Transcript
Dynajet ® 350 th Professional cold and hot-water high-pressure cleaners
MM 3474/08 GB
www.dynajet-online.com
Professional cold and hot-water high-pressure cleaners
www.dynajet-online.com
Professional cold and hot-water high-pressure cleaners
Dynajet ® 350 th The small power station for all applications
Technical data
Type Max. operating pressure
Max. flow rate
Dynajet ® 350 sh
hot and cold water, mobile
hot and cold water, stationary
350 bar (5,075 PSI)
350 bar (5,075 PSI)
7-16 l/ min (1.85-4.23 USgal/ min)
7-16 l/ min (1.85-4.23 USgal/ min)
Pump
triplex plunger pump with ceramic-coated plungers
Engine (water-cooled)
Kubota 3-cylinder diesel engine (13 kW)
Speed of engine/ pump
max. 3,000/ 1,090 rpm
max. 3,000/ 1,090 rpm
Pump motor
via V-belts
via V-belts
Fuel consumption ø
The picture shows the built-in module for the Dynajet ® 350 sh
Dynajet ® 350 th
3.9 l/ h (1.03 USgal/ h) (at 100 % operative)
Heating power of oil burner
max. 1 x 115 kW
max. 1 x 115 kW
Consumption of oil burner
7 l/ h (at 60 % operative)
7 l/ h (at 60 % operative)
Water-tank capacity
300 l (79.36 USgal)
300 l (79.36 USgal)
Volume of fuel tank
70 l (18.52 USgal)
70 l (18.52 USgal)
Chassis
single axis trailer with brake
-
Weight (without water)
760 kg
680 kg
L x W x H (open)
248 x 172 x 172 cm
183 x 122 x 195 cm
L x W x H (closed)
248 x 172 x 172 cm
152 x 122 x 146 cm
Part no.
111 480.010
111 480.030
The picture shows the Dynajet ® 350 th
Independent hot-water high-pressure cleaners for flexible use at any location.
The flexible single-axis trailer. Easy to manoeuvre, light-weight, compact, powerful and well thought out down to the finest detail. Ideal for cleaning professionals, renovators and all users who require the highest performance through a combination of water pressure, water quantity and optimum water temperature. These professional devices are all operated by powerful diesel engines.
Due its water tank and solid hose drum, the Dynajet ® 350 th is ready for
immediate use, no start up time.
Infinitely variable wear-resistant pressure adjustment cleaning performance
to be perfectly adapted to the object.
Built-in module for the Dynajet ® 350 sh
Operating-hours meter, hand-throttle control, lifting eye, 12 V energy supply socket in the control cabinet, 50 m high-pressure hose (NW 8), and 25 m supply hose mounted on a hose drum, 300 litre water tank with gauge and monitoring system, hot-water system, safety valve, pressure regulation valve, operating manual
Accessory sets
Dynajet ® 350 th automatic hose pressure drop down-system
for safe and convenient operation Part no. 111 480.040 Additional water supply inlet to the water tank filled from the drawbar side
Part no. 424 107
Height-adjustable towing gear
Special versions
Standard scope of supply
Special equipment
identical to Dynajet ® 350 th, but with installation frame incl. forklift slots instead of chassis for internal transport or for installation in a transporter or trailer, common exhaust manifold and with one plastic hood on the engine side Part no. 111 480.030
for truck/ tractor unit incl. coupling Part no. 423 862
(as an upgrade for sh-types) Part no. 410 703
Dynajet ® 300 th
Scope of supply: High-pressure cleaning gun with spray wand (total length approximately 800 mm), nozzle carrier and 15° flat-jet nozzle, storage box
Identical equipment to the Dynajet ® 350 th, but with approx. 300 bar (4,350 PSI) working pressure and a delivery rate of approx. 19 l/ min (5,03 USgal/ min) Part no. 111 480.050
Rotating nozzle system
350 th 350 sh
Special paintwork on the hood (RAL colours, not metallic paint) 12 V working light, complete with 2 m spiral cable and magnetic foot
Part no. 437 116
Connection hose
ater/ sand-blasting system W WSS 500 – Spray wand – Hose connections – Spray head incl. nozzle – Suction hose with pipe
Part no. 426 499 Additional support for fitting on the side Part no. 418 376
for high-pressure hoses with straight threaded couplings onto a drum, length 0.5 m, connections 3⁄8” BSP 90/ M22 x 1.5 IT Part no. 430 243
2
Part no. 459 340 459 340
1 set of spark arrestors for engine + burner
All sets are supplied as single parts including sealing paste (heat-resistant). Further accessories and protective clothing can be found from page 44 onwards. MM 3474/08 GB
– Spray wand – Hose connections – Rotating nozzle
ater/ sand-blasting system W WSS 1000 – Spray wand – Hose connections – Spray head incl. nozzle set – Suction hose with pipe
Additional plastic hood, in grey tone RAL 7038
3
350 th 350 sh
350 th 350 sh
Part no. 459 347 459 347
Part no. 459 346 459 346
MM 3474/08 GB
www.dynajet-online.com
Professional high-pressure cleaners
Hot water trailers up to 800 bar (11,600 PSI)... Minimises the set-up time,
due to the water tank and built-in hose drum it is immediately ready for use and easy to operate
Infinitely variable, wear-
Available in the Dynajet ®
350 bar (5,075 PSI), 500 bar (7,250 PSI) and 800 bar (11,600 PSI) types
resistant pressure adjust- ment for optimum adaptati- on of the cleaning power to the object
www.dynajet-online.com
Professional high-pressure cleaners
... a family of powerful units for all situations
n Independent hot-water high-
pressure cleaners for flexible use at any location
An overview of our hot-water trailers Two separate hoods offering ideal access for the operator and for servicing
Shock-resistant plastic hoods reduces the weight corrosion free
Central lifting eye for easy transport site and for unloading
Separate engine, pump and burner area for operator safety, easy access for servicing
Hand throttle adjustment* for making infinitely variable adjustments to the diesel engine speed and high-pressure pump
Optimised engine cooling extends engine life time
Industrial shock absorbers and hinges for robust, long-life hood technology Supply hose on drum so that the water supply runs immediately – reduces set-up time
Central control cabinet simple control system, incl. 12 V socket for energy supply
Stainless-steel water filter extends the operating life of the high-pressure pump, can be washed out
Single-axle chassis for easy manoeuvrability
High-pressure hose on a drum no set-up and assembly time required; ideal space-saving storage, large operating range*
Sturdy frame concept tested on a truck test track
Water tank level switch protects the high-pressure pump against running dry
Easy frost protection system no additional units required, Dynajet ® 800 th with automatic anti-freeze function
Targa concept offering ideal supply-air and exhaust-gas routing, reduces the noise level
Integrated hot water burner for extra cleaning performance, parallel connection burner makes sure that pressure loss is kept to a minimum
Large integrated water tank for settling water and as a water store for independent operation, 1,000 litres in the Dynajet ® 500 th and 800 th types
Anti vibration pads for dampening engine and pump vibrations
Protection frame for pedestrians and to protect the machine
Large diesel tank for extended working times on site
Frames are dip-coated for long-lasting corrosion protection
You can find technical data for our hot-water trailers on page 34 to 37.
(*) available in the Dynajet ® 350 th and 500 th types MM 3474/08 GB
4
5
MM 3474/08 GB
www.dynajet-online.com
Nozzles - a general overview
www.dynajet-online.com
Dynajet ® accessories DN: Diameter (mm) PN: Max. operating pressure (bar)
IT: Internal thread ET: External thread
Technical information on threaded unions/ connections
Pressure 350 bar (5,075 PSI) 500 bar (7,250 PSI) 800-1,200 bar (11,600-17,400 PSI) 1,600-2,800 bar (23,200-40,600 PSI)
Thread M22 x 1.5 M22 x 1.5 (from middle of '08 = M24 x 1.5) M24 x 1.5 DKO 9 ⁄16” -18 UNF-LH
Shape D – flat-jet nozzle
Seal O-ring/ support ring O-ring/ support ring Cone seal O-ring Metallic sealing via cone
30°
Plug-in nozzle version, for use up to max. 1,600 bar (23,200 PSI), available as 15° or 30° jet angle, high surface power with hard jet pressure, held in the nozzle carrier via union nut, seal via sealing ring (Part no. 484 295) and support ring (Part no. 489 307)
15°
An overview of Dynajet ® nozzle shapes and types 30°
15°
Shape E – nozzle insert for small dimensions 40°
Shape A – round-jet nozzle
15°
30°
30°
15°
15°
With 1⁄4” NPT outside thread (cone-shaped thread), for use up to max. 500 bar (7,250 PSI), extremely hard spot jet for removal on small surfaces, can be screwed into any nozzle carrier, sealed with sealing paste or teflon tape
Small sapphire round-jet nozzle with outside thread and quadruple edge (5 mm), for use up to max. 1,000 bar (14,500 PSI), extremely small dimensions, long operating life thanks to the use of sapphire, used in the WSS 1000 water-sandblasting system, seal via sealing glue
40° 60°
15°
40° 60°
40°
15° 30°
15°
15° Shape B – flat-jet nozzle
60°
Shape F – turbo-type rotating nozzle
With 1⁄4” NPT outside thread, for use up to max. 500 bar (7,250 PSI), available in various jet angles 5°, 25° or 40°, for quick surface removal, to be screwed directly into any nozzle carrier, identical sealing procedure as with shape A (sealing paste or teflon tape)
60°
40°
15°
Universal multi-purpose jet nozzles for use up to max. 2,000 bar (29,000 PSI), combines the advantages of a large surface power and an extremely hard water jet, for maximum cleaning performance with very high surface power, variation in design depending on the pressure level, speed adjustment also available in types up to 350 bar (5,075 PSI), for adapting cleaning performance to the object in question, nozzle pin and ceramic seat can be replaced as a repair kit, threaded connection 1⁄4” IT up to 500 bar (7,250 PSI) or 9⁄16” - 18 UNF-LH from 800-2,000 bar (11,600-29,000 PSI)
60°
Shape C – round/ spot jet nozzle
Shape G – ultrahigh-pressure round-jet nozzle
30°
Plug-in nozzle version, for use up to max. 1,600 bar (23,200 PSI), extremely hard spot jet for the most difficult deposits, water jet has a very high exit speed, effective energy transformation, held in the nozzle carrier via union nut, seal via sealing ring (Part no. 484 295) and support ring (Part no. 489 307)
15°
30°
15°
Ultrahigh-pressure nozzle for continuous use with carbide inserts, high speed nozzle thanks to extremely high efficiency, for use up to max. 3,000 bar (43,500 PSI), screwed directly into nozzle carrier or rotating nozzle system, only available as a round-jet nozzle, with hexagon socket and M10 outside thread, metallic cone seal
40°
MM 3474/08 GB
6 15°
40°
7
MM 3474/08 GB
www.dynajet-online.com
Accessories up to 350 bar (5,075 PSI)
www.dynajet-online.com
Accessories up to 350 bar (5,075 PSI) DN: Diameter (mm) PN: Max. operating pressure (bar)
DN: Diameter (mm) PN: Max. operating pressure (bar)
IT: Internal thread ET: External thread
High-pressure extension hoses
Connections via quick-release couplings
Length 50 mm, 1⁄4” ET/ 1⁄4” ET Length 350 mm, 1⁄4” ET/ 1⁄4” ET Length 800 mm, 1⁄4” ET/ 1⁄4” ET
440 607 440 606 440 604 471 538 434 458
Hose connection
As a double nipple for coupling two high-pressure hoses, connections 2x M22 x 1.5 ET
Part no. 427 518
Use directly on the gun connection between the high-pressure hose and the high-pressure cleaning gun to avoid twists in the hose, connections M22 x 1.5 ET/ M22 x 1.5 IT
Part no. 446 920
Nozzle carrier
Part no. 414 021
For sealing shape A and B nozzles
Part no. 000 306.005
For shape C and D plug-in nozzles, connection 1⁄4” IT, complete with O-ring for connecting directly to the extension spray wand
Part no. 431 516
(Fig.1) sealing ring for shape C and D plug-in nozzle carriers required
Part no. 484 295
(Fig. 2) support ring for shape C and D plug-in nozzles
489 307
For direct connection to the high-pressure cleaning gun – connection M22 x 1.5 ET, length approx. 650 mm, 2 nozzle carriers for shape A or B nozzles, infinite regulation of pressure via handgrip, equipped with 1 low-pressure nozzle 25300 (shape B)
Part no. 427 460
Teflon sealing tape
High-pressure cleaning gun 350
With servo valve for simple and easy operation with minimised hand holding forces, trigger safety catch, completely insulated, ideal for work with hot water, overall length approx. 400 mm Gun up to 150° C Hose connection M22 x 1.5 ET Output M22 x 1.5 IT Repair kit for high-pressure cleaning gun 350 (Part no. 466 255)
Nozzle carrier
Part no. 466 255
Sealing ring and support ring
501 274 1
Handle Side-mounted handgrip for the high-pressure gun 350, no tool required for retrofitting, infinitely adjustable
For shape A and B nozzles, connection 1⁄4” IT directly onto the extension spray wand
Swivel joint
Part no. 427 181 427 179 427 584
Dynajet ® recommendation: for safety reasons, you should always select a spray wand of 350 mm or longer, so that when combined with the high-pressure cleaning gun 350, an overall length of approx. 800 mm is reached
Extension spray wands
Part no.
DN 8, length 10 m, connections 2x M22 x 1.5 IT, 150° C DN 8, length 25 m, connections 2x M22 x 1.5 IT, 150° C DN 8, length 50 m, suitable for hose drum for Dynajet ® 350 th, connections 1x 3/8" IT, 90° bend, 1x M22 x 1.5 IT, 150° C O-ring for quick-release coupling Support ring for quick-release coupling
IT: Internal thread ET: External thread
Part no. 446 916
Hose connection
Between the gun and the extension pipe, connections M22 x 1.5 ET/ 1⁄4” IT, complete with O-ring Spare O-ring
MM 3474/08 GB
8
Part no. 427 197
436 797
2
Double spray wand
Spare parts kit for valve
505 583 9
MM 3474/08 GB
Accessories up to 350 bar (5,075 PSI)
DN: Diameter (mm) PN: Max. operating pressure (bar)
www.dynajet-online.com
DN: Diameter (mm) PN: Max. operating pressure (bar)
IT: Internal thread ET: External thread
High-pressure jet nozzles
For adapting the jet strength for sensitive or changing surfaces Description 015 0035 005
Shape A A A
Part no. 427 333 414 019 427 136
Flat-jet nozzles (shape B)
Machine type 280 me + 350 th 350 me + 350 mg + 350 md
Machine type 15° jet angle (standard) 150 me me 280 + 350 th 350 me + 350 mg + 350 md
Description
Shape
Part no.
1515 15034 1505
B B B
425 853 414 016 427 144
2515
B
414 017
25° jet angle 150 me 40° jet angle 150 me me 280 + 350 th 350 me + 350 mg + 350 md
4015 40034 4005
B B B
427 137 427 138 427 141
Round-jet nozzle, plug-in type (shape C) Machine type 280 me + 350 th 350 me + 350 mg + 350 md
Description 1.1 1.3
Shape C C
Part no. 438 670 438 673
Description
Shape
Part no.
1.3 1.6
D D
498 402 436 922
Shape F F
Part no. 414 025 427 589
Repair kits
Type of nozzle for nozzle 414 024 for nozzle 414 023 for nozzle 427 498
Description 150 035 050
Part no. 414 028 414 027 427 499
With adjustable speed: for nozzle 414 025 for nozzle 427 589
035 050
414 029 431 485
Poly nozzle Multi-jet nozzle, ideal for removing chewing gum, for use up to max. 90 °C, connection 1⁄4” IT, housing made out of brass with integrated metal filter Machine type for 280 me + 350 th for 350 me + 350 mg + 350 md
Description 035 050
Part no. 461 181 461 182
Flat-jet nozzle, plug-in type (shape D) Machine type 15° jet angle 280 me + 350 th 350 me + 350 mg + 350 md
Dynajet ® water-sand-blasting accessories
30° jet angle 280 me + 350 th 350 me + 350 mg + 350 md
Description 035 050
For shape F rotating nozzles – consisting of replacement nozzles and ceramic seat, specially designed for the high water temperatures with Dynajet ® machines
IT: Internal thread ET: External thread
Rotating nozzle with manual speed adjustment
Round-jet nozzles (shape A) Machine type 150 me 280 me + 350 th 350 me + 350 mg + 350 md
Accessories up to 350 bar (5,075 PSI)
www.dynajet-online.com
1.3 1.6
D D
447 887 438 679
Sand- or abrasive-blasting head with borcarbide focus nozzle, connection 1⁄4” IT, Side-mounted sand supply, connection for shape B nozzles, 15° jet angle nozzles (shape B) not included in scope of supply
Rotating nozzles Special types with heat-resistant ceramic for rotor and seat, complete impact protection made of plastic, for use up to 150 °C, connection 1⁄4” IT Machine type 150 me me 280 + 350 th 350 me + 350 mg + 350 md
MM 3474/08 GB
Description 150 035 050
10
Shape F F F
WSS 500 water-sand-blasting system
Spare borcarbide focus nozzle
Part no. 414 024 414 023 427 498
Part no. 418 177
430 185
High-pressure nozzles for WSS 500 sand-blasting head Machine type for 150 me for 280 me + 350 th for 350 me + 350 mg + 350 md
Description 1515 15034 1505 11
Shape B B B
Part no. 425 853 414 016 427 144
MM 3474/08 GB
www.dynajet-online.com
Accessories up to 350 bar (5,075 PSI)
DN: Diameter (mm) PN: Max. operating pressure (bar)
www.dynajet-online.com
DN: Diameter (mm) PN: Max. operating pressure (bar)
IT: Internal thread ET: External thread
Abrasive suction hose for WSS 500 With steel spiral inlay, length approximately 12 m
2x clamps for suction hose required (1x on the spray head WSS 500 and 1x on the suction pipe)
Part no. 435 112
The abrasive quanity is infinitely adjustable, placed directly in the abrasive material (e.g. in a bucket)
Part no. 435 113
For connecting WSS 1000 to spray wands with 1⁄4” ET, inlet 1⁄4” IT, outlet 9⁄16” – 18 UNF ET
Part no. 448 204
Suction pipe for WSS 1000
Suction pipe for WSS 500 Part no. 414 036
Adapter nipple for WSS 1000
Water-sand-blasting system WSS 1000 Professional abrasive-blasting head for continuous use, ring-shaped arrangement of the high-pressure nozzles, central abrasive supply, borcarbide focus nozzle, connection 9⁄16“ – 18 UNF IT, connection for shape E high-pressure nozzle (3 pieces), shape E nozzle inserts are not included in the scope of supply Spare borcarbide focus nozzle for WSS 1000
For water-sand-blasting system with steel spiral inlay (length approx. 15 m)
001 422.001
The abrasive quantity is infinitely adjustable, placed directly in the abrasive material (e.g. in a bucket)
IT: Internal thread ET: External thread
Abrasive suction hose for WSS 1000
Part no. 414 037
Accessories up to 350 bar (5,075 PSI)
Part no. 435 111
Abrasives
450 815 Dynabits (water-soluble special grit for sensitive surfaces and for polishing stainless-steel surfaces), 25 kg
Part no. 438 929
other abrasives can be supplied on request
Nozzle sets for WSS 1000 water-sand-blasting system
Dynajet ® recommendation: Quartz sand (0.20 - 0.60 mm), Slag (0.20 - 0.80 mm or 0.60 - 1.4 mm)
High-pressure nozzle sets for WSS 1000 sand-blasting head, each set contains 3 nozzles Machine type Set for 280 me + 350 th Set for 350 me + 350 mg + 350 md
Dimensions 0.6 0.7
Shape E E
Part no. 447 560 447 561
Special tools For changing shape E nozzles for the WSS 1000
MM 3474/08 GB
12
Part no. 438 684
13
MM 3474/08 GB
www.dynajet-online.com
Accessories up to 350 bar (5,075 PSI)
DN: Diameter (mm) PN: Max. operating pressure (bar)
www.dynajet-online.com
Accessories up to 350 bar (5,075 PSI)
DN: Diameter (mm) PN: Max. operating pressure (bar)
IT: Internal thread ET: External thread
Dynajet ® surface and floor cleaning accessories
Nozzle selection for DFS 350 Suitable for Dynajet ® DFS 350 floor cleaning system, with optional 15° or 30° jet angle (Caution: two identical nozzles are always required)
Dynajet DFS 350 floor cleaning system ®
Machine type 15° jet angle for 280 me + 350 th for 350 me + 350 mg + 350 md
Ideal for splash-guard-protected removal and cleaning of surfaces, floors, roads, pavements, etc. at 350 bar (5,075 PSI). Fully equipped with high-pressure gun, heat-resistant guide rollers, stainlesssteel housing, splash guard and hose connection M22 x 1.5 ET for max. 120 °C hot water, nozzle rotor suitable for 2 identical high-speed nozzles (shape D).
Description
Shape
Part no.
0.95 1.10
D D
498 406 498 401
0.95 1.10
D D
498 393 498 394
(Fig. 1) sealing ring for shape C and D plug-in nozzles
Part no. 484 295
(Fig. 2) support ring for shape C and D plug-in nozzles
489 307
30° jet angle for 280 me + 350 th for 350 me + 350 mg + 350 md
Nozzles, sealing rings and support rings are not included in the scope of supply. Stainless-steel type, permanently rust-resistant 4 steerable wheels, for high versatility Splash guard to reduce environmental pollution Complete with high-pressure pistol handle in Dynajet ® quality Hot-water high-pressure hose Hot-water version for 120 °C, suitable for all Dynajet ® machines Large heat and oil-resistant wheels, super smooth running, no jamming Folding handle for easy transportation and space-saving storage Welded stainless-steel nozzle rotor Nozzle carrier for use 2x high-performance nozzles (shape D) Use of nozzles with extremely high efficiency for achieving the very highest
IT: Internal thread ET: External thread
Sealing ring and support ring
1
2
water jet speed and removal performance
Dynajet ® DWS 350 wall cleaning system Ideal for hand-guided operation and for cleaning off walls, ceilings and small surfaces, high removal performance when a constant distance is maintained between the nozzle and the object
Technical data
DFS 350
Max. pressure
350 bar (5,075 PSI)
Max. quantity
50 l/ min (13.23 USgal/ min)
Max. temperature
120 °C
Diameter
520 mm
Connection
M22 x 1.5
Wheels
60 mm
Nozzle equipment
2x shape D
Housing Part no.
single-walled 494 302
MM 3474/08 GB
14
DWS 350/ 3 D (diameter 300 mm, double-walled) Spare high pressure swivel Spare spray gun handle
Part no. 443 314 443 633 444 084
Nozzle selection for DWS 350 Suitable for Dynajet ® DWS 350 wall cleaning system, with 15° jet angle (must be provided with two identical nozzles)
Spare high pressure swivel Part no.
Fully equipped with pistol handle, hose connection M22 x 1.5 ET, stainless-steel splash guard with brush and side-mounted handgrip, double-walled with vacuum option via 2" connection, nozzle rotor with connection for 2 identical nozzles (shape A or B), nozzle not included in scope of supply
501 578
Machine type for 280 me + 350 th for 350 me + 350 mg + 350 md
Description 1502 15028 15
Shape B B
Part no. 414 018 427 823
MM 3474/08 GB
www.dynajet-online.com
Accessories up to 350 bar (5,075 PSI)
DN: Diameter (mm) PN: Max. operating pressure (bar)
www.dynajet-online.com
DN: Diameter (mm) PN: Max. operating pressure (bar)
IT: Internal thread ET: External thread
Dynajet ® roof cleaning accessories
Accessories up to 350 bar (5,075 PSI)
IT: Internal thread ET: External thread
Dynajet ® pipe and heat exchanger cleaning
Dynajet ® DRS-W roof cleaning system
Suitable for wave-profile roofs, connection M22 x 1.5 ET, 400 mm diameter
F 500 foot valve
Part no. 426 846
Fully fitted with brush, pressure gauge, 2⁄2-way manual ball valve for high pressure on/ off, adjustable distance between wheels, with nozzle rotor for 2 identical nozzles (shape D).
User-friendly tool for switching the high pressure on/ off during pipe cleaning (this leaves both hands free for operation), stainless-steel cover, inlet M22 x 1.5 ET, outlet M22 x 1.5 IT, max. 60 l/ min
Part no. 503 865
For connecting the foot valve with pipe cleaning hose, connection M22 x 1.5 ET/ 1⁄4“ IT
Part no. 427 197
Nozzles, sealing rings and support rings are not included in the scope of supply
Dynajet ® DRS roof cleaning system Ideally suited to cleaning concrete or tiled roof tiles, connection M22 x 1.5 ET, 500 mm diameter
Part no. 443 677
Fully fitted with brush, pressure gauge, 2⁄2 -way manual ball valve for high pressure on/ off, height and distance between wheels can be adjusted to the profile distance, with nozzle rotor for 2 identical nozzles (shape D).
Connection nipple
Nozzles, sealing rings and support rings are not included in the scope of supply
Nozzle selection for DRS and DRS-W
Suitable for Dynajet ® types 350 me, 350 mg, 350 md and 350 th for direct connection via the connction nipple on the foot valve Length 15 m, connection 1⁄4“ ET/ 1⁄4” ET, 1⁄4” Length 25 m, connection 1⁄4“ ET/ 1⁄4” ET, 1⁄4” Length 50 m, connection 1⁄4“ ET/ 1⁄4” ET, 1⁄4”
Suitable for Dynajet DRS-W and DRS roof cleaning system with optional 15° or 30° jet angle (Caution: two identical nozzles are always required) ®
Machine type 15° jet angle for 280 me + 350 th for 350 me + 350 mg + 350 md
Description
Shape
Part no.
0.95 1.1
D D
498 406 498 401
0.95 1.1
D D
498 393 498 394
30° jet angle for 280 me + 350 th for 350 me + 350 mg + 350 md
Sealing ring and support ring
1
MM 3474/08 GB
(Fig. 1) sealing ring for shape C and D plug-in nozzles
Part no. 484 295
(Fig. 2) support ring for shape C and D plug-in nozzles
489 307
2
16
Pipe cleaning hoses (350 bar/ 5,075 PSI)
Part no. 414 040 414 041 414 042
Pipe cleaning hoses (max. 150 bar/ 2,175 PSI) Suitable for Dynajet ® typ 150 me Hose 1⁄2” ø, connections 3⁄8“ BSP for hose drum on the trailer, length 60 m, outlet 1⁄2” ET, for directly connecting the nozzle or extension hose As an extension hose for direct extension, connections 1⁄2“ IT – 1⁄2“ ET, length 30 m
17
Part no. 414 043
414 044
MM 3474/08 GB
www.dynajet-online.com
Accessories up to 350 bar (5,075 PSI)
DN: Diameter (mm) PN: Max. operating pressure (bar)
www.dynajet-online.com
DN: Diameter (mm) PN: Max. operating pressure (bar)
IT: Internal thread ET: External thread
Pipe-cleaning nozzles
Machine type for 150 me for 150 me for 280 me + 350 th for 350 me + 350 mg + 350 md 2
2.1
2.2
> 60 mm diameter, 1⁄2“ IT > 30 mm diameter, 1⁄4“ IT > 30 mm diameter, 1⁄4“ IT > 30 mm diameter, 1⁄4“ IT
Rotating nozzle (Fig. 2) for complete all-round surface cleaning, some designed as pulling nozzle Machine type 70-150 mm diameter, 1⁄2“ IT (pulling nozzle, fig. 2.1) for 150 me 30-100 mm diameter, 1⁄2“ IT (pulling nozzle, fig. 2.1) for 150 me me th 30-100 mm diameter, 1⁄4“ IT (no pulling nozzle, fig. 2.2) for 280 + 350 me mg md 30-100 mm diameter, 1⁄4“ IT (no pulling nozzle, fig. 2.2) for 350 + 350 + 350 me mg md 30-100 mm diameter, 1⁄4“ IT (no pulling nozzle, fig. 2.2) for 2 x 350 + 2 x 350 + 2 x 350 Pocking nozzle (Fig. 3) for cleaning completely blocked pipes, drilled as a pulling nozzle Machine type > 60 mm diameter, 1⁄2“ IT for 150 me me me > 40 mm diameter, 1⁄4“ IT for 150 + 150 me th > 40 mm diameter, 1⁄4“ IT for 280 + 350 me mg md > 40 mm diameter, 1⁄4“ IT for 350 + 350 + 350
3
IT: Internal thread ET: External thread
Special accessories For direct connection to pipe cleaning hoses, standard nozzle (Fig. 1) for all fields of application, drilled as a pulling nozzle
1
Accessories up to 350 bar (5,075 PSI)
Mud suction unit + chemical injector (Fig. 1) mud suction unit for sucking up water, sludge, etc. using underpressure, directly connected to a high-pressure hose or cleaning gun, inlet M22 x 1.5 ET, max. 200 bar (2.900 PSI), connection for 1x nozzle (shape B). Nozzle not included in scope of supply! For Dynajet ® 150 me
Part no. 414 051 414 046 434 659 414 045
Part no. 414 054 414 050 434 660 414 049 459 816
Part no. 414 063
1
Suitable flat-jet nozzle 1515 B (for Dynajet ® 150 me)
425 853
2
(Fig. 2) chemical injector for sucking up cleaning agents using underpressure (only in combination with double-spray wand (Part no. 427 460)) direct connection to unloader valve (only suitable for the Dynajet ® trolly types) inlet M22 x 1.5 IT/ outlet M22 x 1.5 ET, adjustable dosing quantity, complete with suction hose, max. 350 bar (5,075 PsI)
445 582
Hose connections, quick-release couplings and nipples 1 2
Part no. 414 053 414 048 434 661 414 047
3 4
6
5
7
8
M22 x 1.5 ET, 1⁄4” IT M22 x 1.5 IT, 1⁄4” IT M22 x 1.5 IT, 1⁄4” ET M22 x 1.5 IT, 3⁄8” ET M22 x 1.5 IT, 3⁄8” IT M22 x 1.5 ET, 3⁄8” IT M22 x 1.5 ET, 1⁄4” ET M22 x 1.5 ET, 3⁄8” ET
Fig. 1 2 3 4 5 6 7 8
Part no. 427 197 427 587 427 586 427 585 427 534 427 425 428 016 428 017
Accessories for container and tank cleaning
Dynajet ® TWS 200 tank washing system
Hose drum Loose drum for installation on site, incl. hand crank, high-pressure swivel joint, short hose 0.5 m with double nipple, fixing plate, inlet M22 x 1.5 IT, outlet M22 x 1.5 ET, for max. 50 m high-pressure hose DN 10 (extension hose not included in scope of supply)
Rotating high-pressure nozzle head for internal cleaning of containers, vessels, barrels, tanks, etc. with max. 200 bar (2,900 PSI) working pressure, nozzle head driven by motor. Parts in contact with water are made of stainless steel, diameter of head 40 mm, shaft length 700 mm, overall length 1,050 mm, weight approx. 25 kg, inlet M22 x 1.5 ET suitable for high-pressure hose, fully equipped with safety valve on the inlet, with 2 high-pressure nozzles, designed for 200 bar (2,900 PSI) working pressure at 21 l/ min (5.56 USgal/ min), various drive motors can be selected for the nozzle head
220 V drive Pneumatic motor drive Water motor drive, no external energy supply required
High-pressure extension hoses
Part no. 446 917 446 918 446 919
For hose drum (Part no. 459 309) or trailer (350 th), DN8, connections 3⁄8“ BSP 90° directly on the drum, M22 x 1.5 IT Length 25 m Length 50 m Length 75 m
TWS 400 tank washing system Self-driven rotating high-pressure nozzle head for internal cleaning of containers, vessels, barrels, tanks, etc. with max. 400 bar (5,800 PSI) working pressure, fully equipped with rotor and 2 nozzles (shape A), standard, designed for 350 bar (5,075 PSI) and 21 l/ min (5.56 USgal/ min), connection for hose M22 x 1.5 ET, driven by nozzle reaction force and not by an external energy supply, speed of rotor rotation can be adjusted via the nozzle position on the rotor Aluminium housing Stainless-steel housing
MM 3474/08 GB
18
Part no. 459 469 495 800
Part no. 459 309
Part no. 440 603 440 604 440 605
Distributing piece For parallel operation of 2 consumers by using 1 pump 1x inlet M22 x 1.5 ET, 2x outlet M22 x 1.5 ET
Part no. 457 606
also to use as collecting piece for 2 pumps to 1 consumer (only possible with Dynajet ® machines that are equipped with unloader valves without automatic hose pressure drop down-system) 19
MM 3474/08 GB
www.dynajet-online.com
Personal safety equipment
www.dynajet-online.com
* The protective clothing is certified in accordance with Regulation 89/ 686/ EEC and BGR 191
Sizing information for ordering protective clothing: Order size S Order size M Order size L Order size XL Order size XXL
(Small) (Medium) (Large) (X-Large) (XX-Large)
Body size 158 – 170 cm Body size 170 – 182 cm Body size 182 – 188 cm Body size 188 – 194 cm Body size 194 – 200 cm
Personal safety equipment
Clothing for protection against ultrahigh-pressure Chest circumference 80 – 92 cm Chest circumference 92 – 104 cm Chest circumference 104 – 116 cm Chest circumference 116 – 124 cm Chest circumference 124 – 132 cm
Overalls* As protection against ultrahigh pressure, 100 % waterproof, different protction rates available up to 500 bar (7,250 PSI) high-pressure cleaning: Medium (size S – M) Large (size L – XL) X-Large (size XXL)
Protective suit Poratex Premium, 100% waterproof, 2-piece (jacket + overalls), without protective function against high pressure Part no. 414 067 414 068 414 069 414 070
Medium Large X-Large XX-Large
460 749 460 750 460 751
up to 1,000 bar (14,500 PSI) high-pressure cleaning: Medium (size S – M) Large (size L – XL) X-Large (size XXL)
460 752 460 753 460 754
up to 2,000 bar (29,000 PSI) high-pressure cleaning: Medium (size S – M) Large (size L – XL) X-Large (size XXL)
460 747 460 300 460 748
High-pressure apron*
Up to 2,000 bar (29,000 PSI), easy to put on and take off, weight 1.7 kg
Part no.
Part no. 476 881
Overalls As protection against dirt, 100% waterproof, with cap and neck ruff, without protective function against high pressure
Large X-Large
Part no. 426 895 426 896
Safety vest* For protection against ultrahigh pressure, 100% waterproof, in different types for different protection-pressure ranges
"Speedy" protective goggles Made from scratch-proof colourless polycarbonate sheet, with length-adjustable wings
MM 3474/08 GB
20
Part no. 414 094
up to 500 bar (7,250 PSI) high-pressure cleaning version A (size M-XXXL) up to 1,000 (14,500 PSI) bar high-pressure cleaning version A (size M-XXXL) up to 2,000 bar (29,000 PSI) high-pressure cleaning version A (size M-XXXL)
21
Part no. 460 755 460 756 460 302
MM 3474/08 GB
www.dynajet-online.com
Personal safety equipment
www.dynajet-online.com
Personal safety equipment
* The protective clothing is certified in accordance with Regulation 89/ 686/ EEC and BGR 191
Safety shoe covers*
With clips for securely fastening them over your regular safety boots, for protection against ultrahigh pressure, very comfortable and light to wear, one size fits all Version designed for 1,000 bar (14,500 PSI) Version designed for 2,000 bar (29,000 PSI)
Hand protection – right hand: Version designed for 500 bar (7,250 PSI) Version designed for 1,000 bar (14,500 PSI) Version designed for 2,000 bar (29,000 PSI)
Gloves
Safety boots 800 for use when working with manually-operated high-pressure cleaners, can resist a pressure of up to 800 bar (11,600 PSI) and a lance recoil of up to 117 N, for a nozzle size of up to 1.0 mm, with up to 75 mm distance between the nozzle and the boots, and a feed rate of up to 0.2 m/ sec and water flow rate of up to 17.7 l/ min (4.68 USgal/ min)
Part no. 460 758 460 759 460 760
Safety boots 1700 for use when working with manually-operated high-pressure cleaners, can resist a pressure of up to 1,700 bar (24,650 PSI) and a lance recoil of up to 250 N, for a nozzle size of up to 1.0 mm, with up to 75 mm distance between the nozzle and the boots, and a feed rate of up to 0.2 m/ sec and water flow rate of up to 25.7 l/ min (6.8 USgal/ min)
460 761 460 762 460 307
Safety boots 3000 for use when working with manually-operated high-pressure cleaners, can resist a pressure of up to 3,000 bar (43,500 PSI), tested for a lance recoil of up to 250 N, for a nozzle size of up to 1.0 mm, with up to 75 mm distance between the nozzle and the boots, and a feed rate of up to 0.2 m/ sec and water flow rate of up to 25.7 l/ min (6.8 USgal/ min)
Part no. 460 310
Part no. 414 076 414 077 414 078 414 079 414 080
Size 42 Size 43 Size 44 Size 45 Size 46
MM 3474/08 GB
22
Part no. 499 649 499 650 499 651 499 652 499 653 499 654 499 655
Size 42 Size 43 Size 44 Size 45 Size 46 Size 47 Size 48
Types conform with CE, S5 EN 345
Part no. 460 742 460 743 460 744 460 745 460 746 492 086
Size 42 Size 43 Size 44 Size 45 Size 46 Size 48
Part no. 414 086 414 087 414 088 414 089
Boots without protection
Part no. 460 736 460 737 460 738 460 739 460 740
Size 42 Size 43 Size 44 Size 45 Size 46
Hose protection* For protection of the hose, diameter of 60 mm, length of approx. 700 mm
Part no. 460 757 460 306
Lined, 100 % waterproof, breathable, heat-resistant, without protection function for high-pressure
Size 8 Size 9 Size 10 Size 11
Certified according to inspection basis EN 345-1 – June 1997, BGR 191, Section 3.1.5.5.3 (trade association regulations and rules for health and safety at work – use of foot and leg protection) by approved and authorised centre no. 0299
Hand protection* For ultrahigh-pressure protection, especially for right or left hand, one size fits all Hand protection – left hand: Version designed for 500 bar (7,250 PSI) Version designed for 1,000 bar (14,500 PSI) Version designed for 2,000 bar (29,000 PSI)
Safety boots 800/ 1700/ 3000
Safety helmet Incl. ear defenders, visor and anti-fog visor (polycarbonate), types conform with CE, EN 397: 1195, EN 352-3 Additional stainless steel visor Replacement polycarbonate visor Spare ear defenders
23
Part no. 427 305
414 091 414 092 414 093
MM 3474/08 GB
www.dynajet-online.com
www.dynajet-online.com
General accessories
General accessories DN: Diameter (mm) PN: Max. operating pressure (bar)
IT: Internal thread ET: External thread
GEKA quick-release couplers for water and air hoses with 3⁄8”– 11⁄4” NW (V)
water pump 3.6 m3/ h with automatic switching 230 V, 0.75 kW, water-protected to IP 65, with check valve in the intake line
Part no. 413 895 002 313.009 018 535.004 002 312,000 001 387.007 001 390.007 041 403.006 014 068.009 001 386.008 062 815.000 062 861.009 062 621.003 002 311.001 001 391.006 062 622.002
Sealing, GEKA plus Sealing S 3⁄8” S 1⁄2” S 3⁄4” S 1” ET 3⁄8” ET 1⁄2” ET 3⁄4” ET 1” ET 11⁄4” IT 1⁄2” IT 3⁄4” IT 1” IT 11⁄4”
Booster pump
Part no. 208 654.009
Additional filter Part no.
Supply hose PN 10 bar, 3⁄4” (DN 19), length of 20 m, 2x GEKA coupling
Storage drum
Suitable for: max. 25 m, DN 8 high-pressure hose max. 25 m, DN 10 high-pressure hose max. 20 m, 3⁄4” (DN 19) supply hose
Part no. 446 914
MM 3474/08 GB
24
Part no. 001 160 004
Filter insert 5”, material: VA, 80 μm
495 841
Highly concentrated liquid softener, protects all water-immersed heating elements against calcification 1 litre 10 litres
For supply side, 0-10 bar, for monitoring the boost pressure, inlet for GEKA coupling, outlet for GEKA coupling
460 418
Aqua Soft liquid softener ASFE 2000
Part no. 446 926
Pressure gauge
Also for supply side GEKA coupling inlet, GEKA coupling outlet, filter insert made of VA stainless steel, size 5”, filter unit 80 μm, loose delivery
Part no. 482 923 497 086
Antiseize lubricant Protects against damage and seizing in the threaded unions of stainless-steel connections Tin 30 g Tin 500 g
25
Part no. 505 919 498 633
MM 3474/08 GB
www.dynajet-online.com
General accessories
DN: Diameter (mm) PN: Max. operating pressure (bar)
www.dynajet-online.com
DN: Diameter (mm) PN: Max. operating pressure (bar)
IT: Internal thread ET: External thread
Mobile Dynajet ® filter station
General accessories
IT: Internal thread ET: External thread
Dynajet ® wet suction
For universal use with all high-pressure cleaning units in the Dynajet ® family Robust aluminium type to minimise weight, corrosion-resistant Large filter surface and universal filter unit that can be adjusted to the
Suitable for Dynajet ® surface cleaning systems, suction performance approx. 3,000 W, two-stage turbine, air output 120 l/ sec. (31.75 USgal/ sec) without suction hose, for connecting to all DFS 2“ systems with suction connection, fully equipped with storage tank and suction pump
Part no. 426 844
For connecting to Dynajet ® wet suction with spiral inlay, length 15 m, temperature-resistant, suitable for all DWS and DFS systems
Part no. 447 558
type of dirt and the machine type ensure the highest flexibility on site Having replacement filters available on-site keeps changing times
to a minimum Using a short hose, the filter unit is directly connected before the supply
line of the high-pressure cleaning tool and protects the machine Increased working times through large filter surfaces in 2x2 parallel
operation with minimised pressure loss at the same time
2x2 filter housing 9 3⁄4” in parallel connection* Robust design with 2 carrying handles 3-leg frames with solid rubber feet for reliable stability Covering plate made of aluminium Storage space for 4 replacement filter inserts Connection 3⁄4” GEKA coupling, outlet 3⁄4” GEKA coupling 2x cover coupling Stainless-steel filter can be washed out
Suction hose
Filter inserts not included in standard scope of supply. *Funct. principle for parallel connection: 80 μm VA
80 μm VA
10 μm/50 μm
Technical data
Filter station
Max. supply pressure
8 bar (116 PSI) at 20 °C
Max. temperature
50 °C at 3 bar (43,5 PSI)
Max. volumetric flow rate
40 l/ min (10.6 USgal/ min)
Weight
approx. 11 kg
Dimensions (L x W x H)
435 x 340 x 404 mm
Part no.
494 706
Hose catcher As safety protection when manually cleaning the interior of pipes and heat exchangers with flexible lances and hoses, fastened universally by using clamps, safety plate, storage compartment for various inserts, suitable for hoses 4/2, 5/2, 6/2
Part no. 505 570
Protects the operator in case of nozzle or hose failure.
10 μm/50 μm
Inserts for filter box Possible filter inserts: Type Depth filter (Fig. 1) Depth filter (Fig. 1) Stainless steel (Fig. 2)
Fineness 10 μm TF 50 μm TF 80 μm VA
Dimensions 9 3⁄4” 9 3⁄4” 9 3⁄4”
Part no. 496 557 494 759 495 982
Fig. Restraining equipment = mounted on a typical heat exchanger
Filter packages Equipment concept for accessory filter packages, consists of: Accessory package 1 with 6x depth filters 10 μm TF, 2x stainless-steel filter 80 μm VA, 2 m supply hose Accessory package 2 with 6x depth filters 50 μm TF, 2x stainless-steel filter 80 μm VA, 2 m supply hose
MM 3474/08 GB
26
Part no. 496 575
496 576
27
MM 3474/08 GB
Putzmeister Mörtelmaschinen GmbH Max-Eyth-Straße 10 · D-72631 Aichtal · Germany P.O. Box 2152 · D-72629 Aichtal · Germany Telefon Telefax
+49 (0) 7127 599-0 +49 (0) 7127 599-743
Internet www.dynajet-online.com eMail
[email protected] MM 3474/08 GB
