Transcript
DXWPC15 SERIES
catalog number: notes:
architectural, Full cutoFF Wall Pack the DXWPC15 series is an architectural, full cutoff wallpack that is ideal for parking areas, entrances, walkways, underpasses, loading docks, and recreation areas.
fixture type:
Detailed Specifications CONSTRUCTION The DXWPC15 Induction Series features a durable, die-cast aluminum back housing with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The DXWPC15 features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp are protected by an impactresistant, tempered glass lens.
project:
laMPS & BallaStS High Pressure Sodium: B17 type lamps from 35 to 150 watts, utilizing a medium base, glazed porcelain socket pulse rated for 4kV with either a r-NPF or hX-hPF type ballast rated for a minimum operating temperature of -30oc (-22oF) and 120Vac, Double-tap (120/277Vac), Multitap (120/208/240/277Vac) or 480Vac input. Metal halide: BD17 type lamps from 70 to 100 watts, utilizing a medium base, glazed porcelain socket pulse rated for 4kV with an hX-hPF ballast rated for a minimum operating temperature of -30oc (-22oF) and Multi-tap (120/208/240/277Vac) or 480Vac input. Pulse Start Metal Halide: BD17 type lamps from 150 watts, utilizing a medium base, glazed porcelain socket pulse rated for 4kV with a cWa ballast rated for a minimum operating temperature of -30o c (-22oF) and Multi-tap (120/208/240/277Vac) or 480Vac input. Compact Fluorescent: 4-pin triple tube lamps from 26 to 84 watts, utilizing a GX24-q3 base with an electronic programmed start ballast rated for a minimum operating temperature of -20oc (-4of) and 120/277Vac input. Induction: The DXWPC15 utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minumum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). The DXWPC15 is available with (1) 40W round induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000k color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISo and also meet the Electromagnetic Compatibility (EMC) standard.
9”
INSTALLATIoN The DXWPC15 Series is ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Can be wired to a 4’’ junction box, or surface mounted using 1/2’’ NPS conduit entry points.
14”
9.5”
TL110 approx. Weight: 12 lbs.
WARRANTY Any housing component that fails due to manufacturer’s defect is guaranteed for two years from time of shipment. Induction lamps and ballasts are not manufactured by Trace-lite and will be warrantied by the manufacturer for a period of five years. Tracelite will act as the agent for these suppliers and assist in any way possible. Warranty does not apply to damages caused by improper installation, abuse, fire or acts of God.
Accessories (order seperately)
Ordering Information Model
Lamp (Type-Watts)
Volts
Options
Model
DXWPC15
Metal Halide MH-50 MH-70 MH-100
120 = 120V DT = 120/277V MT = 120/208/240/277V 480 = 480V
SZXXX = Single Line Side fuse (Specify 120 or 277V) EM = Emergency Ballast 2B = Two ac Ballasts for (2) Lamp fixtures USA = Meets Buy america requirements
PC1 = 120V photocontrol
Pulse Start Metal Halide PSMH-150 Induction IND-40
PC2 = 208-277V photocontrol WG110 = Wire Guard PG110 = Polycarbonate Guard FC110 = Full Cutoff Shield RL110 = Replacement Lens
Compact Fluorescent CF-26 CF-32 CF-42 CF-26x2 CF-32x2 CF-42x2 High Pressure Sodium HPS-35 HPS-50 HPS-70 HPS-100 HPS-150 Ordering Example: DXWPC15-MH-70-DT
DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com
