Preview only show first 10 pages with watermark. For full document please download

Dynamix Mk2 Specifications Sheet.indd

   EMBED


Share

Transcript

DYNAMIX MK2 SURROUND Hear the crackle of leaves underfoot and the sharpness of the violin as the thriller hits its peak. Be immersed in cinema quality sound at home with the wedge-shaped design of the Dynamix Mk2, with the same 15 degree angled baffle used in Krix’s commercial cinema surround speakers, providing the ultimate sound experience. The bass and mid-range are delivered through a high grade 130mm driver with a doped curvilinear paper cone, oversized voice coil and powerful magnet, while the tweeter is a 26mm ring radiator with extended frequency response. The bass reflex design delivers efficient yet balanced bass uncharacteristic of its size, while the front port eliminates any “boomy” bass, often cause by wall mounting a rear-ported design. Ideal for rear or side surround speakers in your home cinema, the Dynamix Mk2 can be mounted higher up in the room and on the wall, achieving excellent pattern control and audio coverage while also looking great. For the ultimate sound experience at home, play it through Krix. FEATURES • Bring movies to life • 15 degree angled front baffle • Easy wall mounting Dynamix Mk2 Frequency Range 45Hz - 40kHz (in room response) Power Handling 20 – 120 Watts RMS recommended amplifier power Sensitivity 88 dB (2.83V / 1m) Impedance Nominal 6 Ohms (Minimum 3.7 Ohms) Configuration 2-way Low Frequency Driver Cast aluminium basket with a nominal 130mm (5") doped curvilinear paper cone. 25mm (1") voice coil wound on high powered aluminium former, with copper shorting ring. Vented and double magnet shielded High Frequency Driver 26mm (1") dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion Enclosure Type Dual chambers – sealed midrange chamber with bass reflex main chamber. Front vented with internal and external flaring Input Terminals Gold plated binding posts Mounting Key-hole style bracket, located on the rear of the cabinet Dimensions 355mm high x 245mm wide x 200mm deep at the top (110mm deep at the bottom) Net Weight 6kg each krix.com ADELAIDE | 14 Chapman Road, Hackham, SA, 5163, Australia T +61 8 8384 3433 F +61 8 8384 3419 [email protected] Pg. 1 of 2 FINISHES Black Woodgrain Black Ash Atlantic Jarrah Blackwood krix.com ADELAIDE | 14 Chapman Road, Hackham, SA, 5163, Australia Walnut Cola Dynamix MK2 Specifications Sheet-001 T +61 8 8384 3433 F +61 8 8384 3419 [email protected] Pg. 2 of 2