Preview only show first 10 pages with watermark. For full document please download

Easy Setting Guide

   EMBED


Share

Transcript

Easy Setting Guide Blu-ray Disc Home Theater Sound System Model No. SC-BT735 The order of setting 1 2 Prepare the speakers 3 Place the speakers See below See below 1 4 Connect the cables See over See over 2 Prepare the speakers Speakers Front speakers Front/Avant Center/Centre Surround speakers Surround/Ambiophonie Front/ surround speaker Step 1  Back of the base  2 Step 3 Label each speaker cable by attaching the numbered sticker at the position indicated in the illustration. Be sure to match the number on each sticker with the circled number in the illustration.  PURPLE Centre speaker GREEN Insert the wire fully, taking care not to insert beyond the wire insulation. 1 RED L R C : White : Blue line PURPLE BLUE 3 Front speakers  Press into the groove.  Tighten securely. SW LS GREY Surround speakers Rch Lch Rch Lch RED WHITE GREY BLUE WHITE FRONT Lch Main unit’s front panel  Base Subwoofer e.g., Front speaker Lch Place the speakers GREEN Step 2 Leave about 80 mm Tighten securely. See Smart setup screen WHITE PUSH! 1 Smart setup SETUP MIC  Stand Pull the cable straight along the line and slide into the groove.  e.g., Refer to the rear label of the speaker before connecting the corresponding cable. Verify the type of speaker with the label on the rear of the speaker.  Centre speaker Turn on the main unit Auto speaker setup microphone (included) Place the Auto speaker setup microphone at the actual seating position. (At ear level when seated.) Recommended Front speakers (L, R) → speaker RS Surround speakers (LS, RS) Step 4 Connect the speaker cables. White Insert the wire fully, taking care not to insert beyond the wire insulation. : White : Blue line PUSH! Blue line 60       120 VQC7596 F0310RE0 VQC7596_eng.indd 2-3 2010/03/15 17:26:27 3 Other connection Connect the cables For detailed information, refer to the operating instructions. Broadband Network Connections (Optional) Connect the cables by colour or by the numbers indicated in the illustration to the appropriate terminals on the rear panel of the unit. PURPLE GREEN   RED WHITE   GREY By connecting this unit to the network, you can use the BD-Live and VIERA CAST*2 features. BLUE  *2 South East Asia only FM indoor antenna (included) Adhesive tape  Main unit LAN 5 6Ω NTER DIGITAL AUDIO IN OPTICA 2 1 R 3Ω L FRONT 4 3 R 3Ω L SURROUND 1 2 AV OUT  6 5 6Ω 6Ω SUBWOOFER CENTER OPTICAL L  (10BASE-T/ 100BASE-TX) Shielded LAN cable (not included) R ASE-T/ ASE-TX) (ARC) VIDEO OUT AUX X FM ANT (75Ω) Main unit’s speaker terminals (rear panel) HDMI cable (not included) (Recommended for highest quality picture) AV IN Video cable*1 (included) VIDEO IN TV *1 Make sure that the video cable connection is made to view photos/videos from the iPod/iPhone. Audio cable (not included) L AUDIO OUT R Optical digital audio cable (not included) OPTICAL OUT 4 1 Audio connection For best quality audio, use the HDMI cable (with an ARC compatible TV) or an optical digital audio cable. If your TV does not support the above, use the audio cable. Modem (Broadband) • Provided by ISP Broadband router, etc. Turn on the main unit Connect the AC mains lead Connect the AC mains lead to the main unit before connecting to the household mains socket. Main unit Before connecting the AC mains lead; Set the voltage. AC IN VOLT ADJ 110 127V 220 240V V AC mains lead (included) Turn on your TV and select the appropriate video input mode (e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit. 3 4 Turn on the main unit The Smart setup starts The on screen display will guide you through the steps.*3 Press [ ] to turn on the main unit. Smart setup Would you like to start smart setup? Yes No OK  Installing batteries in the remote control [The\Middle\East] For Thailand VQC7596_eng.indd 4-5 Turn on the TV Use a flat-head screwdriver to move the voltage selector to the appropriate position for the area in which this system is used. [South\East\Asia] To a household mains socket 2 For Saudi Arabia and Kuwait RETURN  R6/LR6, AA Press [, ] to select [Yes]. *3 If you want to restart the Smart setup: Refer to “STEP 5: Smart setup / Easy setup” in the operating instructions. 2010/03/15 17:26:27