Transcript
E32 | Compact Excavators
E32 | Specifications Working Range
Weights Operating weight with standard bucket, excluding operator Additional weight for cab with heating Additional weight for cab with HVAC Additional weight for long dipperstick Ground pressure with rubber tracks
3219 kg 121 kg 140 kg 306 kg 29.20 kPa
B C D
A
Engine Make / model Fuel Number of cylinders Displacement Maximum power at 2400 RPM (SAE J1995) Maximum net torque at 1400 RPM (SAE J1995)
H
Kubota / D1803-M-D1-E3B-BC-3 Diesel 3 1862 cm3 24.4 kW 107.4 Nm
G
I
E F
J
Performance
K
21000 N 18320 N 31500 N 34132 N 2.6 km/h 4.7 km/h
Hydraulic System Pump type Piston pump capacity Auxiliary flow Auxiliary relief
Single outlet variable displacement, load sensing torque limited pump 100.80 L/min 63.90 L/min 206.0 bar
(A) (B) (C) (C*) (D) (D*) (E) (F)
185° 5101.0 mm 4980.0 mm 5270.0 mm 2017.0 mm 2077.0 mm 376.0 mm 371.0 mm
(G) (H) (H*) (I) (I*) (J) (K) (K*)
Dimensions H
Slew System Boom swing, left Boom swing, right Slew rate
F
77° 55° 8.6 RPM
K C
Fluid Capacities Cooling system Engine lubrication plus oil filter Fuel reservoir Hydraulic system
B
8.00 L 5.20 L 53.10 L 39.70 L
I
J G
P M Q N
77 dB(A) 94 dB(A) 0.19 ms-2 0.38 ms-2
Standard Features 1520 mm dozer blade 320 mm rubber tracks Auto idle Auto shift travel Auxiliary hydraulics with Quick Couplers Selectable auxiliary hydraulic flow Blade float feature Cab light Clamp ready Control console locks Cupholder Engine/hydraulic monitor with shutdown
L
A
E D
Environmental Noise level LpA(EU Directive 2000/14/EC) Noise level LWA(EU Directive 2000/14/EC) Whole body vibration (ISO 2631–1) Hand-arm vibration (ISO 5349–1)
3708.0 mm 4804.0 mm 4985.0 mm 3437.0 mm 3618.0 mm 2136.0 mm 3117.0 mm 3417.0 mm
Fingertip auxiliary hydraulic control Horn Full fuel warning alarm Hydraulic joystick controls Lockable storage compartment Radio/MP3 ready Retractable seat belt Suspension seat with high back TOPS/ROPS* canopy 1 Two-speed travel Work lights (boom and upperstructure) Warranty: 12 months, 2000 hours (whichever occurs first)
1. Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117.
O
(A) (B) (C) (D) (E) (F) (G) (H) (H*) (I)
353.0 mm 537.0 mm 1473.0 mm 1543.0 mm 1546.0 mm 3537.0 mm 1964.0 mm 4662.0 mm 4761.0 mm 23.0 mm
(J) (K) (L) (M) (N) (O) (P) (Q) (R)
1520.0 mm 2429.0 mm 320.0 mm 371.0 mm 554.0 mm 1623.0 mm 1125.0 mm 1982.0 mm 1839.0 mm
Options Air conditioning TOPS/ROPS cab with heater Long dipperstick 2nd Auxiliary hydraulics Deluxe textile suspension seat Boom safety valve with overload warning Boom & arm safety valves with overload warning AM/FM stereo radio FOGS kit (Overhead guard)
Lifting chain kit Travel motion alarm Steel tracks Beacon kit Left and right mirror kit Additional work light kit Rubber bolt-on pads for steel tracks Special applications kit Fuel filter with transparent water separator
www.bobcat.eu ©2012 BOBCAT B 4473750-EN (03-12)
Specifications and design are subject to change without notice. Pictures of Bobcat products may show other than standard equipment.
Digging force, dipperstick (ISO 6015) Digging force, long dipperstick (ISO 6015) Digging force, bucket (ISO 6015) Drawbar pull Travel speed, low range Travel speed, high range
COMPACT EXCAVATORS
E80
E80 — SPECIFICATIONS Weights
Working Range 8380 kg 58 kg 38.25 kPa
D A
Engine Make / model Fuel Number of cylinders Displacement Maximum NET power (ISO 9249) Maximum torque at 1300 RPM
P
Yanmar / 4TNV98-ZWDB8 Diesel 4 3300 cm3 40.4 kW 248.0 Nm
H G I
E F
Performance Digging force, dipperstick (ISO 6015) Digging force, long dipperstick (ISO 6015) Digging force, bucket (ISO 6015) Drawbar pull Travel speed, low range Travel speed, high range
J K
40900 N 34100 N 54600 N 60800 N 2.9 km/h 4.6 km/h
Hydraulic System Pump type Piston pump capacity Auxiliary flow System relief pressure for auxiliary circuit 3 System relief pressure for auxiliary circuit 2 Auxiliary relief
One engine-driven tandem axial piston pump and one engine-driven gear pump 144.00 L/min 120.00 L/min 280.00 bar 250.00 bar 210.0 bar
C B
(A) (B) (B) (C) (C*) (D) (D*) (E) (F)
182° 6965.0 mm 7480.0 mm 6765.0 mm 7295.0 mm 2500.0 mm 2700.0 mm 438.0 mm 310.0 mm
H P
C
4.20 L 11.60 L 110.00 L 127.00 L 77 dB(A) 98 dB(A)
Standard Features 2300 mm dozer blade 450 mm rubber tracks Engine/hydraulic monitor with shutdown Fingertip auxiliary hydraulic control Control console locks Hydraulic joystick controls Two-speed travel Lockable storage compartment Horn Work lights Retractable seat belt Suspension seat with high back Consoles with forwards/backwards adjustable displacement
K
B
Environmental Noise level LpA(EU Directive 2006/42/EC) Noise level LWA(EU Directive 2000/14/EC)
F
70° 55° 9.6 RPM
Fluid Capacities Cooling system Engine lubrication plus oil filter Fuel reservoir Hydraulic system
5019.0 mm 6715.0 mm 7070.0 mm 4720.0 mm 5085.0 mm 3220.0 mm 3730.0 mm 4150.0 mm 4675.0 mm
Dimensions
Slew System Boom swing, left Boom swing, right Slew rate
(G) (H) (H*) (I) (I*) (J) (J) (K) (K*)
Boom and arm load holding valve Harness for rotating beacon Fully adjustable air conditioning Overload warning device Sun visor Left rear view mirror Electric refueling pump Auto idle Second auxiliary hydraulic line (Rotation piping) Auxiliary hydraulics (1st and 2nd circuits) Auxiliary lines on arm with quick couplers Warranty: 12 months, 2000 hours (whichever occurs first)
I
A L E J
D G
(A) (B) (C) (D) (E) (F) (G) (H) (H*)
440.0 mm 737.0 mm 1715.0 mm 2200.0 mm 1912.0 mm 4797.0 mm 2823.0 mm 6167.0 mm 6260.0 mm
(I) (J) (K) (L) (M) (N) (O) (P) (Q)
20.0 mm 2300.0 mm 2638.0 mm 450.0 mm 655.0 mm 803.0 mm 2500.0 mm 1298.0 mm 2450.0 mm
Options Steel tracks Long dipperstick Third auxiliary hydraulic line (Clamshell Piping)
www.bobcat.eu ©2014 BOBCAT B4475200-EN (09-14)
DI CE - Drève Richelle 167 - B-1410 Waterloo, Belgium
Specifications and design are subject to change without notice. Pictures of Bobcat products may show other than standard equipment.
Operating weight with standard bucket, excluding operator Additional weight for long dipperstick Ground pressure with rubber tracks