Transcript
Product Information
CompactPCI ® Express (PXI Express™) • EB3-TONE Quad Port USB 3.0 Hostadapter Document No. 8150 • 8 September 2016
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter General
The EB3-TONE is a peripheral slot board for CompactPCI® Express (aka PXI Express™) systems, equipped with a quad port USB 3.0 host controller. All four USB connectors are available from the front panel for attachment of external USB devices.
The EB3-TONE can be installed into any peripheral slot of a CompactPCI® Express or PXI Express™ backplane. The front panel USB 3.0 host connectors can deliver up to 1.5A VBUS (+5V) each.
EB3-TONE
© EKF
-2-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter Feature Summary General < < < < < < <
PICMG® CompactPCI® Express standard (EXP.0) peripheral slot card type 1 or type 2 PXI Express™ peripheral slot card Single Size Eurocard 3U 4HP 100x160mm2 Backplane connectors XJ3, XJ4 (type 2 peripheral slot) Option backplane connector XP1+12V power (type 1 peripheral slot) CompactPCI® Express backplane connector XJ4 with F2 key for CompactPCI® Express & PXI Express™ systems (F1 key available on request) PCIe x 1 upstream - Gen2 (5.0Gbps) required for optimum performance
USB Interfaces < < < < < <
Texas Instruments PCI Express® to quad-port USB 3.0 controller TUSB7340 PCI Express® x 1 Gen2 interface for optimum performance USB 3.0 xHCI (eXtensible host controller interface) SuperSpeed supported USB 2.0 high-speed, full-speed, low-speed supported 4 x front panel Type A USB 3.0 host connectors VBUS (+5V) 1.5A high current power switches individually assigned to front panel connectors (may require a backplane slot populated w. XJ1 power connector, dependent of the total external load via VBUS)
Environment & Regulation < < < < < < < < < < < < <
© EKF
Designed & manufactured in Germany ISO 9001 certified quality management Long term availability Rugged solution (coating, sealing, underfilling on request) RoHS compliant Operating temperature: -40°C to +85°C (industrial temperature range) Storage temperature: -40°C to +85°C, max. gradient 5°C/min Humidity 5% ... 95% RH non condensing Altitude -300m ... +3000m Shock 15g 0.33ms, 6g 6ms Vibration 1g 5-2000Hz MTBF 65.8 years EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
-3-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter
Application Example - Vision System w. EB3-TONE
© EKF
-4-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter Block Diagram
Front Panel I/O
USB 3.0 SuperSpeed USB 2.0 High/Full/Low
TPS2060
Power Switch Power Switch
Simplified Block Diagram
EB3-TONE USB 3.0 Controller
CompactPCI® Express • PXI Express™
TUSB7340
to
PCIePCIe
USB 3.0 xHCI
Quad Port Controller
PCIe
CompactPCI® Express Type 1/2 Peripheral Board PXI Express™ Peripheral Module
+12V I/O
PCI Express® Gen2
Option +12V
Peripheral Slot
XJ4
XJ3
XJ2
XP1
Backplane CompactPCI® Express PXI Express™
ekf.com
-5-
© EKF
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter Front Panel
USB 3.0
2
3
© EKF • draft - do not scale • ekf.com
1
4
EB3-TONE
LED Function Green - USB Power
© EKF
-6-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter Please note: The front handle is provided with a built-in microswitch, which is used to disable the onboard power circuit when released. Vice versa, the on-board devices are enabled not before the handle gets locked. Please refer to the illustration below and make sure that the eject lever has reached its final position for proper board operation, as shown in picture 8. A gentle click should be audible, when the red actuator pin moves into its raised position, indicating that the board is locked and ready for use.
5
2
© EKF • ekf.com
1
6
3
7
4
8 1 - 4: remove board 5 - 8: install board 1 & 8: on-board power enabled 2-7: on-board power disabled
© EKF
-7-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter Front Panel Connectors The EB3-TONE is equipped with four front panel receptacles for USB 3.0 or USB 2.0 type A cable connectors (USB root hub). When connected to USB 2.0 compliant devices, only the classic 4 contacts (data pair, +5V VBUS and GND) are in use. USB 3.0 devices in addition communicate via the SuperSpeed differential transmit and receive signal pairs, available across another 5 contact pins. Since all four EB3-TONE USB ports share a common SuperSpeed xHCI controller, do not expect the maximum USB 3.0 data transfer rate to be available on all connectors simultaneously.
© EKF • ekf.com
270.23.09.1
USB 3.0 Receptacles
1
4
9
5
1
VBUS +5V 1.5Amax
2
USB D-
3
USB D+
4
GND
5
SS RX-
6
SS RX+
7
GND
8
SS TX-
9
SS TX+
Each EB3-TONE USB connector provides +5V (VBUS) for powering external devices. Electronic switches limit the maximum output current of each individual USB connector to a safe level. Front panel LEDs are provided to indicate the power state and initialization status of each F/P USB port. Please note, that VBUS is generated by an on-board +12V to +5V DC/DC power converter. In total, up to >6A nominal output current can be sourced via the USB connectors. Since CompactPCI® Express type 2 peripheral slot cards are not equipped officially with the high current power connector XP1, only two +12V power pins are in use on the XJ4 connector normally (rated 1A max. each). In order to establish a higher current +12V power rail, the EB3-TONE can be populated with the power connector XP1, which would be mandatory for CompactPCI® Express type 1 peripheral slots. There are CompactPCI® Express backplanes available which have the complementary XJ1 also stuffed for type 2 slots. In a PXI Express™ system however, the XP1 power connector (if populated on the EB3-TONE) would collide with a CompactPCI® Classic P1 connector on hybrid backplane slots. For those applications the XP1 connector must not be stuffed on the EB3-TONE, and the total VBUS current via the USB connectors should not exceed ~3A. Please identify your particular system environment before ordering the EB3-TONE with or w/o XP1.
© EKF
-8-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter CompactPCI® Express Backplane Connectors The EB3-TONE is equipped with two connectors XJ3 and XJ4, which are mandatory for CompactPCI® Express type 2 and PXI Express™ peripheral slot cards, and the optional power connector XP1, which is specified for type 1 CompactPCI® Express peripheral slots. Please note, that XP1 must not be stuffed on the EB3-TONE for usage on PXI Express™ hybrid peripheral slots.
2
USB 3.0
3
USB 3.0
4
USB 3.0
CompactPCI® Express Type 2 Peripheral Board PXI Express Peripheral Module
XJ3
USB 3.0
XJ4
1
EB3-TONE
© EKF • ekf.com
XP1
Quad Port USB3 Controller
EB3-TONE • CompactPCI® Express - PXI Express • © EKF • ekf.com
© EKF
-9-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter XP1 Universal Power Module (UPM) Connector EKF Part #264.06.007.10
XP1
Power Rail
G
GND
F
+12V
E
+12V
D
GND
C
+5V
B
+3.3V
A
GND
pin positions printed grey are not connected XP1 will be provided as an option. This is recommended in order to have available the maximum total VBUS current supplied via the USB front panel connectors. However, XP1 may coincide with legacy type backplane connectors in a chosen PXI Express™ backplane slot. Please check your needs before ordering.
Universal Power Module Connector
G F
XP1 UPM
E D C B A 264.06.007.10 © EKF ekf.com
© EKF
-10-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter XJ3 Advanced Differential Fabric (ADF) Connector • EKF Part #250.2.0310.10.01 XJ3
A
B
C
D
E
F
RSV
RSV
RSV
RSV
RSV
RSV
PXIe_CLK100+
PXIe_CLK100-
PXIe_SYNC100+
PXIe_SYNC100-
PXIe_DSTARC+
PXIe_DSTARC-
2
RSV
RSV
RSV
RSV
PRSNT#
PWREN#
PCIe_DSTARB+
PCIe_DSTARB-
PCIe_DSTARA+
PCIe_DSTARA-
3
SMB_DAT
SMB_CLK
RSV
RSV
RSV
RSV
4
MPWRGD
PERST#
RSV
RSV
1REFCLK+
1REFCLK-
5
1PETP0
1PETN0
1PERP0
1PERN0
1PETP1
1PETN1
6
1PETP2
1PETN2
1PERP2
1PERN2
1PERP1
1PERN1
7
1PETP3
1PETN3
1PERP3
1PERN3
1PETP4
1PETN4
8
1PETP5
1PETN5
1PERP5
1PERN5
1PERP4
1PERN4
9
1PETP6
1PETN6
1PERP6
1PERN6
1PETP7
1PETN7
10
RSV
RSV
RSV
RSV
1PERP7
1PERN7
1
all signals printed grey are NC • all signal names printed italic are specified for PXI Express™ all differential pair shield pins ab(1-10), cd(1-10) and ef(1-10) are tied to GND f e
d c
b a
XJ2 / XJ3 ADF
Advanced Differential Fabric Connector
1
10 250.2.0310.10.01 © EKF ekf.com
© EKF
-11-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter XJ4 Enriched Hard-Metric (eHM) Connector • EKF Part #250.1.0508.10.02 XJ4
A
B
C
D
E
1
GA4
GA3
GA2
GA1
GA0
2
+5V_AUX
GND
SYSEN#
WAKE#
ALERT#
3
12V
12V
GND
GND
GND
4
GND
GND
3.3V
3.3V
3.3V
I/O
I/O
I/O
I/O
I/O
PXI_TRIG3
PXI_TRIG4
PXI_TRIG5
PXI_GND
PXI_TRIG6
I/O
I/O
I/O
I/O
PXI_STAR
PXI_CLK10
I/O
I/O
PXI_GND
PXI_TRIG7
5 6 7 8
ATNLED
PXI_TRIG2
PXI_GND
I/O
I/O ATNSW#
PXI_TRIG1
PXI_TRIG0
I/O
I/O
I/O
I/O
I/O
PXI_RSV
PXI_GND
PXI_RSV
PXI_LBL6
PXI_LBR6
all signals printed grey are NC • all signal names printed italic are specified for PXI Express™
1
Enriched Hard-Metric Connector
XJ4 eHM
f e d c b a
8 250.1.0508.10.01 © EKF ekf.com
The XJ4 connector is mechanically coded either for pure usage with CompactPCI® Express (F1 key) or PXI Express™ (F2 key). By default, the F2 connector is populated, since it can be inserted into both types of backplane connectors XP4. Illustrated above is the F1 keyed connector.
© EKF
-12-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter
EB3-TONE in a Hybrid Backplane System
EB3-TONE Links EB3-TONE Home
www.ekf.com/e/eb3/eb3.html
Driver Software USB 3.0 TUSB7340 xHCI Driver
www.ti.com/product/tusb7340#toolssoftware
Ordering Information For popular EB3-TONE SKUs please refer to www.ekf.com/liste/liste_23.html#EB3
© EKF
-13-
ekf.com
EB3-TONE • CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 Hostadapter
Beyond All Limits: EKF High Performance Embedded
Industrial Computers Made in Germany
boards.
EKF Elektronik GmbH Philipp-Reis-Str. 4 (Haus 1) Lilienthalstr. 2 (Haus 2) 59065 HAMM Germany
systems.
solutions.
Phone +49 (0)2381/6890-0 Fax +49 (0)2381/6890-90 Internet www.ekf.com E-Mail
[email protected]
