Transcript
Modular Converter Solutions 19”, 3U Sub-racks for Plug-in DC–DC Converter Modules
MCS6, 6 converter sub-rack
MCS3, 3 converter sub-rack, featuring a Digital Monitor Panel
Features
19” sub-rack
Modular 3U/6U and expandable option
Facilitates cost-effective n+1 deployment
Suits plug-in d.c.-d.c. converter modules
Compatible with 3U/4U distribution sub-racks for input and output distribution (protection and/or isolation)
The back-plane may be separated into (6) individual (and isolated) converter sections. This allows a single sub-rack to accommodate different polarity, or voltage, converters Converter and back-plane connectors are keyed to prevent plug-in of incompatible converters
Converters are fully isolated input to output
Wide range of converter modules available
Provision for accessories module (metering, alarms)
Powerware Modular Converter Solutions are the ideal solution for low to medium power d.c. to d.c. conversion applications that require compact, efficient and flexible d.c. power solutions. These 19” rack mount sub-racks are available in two basic configurations. The MCS6 is a 6 converter bay sub-rack. It can be used with additional sub-racks to increase the output power. The MCS3 is a 3 converter bay sub-rack that features a 6 way miniature circuit breaker (MCB) cage
The back-plane may be separated into individual converter sections to allow the sub-rack to accommodate different polarity or voltage rated converters in the same sub-rack (eg 48V/12V and 48V/12V, or 48V/-24V and 48V/+24V). Digital and analogue metering options are available. In the MCS6 the meter panel will take up a converter position. In the MCS3 the meter panel will be on the right hand side of the MCB cage.
Technical Specification Brief Technical Specifications Mechanical Format Dimensions Weight Capacity - MCS6 Capacity - MCS3
19” sub-rack in accordance with IEC 60297-3 Din 41494, part 5 19” 3U, 483(w) x 133(h) x 260(d) mm 3 kg up to 6 x converters and 1 x accessory module up to 3 x converters, 6 x 18mm MCBs and meter panel
Electrical Converter Module connector Accessory Module connector Accessory Interface connector Input terminals Output terminals Alarm connector Input voltage metering connector Output voltage metering connector
Din 41612H15 (30A per module) Din 41612C64ac (1A max per pin) 34 pin IDC header (1A max / pin) M6 screw x2 (200A) M6 screw x2 (200A) Camden CTB1301 style 2 way (2.5mm) Phoenix MSTB style 2 way (2.5mm) Phoenix MSTB style 2 way (2.5mm)
Protection Input voltage metering Output voltage metering
0.9 A polyswitch (60V) in both poles 0.9 A polyswitch (60V) in both poles
Environment Cooling Operating temperature EMC
convection 0 – 55 °C AS3548, CISPR 22 class B
Product Range and Accessories MCS6
19”, 3U, 6 converter bay sub-rack
MCS3
19”, 3U, 3 converter bay sub-rack with output MCBs
MCS-BP
Blank front panel for spare MCU positions
MCS-AM
Analogue Monitor Panel (suits MCS3 and MCS6)
MCS-DM
Digital Monitor Panel (suits MCS3 and MCS6)
MCS-AR
Alarm Relay Card (suits MCS3 and MCS6)
MCU-xxyy
DC-DC Converter Unit, where xx = Vin and yy = Vout, & Vin options = 110 V, 48 V, 24 V, 12 V, Vout options = 48 V (300 W), 24 V (300 W), 12 V (250 W) special Vout options can include 32 V
1U Venting panel
1U, 19” blank panel
1U Vented duct
1U, 19” (directs air from front of rack to rear of rack)
IEE0215-1-017
MCS6 User’s Guide, DCDC Converter Sub-rack
IEE0511-007
MCS3 User Manual Email:
[email protected] Internet: www.powerware.com
MCS A
