Preview only show first 10 pages with watermark. For full document please download

`ec-tt3` 70mm Ear Cushion

   EMBED

Share

Transcript

BEST SELLE R 2016 Premium Plus Office/Contact Centre Telecom Headsets Element TT3 Modular Headset The Element TT3 is a premium plus office and contact centre modular telecom headset system suitable for high volume phone users. T E C H N I C A L TT3 BOOM D A T A Microphone: The Element TT3 is a unique patented 3 part modular telecom headset system that has been designed to provide the user with the choice of wearing styles on demand, as well as giving notable cost savings and a longer headset life. The Element TT3 gives you the option to switch from monaural headband to binaural headband with one simple click. TT3 MON Pattern: Electret Condenser Directional: Noise Cancelling Impedance: max. 2.2k Ohm Sensitivity: -49±3dB at 1 kHz Frequency range: 100 Hz - 10 kHz Operating Temp: -20°C to +60°C Storage Temp: -25°C to +70°C Speaker: Pattern: Electrodynamic – Single or dual ear - Unique user interchangeable headband from single to dual ear – Left / right ear side compatible – Wideband enabled speakers – Noise cancelling microphone – Ratchet style microphone boom arm Impedance: 32 Ohm ± 15% Sound pressure level: 126±3dB at 1mw & 1kHz Sound intensity level: Max. Power 300mw Frequency range: 100 Hz - 5 kHz Operating Temp: -25°C to +50°C Storage Temp: -25°C to +50°C – Leatherette ear cushions included – High comfort headband - additional padding/ support added to the top of the headband – Headset storage bag included TT3 BIN – Full range of bottom leads available – 24 Month repair or replacement warranty – Longer Life - Because of the modular design, if a speaker / microphone or headband breaks out of warranty, you only need to replace half of the headset (one part), which means a longer life for the headset and a cost saving because you do not need to replace the complete headset. – Cost of ownership reduced - why change the whole headset when changing half is the solution! Upgrade your JPL headset by adding the NEW ‘EC-TT3’ 70mm ear cushion EC-TT3 The ‘EC-TT3’ 70mm ear cushion fits simply onto our Element TT3 monaural and binaural headsets, surrounding your ear with the large cushion to allow you to concentrate on the call and not be distracted by conversations around you. Once you have removed the existing 50mm ear cushion, the ‘EC-TT3’ bracket simply clips onto the speaker holder and then the 70mm smooth leatherette ear cushion slips neatly over the bracket. E&OE - 03.17 PLANTRONICS COMPATIBLE QD CLOTHING CLIP HEADSET BAG & HANGING HOOK