E74 Crt Monitor Displays Clear Images On A Large Screen

Transcript

Hardware Announcement April 11, 2006 E74 CRT Monitor displays clear images on a large screen Overview The E74 CRT Monitor is suitable for home or office applications, including: Benefits • • At a glance Reduced energy consumption Clear images with minimal reflection Features of the E74 CRT Monitor include: Key prerequisites • • Features This monitor operates with many compatible PC systems. Most VGA, SVGA, and XGA applications will run without modification. Optimum addressability of 1024 x 768 at 85 Hz refresh for flicker-free viewing Compliant with Microsoft  Windows 2000, Windows Me, and Windows NT4 • Availability date • Multifrequency operation with easy-to-use on-screen display (OSD) user controls • Video Electronics Standards Association (VESA) Display Data Channel (DDC) Plug and Play for quick and easy setup 1 • MPR-II compliance and International Organization for Standardization (ISO) Standard 9241, Parts 3, 7, and 8 capability for front-of-screen ergonomics 1 • Universal voltage power supply • • • • • • Word processing E-mail/data entry Spreadsheets Business graphics 17-inch (432-mm) CRT with a viewable image size of 16.0 inches (406 mm), incorporating a 0.27 dot pitch April 11, 2006 Maximum horizontal frequency of 69 kHz for flicker-free operation at a recommended 1024 x 768 pels at 85 Hz, with a maximum addressability of 1280 x 1024 pels at 60 Hz VESA DDC capability for Plug and Play and asset tracking for DDC-enabled attaching system unit hardware and software • Timings for the VESA 85 Hz refresh rate display modes for 640 x 480, 800 x 600, and 1024 x 768 addressabilities • Universal power supply providing worldwide operating capability • A minimum of MPR-II compliance • Available in business black 1 PC system hardware- and software-dependent Note: Appropriate graphics adapter hardware and software must be installed in the attaching system unit. This announcement is provided for your information only. 800-426-4968, or visit http://www.lenovo.com. Lenovo United States For additional information, contact your sales representative, call Lenovo is a trademark of Lenovo 106-252 Description you customize the current mode settings of the monitor, changes are saved automatically. VESA DDC Ergonomic features The monitors have the following ergonomic features: This monitor supports the VESA DDC protocol to level 1/2B. Basic configuration information can be passed to a system unit from its attached monitor. Often referred to as Plug and Play, the protocol allows a DDC-enabled system unit to automatically configure the video adapter to drive the attached monitor at its optimum display mode without end-user intervention. For effective optimization, the attaching system unit must also be hardware- and software-enabled for DDC operation. The capabilities of the monitor are held in nonvolatile monitor memory in an encoded format. The data is received from the monitor by the system unit during boot up and system configuration. The Extended Display Identification Data (EDID) sent by the monitor to the attached system unit also includes the monitor′s serial number and other identification information. This can be held in the system unit until requested; for example, by a department LAN administrator needing to assess the location of all equipment connected to the LAN. 2004 2005 14 15 • Antireflective screen treatments to minimize glare without sacrificing picture sharpness • Compliance with the ISO 9241 Parts 3, 7, and 8 for front-of-screen ergonomics when forming part of an ISO-compliant system • Compliance with SWEDAC MPR-II Guidelines for low-electric, magnetic, and electrostatic emissions CRT Type CRT Size (nominal) Viewable Image Size Dot Pitch Maximum Viewable Area -- Height Maximum Viewable Area -- Width Antireflective Antistatic Borderless operation Multi-frequency operation ID Bits VESA DDC Capable Horizontal frequency Vertical frequency Clock rate Maximum Resolution Maximum Flicker-Free Resolution Recommended Resolution User controls On screen display Preset Display Modes User-settable Display Modes ISO 9241/3 Capable VESA DPMS Power management MPR-II Emission EU Directive 2002/95/EC-RoHS Video connector The microprocessor-controlled, multifrequency operation of the monitor enables users to migrate from VGA through SVGA to XGA. Power-management capability The power-management functions are invoked when initiating signals are received from an attached system unit or installed graphic adapter card that also uses the VESA Display Power Management Signaling (DPMS) standard. The availability of power management helps minimize the energy requirements of the monitor. This can have an immediate, advantageous effect for those who need to reduce energy consumption. FST 17 inch 16.0 inch (406 mm) 0.27 mm 243 mm 320 mm Yes Yes Yes Yes See notes 1/2B 30-69 kHz 50-130 Hz 110 Mpels/sec 1280 x 1024 at 60 Hz 1024 x 768 at 85 Hz 1024 x 768 at 85 Hz OSD Yes -- 6 Languages 9 8 Yes Yes Yes Yes 15-pin D Note: To present “1010” ID bits at the monitor interface, the DDC operation of these monitors must be disabled. A separate signal cable adapter (P/N 96G2693) is required to provide “1010” ID bits at the monitor interface for systems that require ID bits. Comprehensive on-screen user controls The microprocessor-based OSD combined with the digital controls lets you fully control: Tilt-swivel stand characteristics Image position, size, shape, and alignment Image brightness and contrast Color point adjustment Geometry and color recall Manual degauss • Tilt: +14/-4° (14° backward, 4° forward) • Swivel: +90/-90° (90° left, 90° right) This monitor has OSD type controls. They are accessed by using button controls that are located on the front bezel. Control functions are displayed in six languages: Key button user controls are located on the front bezel, to the left of the power on/off pushbutton. Adjustments are made in conjunction with the on-screen display. When 106-252 VESA DDC capability to automatically select the optimum display modes when attached to a DDC-enabled system Technical characteristics Multiattachment flexibility • • • • • • HelpWare is a comprehensive set of service and support offerings for a more productive and enjoyable computing experience. Many HelpWare services are included with the purchase of your Lenovo  system, and additional services are available from the HelpWare support family. Value stored = (YOM — 1990) Value stored Recommended for use at maximum addressability of 1024 x 768 at 85 Hz for flicker-free viewing HelpWare Date information transmitted in the monitor EDID conforms to VESA EDID Standard Version 2. This requires the year of manufacture (YOM) to be stored in a one-byte field as an offset from 1990 as derived from the following equation: Year of manufacture • • -2- English • • • • • Trademarks French German Spanish Portuguese Italian HelpWare is a registered trademark of International Business Machines Corporation in the United States or other countries or both. Microsoft is a trademark of Microsoft Corporation. Lenovo is a trademark of Lenovo in the United States, other countries, or both Other company, product, and service names may be trademarks or service marks of others. Control • • • • • • • • • • • • • • • • • • • Contrast Brightness Horizontal size Vertical size Horizontal centering Vertical centering Pincushion Trapezoid Image rotation Geometry recall Degauss Color point adjustment R,G,B control Color point recall Selectable color points Picture zoom Moire control Parallelogram Pin balance A power on/off pushbutton is located at the bottom right of the bezel. The monitors are automatically degaussed whenever they are switched on. In addition, users can perform a degauss operation during use, to improve image color purity, using the degauss function. Indicators The E74 CRT Monitor provides improved OSDs to assist in the operation of user controls by indicating both the real-time adjustments being made, and the horizontal and vertical frequencies for the current display mode. The following LED indicates the operational state of the monitor: Power indicator Operating state Steady Green Orange Orange Orange Normal operation VESA DPMS Standby state VESA DPMS Suspend state VESA DPMS Off state Accessibility by people with disabilities This monitor supports these Lenovo accessibility attributes for normal and routine end-user operations. • Usable by people with disabilities without requiring an end-user to attach assistive technology to the product • Controls and latches reachable and operable with one hand and minimal dexterity • Push buttons tactilely discernible without activation • Capable of flicker-free operation when attached to a video adapter and set to flicker-free display properties • Uses color as an enhancement, not as the only way to convey information or distinguish keys, controls, and labels • Icons consistent throughout the OSD user interface • Text and objects in the monitor OSD blink no faster than 2 Hz • User′s Guide available in electronic format, viewable from a standard Web browser -3- 106-252 United States Announcement Supplemental Information April 11, 2006 Services IBM Integrated Technology Services IBM services include business consulting, outsourcing, hosting services, applications, and other technology management. These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for Lenovo  and many non-Lenovo offerings. For details on available services, contact your IBM representative or visit http://www.ibm.com/services/ For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit http://www.ibm.com/services/continuity For details on education offerings related to specific products, visit http://www.ibm.com/services/learning/index.html Select your country, and then select the product as the category. Technical information Physical specifications: Approximate dimension and weight of the monitors are: Monitor unpacked Height Width Depth 402 mm (15.8 in)(2) 410 mm (16.1 in) 420 mm (16.5 in) Weight 15.5 kg (34.1 lb) 2 Monitor packed 537 mm (21.1 in) 540 mm (21.3 in) 570 mm (22.4 in) 19.0 kg (41.8 lb) Operating environment Conservation: Energy can be saved by switching the monitors off overnight and whenever they are not in use. Power requirements Measurement Value Input voltage (UV) 50/60 Hz Maximum heat dissipation Maximum power consumption 68 watts Power consumption (VESA Standby) Power consumption (VESA Suspend) Power consumption (VESA Off) Maximum earth leakage current 90-264 V ac 255 Btu/hr < < < < 4 watts 4 watts 2 watts 3.5 mA at 264 V ac Actual power consumption depends on the screen mode used, the images displayed, and how user controls are set. Ambient temperature and relative humidity Measurement Operating Shipping Storage Temperature 0 to 40 deg.C -25 to 70 deg.C -10 to 60 deg.C Relative humidity 10 to 85% 5 to 98% 5 to 85% The higher level of humidity for shipping allows for condensation but not direct contact with moisture. Altitude: 3,000 m (10,000 ft) maximum Acoustics: Declared acoustical noise emissions LWAD = 4.5 bels, or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10, and reported in conformance with ISO/DIS 7779. Ergonomics: Compliance to the International Organization for Standardization (ISO) Standard 9241 Parts 3, 7, and 8 for front-of-screen ergonomics are provided when the product forms part of an ISO-compliant system. Includes Tilt/Swivel Stand To ensure installability and serviceability, review the installation planning information for any product specific installation requirements. Standards: This monitor complies with MPR-II. This announcement is provided for your information only. United States 106-252 Regulatory agency approvals Notes This monitor meets: • Agency approval Models Safety: UL 1950 First Edition (USA) CSA C22.2 No. 950 (Canada) IEC 950 CB Report NEMKO (Norway) NOM (Mexico) TUV-GS CCC (PRC) CE Mark (Europe) PSB (Singapore) All All All 6332-BCN 6332-BCE All 6332-BCN All 6332-BCE EMC: FCC Class B (USA) All IC (Canada) 6332-BCN CE (Europe) All MIC (South Korea) 6332-BCN BSMI (Taiwan) 6332-BCN C-Tick (Australia/New Zealand) 6332-BCS EN 61000-3-2 (China) 6332-BCN • • only only The preset modes cannot be overwritten, but can be adjusted to personal choice. The new settings are automatically stored in one of the user locations and are recalled each time that mode is used. The factory settings for the mode in use, if any, can be restored by operating the Geometry Recall control. only only It may be necessary to make some adjustments to the displayed picture to compensate for variations in video signal timings. The user controls can be used to make these adjustments. only only only only only X-Ray: DHHS (USA) DNHW (Canada) All 6332-BCN only Ergonomics/environmental: MPR-II (Sweden) GS (Germany) ISO 9241-3 ISO 9241-8 EU Directive 2002/95/EC-RoHS CSC (China) All All All All All 6332-BCN only Compatibility: Windows(TM) 2000 All Compatibility: This monitor is supplied with an attached video signal cable. This cable has the same 15-pin, D-shell video connector for system unit connection as previous monitors. This model has been tested with Lenovo systems and is compatible with systems and graphics adapters that comply with the relevant parts of “VESA and industry standards and guidelines for computer display monitor timing” V1.8, adopted September 17, 1998. Supported display modes and number of colors are a function of the attaching system unit. The full range of display modes, refresh rates, and number of colors available with this monitor may not be available or supported with all combinations of system units, their operating systems, and application software. Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective. Note: NEMKO, SEMKO, FIMKO, and DEMKO by virtue of the Copenhagen Agreement. Hardware requirements: This monitor is designed to operate with system units or graphic adapters that generate a video output signal that falls within the specifications: Parameter Monitor Maximum resolution Recommended resolution Horizontal frequency range Clock rate Vertical frequency range 1280 x 1024 @ 60 Hz 1024 x 768 @ 85 Hz 30 — 69 kHz 110 Mpels/sec 50 — 130 Hz Limitations Horizontal and vertical sync-signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in horizontal and vertical sync timings for any display mode cannot be stated. Software requirements: This monitor features preset and user-settable display modes. The actual display modes that are used are a function of the attaching system unit, its operating system, and application software. • Not all available display modes run at the high refresh rates necessary for flicker-free performance. Display modes at lower refresh rates are available for compatibility with older graphics adapters and system units. • Supported display modes are a function of the attaching system unit. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, and application software. • Horizontal and vertical sync-signal timings are critical to achieving acceptable screen images. As a consequence, support for all possible variations in horizontal and vertical sync timings for any display mode cannot be stated. • The number of colors shown in any display mode is not limited by the monitor, but depends on the capabilities of the adapter the monitor is attached to. • Mains harmonic reduction is only effective during normal operation and not during power management. • The power-management function is invoked only after initiating signals are received from the attached system unit or graphics adapter. The method used to implement power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit or graphics Preset display modes Addressability Refresh Standard 640 640 720 800 800 1152 1024 1024 1280 60 85 70 75 85 75 75 85 60 VESA Standard VESA Standard Industry Standard VESA Standard VESA Standard VESA Standard VESA Standard VESA Standard VESA Standard x x x x x x x x x 480 480 400 600 600 864 768 768 1024 Hz Hz Hz Hz Hz Hz Hz Hz Hz NI NI NI NI NI NI NI NI NI Preset display modes: 9 User-settable display modes: 106-252 VESA = Video Electronics Standards Association (VESA) NI = non-interlaced The “Preset Display Modes” table indicates if the Preset Display Mode is a VESA standard or an industry standard. 8 -2- adapter for effective. • • monitor power management to carton that contained the replacement unit and return to Lenovo. be Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective. Transportation charges, both ways, are paid by Lenovo. Failure to use the carton in which the replacement unit was received could result in charges incurred by the customer for damage to the failed unit during shipment. Not all system units are DDC-enabled. In this situation, the user must configure the system to obtain optimum performance from the system/graphics adapter/monitor combination. International Warranty Service (IWS): IWS is available during the warranty period to customers who travel or relocate to countries where their computer is sold and serviced by a service provider authorized to perform warranty service. Eligible Lenovo computers are identified by their four-digit machine type. Planning information Customer responsibilities: The monitor is designated as customer setup. Instructions are provided in the User ′ s Guide which is supplied with the monitor. You can obtain IWS through the method of service, such as CRU, depot, carry-in, or on-site, provided in the servicing country. Service methods and procedures vary by country, and some service or parts may not be available in all countries. Service centers in certain countries may not be able to service all models of a particular machine type. In addition, some countries may have fees and restrictions that apply at the time of service. Cable orders: An attached video signal cable is supplied. It is 1.5-meters (4.9-ft) long with a 15-pin, mini D-shell connector. Packaging: One box Shipment group • • • • • • Note: Due to the earth′s magnetic field, CRT monitors are manufactured to work in northern, southern, and equatorial regions of the earth and may not produce a satisfactory image when moved between them. Any required adjustment (if possible) is not covered under IWS and may be subject to a chargeable action. The magnetic field does not affect flat-panel LCD monitors and ThinkPad LCD displays. E74 Monitor Attachable tilt-swivel stand Attached video signal cable Separate power cord User′s Guide Diskette containing .INF, .ICM, Files plus ReadMe and multilingual warranty statements Licensing: Programs included with this product are licensed under the terms and conditions of the License Agreements that are shipped with the system. Security, auditability, and control These products use the security and auditability features of the system unit to which they are attached. ThinkPlus services The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. Warranty and maintenance options: The announced products may be eligible for ThinkPlus Maintenance Services, convenient prepackaged offerings for warranty service upgrades and maintenance services. Terms and conditions IBM Global Financing: No Installation services: The announced products may be eligible for ThinkPlus Installation Services, convenient prepackaged offerings for installation services. To obtain copies of the Lenovo Statement of Limited Warranty, contact your reseller or Lenovo. Refer to the Prices section for information on the availability of ThinkPlus Services. In the United States, call 800-426-7378 or write to: Field-installable features: No Warranty Information P.O. Box 12195 Research Triangle Park, NC 27709 Attn: Dept UF2A/B203 Model conversions: No Machine installation: Customer setup. Customers are responsible for installation according to the instructions Lenovo provides with the machine. Warranty period: Three years Graduated Program License Charges apply: No. This product does not contain licensed internal code or licensed machine code. Warranty service: Customer carry-in or mail-in using Rapid Replacement Service If warranty service is required, call the Customer Support Center. The Customer Support Center will assist with problem determination and initiate shipment of a replacement unit, if needed, to the customer′s location by express delivery. For calls received by 5:00 p.m. customer′s time, in most cases, the replacement unit will arrive within two business days (excluding holidays). The replacement unit becomes the property of the customer in exchange for the failed unit, which becomes the property of Lenovo. Pack the failed unit into the shipping Prices Description Lenovo E74 CRT Monitor -3- Machine type/ model Part number 6332-BCN 6332BCN 882861-29996-6 $149 UPC List price(3) 106-252 3 List price does not include tax or shipping and is subject to change without notice. Reseller prices may vary. ThinkPlus services for warranty and maintenance The offerings apply to all models of machine type 6332-BCN. Part number Description 3-year IOE 9 x 5 3-year IOE 24 x 7 4-hour average response 4-year IOE 9 x 5 4-year IOE 24 x 7 4-hour average response 41C9209 41C9212 41C9217 41C9218 ThinkPlus MA for post warranty Description Part number 1-year 1-year 2-year 2-year 41C9300 41C9301 41C9320 41C9321 IOE IOE IOE IOE 9 x 5 NBD 24 x 7 9 x 5 NBD 24 x 7 IBM Global Services is the preferred, authorized warranty service, warranty service upgrade, and post-warranty service provider for Lenovo products (excluding mainland China). For ServiceElect (ESA) Maintenance Service Charges, contact IBM Global Services at 888-426-4343. Trademarks Windows is a trademark of Microsoft Corporation. Lenovo and ThinkPlus are trademarks of Lenovo in the United States, other countries, or both ThinkPad is a registered trademark of Lenovo in the United States, other countries, or both Other company, product, and service names may be trademarks or service marks of others. 106-252 -4-