Transcript
VOLVO EXCAVATOR
EC160B LC EC160B NLC MONOBLOCK/2-PIECE BOOM
• Engine power, gross: 90 kW (121 hp) • Operating weight: LC: 16.6 ~ 18.4 t NLC: 16.5 ~ 18.3 t • Buckets (SAE) 775 ~ 1,225 l • Turbocharged VOLVO diesel engine with water cooling, direct injection and charged air cooler
• Contronics, Volvo’s advanced mode selection system and electronically controlled system • 2 variable displacement axial piston pumps. Independent and simultaneous movements of the digging equipment are controlled by "Automatic Sensing Work Mode". • Cab – Ergonomic environment for easier operator use – Low sound level – Filtered air – Hydraulic dampening mounts
• Strong digging equipment, produced by robotic welding • High lifting, breakout and tearout forces for tough digging conditions • Undercarriage _ LC: Longer undercarriage for excellent stability _ NLC: Narrow width for easier transportation • Auxiliary hydraulic valve is standard • Prepared for a number of optional items
ENGINE
SWING SYSTEM
Both the EC160B LC and EC160B NLC are powered by a turbocharged 4-stroke 6 cylinder diesel engine with water cooling, direct injection and a charged air cooler. This engine has been specifically designed for excavators giving you good fuel economy, low noise and emission levels, and a long service life.
The superstructure is swung by the means of an axial piston motor and a planetary reduction gear. Automatic swing holding brake and anti-rebound valve are standard. Max. swing speed . . . . . . . . . . . . . . . . . . . . . . . 11.9 rpm
Air Filter: 3-stage Automatic Idling System: Reduces engine speed to idle when the levers and pedals are not activated resulting in less fuel consumption and low cab noise levels. Low-Emission Engine: Make . . . . . . . . . . . . . . . . . . . . . Model . . . . . . . . . . . . . . . . . . . . Power output at . . . . . . . . . . . . Net (ISO 9249/ SAE J1349) . . . . . . . . . . Gross (SAE J1995) . . . . . . . . Max. torque . . . . . . . . . . . . . . . . No. of cylinders . . . . . . . . . . . . Displacement . . . . . . . . . . . . . . Bore . . . . . . . . . . . . . . . . . . . . . Stroke . . . . . . . . . . . . . . . . . . . .
VOLVO D6D 32 r/s (1,900 rpm) 81 kW (110 ps / 109 hp) 90 kW (122 ps / 121 hp) 542 N.m at 1,450 rpm 6 5.7 l 98 mm 126 mm
ELECTRICAL SYSTEM High capacity electrical system that is well-protected. Waterproof double-lock harness plugs are used to secure corrosion free connections. The main relays and solenoid valves are shielded to prevent damage. The master switch is standard. Contronics, provides advanced monitoring of machine functions and important diagnostic information. Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery capacity . . . . . . . . . . . . . . . . . . . . . . Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24 V 2 x 12 V 150 Ah 28 V / 80 A
SERVICE REFILL CAPACITIES Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 l Hydraulic system, total . . . . . . . . . . . . . . . . . . . . . . 245 l Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 l Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 l Engine coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 l Swing reduction unit . . . . . . . . . . . . . . . . . . . . . . . . . 2.6 l Travel reduction unit . . . . . . . . . . . . . . . . . . . . . . 2 x 5.8 l
DRIVE Each track is powered by an automatic two-speed shift travel motor. The track brakes are multi-disc, spring-applied and hydraulic released. The travel motor, brake and planetary gears are well protected within the track frame. Max. tractive effort . . . . . . . . . . . . . . . 145 kN (14,790 kg) Max. travel speed . . . . . . . . . . . . . . . . 3.0 / 5.6 km/h Gradeability . . . . . . . . . . . . . . . . . . . . 35o (70%)
UNDERCARRIAGE The undercarriage has a robust X-shaped frame, greased and sealed track chains are standard. No. of track pads . . . . . . . . . . 2 x 44 Link pitch . . . . . . . . . . . . . . . . 190 mm Shoe width, triple grouser . . . 500 / 600 / 700 / 800 mm No. of bottom rollers . . . . . . . . 2 x 7 No. of top rollers . . . . . . . . . . . 2 x 2
HYDRAULIC SYSTEM
CAB
The hydraulic system, also known as the “Automatic Sensing Work Mode”, is designed for high-productivity, high-digging capacity, high-maneuvering precision and good fuel economy. The summation system, boom, arm and swing priority along with boom and arm regeneration provide optimum performance.
The operator’s cab has easy access via a wide door opening. The cab is supported on hydraulic dampening mounts to reduce shock and vibration levels. These along with sound absorbing lining provide low noise levels. The cab has excellent all-round visibility. The front windshield can easily slide up into the ceiling and the lower front glass can be removed and stored in the side door.
The following important functions are included in the system: Summation system: Combines the flow of both hydraulic pumps to ensure quick cycle times and high productivity. Boom priority: Gives priority to the boom operation for faster raising when loading or performing deep excavations. Arm priority: Gives priority to the arm operation for faster cycle times in leveling and for increased bucket filling when digging. Swing priority: Gives priority to swing functions for faster simultaneous operations. Regeneration system: Prevents cavitation and provides flow to other movements during simultaneous operations for maximum productivity. Power boost: All digging and lifting forces are increased. Holding valves: Boom and arm holding valves prevent the digging equipment from creeping. Power Max: All function speeds are increased. Main pump: Type . . . . . . . . . . . 2 x variable displacement axial piston pumps Maximum flow . . . 2 x 145 l/min Pilot pump: Type . . . . . . . . . . . Gear pump Maximum flow . . . 1 x 19 l/min Hydraulic motors: Travel . . . . . . . . . . Variable displacement axial piston motor with mechanical brake Swing . . . . . . . . . . Fixed displacement axial piston motor with mechanical brake Relief valve setting: Implement . . . . . . . Travel circuit . . . . . Swing circuit . . . . Pilot circuit . . . . . .
32.4 / 34.3 Mpa (330 / 350 kg/cm2) 34.3 Mpa (350 kg/cm2) 26.5 Mpa (270 kg/cm2) 3.9 Mpa (40 kg/cm2)
Hydraulic cylinders: Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . Bore x Stroke . . . . . . . . . . . . . . . . . . . 1st boom of 2-piece boom . . . . . . . . . . Bore x Stroke . . . . . . . . . . . . . . . . . . . 2nd boom of 2-piece boom . . . . . . . . . . Bore x Stroke . . . . . . . . . . . . . . . . . . . Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bore x Stroke . . . . . . . . . . . . . . . . . . . Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . Bore x Stroke . . . . . . . . . . . . . . . . . . .
2 ø115 x 1,165 mm 2 ø115 x 1,165 mm 1 ø160 x 950 mm 1 ø120 x 1,345 mm 1 ø105 x 1,000 mm
Integrated air conditioning and heating system: The pressurized and filtered cab air is supplied by an automatically controlled fan. The air is distributed throughout the cab from 13 vents. Ergonomic operator’s seat: The adjustable seat and joystick console move independently to accommodate the operator. The seat has nine different adjustments plus a seat belt to for the operator’s comfort and safety. Sound Level: Sound level in cab according to ISO 6396 . . . . . . . . . . . . . LpA 72 dB(A) External sound level according to ISO 6395 and EU Directive 2000/14/EC . . . . . . . LwA 101 dB(A)
GROUND PRESSURE LC undercarriage with 5.2 m monoblock boom, 2.6 m arm, 570 l (470 kg) bucket and 2,850 kg counterweight. Description
Triple grouser
Shoe width
Operating weight
Ground pressure
500 mm
16,580 kg
47.0 kPa (0.48 kg/cm2)
Overall width 2
2,700 mm
600 mm
16,800 kg
39.7 kPa (0.40 kg/cm )
2,800 mm
700 mm
17,010 kg
34.4 kPa (0.35 kg/cm2)
2,900 mm
800 mm
17,230 kg
2
30.5 kPa (0.31 kg/cm )
3,000 mm
LC undercarriage dozer blade with 5.2 m monoblock boom, 2.6 m arm, 570 l (470 kg) bucket and 2,850 kg counterweight. Description
Triple grouser
Shoe width
Operating weight
Ground pressure
Overall width 2
500 mm
17,710 kg
50.2 kPa (0.51 kg/cm )
2,800 mm
600 mm
17,930 kg
42.4 kPa (0.43 kg/cm2)
2,800 mm
2
700 mm
18,140 kg
36.7 kPa (0.37 kg/cm )
2,900 mm
800 mm
18,360 kg
32.5 kPa (0.33 kg/cm2)
3,000 mm
NLC undercarriage with 5.2 m monoblock boom, 2.6 m arm, 570 l (470 kg) bucket and 2,850 kg counterweight. Description
Shoe width 500 mm
Triple grouser
Operating weight 16,480 kg
Ground pressure
Overall width 2
2,490 mm
2
46.7 kPa (0.48 kg/cm )
600 mm
16,700 kg
39.5 kPa (0.40 kg/cm )
2,590 mm
700 mm
16,910 kg
34.2 kPa (0.35 kg/cm2)
2,690 mm
800 mm
17,130 kg
2
30.4 kPa (0.31 kg/cm )
2,790 mm
NLC undercarriage dozer blade with 5.2 m monoblock boom, 2.6 m arm, 570 l (470 kg) bucket and 2,850 kg counterweight. Description
Triple grouser
Shoe width
Operating weight
Ground pressure
500 mm
17,610 kg
49.9 kPa (0.51 kg/cm2)
Overall width 2
2,590 mm
600 mm
17,830 kg
42.1 kPa (0.43 kg/cm )
2,590 mm
700 mm
18,040 kg
36.5 kPa (0.37 kg/cm2)
2,690 mm
800 mm
18,260 kg
2
32.4 kPa (0.33 kg/cm )
2,790 mm
MAX. PERMITTED BUCKETS Note: 1. Bucket size based on ISO 7451, heaped material with a 1:1 angle of repose. 2. “Max permitted sizes” are for reference only and are not necessarily available from the factory.
Max. permitted sizes for direct fit buckets: LC undercarriage with counterweight 2,850 kg 5.2 m Boom Description
Unit
2.3 m Arm
2.6 m Arm
3.0 m Arm
3
l
1,225
1,150
1,050
3
l
1,050
1,000
925
GP bucket 1,5 t/m GP bucket 1,8 t/m
Max. permitted sizes for S6 quick fit buckets: LC undercarriage with counterweight 2,850 kg 5.2 m Boom Description
Unit 3 3
GP bucket 1,5 t/m GP bucket 1,8 t/m
2.3 m Arm
2.6 m Arm
3.0 m Arm
l
1,175
1,100
1,025
l
1,025
950
875
Max. permitted sizes for S1 quick fit buckets: LC undercarriage with counterweight 2,850 kg 5.2 m Boom Description
Unit 3
GP bucket 1,5 t/m
GP bucket 1,8 t/m3
2.3 m Arm
2.6 m Arm
3.0 m Arm
l
1,150
1,075
1,000
l
1,000
950
875
Max. permitted sizes for direct fit buckets: NLC undercarriage with counterweight 2,850 kg 5.2 m Boom Description
Unit
2.3 m Arm
2.6 m Arm
GP bucket 1,5 t/m3
l
1,075
1,025
925
3
l
950
850
775
GP bucket 1,8 t/m
3.0 m Arm
Max. permitted sizes for S6 quick fit buckets: NLC undercarriage with counterweight 2,850 kg 5.2 m Boom Description
Unit
2.3 m Arm
2.6 m Arm
3.0 m Arm
GP bucket 1,5 t/m3
l
1,050
975
900
3
l
1,025
875
825
GP bucket 1,8 t/m
Max. permitted sizes for S1 quick fit buckets: NLC undercarriage with counterweight 2,850 kg 5.2 m Boom Description
Unit
2.3 m Arm
2.6 m Arm
3.0 m Arm
3
l
1,025
875
825
3
l
950
825
775
GP bucket 1,5 t/m GP bucket 1,8 t/m
BUCKET & ARM COMBINATION LC undercarriage, Volvo HARDOX 400 R bucket (curved side) Description Bucket capacity
Direct fit - GP bucket SAE
530 l
630 l
690 l
820 l
CECE
480 l
570 l
620 l
730 l
Bucket width
800 mm
900 mm
1,000 mm
1,200 mm
Weight (with side cutter)
440 kg
470 kg
500 kg
545 kg
No. of teeth
4
4
5
5
Application
General purpose
General purpose
General purpose
General purpose
2.3 m
A
A
A
A
2.6 m
A
A
A
B
3.0 m
A
A
A
C
2,850 kg counterweight
Monoblock boom 5.2 m + arm options
LC undercarriage, Volvo HARDOX 400 R bucket (curved side) Description Bucket capacity
S6 Quick fit - GP bucket
S1 Quick fit - GP bucket
SAE
630 l
690 l
630 l
CECE
570 l
620 l
570 l
Bucket width
900 mm
1,000 mm
850 mm
Weight (with side cutter)
430 kg
460 kg
480 kg
No. of teeth
4
5
4
Application
General purpose
General purpose
General purpose
2.3 m
A
A
A
2.6 m
A
A
A
A
A
A
2,850 kg counterweight
Monoblock boom 5.2 m + arm options
3.0 m 3
A: Applicable for general purpose up to 2,000 kg/m B: Applicable for general purpose up to 1,800 kg/m3 C: Applicable for general purpose up to 1,500 kg/m3
BUCKET & ARM COMBINATION NLC undercarriage, Volvo HARDOX 400 R bucket (curved side) Description Bucket capacity
Direct fit - GP bucket SAE
530 l
630 l
690 l
820 l
CECE
480 l
570 l
620 l
730 l
Bucket width
800 mm
900 mm
1,000 mm
1,200 mm
Weight (with side cutter)
440 kg
470 kg
500 kg
545 kg
No. of teeth
4
4
5
5
Application
General purpose
General purpose
General purpose
General purpose
2.3 m
A
A
A
B
2.6 m
A
A
A
C
3.0 m
A
A
A
C
2,850 kg counterweight
Monoblock boom 5.2 m + arm options
NLC undercarriage, Volvo HARDOX 400 R bucket (curved side) Description Bucket capacity
S6 Quick fit - GP bucket
S1 Quick fit - GP bucket
SAE
630 l
690 l
630 l
CECE
570 l
620 l
570 l
Bucket width
900 mm
1,000 mm
850 mm
Weight (with side cutter)
430 kg
460 kg
480 kg
No. of teeth
4
5
4
Application
General purpose
General purpose
General purpose
2.3 m
A
A
A
2.6 m
A
B
A
B
B
B
2,850 kg counterweight
Monoblock boom 5.2 m + arm options
3.0 m 3
A: Applicable for general purpose up to 2,000 kg/m B: Applicable for general purpose up to 1,800 kg/m3 C: Applicable for general purpose up to 1,500 kg/m3
DIMENSIONS L
A D
C M E
F K J G
I
H
B
L'
M'
LC 5.2 m Boom Description
Unit
A. Overall width of superstructure
2.3 m Arm
2.6 m Arm
mm
2,450
2,450
2,450
B. Overall width
mm
2,800
2,800
2,800
C. Overall height of cab
mm
2,900
2,900
2,900
D. Tail swing radius
mm
2,450
2,450
2,450
E. Overall height of engine hood
mm
2,190
2,190
2,190
F. Counterweight clearance *
mm
1,010
1,010
1,010
G. Tumbler length
mm
3,180
3,180
3,180
H. Track length
mm
3,980
3,980
3,980
I. Track gauge
mm
2,200
2,200
2,200
J. Shoe width
mm
600
600
600
K. Min. ground clearance *
mm
460
460
460
L. Overall length
mm
8,780
8,670
8,710
L'. Overall length
mm
8,600
8,520
8,520
M. Overall height of boom
mm
2,980
2,900
3,020
M'. Overall height of boom
mm
2,770
2,770
2,930
* Without shoe grouser
3.0 m Arm
DIMENSIONS NLC 5.2 m Boom Description
Unit
A. Overall width of superstructure
2.3 m Arm
2.6 m Arm
3.0 m Arm
mm
2,450
2,450
2,450
B. Overall width
mm
2,590
2,590
2,590
C. Overall height of cab
mm
2,900
2,900
2,900
D. Tail swing radius
mm
2,450
2,450
2,450
E. Overall height of engine hood
mm
2,190
2,190
2,190
F. Counterweight clearance *
mm
1,010
1,010
1,010
G. Tumbler length
mm
3,180
3,180
3,180
H. Track length
mm
3,980
3,980
3,980
I. Track gauge
mm
1,990
1,990
1,990
J. Shoe width
mm
600
600
600
K. Min. ground clearance *
mm
460
460
460
L. Overall length
mm
8,780
8,670
8,710
L'. Overall length
mm
8,600
8,520
8,520
M. Overall height of boom
mm
2,980
2,900
3,020
M'.Overall height of boom
mm
2,770
2,770
2,930
* Without shoe grouser
Boom Height
Description
5.2 m
5.0 m 2-piece
Length
5,400 mm
5,200 mm
Height
1,640 mm
1,270 mm
Width
565 mm
565 mm
Weight
Length
1,350 kg
1,600 kg
* Includes cylinder, pin and piping
Arm Height
Length
Description
2.3 m
2.6 m
3.0 m
Length
3,240 mm
3,500 mm
3,900 mm
Height
855 mm
855 mm
845 mm
Width
395 mm
395 mm
395 mm
Weight
760 kg
775 kg
840 kg
* Includes cylinder, piping and linkage
Front dozer blade Description
A
B
C
Measurement LC
NLC
A. Height
516 mm
516 mm
Width
2,800 mm
2,590 mm
Weight
600 kg
575 kg
B. Lift height
710 mm
710 mm
C. Digging depth
607 mm
607 mm
WORKING RANGES & DIGGING FORCES A B H
(m) 9
8
7
6
5
F 4
G
3
2
1
-1
-2
C D E
-3
-4
-5
-6
9
8
7
6
5
4
3
2
1
0
(m)
2,440 mm
5.2 m monoblock boom with direct fit GP bucket 5.2 m Boom Description
Unit
A. Max. digging reach
2.3 m Arm
2.6 m Arm
3.0 m Arm
mm
8,650
8,970
9,340
B. Max. digging reach on ground
mm
8,490
8,810
9,180
C. Max. digging depth
mm
5,740
6,040
6,440
D. Max. digging depth (2.44 m level)
mm
5,430
5,770
6,200
E. Max. vertical wall digging depth
mm
4,070
4,540
4,960
F. Max. cutting height
mm
8,530
8,790
9,000
G. Max. dumping height
mm
6,110
6,340
6,540
H. Min. front swing radius
mm
3,070
3,070
3,070
Digging forces with direct fit bucket 5.2 m Boom Description
Unit
Bucket radius Breakout force _ bucket (Normal / Power boost) SAE Breakout force _ bucket (Normal / Power boost) ISO Tearout force _ arm (Normal / Power boost) Tearout force _ arm (Normal / Power boost) Rotation angle, bucket
2.3 m Arm
2.6 m Arm
3.0 m Arm
mm
1,315
1,315
1,315
kN
99.2 / 105.2
99.2 / 105.2
99.2 / 105.2
kN
111.3 / 118.1
111.3 / 118.1
111.3 / 118.1
SAE
kN
84.9 / 90.1
75.5 / 80.0
68.4 / 72.6
ISO
kN
87.3 / 92.6
77.4 / 82.1
69.9 / 74.1
deg
174
174
174
WORKING RANGES & DIGGING FORCES A B H
(m) 11
10
9
8
7
6
F
5
4
G 3
2
1
-1
-2
C D E
-3
-4
-5
-6
9
8
7
6
5
4
3
2
1
0
(m)
2,440 mm
5.0 m 2-piece boom with direct fit bucket 5.0 m 2-piece boom Description
Unit
A. Max. digging reach
2.3 m Arm
2.6 m Arm
3.0 m Arm
mm
8,550
8,870
9,240
B. Max. digging reach on ground
mm
8,380
8,700
9,090
C. Max. digging depth
mm
5,210
5,530
5,930
D. Max. digging depth (2.44 m level)
mm
5,090
5,410
5,810
E. Max. vertical wall digging depth
mm
4,070
4,430
4,830
F. Max. cutting height
mm
9,510
9,820
10,120
G. Max. dumping height
mm
6,920
7,210
7,520
H. Min. front swing radius
mm
2,290
2,250
2,350
Digging forces with direct fit bucket 5.2 m Boom Description
Unit
Bucket radius Breakout force _ bucket (Normal / Power boost) SAE Breakout force _ bucket (Normal / Power boost) ISO Tearout force _ arm (Normal / Power boost) Tearout force _ arm (Normal / Power boost) Rotation angle, bucket
2.3 m Arm
2.6 m Arm
3.0 m Arm
mm
1,315
1,315
1,315
kN
99.2 / 105.2
99.2 / 105.2
99.2 / 105.2
kN
111.3 / 118.1
111.3 / 118.1
111.3 / 118.1
SAE
kN
84.9 / 90.1
75.5 / 80.0
68.4 / 72.6
ISO
kN
87.3 / 92.6
77.4 / 82.1
69.9 / 74.1
deg
174
174
174
LIFTING CAPACITY (At the arm and without bucket) Note: For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick fit from the following values.
EC160B LC Across undercarriage Along undercarriage
Lifting hook related to ground level
1.5 m
3.0 m
4.5 m
6.0 m
7.5 m
Max. reach Max. mm
6.0 m kg
*4,210
3,680
5,880
4.5 m kg
*4,670 *4,670 *4,380
3,500
4,110
2,890
6,760
3.0 m kg
*6,170
5,130
4,830
3,360
3,640
2,540
7,220
1.5 m kg
7,240
4,800
4,680
3,210
3,470
2,410
7,340
0 m kg
7,030
4,610
4,560
3,100
3,560
2,450
7,140
4,520
3,070
3,970
2,710
6,590
5,080
3,440
5,590
with 600 mm shoe 2,850 kg CWT monoblock boom 5.2 m + arm 2.3 m -1.5 m kg
*9,840
8,660
6,980
4,570
-3.0 m kg
*12,170
8,810
7,050
4,640
-4.5 m kg 6.0 m kg
*3,900
3,600
*3,830
3,340
6,270
4.5 m kg
*4,300 *4,300 *4,120
3,540
*3,760
2,690
7,100
3.0 m kg
*9,120 *9,120 *5,810
5,200 *4,770
3,390
3,440
2,400
3,410
2,380
7,540
1.5 m kg
7,280
4,840
4,690
3,230
3,370
2,340
3,270
2,270
7,650
*5,100 *5,100
7,040
4,620
4,560
3,110
3,340
2,300
7,460
4,500
3,050
3,670
2,520
6,940
4,560
3,100
6,000
*6,960
5,040
4,350
with 600 mm shoe 2,850 kg CWT monoblock boom
0 m kg
5.2 m + arm 2.6 m -1.5 m kg
*5,250 *5,250
*9,000
8,600
6,960
4,550
-3.0 m kg
*9,380 *9,380 *12,590
8,740
7,010
4,600
-4.5 m kg
*10,100
9,040
6.0 m kg
*3,450 *3,450
*3,240
3,000
6,720
4.5 m kg
*3,750
3,560
*3,180
2,460
7,500
3.0 m kg
*7,710 *7,710 *5,270
5,260 *4,430
3,400
3,440
2,400
3,160
2,200
7,910
1.5 m kg
*5,140 *5,140 *6,970
4,870
4,700
3,230
3,360
2,320
3,030
2,090
8,020
*5,570 *5,570
7,030
4,610
4,540
3,080
3,280
2,250
3,080
2,110
7,840
*8,430 *8,430
6,910
4,500
4,460
3,010
3,350
2,290
7,350
4,470
3,020
4,030
2,740
6,470
6,060
4,050
4,990
with 600 mm shoe 2,850 kg CWT monoblock boom
0 m kg
5.2 m + arm 3.0 m -1.5 m kg
*4,800 *4,800
-3.0 m kg
*8,160 *8,160 *13,000
8,590
6,930
4,520
-4.5 m kg
*11,010
8,850
7,100
4,670
Notes: 1. Machine in “Fine Mode-F” (Power Boost), for lifting capacities. 2. The above loads are in compliance with SAE J1097 and ISO 10567 Hydraulic Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
LIFTING CAPACITY (At the arm and without bucket) Note: For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick fit from the following values.
EC160B LC Across undercarriage Along undercarriage
Lifting hook related to ground level
1.5 m
3.0 m
4.5 m
6.0 m
7.5 m
Max. reach Max. mm
7.5 m kg
*5,560 *5,560
4,120
*4,800
3,760
5,740
6.0 m kg
*6,450
5,680
4.5 m kg
*7,860 *7,860 *6,990
5,480
4,970
3,450
4,190
2,910
6,640
2,850 kg CWT
3.0 m kg
7,630
5,100
4,820
3,310
3,690
2,540
7,110
2-piece boom
1.5 m kg
7,220
4,740
4,650
3,160
3,520
2,410
7,230
0 m kg
6,990
4,540
4,530
3,050
3,620
2,460
7,030
6,950
4,510
4,510
3,030
4,060
2,750
6,470
-3.0 m kg
*5,350
4,610
*4,090
3,610
5,380
7.5 m kg
*4,790 *4,790
*4,350 *4,350
4,670
6.0 m kg
*5,550 *5,550 *4,290
3,540
*3,790
3,390
6,140
with 600 mm shoe
5.0 m + arm 2.3 m
-1.5 m kg
4.5 m kg
*10,050
8,550
*5,870 *5,870 *6,360
5,550
5,020
3,500
*3,650
2,700
6,980
7,710
5,170
4,850
3,350
3,450
2,380
7,430
7,270
4,790
4,670
3,170
3,300
2,260
7,550
*5,630 *5,630
7,010
4,550
4,530
3,050
3,380
2,300
7,355
*9,670
6,930
4,490
4,490
3,010
3,750
2,540
6,830
-3.0 m kg
*5,940
4,560
*3,950
3,190
5,860
7.5 m kg
*4,650 *4,650
*3,600 *3,600
5,270
6.0 m kg
*4,680 *4,680 *4,340
3,600
*3,200
3,030
6,600
4.5 m kg
*5,140 *5,140
5,060
3,530
*3,080
2,460
7,390
5,250
4,880
3,370
3,410
2,350 *3,130
2,190
7,810
with 600 mm shoe 2,850 kg CWT
3.0 m kg
2-piece boom
1.5 m kg
*11,810
9,780
3,340
2,280
5.0 m + arm 2.6 m 0 m kg -1.5 m kg
8,490
with 600 mm shoe 2,850 kg CWT
3.0 m kg
*10,820 10,110 *7,350
2-piece boom
1.5 m kg
*6,320 *6,320
7,330
4,830
4,680
3,180
3,330
2,270
3,050
2,080
7,930
0 m kg
*6,050 *6,050
7,000
4,540
4,510
3,030
3,260
2,210
3,110
2,110
7,740
-1.5 m kg
*9,010
8,370
6,880
4,430
4,440
2,960
3,410
2,300
7,240
-3.0 m kg
*8,880
8,520 *6,560
4,470
4,480
3,000
*3,940
2,800
6,350
5.0 m + arm 3.0 m
Notes: 1. Machine in “Fine Mode-F” (Power Boost), for lifting capacities. 2. The above loads are in compliance with SAE J1097 and ISO 10567 Hydraulic Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
LIFTING CAPACITY (At the arm and without bucket) Note: For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick fit from the following values.
EC160B NLC Across undercarriage Along undercarriage
Lifting hook related to ground level
1.5 m
3.0 m
4.5 m
6.0 m
7.5 m
Max. reach Max. mm
6.0 m kg
*4,210
3,310
5,880
4.5 m kg
*4,670 *4,670 *4,380
3,150
4,120
2,590
6,760
3.0 m kg
*6,170
4,570
4,850
3,010
3,640
2,270
7,220
1.5 m kg
7,240
4,240
4,680
2,860
3,480
2,140
7,340
0 m kg
7,030
4,060
4,560
2,750
3,560
2,180
7,140
4,530
2,720
3,970
2,410
6,590
5,090
3,050
5,590
with 600 mm shoe 2,850 kg CWT monoblock boom 5.2 m + arm 2.3 m -1.5 m kg
*9,840
7,460
6,980
4,020
-3.0 m kg
*12,170
7,600
7,060
4,090
-4.5 m kg 6.0 m kg
*3,900
3,240
*3,830
3,010
6,270
4.5 m kg
*4,300 *4,300 *4,120
3,180
*3,760
2,410
7,100
3.0 m kg
*9,120
8,450 *5,810
4,630 *4,770
3,030
3,440
2,150
3,420
2,130
7,540
7,290
4,280
4,700
2,870
3,370
2,080
3,270
2,020
7,650
*5,100 *5,100
7,050
4,070
4,570
2,760
3,340
2,040
7,460
4,510
2,710
3,680
2,240
6,940
4,560
2,750
6,000
*6,960
4,450
4,350
with 600 mm shoe 2,850 kg CWT monoblock boom
1.5 m kg 0 m kg
5.2 m + arm 2.6 m -1.5 m kg
*5,250 *5,250
*9,000
7,410
6,970
4,010
-3.0 m kg
*9,380 *9,380 *12,590
7,530
7,020
4,050
-4.5 m kg
*10,100
7,820
6.0 m kg
*3,450
3,280
*3,240
2,700
6,720
4.5 m kg
*3,750
3,200
*3,180
2,200
7,500
3.0 m kg
*7,710 *7,710 *5,270
4,690 *4,430
3,050
3,450
2,140
3,160
1,960
7,910
1.5 m kg
*5,140 *5,140 *6,970
4,310
4,700
2,870
3,360
2,060
3,030
1,860
8,020
*5,570 *5,570
7,040
4,060
4,550
2,730
3,290
2,000
3,080
1,870
7,840
with 600 mm shoe 2,850 kg CWT monoblock boom
0 m kg
5.2 m + arm 3.0 m -1.5 m kg
*4,800 *4,800
*8,430
7,300
6,920
3,960
4,470
2,660
3,350
2,030
7,350
-3.0 m kg
*8,160 *8,160 *13,000
7,390
6,930
3,970
4,480
2,670
4,040
2,430
6,470
-4.5 m kg
*11,010
7,640
7,100
4,110
6,060
3,580
4,990
Notes: 1. Machine in “Fine Mode-F” (Power Boost), for lifting capacities. 2. The above loads are in compliance with SAE J1097 and ISO 10567 Hydraulic Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
LIFTING CAPACITY (At the arm and without bucket) Note: For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick fit from the following values.
EC160B NLC Across undercarriage Along undercarriage
Lifting hook related to ground level
1.5 m
3.0 m
4.5 m
6.0 m
7.5 m
Max. reach Max. mm
7.5 m kg
*5,560 *5,560
4,120
*4,800
3,360
5,740
6.0 m kg
*6,450
5,090
4.5 m kg
*7,860 *7,860 *6,990
4,890
4,980
3,090
4,200
2,600
6,640
2,850 kg CWT
3.0 m kg
7,640
4,530
4,820
2,950
3,690
2,260
7,110
2-piece boom
1.5 m kg
7,230
4,170
4,650
2,800
3,520
2,130
7,230
0 m kg
7,000
3,980
4,530
2,690
3,620
2,170
7,030
6,960
3,950
4,510
2,670
4,070
2,430
6,470
-3.0 m kg
*5,350
4,050
*4,090
3,190
5,380
7.5 m kg
*4,790 *4,790
*4,350 *4,350
4,670
6.0 m kg
*5,550
4.5 m kg
*5,870 *5,870 *6,360
with 600 mm shoe
5.0 m + arm 2.3 m
-1.5 m kg
*10,050
7,340
5,160 *4,290
3,170
*3,790
3,040
6,140
4,960
5,020
3,130
*3,650
2,410
6,980
7,720
4,600
4,860
2,980
3,460
2,110
7,430
7,280
4,220
4,670
2,820
3,310
2,000
7,550
*5,630 *5,630
7,010
3,990
4,540
2,690
3,390
2,040
7,355
*9,670
6,940
3,930
4,490
2,650
3,760
2,250
6,830
-3.0 m kg
*5,940
4,000
*3,950
2,820
5,860
7.5 m kg
*4,650 *4,650
*3,600 *3,600
5,270
6.0 m kg
*4,680 *4,680 *4,340
3,230
*3,200
2,710
6,600
4.5 m kg
*5,140
5,040
5,070
3,160
*3,080
2,190
7,390
8,800 *7,350
4,670
4,890
3,000
3,420
2,090 *3,130
1,940
7,810
with 600 mm shoe 2,850 kg CWT
3.0 m kg
2-piece boom
1.5 m kg
*11,870
8,500
3,340
2,020
5.0 m + arm 2.6 m 0 m kg -1.5 m kg
7,280
with 600 mm shoe 2,850 kg CWT
3.0 m kg
*10,820
2-piece boom
1.5 m kg
*6,320 *6,320
7,330
4,260
4,680
2,820
3,330
2,010
3,060
1,840
7,930
0 m kg
*6,050 *6,050
7,010
3,980
4,520
2,670
3,260
1,950
3,120
1,860
7,740
-1.5 m kg
*9,010
7,160
6,880
3,880
4,440
2,600
3,410
2,030
7,240
-3.0 m kg
*8,880
7,300 *6,560
3,910
4,490
2,640
*3,940
2,470
6,350
5.0 m + arm 3.0 m
Notes: 1. Machine in “Fine Mode-F” (Power Boost), for lifting capacities. 2. The above loads are in compliance with SAE J1097 and ISO 10567 Hydraulic Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
STANDARD EQUIPMENT Engine Turbocharged, 4 stroke 6 cylinder diesel engine with water cooling, direct injection and charged air cooler 3-stage air filter with indicator Air intake heater Electric engine shut-off Fuel filter and water separator Coolant filter Tropical cooling kit Alternator, 80 A
Electric / Electronic control system Contronics: – Advanced mode control system – Self-diagnostic system Machine status indication Engine speed sensing power control “Power Max” mode system Automatic idling system One-touch power boost Safety stop/start function Adjustable monitor
Travel alarm Battery master switch Engine restart prevention circuit High capacity halogen lights: – Frame mounted 2 – Boom mounted 2 Batteries, 2 x 12 V/150 Ah Start motor, 24 V/4.8 kW
Hydraulic system Automatic hydraulic system: – Summation system – Boom priority – Arm priority – Swing priority Boom and arm regeneration valves Swing anti-rebound valves Boom and arm holding valves Multi-stage filtering system Cylinder cushions Cylinder contamination seals Auxiliary hydraulic valve Straight travel circuit Automatic two-speed travel motors Hydraulic oil, ISO VG 68
Superstructure Access way with handrail Tool storage area Punched metal anti-slip plates Undercover (4.5 mm) Counterweight, 2,850 kg
Cab and interior Heater & air-conditioner, automatic Hydraulic dampening cab mounts Adjustable operator seat and joystick control console Flexible antenna Hydraulic safety lock lever Pilot-operated wrist control joysticks – Semi-long joysticks Cab, all-weather sound suppressed, includes: – Ashtray – Cup holder – Lighter – Tinted glass – Door locks – Floor mat – Horn
– Large storage area – Pull-up type front window – Removable lower windshield – Seat belt – Safety glass – Windshield wiper with intermittent feature – Sun shield, front, roof, rear – Stereo cassette radio Anti-vandalism kit assembly preparation Master ignition key
Undercarriage Hydraulic track adjusters Greased and sealed track chain Track guards Undercover (4.5 mm)
Service Tool kit, full scale Spare parts
ALTERNATIVE EQUIPMENT Engine
Cab and interior
Track shoes
Digging equipment
Block heater, 120 V / 240 V Fuel filler pump: 35 l/min, 50 l/min with automatic shut-off
Seat: – Fabric seat – Fabric seat, with heater – Fabric seat, with heater and air suspension
500 / 600 / 700 / 800 mm track shoes with triple grousers
Boom: 5.2 m monoblock 5,0 m 2-piece Arm: 2.3 / 2.6 / 3.0 m
OPTIONAL EQUIPMENT (Standard in certain markets) Engine Diesel coolant heater
Electric Extra lamps: – Cab-mounted 3, (front 2, rear 1) – Counterweight-mounted 1 Overload warning device Rotating warning beacon Travel alarm
Hydraulic system Hose rupture valve: boom, arm Hydraulic piping – Hammer & shears: 1 pump flow 2 pump flow
Pump flow control for hammer & shears Additional return filter Extra piping for slope & rotator 1 switch control 2 switch control Pedal control – Grapple – Oil leak (drain) line – Quick fit piping Volvo hydraulic quick-fit, S1, S6 size Hydraulic oil, ISO VG 32 Hydraulic oil, ISO VG 46 Hydraulic oil, biodegradable 32 Hydraulic oil, biodegradable 46 Boom floating function
Cab and interior
Digging equipment
Air-conditioner, manual Falling object guard (FOG) Cab mounted falling object protective structures (FOPS) Rain shield, front Sunlight protection, roof (steel) Control joystick, with 3 switches each Control joystick, with 5 switches each Safety screen for front window Lower wiper Anti-vandalism kit Specific key
Long last bushing
Superstructure Undercover (2.3 mm)
Undercarriage Undercover (heavy duty 10 mm) Front dozer blade
Service Hand lamp Tool kit, daily maintenance
All products are not available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and designs without prior notice. The illustrations do not necessarily show the standard version of the machine.
Construction Equipment www.volvo.com
Ref. No. 30 D 100 0548 Printed in Sweden 2005.12-1,0 Volvo, Eskilstuna
English EXB
