Transcript
Compact Excavators
E26
E26 – Specifications Weights Operating weight with ROPS canopy , rubber tracks, counterweight, 610 mm bucket (SAE J732): Additional weight for cab with heating Additional weight for long dipperstick Ground pressure with rubber tracks Additional weight with counter weight
Working Range 2565 kg
B C D
130 kg 10 kg 25.50 kPa 183 kg
A P H
Engine Make / model Fuel Number of cylinders Displacement Maximum power (TECH) Maximum net torque at 1400 RPM (SAE J1995)
G
Kubota / D1105-E2B-BCZ-2 Diesel 3 1123 cm3 15.5 kW 71.2 Nm
I
E F
J K
Performance 15800 N 13200 N 22200 N 30200 N 2.4 km/h 4.6 km/h
Hydraulic System Pump type Piston pump capacity Auxiliary flow Auxiliary relief
Dual outlet variable displacement piston pump with gear pumps 28.80 L/min 48.00 L/min 180.0 bar
(A) (B) (C) (C*) (D) (D*) (E) (F)
185° 4552.0 mm 4678.0 mm 4850.0 mm 2132.0 mm 2135.0 mm 385.0 mm 315.0 mm
(G) (H) (H*) (I) (I*) (J) (K) (K*)
3246.0 mm 4272.0 mm 4473.0 mm 3057.0 mm 3239.0 mm 1809.0 mm 2582.0 mm 2890.0 mm
Dimensions H F
Slew System Boom swing, left Boom swing, right Slew rate
60° 60° 9.6 RPM
K C B I
Fluid Capacities Cooling system Engine lubrication plus oil filter Fuel reservoir Hydraulic system
L
A
D G
J E
4.60 L 5.10 L 34.60 L 25.00 L
M
P
Q N
Environmental Noise level LpA(EU Directive 2000/14/EC) Noise level LWA(EU Directive 2000/14/EC) Whole body vibration (ISO 2631–1) Hand-arm vibration (ISO 5349–1)
77 dB(A) 93 dB(A) 0.17 ms-2 0.63 ms-2
O
Standard Features 1515 mm dozer blade 300 mm rubber tracks Auto shift travel Auxiliary hydraulics with Quick Couplers Blade float feature Cab light Clamp ready Control console locks Cupholder Engine/hydraulic monitor with shutdown Fingertip auxiliary hydraulic control
Horn Hydraulic joystick controls Lockable storage compartment Radio/MP3 ready Retractable seat belt Suspension seat with high back TOPS/ROPS* canopy 1 Two-speed travel Work lights (boom and upperstructure) Warranty: 12 months, 2000 hours (whichever occurs first)
1. Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117.
(A) (B) (C) (D) (E) (F) (G) (H) (H*) (I)
330.0 mm 536.0 mm 1456.0 mm 1543.0 mm 1462.0 mm 3345.0 mm 1965.0 mm 4326.0 mm 4864.0 mm 25.0 mm
(J) (K) (L) (M) (N) (O) (P) (P) (Q) (R)
1515.0 mm 2412.0 mm 300.0 mm 614.0 mm 735.0 mm 1661.0 mm 770.0 mm 840.0 mm 1949.0 mm 1675.0 mm
Options Auto idle TOPS/ROPS cab with heater Long dipperstick Additional counterweight 2nd Auxiliary hydraulics Deluxe textile suspension seat Boom safety valve with overload warning Boom & arm safety valves with overload warning
AM/FM stereo radio FOGS kit (Overhead guard) Travel motion alarm Steel tracks Beacon kit Left and right mirror kit Additional work light kit Fuel filter with transparent water separator
www.bobcat.eu ©2012 BOBCAT B 4474100-EN (03-12)
DI CE - Drève Richelle 167 - B-1410 Waterloo, Belgium
Specifications and design are subject to change without notice. Pictures of Bobcat products may show other than standard equipment.
Digging force, dipperstick (ISO 6015) Digging force, long dipperstick (ISO 6015) Digging force, bucket (ISO 6015) Drawbar pull Travel speed, low range Travel speed, high range
