Transcript
EDGEE2SCI LUMINOUS GEOMETRYTM
T5, T5HO E2 Inside Corner For use with Edge 2 Staggered
Project Name
Date
Catalog Number
Type
CONSTRUCTION Formed cold-rolled steel housing. Highly reflective die-formed white painted steel reflector, .125”
diffuse snap-in acrylic lens with matte finish, removable for lamp replacement. ELECTRICAL Standard programmed start UL listed Class P, T5 electronic, sound rated A, thermally protected, high power factor ballasts less than 10% THD, universal voltage (120-277) with 50/60Hz operation. Through wiring with quick connects standard. Standard single circuit. Integral battery packs with remote test switch are provided with 1B option. Each ballast provided with disconnects to meet luminaire disconnect code requirement. MOUNTING Edge is designed to install into acoustical grid and inaccessible ceilings. Specify entire wall to ceiling configuration below. For in-wall component, specify IW or IWS. For ceiling component, specify GX, FL, SF or NF. Inside corner units easily join to in-wall and ceiling fixtures. Grid retention brackets are standard. 4 grid retention brackets supplied for each housing. Consult factory for detailed installation instructions. FINISH Standard powder-coat textured white, metallic silver, textured black, graphite or bronze painted finish, consult factory for chip of standard paint finishes. Contact factory for additional custom color and finish options. LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted.
Utilize E2SCI Specification sheet for Specifying entire row configuration with corner.
2-1/4”
3-13/16”
Staggered Lamps
3-13/16”
YEAR LED WARRANTY
Staggered Lamps
LFL
Convertible
LED
LED
Standard Edge 2 Staggered
Convertible LFL
G1/FL: 3-13/16” G9/GS: 3-7/16”
See back page for more details. Sample Catalog #: E2SCI-1T5-8/8-IWS/G1-UNV-1C-W
L U M I N A I R E S P E C I F I C AT I O N YEAR LED WARRANTY
E2SCIHOUSING E2SCI- Edge 2 Staggered Inside 90˚ Corner, Satine Lens6
1T5__LAMPS 1T5(1) T5 1T5HO- (1) T5HO
__/__-
__/__LFL
___LED
WALL/CEILING LENGTH
WALL/CEILING MOUNTING Convertible Convertible VOLTAGE
In Wall Component Individual Units 6- 6’, 71” fixture 8- 8’, 95” fixture
In-Wall Component IW- Standard 1/2” Flange IWS- Spackle Flange
Continuous Runs1 xx’- Specify nominal overall row length in 1’ increments Ceiling Component Individual Units 6- 6’, 71” fixture 8- 8’, 95” fixture 1
Continuous Runs xx’- Specify nominal overall row length in 1’ increments
LED
Ceiling Component Acoustical Grid Ceiling G1- 1” Ceiling Grid G9- 9/16” Ceiling Grid GS- Screw Slot Ceiling Grid Inaccessible Ceiling FL- Standard 1/2” Flange SF- Spackle Flange NF- Flangeless2
LFL
120- 120 V 277- 277 V 347- 347 V5 UNV- UNV5 (120-277)
__-
__-
CIRCUITING
FINISH W- Matte White S- Metallic Silver BL- Textured Black GR- Graphite BR- Bronze CC- Custom Color
1C- Single Circuit 1D- Single Circuit Dimming3 1B- Single Circuit with Battery Pack3, 4, 5 1E- Single Circuit with Emergency Circuit3
Continuous Rows made up of both even and odd length fixtures. Ceiling fixtures designed to fall on-grid. 2NF to be utilized for metal pan / millwork ceiling. 3Some Edge configurations will not accommodate all electrical options. Consult factory. 4Integral battery pack with remote test switch is provided with 1B option. 5347 volt and UNV not available with battery pack. 6Corner available with satine lens only. 1
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239 Phone 303.322.5570 Fax 303.322.5568 www.pinnacle-ltg.com © 2016 Pinnacle Architectural Lighting®
February 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previous printed or electronic versions.
EDGE 2 / 90˚ INSIDE CORNER MOUNTING DETAILS 1” Grid Mounting Options 1” Grid Mounting Options
9/16” Grid Mounting Options 9/16” Grid Mounting Options
9/16” Grid, Standard Tile: Specify G9 in part # 9/16” Grid, Standard Tile: Specify G9 in part #
9/16” Grid, Tegular Tile: Specify G9 in part # 9/16” Grid, Tegular Tile: Specify G9 in part #
Screw Slot Mounting Screw Slot Mounting
9/16” Grid, Tegular Tile: Specify GS in part # 9/16” Grid, Tegular Tile: Specify GS in part #
Screw Slot Grid: Specify GS in part # Screw Slot Grid: Specify GS in part #
1” Grid, Standard Tile: Specify G1 in part # 1” Grid, Standard Tile: Specify G1 in part #
1” Grid, Tegular Tile: Specify G1 in part # 1” Grid, Tegular Tile: Specify G1 in part #
Flange Detail Flange Detail
Non-Flange Non-Flange
Spackle Flange Spackle Flange
Perimeter Mount Perimeter Mount
Rotating Crossbar Rotating Crossbar
Exposed Flange Detail: Specify FL in part # Exposed Flange Detail: Specify FL in part #
Metal Pan or Millwork: Specify NF in part # Metal Pan or Millwork: Specify NF in part #
Drywall, Flangeless Look: Specify SF in part # Drywall, Flangeless Look: Specify SF in part #
Bracket and Wall Rail: Specify PM in part # Bracket and Wall Rail: Specify PM in part #
Unavailable Structure Support: Specify RC in part # Unavailable Structure Support: Specify RC in part #
LAYOUT Standard Edge 2 Staggered Unit
Inside Corner Assembly
Standard Edge 2 Staggered Unit
Corner Mounting Screw
Inside Corner Assembly
Wire Chase
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239 Phone 303.322.5570 Fax 303.322.5568 www.pinnacle-ltg.com © 2016 Pinnacle Architectural Lighting®
February 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previous printed or electronic versions.
