Transcript
GARMIN NUVI 200 WIDE SERIES RAM® LOCKING CRADLE ASSEMBLY INSTRUCTIONS PARTS INDEX: A. BACK CRADLE (QTY. 1) B. FRONT COVER (QTY. 1) C. 90-DEGREE USB SPACER (QTY. 1) D. #4-40 X 5/8” MACHINE SCREW (QTY. 4) E. #4-40 BLACK NYLOCK NUT (QTY. 4) F. #8-32 X 3/4” MACHINE SCREW (QTY. 2) G. #8-32 X 5/8” MACHINE SCREW (QTY. 2) H. #8-32 X ½” MACHINE SCREW (QTY. 2) J. #8-32 NYLOCK NUT (QTY. 2)
A
B
D
J
C F
G
H
E
BEFORE CONNECTING YOUR GARMIN DEVICE, ATTACH (A) BACK CRADLE TO YOUR RAM MOUNT KIT USING (F, G, or H) SCREWS AND (J) NUTS, DEPENDING ON THE APPROPRIATE LENGTH FOR YOUR MOUNT.
SECURING USB CABLE FOR 90-DEGREE USB CABLE: INSERT USB CABLE THROUGH BACK OF (A) CRADLE AND CONNECT TO YOUR GPS. POSITION (C) USB SPACER IN BACK POCKET OF CRADLE.
ASSEMBLING LOCKING CRADLE
1. PLACE GPS IN (A) BACK CRADLE AND COVER WITH (B) TOP FOR STRAIGHT USB CABLE: COVER. VERIFY THAT ALL PORTS AND SWITCHES OF GPS ARE CONNECT USB CABLE TO GPS WHEN ACCESSIBLE, AND RAM LOGO FACES UPRIGHT WITH GARMIN ASSEMBLED IN CRADLE. SLOTTED LOGO. HOLES BELOW CABLE ALLOW A ZIP TIE 2. SECURE ALL 4 CORNERS OF LOCKING CRADLE ASSEMBLY (NOT INCLUDED) TO SECURE CABLE USING (D) SCREWS AND (E) NUTS. IN PLACE.
C
D
SPACER MAY NOT BE NEEDED DEPENDING ON CABLE TYPE RAM Mounting Systems 8410 Dallas Ave S Seattle, WA 98108 Phone: (206) 763-8361 Fax: (206) 763-9615 www.rammount.com
[email protected]
FOR EXTRA SECURITY, (D) SCREWS AND (E) NUTS MAY BE REPLACED BY SPECIAL SECURITY HARDWARE.
RMR-INS-GA25L
STORE ANY UNUSED HARDWARE AND COMPONENTS FOR POSSIBLE FUTURE USE
GARMIN NUVI 200 WIDE SERIES RAM® LOCKING CRADLE ASSEMBLY INSTRUCTIONS PARTS INDEX: A. BACK CRADLE (QTY. 1) B. FRONT COVER (QTY. 1) C. 90-DEGREE USB SPACER (QTY. 1) D. #4-40 X 5/8” MACHINE SCREW (QTY. 4) E. #4-40 BLACK NYLOCK NUT (QTY. 4) F. #8-32 X 3/4” MACHINE SCREW (QTY. 2) G. #8-32 X 5/8” MACHINE SCREW (QTY. 2) H. #8-32 X ½” MACHINE SCREW (QTY. 2) J. #8-32 NYLOCK NUT (QTY. 2)
A
B
D
J
C F
G
H
E
BEFORE CONNECTING YOUR GARMIN DEVICE, ATTACH (A) BACK CRADLE TO YOUR RAM MOUNT KIT USING (F, G, or H) SCREWS AND (J) NUTS, DEPENDING ON THE APPROPRIATE LENGTH FOR YOUR MOUNT.
SECURING USB CABLE FOR 90-DEGREE USB CABLE: INSERT USB CABLE THROUGH BACK OF (A) CRADLE AND CONNECT TO YOUR GPS. POSITION (C) USB SPACER IN BACK POCKET OF CRADLE.
ASSEMBLING LOCKING CRADLE
1. PLACE GPS IN (A) BACK CRADLE AND COVER WITH (B) TOP FOR STRAIGHT USB CABLE: COVER. VERIFY THAT ALL PORTS AND SWITCHES OF GPS ARE CONNECT USB CABLE TO GPS WHEN ACCESSIBLE, AND RAM LOGO FACES UPRIGHT WITH GARMIN ASSEMBLED IN CRADLE. SLOTTED LOGO. HOLES BELOW CABLE ALLOW A ZIP TIE 2. SECURE ALL 4 CORNERS OF LOCKING CRADLE ASSEMBLY (NOT INCLUDED) TO SECURE CABLE USING (D) SCREWS AND (E) NUTS. IN PLACE.
C
D
SPACER MAY NOT BE NEEDED DEPENDING ON CABLE TYPE RAM Mounting Systems 8410 Dallas Ave S Seattle, WA 98108 Phone: (206) 763-8361 Fax: (206) 763-9615 www.rammount.com
[email protected]
FOR EXTRA SECURITY, (D) SCREWS AND (E) NUTS MAY BE REPLACED BY SPECIAL SECURITY HARDWARE. STORE ANY UNUSED HARDWARE AND COMPONENTS FOR POSSIBLE FUTURE USE
RMR-INS-GA25L
