Preview only show first 10 pages with watermark. For full document please download

E16 Facelift | Compact Excavators

   EMBED


Share

Transcript

E16 Facelift | Compact Excavators E16 Facelift | Specifications Weights Operating weight (MARK) Additional weight for cab with heating Additional weight for steel tracks Ground pressure with rubber tracks Working Range 1615 kg 129 kg 53 kg 28.60 kPa B C D A Engine Make / model Fuel Number of cylinders Displacement Maximum net torque at 1400 RPM (SAE J1995) Kubota / D722-E2B-BCZ-5 Diesel 3 0.72 L 42.2 Nm H G I E F Performance Digging force, dipperstick (ISO 6015) Digging force, bucket (ISO 6015) Drawbar pull Travel speed, low range Travel speed, high range J 9560 N 16640 N 20029 N 2.9 km/h 4.8 km/h Hydraulic System Pump type Pump capacity Pump 1 capacity at 2500 RPM Pump 2 and 3 capacity at 2500 RPM Auxiliary flow Auxiliary relief Boom port relief base and rod end Dual piston pump with gear pump 41.30 L/min 11.25 L/min 15.00 L/min 30.00 L/min 231.0 bar 210.0 - 250.0 bar K (A) (B) (C) (C*) (D) (D*) (E) (F) 196° 4146.0 mm 4101.0 mm 4276.0 mm 1576.0 mm 1586.0 mm 308.0 mm 368.0 mm (G) (H) (H*) (I) (I*) (J) (K) (K*) 2564.0 mm 3616.0 mm 3743.0 mm 2529.0 mm 2656.0 mm 2139.0 mm 2422.0 mm 2602.0 mm Dimensions H F Slew System 80° 60° 8.1 RPM K C B I Fluid Capacities Cooling system Engine lubrication plus oil filter Fuel reservoir Hydraulic system L A D J G 5.70 L 3.50 L 23.80 L 21.50 L E P M N Environmental Noise level LpA(EU Directive 2000/14/EC) Noise level LWA(EU Directive 2000/14/EC) 78 dB(A) 92 dB(A) Standard Features Hydraulically retractable undercarriage from 1330 mm to 980 mm 980 mm dozer blade with two 190 mm blade extensions 230 mm rubber track Double acting auxiliary hydraulics with quick couplers Control console locks Horn Hydraulic joystick controls Retractable seat belt Spark arrester muffler TOPS/ROPS* canopy 1 Two-speed travel Work lights Long blade Warranty: 12 months, 2000 hours (whichever occurs first) 1. Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Q R O (A) (B) (C) (D) (E) (F) (G) (H) (H*) (I) 210.0 mm 435.0 mm 1314.0 mm 1114.0 mm 1257.0 mm 2856.0 mm 1472.0 mm 3925.0 mm 3904.0 mm 23.0 mm (J) (K) (L) (M) (N) (O) (P) (Q) (R) 980.0 mm 2171.0 mm 230.0 mm 480.0 mm 605.0 mm 1192.0 mm 1086.0 mm 1873.0 mm 1722.0 mm Options TOPS/ROPS cab with heater Heavy duty radio Auxiliary hydraulic line on arm Long dipperstick Keyless start Suspension seat Four point tie down Blade extension pads Steel tracks Travel motion alarm www.bobcat.eu ©2012 BOBCAT B 4474200-EN (03-12) Specifications and design are subject to change without notice. Pictures of Bobcat products may show other than standard equipment. Boom swing, left Boom swing, right Slew rate