B (ft.)
A (ft.)
157.5
196.9
236.2
B (ft.)
A (ft.)
1.969
2.77*
2.40
2.71*
2.38
16.46
1.969
2.73
2.40
2.71
2.38
16.46
1.575
2.95*
2.45
2.46*
1.81
18.79
1.575
2.80
2.45
2.07
1.81
18.79
3.21* 3.7* 4.21* 4.56* 4.56* 3.92*
2.40 2.29 2.16 2.05 2.01 2.03
2.44* 2.46* 2.64* 2.97* 3.37* 3.41* 3.24*
1.52 1.39 1.34 1.37 1.52 1.85 2.71
20.24 20.93 21.03 20.53 19.35 17.32 14
1.181 0.787 0.394 0(GR) -0.394 -0.787 -1.181
2.73 2.62 2.49 2.38 2.31 2.34
2.40 2.29 2.16 2.05 2.01 2.03
1.76 1.61 1.54 1.61 1.76 2.16 3.15
1.52 1.39 1.34 1.37 1.52 1.85 2.71
20.24 20.93 21.03 20.53 19.35 17.32 14
1.181 0.787 0.394 0(GR) -0.394 -0.787 -1.181
6.45* 8.92* 9.81* 9.52* 8.35* 5.99*
5.56 4.96 4.67 4.61 4.65 4.81
3.48* 4.54* 5.62* 6.26* 6.3* 5.68* 3.88*
3.48* 3.40 3.15 2.95 2.87 2.89 3.00
*3.1* *3.26* *3.46* *3.54*
1.63 1.59 1.54 1.48
Metric 3
A (m)
4
5
Unit: 1,000 kg MAX. REACH
6
B (m) 5 4 3 2 1 0(GROUND) -1 -2 -3
2.93* 4.05* 4.45* 4.32* 3.79* 2.72*
2.52 2.25 2.12 2.09 2.11 2.18
1.58* 2.06* 2.55* 2.84* 2.86* 2.58* 1.76*
1.58* 1.54 1.43 1.34 1.30 1.31 1.36
1.26* 1.34* 1.46* 1.68* 1.91* 2.07* 2.07* 1.78*
1. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
1.09 1.11 1.09 1.04 0.98 0.93 0.91 0.92
1.41* 1.48* 1.57* 1.61*
0.74 0.72 0.70 0.67
1.23* 1.12* 1.11* 1.12* 1.20* 1.35* 1.53* 1.55* 1.47*
1.08 0.82 0.69 0.63 0.61 0.62 0.69 0.84 1.23
6.45* 5.86 5.56 5.47 5.53 5.71
3.48* 3.90 3.64 3.44 3.35 3.37 3.48
3.48* 3.40 3.15 2.95 2.87 2.89 3.00
1.87 1.83 1.79 1.72
1.63 1.59 1.54 1.48
Metric 3
A (m)
A (m)
B (m)
5.02 5.73 6.17 6.38 6.41 6.26 5.90 5.28 4.27
5 4 3 2 1 0(GROUND) -1 -2 -3
: Rating Over Front : Rating Over Side or 360 degree
5.56 4.96 4.67 4.61 4.65 4.81
4
5
Unit: 1,000 kg MAX. REACH
6
A (m)
2.93* 2.66 2.52 2.48 2.51 2.59
2.52 2.25 2.12 2.09 2.11 2.18
1.58* 1.77 1.65 1.56 1.52 1.53 1.58
1.58* 1.54 1.43 1.34 1.30 1.31 1.36
1.24 1.27 1.24 1.19 1.13 1.08 1.05 1.06
1. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
2. *RATED LOADS ARE BASED ON HYDRAULIC CAPACIT Y.
2. *RATED LOADS ARE BASED ON HYDRAULIC CAPACIT Y.
3. RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC CAPACIT Y OR 75% OF TIPPING CAPACIT Y.
3. RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC CAPACIT Y OR 75% OF TIPPING CAPACIT Y.
1.09 1.11 1.09 1.04 0.98 0.93 0.91 0.92
0.85 0.83 0.81 0.78
0.74 0.72 0.70 0.67
1.23 0.94 0.80 0.73 0.70 0.73 0.80 0.98 1.43
1.08 0.82 0.69 0.63 0.61 0.62 0.69 0.84 1.23
5.02 5.73 6.17 6.38 6.41 6.26 5.90 5.28 4.27
: Rating Over Front : Rating Over Side or 360 degree
BRO-DX60R-DX80R-TD
Kn-2M-1210-20997_28-F
For more information visit www.doosanequipment.com
Doosan Infracore
Doosan® is a registered trademark of Doosan Infracore Co., Ltd. in the United States.
© 2010 Doosan Infracore Construction Equipment America. All rights reserved.
