Transcript
Code / Ref.Nr.:
530214
Date:
May 2008
Subject:
Easy Fold Modification
WARNING: • • • • • • • •
•
Carry out the handling according to the following manufacturer’s instructions. Always respect warnings from the relevant manuals of the machine. Make sure all electric power or other energy sources are disconnected and closed before any servicing. Always turn of the main switch. Wait 10 minutes after electrical power is disconnected to eliminate power on the inverter terminals. Installation, maintenance and service must be executed by skilled service personnel only or by a service organisation with appropriate authorization from the manufacturer. For service, use only original replacement parts. Re-install all machine parts in the original way. The qualified agency performing this work assumes all responsibility for this kit installation. Other service activities than described below, disable all manufacturers’ responsibility. Make sure children are not around during work in progress.
Primus Belgium Driemasten 126 B-8560 Gullegem Belgium Phone: +32 (0)56 43 52 00 Fax: +32 (0)56 40 34 63 E-mail:
[email protected] Web: www.primuslaundry.com
Primus Central Europe Mistecká 1116 742 58, Příbor Czech Republic Phone:+420 556 768 800 Fax: +420 556 723 383 E-mail:
[email protected] Web: www.primuslaundry.com
Primus France Rue Jacques Monod z.i. Est F-69120 Vaulx-en-Velin France Phone:+33 (0)4 78 79 55 75 Fax: +33 (0)4 72 04 62 72 E-mail:
[email protected] Web: www.primuslaundry.com
Washer
Applicable machine models Dryer
Ironer
PW5
DAM5 / DAMC5
Pony
P6, P7
DA9 / DAM(S)(T)9
I18, 25, 30
C6, 8
T9
I35, 50
RS6, 7, 10
T11, 13, 16
IF50 / IR50
RS13, (16), 18, 22, 27, 35
T1313
IFF
FS6, 7, 10
T24, 35
Crossfolder
FS16, 22
DA11, 13, 15
Stacker
FS33, 40, 55
DA1313
FS120
D25, 35
MB16, 26, 33
D55, 77
MB44, 66 MB90, 140, 180
Washer
Applicable type of spare parts Dryer
Ironer
General
General
General
Chasis
Chasis
Chasis
Shock absorbers
Cabinet
Cabinet
Cabinet
Controler
Controler
Controler
Coin unit
Coin unit
Coin unit
Electric components & sensors
Electric components & sensors
Electric components & sensors
Heating unit
Heating unit
Heating unit
Motor & pulley & belts
Inlet
Inlet
Bearing house & seals
Motor & pulley & chains
Soap hopper
Drum
Bearing house
Motor & pulley & belts
Door
Ironer belts
Bearing house & seals
Air filter
Air filter
Drum
Air fan
Air fan
Door
Exhaust
Exhaust
Drain
Delivery system Folding system
ECN 589, 729, 811 Page 2 of 4
Code / Ref. Nr: 530214
Description: The drive cylinder of the Easy Fold system was modified – see the picture below. You can see 3 executions on the picture – the oldest version 1.2, modified version 1.3, which was described in Technical Bulletin Nr. 9, and finally the new version 1.4. Please find description of the latest version 1.4 in the following paragraphs. The purpose of this modification is to prolong lifetime of the threaded shaft with flange – pos. 2. It is now supported by two rings (3), which assure that the shaft is not laterally loaded any more; the load is only tensile. Replaceability: The new system can be installed in older machines without any problems, it is fully backwards compatible. You can find installation information in service instruction 525205. You can order the following kits for such upgrade: 525206 – Upgrade from version 1.2 to version 1.4 for machines IF50-200 and IFF50-200 525207 – Upgrade from version 1.2 to version 1.4 for machines IF50-250 and IFF50-250 525208 – Upgrade from version 1.2 to version 1.4 for machines IF50-320 and IFF50-320 525209 – Upgrade from version 1.3 to version 1.4 for all machines Implementation: Version 1.4 was implemented in production on ironers starting with the following serial numbers: IF50-200 IF50-250 IF50-320 IFF50-200 IFF50-250 IFF50-320
520IF000221NG 525IF000242NG 532IF000240NE not made yet; the 1st machine will be 520IFF000003xx 525IFF000198NG 532IFF000211NE
Spare parts: You can find part numbers of individual parts directly in the picture below.
Page 3 of 4
Code / Ref. Nr: 530214
In case you have further technical questions, do not hesitate to contact the after sales department of PRIMUS (references at the front page of this document).
Page 4 of 4
Code / Ref. Nr: 530214
