Transcript
Making a Call: Analog Ports (Single Line Telephones) o
Outgoing Call (CO Line) Dial CO Line code (other codes may be applicable). Listen for CO Line dial tone; then dial the telephone number.
Intercom Call (to another extension)
qpq–qty
Listen for dial tone and dial the extension number.
{FLASH} + w
Call Brokering (handling two calls)
While connected on a call press {FLASH} (hook-switch flash). Dial CO Line code, wait for dial tone, and then dial second number. To switch back to the first call, press {FLASH} then dial w. To disconnect the current call, press {FLASH} then dial q.
uo
Account Code Dial uo + valid account code, wait for dial tone.
p
Call Operator/Attendant Dial p.
{FLASH} + e
Conference (3 party max.) While on a call - press {FLASH} (hook-switch flash). Make a second call. Press {FLASH} (hook-switch flash), then dial e.
Conference, Meet Me (4 party max.)
eop – eou
Operation – Transfer a caller to a Meet Me Conference While connected to another extension or CO Line, momentarily press the hook-switch (or press the FLASH button). Wait for dial tone, then dial the Meet Me Conference (390-397). Hang up to complete the transfer. Operation – Join a Meet Me Conference Dial the Meet Me Conference destination to join (390-397).
Last Number Redial Dial #i.
Paging
#i
rpp, rpq – rpi, uuu
Dial the Page access code (rpp – rpi, uuu).
P7291 AEUG 03/01-1
DX-80 Analog Port Codes and Operation
Speed Dial
Extension rup–rio, System tpp–yoo
Setup Dial #q, rup–rio (speed # bin), input telephone #. Press FLASH (hook-switch flash). Operation – Use Dial the Speed Dial bin (rup–rio, tpp–yoo).
Setup: Analog Ports #ow
Alarm - Extension
Operation – Activate Dial #ow, hhmm (24hr format), then q for once, w for repeated daily. Operation – Cancel Dial #*ow.
#w
Call Forward - Extension Operation – Activate
Call Forward may be invoked for several operation modes. Each mode may also be invoked: q=CO calls only, w=CO and Intercom calls, e=Intercom calls only. Immediate Forward: dial #ww, (ext #), q /w/e option. Busy Forward: dial #w q, (ext #), q /w/e option. 1 2 No Answer Forward: dial #wr, (ext #), q /w/e option, t , t . 1 2 1 (t + t are time settings. t is - time the first call to your extension 2 following inactivity at your extension will ring before forwarding. t is the time all calls after the first to your extension will ring before forwarding.) Follow Me Forward: dial #we, (your ext #), q /w/e option, your extension password. (Calls to your extension will ring at this ext.) Follow To Forward: Dial #wt, (ext #), q /w/e option. Operation – Cancel Forward Cancel Immediate Forward: dial #*ww. Cancel Busy Forward: dial #*wq. Cancel No Answer Forward: dial #*wr. Cancel Follow Me Forward: dial #*we. Cancel Follow To Forward: dial #*wt.
Do Not Disturb
#r
Dial #r. Repeat to clear. P7291 AEUG 03/01-1
DX-80 Analog Port Codes and Operation
#ou
Extension Password
Dial #ou, password (pppp set at factory), then input new password.
#o*
Hotline
Operation – Setup Dial #o*, ext # or speed bin #, 0–9 (0–9 seconds delay). Whenever the telephone is taken off-hook, this destination is called. Operation – Cancel Dial #*o*.
#ou
Phone Lock/Unlock
Dial #ou, extension password, then # for lock or * unlock.
#yo
Reset DND and Call Forward Dial #yo. DND and Call Forward modes are cancelled.
In Progress Features: Analog Ports #
Call Back - CO Line/Extension
When you try to access an outside line or extension and get a busy tone, dial #.
#ue
Call Park Answer Dial #ue + extension number where call is parked.
Call Pick Up
y, *, rrp–rru
Extension (Direct) Call Pickup: Dial ringing extension number, y. Group Call Pickup: Dial *. Or… Dial the group number of the ringing extension (rrp ~rru).
Camp On – Extension When you call a busy extension, dial r and wait for them to answer.
r
#e
Flash – CO Line While connected to a CO Line, momentarily press the hook switch (FLASH) then dial #e. P7291 AEUG 03/01-1
DX-80 Analog Port Codes and Operation
*
Forced Intercom Tone Ring
When you call an extension that is in Voice Announce mode and wish to tone ring that extension, dial *.
Hold
{FLASH}
Place a call on hold: While on a call, press {FLASH} (hook-switch flash). Hang up. The line is placed on System (Common) hold. Retrieve a call on hold: Press {FLASH} (hook-switch flash).
i
Intrusion - Extension/CO Line When you dial an extension that is busy, dial i.
#to, #
Meet Me Page
While a page is currently in progress, dial # or #to.
#oy
Messaging – Call Me
Set: When you have called an extension and wish to leave a message, press #oy. Cancel: Dial #*oy,then the ext # where your message was previously left.
Monitor - Extension/CO Line {Privacy Alert!}
i
When you dial an extension that is busy, dial q. (Reference applicable laws when using this feature.)
p
OHVA – Extension When you call a busy extension, dial p and talk over their speaker.
Pulse to DTMF Conversion
*
After a Dial Pulse (rotary) call is made on a CO line, press *. Any digits dialed following the * will be sent in DTMF (Tone) mode.
Tone Ring - Forced
*
When a digital speakerphone in Voice Announce mode is called, you can change the alert to tone by pressing *.
P7291 AEUG 03/01-1
DX-80 Analog Port Codes and Operation
Transfer While connected on a call (CO Line or intercom extension), press {FLASH} (hook switch flash). Listen for dial tone, then dial the destination where this call is to be transferred (extension, UCD Group, Virtual Number, etc.) Wait for the caller to answer - to screen the transfer. Hang up to complete the transfer.
P7291 AEUG 03/01-1
DX-80 Analog Port Codes and Operation
