Transcript
E-HDSEM-M Technical Specifications
E-HDSEM-M Technical Specifications Lengths 0.5 to 2.5 meters High Speed HDMI® with Ethernet Cable Assembly Rev. 140121
Liberty’s E-HDSEM-M High Speed HDMI® with Ethernet cable assemblies are designed with consideration to the custom installer. A high quality and heavily shielded digital transport cable design mated with an HDMI approved connector warrants excellent performance. The cable is third party ATC verified to the highest HDMI cable standard, High Speed HDMI® with Ethernet.
Key Features: • • • • •
Smaller low profile molding Smaller OD cable diameter Short lengths ATC verified performance Flexible cable
The primary use of this cable type is connecting HDMI sources to HDMI displays. Typically Flat panel TV connection to digital sources such as Blu-Ray® Players and Set top boxes. These shorter length cables are excellent for HDMI rack patching and connecting sources and displays to extension technology and or digital media distribution equipment. These are passive cables without any embedded equalization and boost technology. They are not directional.
This cable family features smaller profile molding and a reduced cable diameter. The cable is flexible and offers a small footprint. These cables are fully future proof and adequate to support HDMI® 2.0 bit rates of 18 Gbps up to 2 meters.
11675 Ridgeline Dr. Colorado Springs, CO 80921
Key Applications: • • •
Home Theater Flat Panel TV Equipment Rack patching
Toll-Free: 800-530-8998 Fax: 719-260-0075
E-HDSEM-M Technical Specifications
Technical Specifications I/O Connections HDMI
Male HDMI Type A connector
HDMI Supported Video, Audio and Ethernet HDMI Maximum Video Compatibility Video Compliance Embedded Audio Maximum Bandwidth Ethernet
Deep Color 48 Bit at 1080p, 3D, and 4k x 2k HDMI, HDCP, and CEC (Consumer Electronics Control) Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio 10.2 Gbps 100 Mbps
Cable Construction HDMI Connector Material HDMI Connector Dimensions Jacket Material Cable Construction Overall Cable Size Minimum Bend Radius Maximum Tensile Load Available Cable Lengths
Molded PVC 20x10.5x23.6mm (full length to back of cable strain relief is 31.6mm) Flexible PVC Copper, 30 AWG TMDS pairs 5.7 mm 57mm 10Kg 0.5 m (1.64 ft), 1 m (3.28 ft), 1.5 m (4.92 ft), 2.0m (6.56 ft), 2.5m (8.20 ft)
Environmental Requirements Operating Temperature Operating Humidity Storage Temperature Storage Humidity
0° to +60° C (+32° to +140° F) 20% to 85%, Non-condensing -20° to +80° C (-0° to +176° F) 20% to 85%, Non-condensing
Power and Regulatory Regulatory
NEC® CL2, CEC CMG FT4, RoHS
Part Numbers Part Numbers E-HDSEM-M-0.5 E-HDSEM-M-01 E-HDSEM-M-01.5 E-HDSEM-M-02 E-HDSEM-M-02.5
Cable Length 1.64 feet (0.5M) 3.28 feet (1.00m) 4.92 feet (1.50m) 6.56 feet (2.00m) 8.20 feet (2.50m)
Description Molded High Speed HDMI® with Ethernet Cable ½ meter long Molded High Speed HDMI® with Ethernet Cable 1 meter long Molded High Speed HDMI® with Ethernet Cable 1½ meters long Molded High Speed HDMI® with Ethernet Cable 2 meters long Molded High Speed HDMI® with Ethernet Cable 2½ meters long
Liberty Wire & Cable specifications are subject to change without notice. Contact an account representative for current product specifications. Liberty Wire & Cable continuously strives to ensure product specifications are accurate and complete. All physical specifications are nominal.
11675 Ridgeline Dr. Colorado Springs, CO 80921
Toll-Free: 800-530-8998 Fax: 719-260-0075
