Ecco Products

Transcript

ECCO PRODUCTS Finishing Equipment & Accessories ECCO FINISHING PRODUCTS AND SPARE PARTS MORE QUALITY PRODUCTION TIME The main focus of ECCO Finishing AB is to reduce production costs for its customers, while maintaining high quality results. Thus ECCO Finishing provides products that ensure “More Quality Production Time” to our end users. We offer world class finishing products to answer to the most demanding applications. HOW? Our products are built for productivity and are made of high quality materials. Therefore, we have proven that we can help provide: • Better transfer efficiency with our spray guns • Great atomizing quality • More reliability of our products due to their special design • Reduced down time in production • Reduced maintenance costs • Fast pay back • Ensure technical support in case you need it CASE STORIES Our case stories will prove you that we have achieved the above improvements at customers. Ask us for case story relevant for your market. QUALITY More than ever production people are focusing on optimizing output. This means improving first time quality of finished goods, reduce production costs and reducing down time of production lines. What is more irritating than a break down in production due to a failing part in the system? Thus we at ECCO Finishing focus on providing the best quality products to respond to the concerns of the demanding industrial finishing process. We choose the best quality materials and ensure authentic Swedish quality. ENVIRONMENT ECCO Finishing is dedicated to help its customers to reduce overspray and VOC impact on the environment. Our product development focus on high quality as well as sustainable products, causing smallest possible environmental impact, both when being manufactured and when running in production. ECCO Finishing is certified according to the environmental standards ISO-14001. INDEX About Ecco Finishing SPRAY GUNS: Low pressure guns: Airless/ Air assisted guns: Electrostatic guns: FLUID HANDLING / PUMPS: Low pressure pumps: High pressure pumps: 2 componens fluid handling: PAINTER’S PROTECTION: –2– Low Pressure Spraying Methods Low pressure spray guns - automatic Low pressure spray guns - manual Air cap guide Acessories & spares for low pressure spray guns Hoses for low pressure spray guns Low pressure Spray Packs Airless spraying methods Airless spray guns - automatic Airless spray guns - manual Spray tips for airless guns Spray tips for air assisted guns Airless Spare Parts Hoses for airless spray guns High pressure Spray Packs Electrostatic low pressure gun Electrostatic high pressure gun Pumps and fluid handling systems Paint supply units (PSU) Low pressure diaphragm pump Low pressure piston pumps Pressure feed tanks Paint pressure regulator & colour changing system, heater Stirrers High pressure Power Flow Pumps Acessories for high pressure pumps 2K Fluid handling systems Personal safety 2 3 4-7 8-11 12 13-14 15 16-17 18 19-20 21-22 23-24 25 26 27 28-29 30-31 32-33 34 35 36 37-38 39 40 41 42-44 45 46 47 ECCO FINISHING PRODUCTS AND SPARE PARTS ECCO LOW PRESSURE PAINT SPRAYING - HIGH EFFICIENCY TECHNOLOGY Our concern is to offer you the best finishing technology for your demand. Therefore we offer three different application methods for different materials and different demands: • Conventional spraying • High Efficiency • HVLP Conventional spray painting is using high velocity air jets at high pressure to create high atomization. This is suitable for painting where the result must have the best appearance quality. By using the conventional method you will reach high gloss and the best result in color and DOI (Distinction of Image). However the paint consumption is higher. Operating pressure is around 2 to 4 bars (30 to 60 psi). HVLP (High Volume Low Pressure) uses more air at lower velocity to atomize the paint, compared to the conventional paint spraying. The lower air pressure creates larger paint particles, which will give you a lower finish quality. However, it creates less overspray that increases the transfer efficiency. HVLP operates at 0,7 bar (10 psi) at the air cap in order to bring 65% transfer efficiency. High Efficiency is a combination of both of the above methods, and thus it offers you both a high quality of finish and high transfer efficiency. Here the air cap pressure is between 1,3 and 3 bars (20 to 45 psi) and we exceed 65% transfer efficiency. This is a great combination and offers best advantages of both of the above technologies. Each method has its justification and will also depend on the material you want to apply. ADVANTAGES • First class finish • Paint savings and low overspray • Uniformed coat thickness • Simple and easy adjustment of fan pattern and paint flow • Versatile guns for many different applications ECCO is proposing a range of different automatic and manual guns APPLICATIONS MATERIALS TYPE • Automotive • Solvent & water based • Tier 1 Automotive • Fillers • Plastic consumer goods • UV curing paint • Aerospace • 2K materials • Agriculture equipment • Lacquers and sealants • Wood Furniture/ joinery • Stain and varnishes • Leather industry • Release agent • Ceramics and enamel • Adhesive • General Industry • Truck and Bus for industrial applications. A very large range of air caps, fluid nozzles and needles in sizes and materials (SS, tungsten carbide) allows you to optimize the gun for your application. –3– LOW PRESSURE AUTOMATIC SPRAY GUNS ECCO 75AP ECCO 70AS The ECCO 75 AP is designed for applications where the areas are small and narrow. ECCO70AS is the best choice for use with water or solvent borne materials on all types It has a 70% reduced inner space for the paint (vs. E70AS), which reduces the paint of robots and reciprocators. ECCO 70AS ensures a uniform spray pattern even after consumption when many color changes are made. Angles of paint channels have replacement of air cap and fluid nozzle. Due to reduced internal pressure drop of at- been optimized for best possible cleaning effect. ECCO 75AP represent the latest de- omizing and fan air, the ECCO 70AS can stabilize the output parameters. Atomizing and velopment in automatic guns. Well-known technology has been used in the air caps fan air is completely separated from the inlet to the air cap. Exterior surfaces are easy and nozzles, in combination with optimal design of the gun body. The result is a very to clean and treated to ensure minimum dirt collection. Built in strainer for optimum compact unit with highest possible core values in performance. TCP and interface is quality. For mounting plate for reciprocator or robot, see page 7, for strainer inserts 70 equal to the ECCO 70. µm - 250 µm, see page 13. Technical data ECCO 75AP Weight Technical data 490g Body SS Nozzle SS or TC** Air cap Alu/Tuf* Needle 4 mm SS or TC.** Sealings Teflon/Perfl.***, UHMV * Tuf is a unique process of hardening and reducing friction on aluminum ** Tungsten Carbide ECCO 70AS Weight *** Perfluor 128 is equal to Kalrez 4079 960 g Housing SS Cylinder Alu/Tuf* Nozzle SS or TC** Air cap Alu/Tuf* Needle 4 mm SS or TC** Sealings Teflon/Perfl.*** * Tuf is a unique process of hardening and reducing friction on aluminum ** Tungsten Carbide For Ecco 75AP Ord No. *** Perfluor 128 is equal to Kalrez 4079 For Ecco 70AS Ord No. Service set, internal parts 6004 0176 20 Service set, internal parts 6004 0018 10 Gasket set, for Ecco75AP & 70AS 6004 0019 20 Gasket set for Ecco 70AS 6004 0019 00 Gasket set, for Ecco75AP & 70AS 6004 0019 20 For Ecco 75AP: Viscosity SIS/DIN 4 (sec) Paint nozzle Ø mm* Air cap 0,5 F 0,6 0,8 0,8 0,8 1,1 F 1,1 G 1,1 F 1,1 G 1,2 1,3 G1,4 F 1,4 F 1,4 F 1,4 G 1,8 H 1,8 H 1,8 H 2,1 2,7 0 10 20 30 40 50 60 70 80 90 T278 6509 T297 T278 T278 T278 T297 T297 T297 T297 T278 T278F T297F4 T297F2 T297 T278 T272 T278 T272 T474 Ord. No. Paint nozzle Ø mm Air cap Ord. No. 0,5 F 0,6 F 0,6 F 0,6 0,8 0,8 F 0,8 1,1 1,1 1,1 F 1,1 1,3 G 1,4 F 1,4 G 1,4 G 1,4 F 1,4 G 1,8 2,1 2,7 T278 6514 6511 6509 T278 T278 6509 T278 T297 T297 6509 T278 T278 T297 278 T278 T297 6518 T374 T474 8611 6171 06 8611 6171 18 8611 6171 21 8611 6171 33 8611 6171 02 8611 6171 13 8611 6171 32 8611 617 03 8611 6171 10 8611 6171 24 8611 6171 34 86116171 22 8611 6171 00 8611 6171 07 8611 6171 08 8611 6171 12 8611 6171 27 8611 6171 82 8611 6171 43 8611 6171 40 8611 6175 05 8611 6175 18 8611 6175 08 8611 6175 09 8611 6175 24 8611 6175 11 8611 6175 15 8611 6175 16 8611 6175 17 8611 6175 01 8611 6175 13 8611 6175 00 8611 6175 02 8611 6175 03 8611 6175 21 8611 6175 12 8611 6175 44 8611 6175 45 8611 6175 43 8611 6175 49 100 F= Nozzle with large outside tip diam. G= Nozzle with smaller outside tip diam H = Tungsten carbide nozzle Other nozzle / air cap combinations are available. –4– For Ecco 70AS: Viscosity SIS/DIN 4 (sec) 0 10 20 30 40 50 60 70 80 90 100 F= Nozzle with large outside tip diam. G= Nozzle with smaller outside tip diam H = Tungsten carbide nozzle Other nozzle / air cap combinations are available. LOW PRESSURE AUTOMATIC SPRAY GUNS ECCO 60AS CONVENTIONAL, ECCO 65AS HVLP The ECCO 60AS and ECCO 65AS are compact and well suited for mounting on robot arms. The paint needle has air operated opening and closing by spring action. The short reaction time ensures a perfect spraying result and low paint consumption. The needle seal is adjustable during operation. Simple and rigid mounting. Precise alignment by locating pin. Large paint supply control with exact setting with stepped positions. ECCO 60AS/65AS are stainless steel versions for abrasive and corrosive fluids. The guns are service friendly, requiring only standard tools. For Ecco 60AS: Viscosity SIS/DIN 4 (sec) Technical data - ECCO 60AS CONVENTIONAL Paint nozzles Air cap Ord. No. 1.1 1.3 1.5 1.8 2.1 2.7 T278 T272 T272 T272 T374 T474 8611 6160 62 8611 6160 63 8611 6160 67 8611 6160 68 8611 6160 69 8611 6160 70 0.3 - 2.7 mm Paint connection G 3/8 Air connection Ø 8 and 10 mm Air consumption 250 - 700 l/min Weight 837 g 0 Paint nozzles 10 20 30 40 50 60 70 80 90 100 For Ecco 65AS: Technical data - ECCO 65AS HVLP 0.6 - 2.7 mm Paint connection Viscosity SIS/DIN 4 (sec.) G 3/8 Air connection Air pressure Paint nozzle Ø mm Ø 8 and 10 mm recommended 3 bar Air consumption approx. 260 l/min Weight 828 g 0 10 20 30 40 50 60 70 80 Special versions of Ecco65AS for leather applications: 90 Paint nozzle Ø mm Air cap Ord. No. 0.9 1.1 1.4 1.8 2.1 2,7 6509 6511 6514 6518 6521 6527 8611 6560 09 8611 6560 11 8611 6560 14 8611 6560 18 8611 6560 21 8611 6560 27 100 Paint nozzle Air cap Ord No. Ecco65AS Pro Leather 1,3 6514 8611 6561 12 Ecco65AS Pro Leather 1,2 6514 8611 6561 13 Ecco 65AS Pro Leather 1,4 6514 8611 6561 14 ACCCESSORIES FOR ECCO 60AS/65AS MOUNTING PLATE FOR ECCO 60AS/65AS The kit remote fan width control makes it possible to control the atomizing air and Complete mounting plate for automatic spray guns ECCO 60AS and ECCO 65AS, the fan width air separate. The internal air valve is then bypassed and does not have complete with connecting nipples, for all types of reciprocators. any function. Ord. No. Kit for remote fan width control for ECCO60AS 6003 6691 80 Kit for remote fan width control for ECCO 65AS 6003 9697 80 Service set for gun ECCO 60AS/65AS 6003 6572 00 Ord. No. Mounting plate for ECCO 60AS/65AS 6004 0085 00 –5– LOW PRESSURE AUTOMATIC SPRAY GUNS ECCO 40DA Technical data Paint nozzle diam. 0,3 - 2.7 mm Paint connection G 3/8 Air connection G 1/4 Air consumption 250 - 700 l/min Weight 305 g The ECCO 40DA is an automatic spray gun for spraying abrasive and other similar Paint nozzle material (i.e. vitreous enamel). The gun has no paint needle. The material flow is Ø mm Air cap Ord. No. accuratly controlled by a diaphragm, sealing against a tungsten carbide seat. 1.3 T272 8611 5210 25 ECCO 40DA is small and easy to install. Remote control set for monitoring atomizing air 1.5 T272 8611 5210 10 1.8 T274 8611 5210 66 2.1 T374 8611 5210 67 and fan air externally is avalable as an accessory. (Ord.No. 6101 5627 90) For more combinations see spare parts list. ECCO 40FA Technical data Paint nozzle diam. 1,3 - 2.7 mm Paint connection G 3/8 Air connection G 1/4 Air consumption 250 - 700 l/min Weight 305 g Paint nozzle Ø mm Air cap Ord. No. The ECCO 40FA is an automatic spray gun for spraying abrasive and other similar 1.3 T274 8611 5240 13 material (i.e. vitreous enamel). The gun has no paint needle. The material flow is 1.8 T274 8611 5240 18 controlled by an external valve. 2,1 T374 8611 5240 21 2.7 T474 8611 5240 27 For more combinations see spare parts list. ECCO 71FA Technical data Paint nozzle diam. 0,3 - 2.1 mm Paint connection see mounting plate Air connection see mounting plate Air consumption 250 - 700 l/min Weight 305 g Paint nozzle Ø mm Air cap Ord. No. 1.3 T274 8611 5271 13 material (i.e. vitreous enamel). The gun has no paint needle. The material flow is 1.8 T274 8611 5271 18 controlled by an external valve. To be mounted on a mounting plate. 2,1 T374 8611 5271 21 2.7 T474 The ECCO 71FA is an automatic spray gun for spraying abrasive and other similar 8611 5271 27 For more combinations see spare parts list. –6– ACCESSORIES LOW PRESSURE AUTOMATIC SPRAY GUNS GUN ADAPTER FOR ROBOT MOUNTING PLATE WITH SCREW All gun adapters are produced in aluminum coated for mechanical and chemi- This universal mounting plate is produced in SS or aluminum with coating. Interface cal resistanse to all types of paints and solvents. The aluminum also gives a better for all ECCO 70, 71 and 75 guns. Can be used for mounting on robots, reciprocators sealing surface to the gun and the hose kit, compared to plastic adapters. TCP remains or other installations. Is prepared for paint circulation. This mounting plate is mounted unchanged to standard gun adapters. Interface for all ECCO 70As and 75AP. on the robot/reciprocator with screw. Push-in fittings for air: 8mm for fan width and atomizing air, 6mm for pilot air. Ord. No. Gun adapter for robot (60°) ABB 6004 0099 00 Ord. No. GUN ADAPTER WITH DUMP VALVE Mounting plate SS 6003 9770 20 Mounting plate Aluminum 6003 9770 25 MOUNTING PLATE WITH GUIDE PIN This universal mounting plate fits all ECCO 70,71 and 75 guns. Can be used for mounting on robots, reciprocators or other installations. Is prepared for paint circulation. The mounting plate is complete with a 13mm guide pin for assembly. Ord. No. Gun adapter with dump valve, compl. for robot (60°) ABB 6004 0099 50 PAINT CONNECTIONS Ord. No. 6003 9770 43 Mounting plate with guide pin Larger sized paint connections for mounting plate 6003 9770 20-25 Ord. No. Paint connection 3/8” 6003 9770 51 ECCO CAP CLEANER The ECCO cap cleaner is the perfect choice to be used with ECCO 70/75 range of automatic guns. With this device you are securing production quality by knowing that the air cap is always clean. The 4+4 nozzles clean and dry the air cap in just a few seconds. Solvent and dumped paint material can also easily be collected for reducing waste handling in the booth. The cap cleaner is available in alternative models for single, dual or triple guns. Can be adapted to other gun models, please contact Ecco for information. Ord. No. ECCO cap cleaner 6004 0101 00 ECCO cap cleaner twin 6004 0101 40 ECCO cap cleaner triple 6004 0101 50 –7– ECCO LOW PRESSURE MANUAL GUNS - FOR ALL PROFESSIONAL USERS Our robust and high performance guns comes in three different versions: • Pressure feed • Suction feed • Gravity feed All guns can be equipped with Conventional, HVLP and High Efficient technology. Stainless steel tips and needles for use with water based materials are standard on all guns. VERSATILE GUN FOR DIFFERENT APPLICATIONS The manual low pressure spray guns can be adapted according to different customers needs by various combinations of components. Fan width control can in addition to adjustable control be lockable, preset, quick- or max/min-adjustable. The gun can be used with or without control on the needle, with different sizes of connection nipples, and with different types and materials for the fluid needle, ie tungsten carbide, plastic or stainless steel. BUILD IN FILTER FOR OPTIMUM QUALITY The manual low pressure spray guns can be equipped with a replaceable strainer inside the fluid nozzle which is filtering the paint just before leaving the gun. The strainer will reduce the risk that any contamination caused by the fluid pipes or hoses reaches the surface. The main advantage is that the strainer will homogenize the paint, especially when metallic base coat is applied. TWIN AIR PASSAGES Ensuring minimum pressure drop in the gun which is essential to obtain highest atomization. UNIQUE AIR CAPS The treated aluminum air cap gives a harder surface, extented life and improved spray pattern. PROTECTED FLUID NEEDLE The paint needle is protected from paint build up and possible damage. COMPACT DESIGN The ECCO manual low pressure spray guns have a light weighted body, making the work easier for the painter. Compact design and smooth surfaces BALANCE Perfect balance, especially in combination with the ECCO Ergotube™ (see page 15). –8– makes the gun easy to clean. ECCO 35/352 - THE GUN THAT FITS EVERY HAND The ECCO 35 manual spray gun is designed with the firm intention to offer a gun with exceptional ergonomic and high quality. The gun body is made in anodized aluminum in order to optimize balance and weight. ECCO 35 is produced to fulfil the application demands for all types of fluids, or instance, water born paint and high solids. The inside paint channel is designed to be easy to clean, which saves time and solvent when changing colour. Different control possibilities for the ECCO 35 are; air amount, fluid amount and width of spray pattern. The ECCO 35 spray gun can be equipped with a wide range of paint nozzles, air caps and needles to ensure an optimized application of all normally used materials. The different nozzle combinations also includes a range of HVLP alternatives. PRESSURE FEED - ECCO 35 Pressure feed spray gun. Fluid supplied from pressure pots, pumps or circulation systems. Technical data Paint nozzles 0.2 - 2.7 mm Paint connection G 3/8 Air connection G 1/4 Air pressure max. 7 bar Air consumption 250 - 700 l/min Weight 521 g Viscosity SIS/DIN 4 (sec.) 0 10 20 30 40 50 60 70 80 90 Paint nozzle Ø mm Air cap Ord. No. 0.9 1.1 1.4 1.8 2.1 2.7 6509 6511 6514 6518 6521 6527 8611 3540 09 8611 3540 11 8611 3540 14 8611 3540 18 8611 3540 21 8611 3540 27 100 GRAVITY FEED - ECCO 352 Gravity feed spray gun, (see page 14 for alternative cups). Technical data Paint nozzles 0.2 - 2.7 mm Paint connection G 3/8 Air connection G 1/4 Air pressure max. 7 bar Air consumption 250 - 700 l/min Weight 694 g Viscosity SIS/DIN 4 (sec.) 0 10 20 30 40 50 60 70 80 90 Paint nozzle Ø mm Air cap Ord. No. 0.9 1.1 1.4 1.8 2.1 2.7 6509 6511 6514 6518 6521 6527 8611 3542 09 8611 3542 11 8611 3542 14 8611 3542 18 8611 3542 21 8611 3542 27 100 –9– ECCO 40S/401S/402S CONVENTIONAL PRESSURE FEED - ECCO 40S Pressure feed spray gun. Fluid supplied from pressure pots, pumps or circulation systems. Technical data Paint nozzles 0.3 - 6.5 mm Paint connection G 3/8 Air connection G 1/4 Air pressure max. 7 bar Air consumption 250 - 700 l/min Weight 568 g Viscosity SIS/DIN 4 (sec.) 0 10 20 30 40 50 60 70 80 90 Paint nozzle Ø mm Air cap Ord. No. 1.1 1.3 1.5 1.8 2.1 2.7 T278 T272 T272 T272 T374 T474 8611 4040 11 8611 4040 13 8611 4040 15 8611 4040 18 8611 4040 21 8611 4040 27 100 More nozzle/air cap combinations see separate spare part list. SUCTION FEED - ECCO 401S Suction feed spray gun ECCO 401S with 1.0 lit. suction cup, (see page 14 for alternative cups). Technical data Paint nozzles 0.3 - 2.7 mm Paint connection G 3/8 Air connection G 1/4 Air pressure max. 7 bar Air consumption 180 - 600 l/min Weight 949 g Viscosity SIS/DIN 4 (sec.) 0 10 20 30 40 50 60 70 80 90 Paint nozzle Ø mm Air cap Ord. No. 1.2 170 8611 4010 12 1,3 273 8611 4010 13 1.5 1.8 2,1 2,7 273 271 375 475 8611 4010 15 8611 4010 18 8611 4010 21 8611 4010 27 100 More nozzle/air cap combinations see separate spare part list. GRAVITY FEED - ECCO 402S Gravity feed spray gun with 0.5 lit cup with drip guard, (see page 14 for alternative cups). Technical data Paint nozzles 0.8 - 6.5 mm Air connection G 1/4 Air pressure max. 7 bar Air consumption 200 - 500 l/min Weight 654 g Viscosity SIS/DIN 4 (sec.) 0 10 20 30 40 50 60 70 80 90 Paint nozzle Ø mm Air cap Ord. No. 1.2 1.3 1,5 1.8 2.1 170 273 375 271 375 8611 4020 12 8611 4020 13 8611 4020 15 8611 4020 18 8611 4020 21 100 More nozzle/ air cap combinations see separate spare part list. – 10 – ECCO 65S/651S/652S HVLP PRESSURE FEED - ECCO 65S Pressure feed HVLP-spray gun. Fluid supplied from pressure pots, pumps or circulation system. Technical data Paint nozzles 0.6 - 2.7 mm Paint connection G 3/8 Air connection G 1/4 Air pressure rec. 3 bar Air consumption approx. 260 l/min Weight 565 g Viscosity SIS/DIN 4 (sec.) 0 10 20 30 40 50 60 70 80 90 Paint nozzle Ø mm Air cap Ord. No. 0.9 1.1 1.4 1.8 2.1 2,7 6509 6511 6514 6518 6521 6527 8611 6540 09 8611 6540 11 8611 6540 14 8611 6540 18 8611 6540 21 8611 6540 27 100 SUCTION FEED - ECCO 651S Suction feed HVLP-spray gun ECCO 651S with 1.0 lit. suction cup (see page 14 for alternative cups). Technical data Paint nozzles 1.1 - 2.7 mm Paint connection G 3/8 Air connection G 1/4 Air pressure rec. 3 bar Air consumption approx. 260 l/min Weight 947 g Viscosity SIS/DIN 4 (sec.) 0 10 20 30 40 50 60 70 80 90 Paint nozzle Ø mm Air cap Ord. No. 1.1 1.4 1.8 2.1 2,7 6511 6514 6518 6521 6527 8611 6541 11 8611 6541 14 8611 6541 18 8611 6541 21 8611 6541 27 100 More nozzle / air cap combinations see separate spare part list. GRAVITY FEED - ECCO 652S Gravity feed HVLP-spray gun with 0.5 lit cup with drip guard (see page 14 for alternative cups). Technical data Paint nozzles 0.9 - 2.7 mm Air connection G 1/4 Air pressure rec. 3 bar Air consumption approx. 260 l/min Weight 653 g Viscosity SIS/DIN 4 (sec.) 0 10 20 30 40 50 60 70 80 90 Paint nozzle Ø mm Air cap Ord. No. 0.9 1.1 1.4 1.8 2,1 6509 6511 6514 6518 6521 8611 6542 09 8611 6542 11 8611 6542 14 8611 6542 18 8611 6542 21 8611 6527 27 100 More nozzle/air cap combinations see separate spare part list. – 11 – AIR CAP SELECTION GUIDE • • • • • • • • • • • • • • • • • • • • • • • • • • • • – 12 – • • • • • • • • • • • • • General Industry • • • • Wood • • • • • • Glue 0.3-1.8 0.3-1.8 0.3-1.8 0.3-1.8 2.1-2.7 2.1-2.7 2.7 2.1 2.7 1.1-1.4 0.8-1.8 0.8-1.8 1.8 2.1 2.7 Plastic T272 T274 T278 T297 T374 T378 T474 M370 M470 3503 271 273 275 375 475 Ceramic Paint nozzle Leather Air cap Automotive AIR CAP GUIDE FOR VARIOUS APPLICATIONS • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Appr. air consumption at 4 Bar (lit/min) Ecco 65AS - automatic Ecco 65S - Pressure Ecco 652S - Gravity cup Ecco 651 - Suction cup • • • • • • Ecco 70/75 - automatic • • • • • • • • • • • • • • • Ecco 60AS - automatic • • • • • • • Ecco 35 - Pressure 0.3-1.8 0.3-1.8 0.3-1.8 0.3-1.8 2.1-2.7 2.1-2.7 2.7 0.6-0.9 1.1 1.2-1.6 1.8 2.1 2.7 2.1 2.7 1.1-1.4 0.8-1.8 0.8-1.8 1.8 2.1 2.7 Ecco 352 - Gravity cup T272 T274 T278 T297 T374 T378 T474 6509 6511 6514 6518 6521 6527 M370* M470* 3503 271 273 275 375 475 Ecco 40S - Pressure & Ecco40DA Paint nozzle Ecco402S - Gravity cup Air cap Ecco401S - Suction cup AIR CAP GUIDE FOR LOW PRESSURE SPRAY GUNS 480 480 480 460 510 510 510 270 270 270 270 270 270 265 305 250 380 370 380 385 385 * Round spray cap ACCESSORIES FOR LOW PRESSURE SPRAY GUNS NOZZLE SET - ECCO 35/352 SERVICE KIT Nozzle set for all ECCO 35 guns, consists of air cap, fluid nozzle and paint needle. Contains gaskets, seals and other wear components. Standard nozzle set for normal paint types with air cap and fluid nozzle in stainless Detailed installation instructions included. steel and paint needle in plastic. Special nozzle set for abrasive paint types with air cap, fluid nozzle and paint needle in tungsten carbide Standard nozzle set - for normal paint Paint nozzle Ø mm Ord. No. ECCO 35 / 352 0,9 6004 0277 09 (6509) For gun ECCO 35/352 1,1 6004 0277 11 (6511) For gun ECCO 40S/65S 1,4 6004 0277 14 (6514) 1,8 6004 0277 18 (6518) 2,1 6004 0277 21 (6521) Strainer made of nylon. Fits behind the paint nozzle. 2,7 6004 0277 27 (6527) For manual ECCO 40S, ECCO 65S models and for ECCO 70AS . Special nozzle set - for abrasive paint Paint nozzle Ø mm ECCO 35 1.3 6004 0279 13 (T272) 1.4 6004 0279 14 (6578) 6004 0278 14 (6514) 1.8 6004 0279 18 (T274) 6004 0278 18 (6518) 2.1 6004 0279 21 (T374) 6004 0278 21 (6521) 2.7 6004 0279 27 (T474) 6004 0278 27 (6527) 6003 9095 35 6003 9095 00 STRAINER INSERT ECCO 352 For ordering separate parts, see spare part lists. Paint needle is also available in stainless steel. NOZZLE SET - ECCO 40S/401S/402S Consists of air cap, fluid nozzle in stainless steel and paint needle in nylon. For all manual ECCO 40 spray guns. Mesh size mesh / µm Colour Qty per set Ord. No. 60 250 White 10 6103 3200 00 100 150 Yellow 10 6103 3201 00 200 70 Black 10 6103 3202 00 VISCOSITY CUP DIN 4 Cup made of plastic or aluminum for measuring the viscosity. Paint nozzle Ø mm ECCO 40 ECCO 401, 402 1.3 6003 9772 13 (T272) 6003 9771 13 (273) 1.5 6003 9772 15 (T272) 6003 9771 15 (273) 1.8 6003 9772 18 (T272) 6003 9771 18 (271) 2.1 6003 9772 21 (T374) 6003 9771 21 (375) 2.7 6003 9772 27 (T474) For ordering separate parts, see spare part lists. Paint needle is also available in stainless steel and in tungsten carbide. NOZZLE SET - ECCO 65S/651S/652S Consists of air cap, fluid nozzle in stainless steel and paint needle in nylon. For all manual ECCO 65 spray guns. Ord. No. Plastic 6803 3567 00 Aluminum 6003 7582 00 CLEANING BRUSH For cleaning nozzles and paint channels. Paint nozzle Ø mm ECCO 65, 651, 652 1.1 6003 9235 11 (6511) 1.4 6003 9237 14 (6514) 1.8 6003 9239 18 (6518) Diameter, mm Ord. No. 2.1 6003 9242 21 (6521) 10 6000 8004 00 2.7 6003 9246 27 (6527) 17 6000 8001 00 For ordering separate parts, see spare part lists. Paint needle also available in stainless steel and in tungsten carbide. – 13 – ACCESSORIES FOR LOW PRESSURE SPRAY GUNS CUPS FOR MANUAL SPRAY GUNS - LOW PRESSURE Suction cups for ECCO Manual Low Pressure spray guns ECCO SD 10 aluminum, 1.0 lit., 530 g 6803 4867 00 SD 15 aluminum, 1.0 lit. 6003 9714 00 Drop-free diaphragm for SD15 (set of 5 pcs) 6003 9684 00 Gravity cups for ECCO Manual Low Pressure spray guns Ord. No. Plastic cup G6, 0,6 lit. (for spray gun Ecco 35) 6101 5560 86 Plastic cup G5, 0.5 lit. 6101 5560 00 Plastic cup G1, 0.125 lit. 6101 5560 95 Paint filter for gravity cup 100 Mesh 6003 9752 05 Adapter for 3M Cup (for spray guns Ecco 40/65) 6004 0065 00 Adapter for 3M Cup (for spray gun ECCO 35) 6004 0065 35 AIR FILTER/PRESSURE REGULATOR STRAINER SET FOR PAINT CUPS Dr y and clean air at a constant Fits on the suction pipe with outside diam. 9 -12 mm. pressure is an important factor to achieve Size 80 mesh, 10 pcs. per set. a good result when spraying. LR 510 R is an efficient combined air filter, wa- Ord. No. For cup PRC2, SD10, SD 15 6003 7886 00 ter trap and pressure regulator. Compact design and easy maintenance PRC MINI & PRC 2, PAINT CUPS ensures high relia bility. It is easy to install, and is equipped with air regulator and gauge. Two guns can be connected at the same time. The air filter will collect particles larger than 15 µm. Technical data Inlet connection thread G1/2 female Outlet connection thread Max. working pressure Capacity at a primary circuit pressure at 6 bar G 1/4 male - primary 14 bar - secundary 8 bar 1 500 l/min Pressure cup for ECCO Manual Low Pressure spray guns Ord. No. Ord. No. LR 510 R – 14 – 8202 0212 52 PRC Mini, 2.0 lit. 8622 0200 00 PRC 2, 2.5 lit. 8622 0100 00 ECCO HOSES FOR LOW PRESSURE ECCO ERGOTUBE - THE ERGONOMIC WAY OF SUPPLYING PAINT ECCO Ergotube is a unique system to supply air and paint to the spray gun through a patented combo-hose, where the paint hose is placed inside the air hose. The ECCO Ergotube™ solution reduces the total weight and twist torque, making the handling of the gun much easier for the painter. The ECCO Ergotube hose can be used for most types of paint (primer, base-, top- and clear coat) as the material of the paint hose reduces the risk of contamination in the final coating of the surface. The paint hose in teflon (FEP as standard in Ø 4-6 mm internal) makes flushing easier and reduces the use of solvent. The special finish on the outer surface of the air hose prevents paint from adhering to it, making cleaning easier. Also available with paint hose in PTFE. Length, m Rec fluid viscosity, sec. SIS/DIN 4 Dimension air hose/paint hose Ord. No. 2 0-50 Ø 10 mm (3/8”) / Ø 8/6 mm 6003 9798 02 3 0-30 Ø 10 mm (3/8”) / Ø 6/4 mm 6003 9796 03 4 0-45 Ø 10 mm (3/8”) / Ø 8/6 mm 6003 9798 04 5 0-30 Ø 10 mm (3/8”) / Ø 6/4 mm 6003 9796 05 6 0-27 Ø 10 mm (3/8”) / Ø 6/4 mm 6003 9796 06 6 0-40 Ø 10 mm (3/8”) / Ø 8/6 mm 6003 9798 06 7 0-25 Ø 10 mm (3/8”) / Ø 6/4 mm 6003 9796 07 8 0-30 Ø 10 mm (3/8”) / Ø 8/6 mm 6003 9798 08 10 0-25 Ø 10 mm (3/8”) / Ø 8/6 mm 6003 9798 10 Other sizes available on request. Paint connecting nipple for Ergotube™ Dimension hose Ord. No. Ø 4/6 mm 6101 5021 91 Ø 6/8 mm 6101 5021 92 THROTTLE VALVE To be mounted on the air inlet of the gun. Connection threads: G 1/4 female - G 1/4 male. AIR HOSE/COUPLING Despite its strength it is flexible enough to accompany the gun movements. Ord. No. Per metre or in standard 8 m lengths incl. couplings G 1/4 female with cap nut. For ECCO spray guns 40S, 401S, 402S, 65S, 651S, 652S, 35, 352 6003 8002 00 PAINT AND AIR VALVES Inside Ø Ord. No. Ord. No. Ord. No. mm/inch per metre coupling G 1/4 compl. 8 m 6.3 1/4 6803 6686 00 6001 1235 00 8.0* 5/16 6003 7346 00 6003 7338 00 6003 7363 08 9.5 3/8 6803 6687 00 6001 1239 00 6203 1460 08 * Recommended. Max. working Connection thread PAINT HOSE/COUPLING ECCOflex is resistant to paints solvents, weak acids or water at temperatures of Hole Ø mm pressure, bar Ord. No. G 1/4 male 6 40 6803 0300 00 G 3/8 male 9 40 6803 0301 00 G 1/4 female 7 40 6003 7774 00 up to +100°C. Outer sheating of reinforced polyester and the inne hose of nylon. Per metre or L= 8 m, incl. coupling G 3/8 female with cap nut. CONNECTING NIPPLE Jointing nipples with cone for hose coupling. Inside Ø Ord. No. Ord. No. Ord. No. Thread male Hole Ø mm Material Ord. No. mm/inch per metre coupling G 3/8 compl. 8 m G 1/4 - G 1/2 7 Stainless Steel 6002 0236 46 6.3* 1/4 6803 6684 00 6003 5629 00 6003 7366 08 G 3/8 - G 1/4 7 Stainless Steel 6002 0238 46 9.5 3/8 6803 6685 00 6001 1241 00 6003 7369 08 M 14x1 - G 1/4 8 Stainless Steel 6102 9314 46 * Recommended. – 15 – ECCO SPRAY PACKS READY-TO-USE SPRAYING UNITS ECCO FEED SPRAY PACKS The ECCO Feed Spray Pack are using air powered piston or diaphragm pump. Compact and light equipment, ready-to-use and easy to clean. ECCO FEED SPRAY PACK CONSISTS OF: • Paint feeding pump with silencer and strainer • Paint pressure regulator with gauge for precise settings of the paint pressure. The regulator also works as a pulsation damper • Reduction valve with gauge for precise settings of the air pressure • An ECCO 35 including a paint nozzle and air cap that can handle the most common fluids • All necessary valves, hoses and couplings • Earthing device SPRAY PACK 314B SPRAY PACK 313E Ord. No. Ord. No. Spray Pack 313E 8613 2311 50 Spray Pack 314B 8613 2311 51 Spray gun ECCO 35 8611 3548 14 Spray gun ECCO 35 8611 3548 14 Pressure Cup PRC mini 2,0 l 8622 0200 00 Pressure Tank P10R 8622 0216 09 ECCO Ergotube 1,5m 6003 9900 61 ECCO Ergotube 5 m 6003 9796 05 – 16 – ECCO SPRAY PACKS READY-TO-USE SPRAYING UNITS SPRAY PACK 315 (DIAPHRAGM) SPRAY PACK 317 (PISTON) For all types of paint. Mounted on a tubular steel frame, bracket for wall mounting or For all types of paint. Mounted on a tubular steel frame, bracket for wall mounting or on a lid for 20 lit. container. Max. air pressure 8 bar. Max paint pressure 8 bar. on a lid for 20 lit. container. Max. air pressure 8 bar. Max paint pressure 4 bar. The Spray Pack consists of: The Spray Pack consists of: • Paint feeding unit: ECCO PSU AL15 • Paint feeding unit: ECCO PSU A2 • Spray gun: ECCO 35 • Spray gun: ECCO 35 • ECCO Ergotube: 5 m • Paint hose 8 m • Air hose: 8 m With spray gun ECCO 35: Ord. No. With spray gun ECCO 35 Ord. No. Spray Pack 315 (steel frame) 8613 2311 61 Spray Pack 317 (steel frame) 8613 2311 70 Spray Pack 315L (lid for container 20 lit.) 8613 2311 62 Spray Pack 317L (lid for container 20 lit.) 8613 2311 71 Spray Pack 315B (for wall mounting) 8613 2311 63 Spray Pack 317B (for wall mounting) 8613 2311 72 Optional equipment: Wheel set for Spray Pack 315 (to be mounted on the steel frame) Ord. No. 6004 0169 70 Optional equipment: Wheel set for Spray Pack 317 (to be mounted on the steel frame) Ord. No. 6004 0169 70 – 17 – ECCO AIRLESS PAINT SPRAYING - FOR APPLYING THICK COATS ON LARGE AREAS WHAT IS AIRLESS SPRAY PAINTING? At airless spray painting, paint is fed at high pressure from a pump to spray gun. Due to the high paint pressure, the paint is atomised as it passes the spray tip of the spray gun. The airless spray painting method is particularly suitable for applying thick coats on large areas. It is by far the most popular method for the anti-corrosion treatment of steel structures and for painting the insides and outsides of buildings. It is also used by the manufacturing industry to paint furniture, machines etc. sometimes in combination with hot spray painting. ADVANTAGES • High production capacity • Good coverage of surface depressions • Thick coat of paint in a single pass • High viscous paints can be sprayed APPLICATIONS • Ship building • Corrosion protection • Train / Railways MATERIAL • Water- and solvent borne materials • High solid coatings • Anti corrosive coatings ECCO 360 WHAT IS AIR ASSIST? Air Assist spray painting first partially atomizes the fluid with a special fluid nozzle tip similar to a standard airless tip. Second, they complete the atomization with small amounts of compressed air from the face and/ or the horns of the air nozzle that they use. The result is a finely atomized spray pattern closely resembling that of a compressed air system. The paint is supplied from a high pressure pump and is atomized by the spray tip. Additional air meets the spray fan at the tip to ensure a smooth-edged spray pattern. Air Assist spraying gives a soft spray patern with high finish, high capacity and less spray mist. ECCOMiX Air Assisted Automatic gun ADVANTAGES • Easy to adjust spray pattern with high paint pressure • Soft spray pattern with high finish • High capacity and less spray mist APPLICATIONS • Wood • Steel MATERIAL • Water- and solvent borne materials • Acid-curing laquer • Polyurethane • 2-component paints • Stain • UV-hardening materials • • UVAirless Spray Pack – 18 – ECCO 380A & 380 AA THE AUTOMATIC AIRLESS OR AIR ASSISTED GUN FOR ROBOTS ECCO 380A and 380AA are automatic Airless and Air Assist spray guns, designed to fit most types of high-pressure applications in automated production lines. Valve seat and needle tip is made in tungsten carbide for long durability. Both guns can be changed in less than two minutes without any loss in mechanical precision or performance. Material circulation is provided through the manifold even when the gun is in closed position. A wide variety of spray tips are available for all types of applications, with a perfect finish of the treated surface. • Air and fluid supply fittings in one compact manifold for optimum hose package design • Prepared for material circulation • Can also be delivered with air closing ADVANTAGES ECCO 380A & 380AA • Long life time due to high mechanical precession and carefully selected materials • Fast closing due to air and spring operated closing action • All components in contact with fluid are in stainless steel. • Easy access to vital parts and for easy maintenance • Flexible mounting arrangements - single mount, side by side or twin mount (only for 380A) ECCO 380A - AIRLESS (page 20) ECCO 380A is suitable for cold as well as hot industrial spraying, where high finish is required. It is available with or without nozzle fix in step of 30, 45 or 90 degrees. Sealing rings and o-rings made in FEP material for waterborne paint and UV paint, alternately sealing rings and o-rings in perflour 128 for higher demands. ECCO 380AA - AIR ASSIST (page 19) ECCO 380AA, is an automatic Air Assisted spray gun, designed to fit most types of applications in automated production lines, especially wood and steel industry. ECCO 380AA AUTOMATIC SPRAY GUN, AIR ASSIST Technical data Net weight 0,97 kg Maximum paint pressure 250 Bar Min/max. operating pressure 4/7 bar Connection for spray tip retaining ring Packing / seals Type M 36x1 Viton / Perflour 128 Ord. No ECCO 380AA - nozzle fix2 PF 8611 4138 01 ECCO 380AA - nozzle fix2 FPM 8611 4138 02 ECCO 380AA - nozzle fix2 FPM UV-paint 8611 4138 22 ECCO 380AA - nozzle fix2 PF material circulation 8611 4138 11 ECCO 380AA - nozzle fix2 FPM material circulation 8611 4138 12 ECCO 380AA - nozzle fix2 FPM material circulation UV-paint 8611 4138 13 For other combinations, please contact your nearest retailer of ECCO Products. Selection guide for spray tips see page 25 SINGLE MANIFOLD ECCO 380AA GUN BRACKET ECCO 380AA Prepared for material circulation. Gun bracket for the ECCO 380AA, designed for paint robots with hollow wrist. Detachable cover for easy access to the hose couplings. Paint hoses well protected all the way from the gun and through the inside of the robot arm. All parts are made in stainless steel high gloss polished gives a surface easy to clean. Complete with push in couplings for pilot air and swivelling couplings for the material, and prepared for material circulation. Technical data Material inlet/return 1/4” - 18 / 1/4” - 18 Pilot air 6/4 push in couplings 1/8” Atomization / Fan air 8/6 Push in couplings 1/8” Type Type Gun manifold single Ord. No 6004 0158 31 Ord. No Gun bracket for Motoman PX2850 6004 0104 48 Gun bracket for ABB enhanced hollow wrist 6004 0104 52 – 19 – ECCO 380A AND 320A - AIRLESS GUNS ECCO 380A AUTOMATIC SPRAY GUN, AIRLESS Technical data Net weight 0,81 kg Maximum paint pressure 250 Bar Min/max. operating pressure 4/7 bar Connection for spray tip retaining ring M 18x1 Packing / seals Viton / Perflour 128 Type Ord. No ECCO 380 A - nozzle fix PF 8611 4115 01 ECCO 380A - nozzle fix FPM 8611 4115 02 ECCO 380A - nozzle fix FPM UV-paint 8611 4115 71 ECCO 380AC - nozzle fix PF material circulation 8611 4115 61 ECCO 380AC - nozzle fix FPM material circulation 8611 4115 62 ECCO 380AC - nozzle fix FPM material circulation UV-paint 8611 4115 76 For other combinations, please contact your nearest retailer of ECCO Products. SINGLE/TWIN MANIFOLD ECCO 380A GUN BRACKET FOR ECCO 380A Mounting manifold for single ECCO Gun bracket for ECCO 380A, designed for paint 380A, also available for side by side robots with hollow wrist. Detachable cover for - mounting. Side by side mounting easy access to the hose couplings. Paint hoses well gives possibility to feed and circulate protected all the way from the gun and through two different materials to the guns. the inside of the robot arm. All parts are made in Mounting manifold for twin mount- stainless steel high gloss polished gives a surface ed ECCO 380A. Air connectors for easy to clean. Complete with push in couplings for opening and closing the guns. Mate- pilot air and swivelling couplings for the material, rial circulates through both the guns. and prepared for material circulation. Technical data Material inlet/return Single manifold 1/4” - 18 / 1/4” - 18 Pilot air 6/4 push in couplings 1/8” Type Twin manifold 3/8” * 3/8” 1/8” Type Ord. No Ord. No Gun bracket for Fanuc 6004 0104 33 Gun manifold single 6004 0159 98 Gun bracket for Motoman PX2850 6004 0104 49 Gun manifold single, side by side 6004 0159 99 Gun bracket for ABB enhanced hollow wrist 6004 0104 53 Gun manifold twin 6004 0159 83 ECCO 320A - THE RELIABLE AUTOMATIC SPRAY GUN ECCO 320A is a automatic spray gun with air-operated remote control. The needle valve is opened by an air operated piston and closed by a powerful coil spring. All components in contact with paint are made in stainless steel. Valve seat and needle tip are made in tungsten carbide for long durability. The gun is prepared for paint circulation when hot spraying. ECCO 320A can also be used as a qualified fluid valve, for example in colour changing systems and other applications with high demands for short reaction time and reliability. Technical data Net weight Maximum paint pressure Min/max. air pressure Paint connection Connection for spray tip retaining ring Operating air connector is designed for nylon hose Type ECCO 320A – 20 – 545 g 360 bar 6/8 bar 1/4” 18NPSM male M 18x1 Ø 6/8 mm Ord. No. 8611 4114 17 MANUAL AIRLESS SPRAY GUNS ECCO 360 – THE AIRLESS SPRAY GUN The ECCO 360 is a well tried spray gun which is suitable for most applications. All parts in contact with paint are made in stainless steel. The valve seat and needle tip are made in tungsten carbide for long durability. The paint channels in stainless steel are designed as a protection guard in front of the trigger. This makes this gun also suitable for hot spraying. The trigger force is low and can be adjusted to match the actual paint pressure. The ECCOflex airless hose is recommended for the 360 spray guns. Technical data Maximum paint pressure 360 bar Paint connection 1/4” 18NPSM male Connection for spray tip retaining ring M 18x1 Type Ord. No. ECCO 360 - with 2-finger trigger 8611 4116 05 ECCO 360C - with double paint channels for circulation 8611 4116 10 Note! No spray tip is included, for alternative spray tips see pag 23-24. ECCO 370 – THE AIRLESS SPRAY GUN ECCO 370 airless spray gun is suitable for cold as well as hot spraying of all fluids. The spray gun is extremely easy to operate thanks to the servo operated paint needle which is activated by the trigger. The fast shut off action of the paint needle also decreases the risk of drip in the beginning and in the end of the painting cycle. The ECCO 370R spray gun is equipped with external paint pipe which also serves as trigger guard. The gun body is short and is therefore useful in confined spaces where other spray guns have difficulties working. All parts in contact with paint are made in stainless steel. Valve seat and needle tip are made in tungsten carbide for long durability. The ECCO 370 spray gun suits both right- and left handed painters. The spray gun is specially designed for car body cavity spraying. For best ergonomics the airless hose ECCO ERGOTUBE™ Hp is recommended. Note! No spray tip is included, for alternative spray tips see page 23-24 Technical data Maximum paint pressure 360 bar Min/max. operating pressure Paint connection 6/8 bar 1/4” 18NPSM male Operating air connector G 1/4 Connection for spray tip retaining ring M 18x1 Type Ord. No. ECCO 370 - basic servo assisted spray gun 8611 4170 05 ECCO 370R - suits control system requiring 3/2 valve 8611 4170 50 ECCO 370R - suits the ECCO timer P requiring 2/2 valve 8611 4170 51 Note! No spray tip is included, for alternative spray tips see pag 23-24. – 21 – MANUAL AIRLESS AND AIR ASSIST SPRAY GUNS ECCO 510 – THE CONTRACTOR AIRLESS SPRAY GUN The ECCO 510 is a multi-purpose manual high-pressure spray gun with exchangeable paint filter in the spray gun handle. The gun features an integrated swivel coupling for connection to the paint hose to provide optimum freedom of movement when spraying in confined spaces. The 4-finger trigger makes the gun easy to operate also when using protection gloves. ECCOflex airless hose is recommended for the ECCO 510 spray gun. Note! No spray tip included, for alternative spray tips see page 23-24: Technical data Maximum paint pressure Paint connection Connection for spray tip retaining ring Type 350 bar 1/4” 18NPSM male 11/16”-16 Ord. No. 8611 4119 05 ECCO 510 ECCOMix THE AIR ASSIST SPRAY GUN WITH MULTIPLE FUNCTIONS FOR HIGH SURFACE FINISH ECCOMix The ECCOMix spray gun is using Air Assist technique; the air cap has unique injector technology which gives excellent atomisation and high surface finish. The force of the paint needle spring is adjustable for paint pressures from 80 bar up to 250 bar, this gives lowest possible trigger force. Separate regulations for round and flat jet, ensures optimal adjustment possibilities. Adjustable needle sealing in PTFE, air and paint inlet with swivelling connections. The gun is delivered with paint nozzle size 0,33 mm with 40 degrees spraying angle. For alternative spray tips see page 25 Technical data Maximum paint pressure Paint connection Air connection Type ECCOMix – 22 – 250 bar 1/4” 18NPSM male G 1/4” Ord. No. 8611 4120 00 AIRLESS SPRAY TIPS ECCOMANT - STANDARD SPRAY TIP The ECCOMANT tungsten carbide airless tips are manufactured to high standards of accuracy to ensure an accurate spray fan and promote long service life. The tips can be used with all ECCO airless spray guns as well as other spray guns. The tip is held by the retaining ring of the gun. The ECCOMANT spray tips has proven to be extra wear resistant compared to normal industry standard tips The table below on this pag sets out the recommended tips for different types of paint together and the list below shows the standard sizes normally available for of-the-shelf delivery. ECCO QUICK-TIP - SELF CLEANING SPRAY TIP The ECCO Quick-TIP can easily be cleaned by turning the tip 180° and a short paint blast will clear the spray tip orifice. The spray tip handle has an arrow, showing the spraying direction. ECCO Quick-TIP is manufactured from the highest quality tungsten carbide and stainless steel to ensure long lifetime in production. The holder for ECCO Quick-TIP is available with thread that suits all airless spray guns. HOW TO SELECT YOUR SPRAY TIP SELECTION OF SPRAY TIP Recommend spray tips for different paint types. For other paint types, please contact your nearest retailer of ECCO Products. Recommended tips, inch Normal spray viscosity Paint type Lacquer (sec. with SIS cup 4) 15 – 20 Shop primer 13-25 Polyurethane 25-60 Alkyd lacquer 30-60 Zinc epoxy 25-60 Modified vegetable oil 60-100 Epoxy tar Latex paint Solvent free epoxy 30 - 100 NORMALLY UNTHINNED 40 - 0,009 0,011 0,013 • • • • • • • • • • • 0,015 • • • • • 0,018 0,021 • • • • • • • • • • • • • 0,026 0,031 0,036 • • • • • • • • • – 23 – AIRLESS SPRAY TIPS SELECTION GUIDE FOR ECCOMANT & QUICK-TIP Orifice diameter STANDARD SPRAY TIP Capacity ² Capacity ² mm Fan angle ¹ litre/minute gallons/minute Strainer ³, mesh ECCOMANT ECCO QUICK-TIP 0,011 0,28 0,54 0,14 0,33 0,82 0,22 0,015 0,38 1,15 0,30 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 30 30 30 30 30 30 30 30 30 30 30 30 6803 1115 00 6803 1125 00 6803 1140 00 6803 1150 00 6803 1165 00 6803 1180 00 6803 1195 00 6803 1315 00 6803 1325 00 6803 1340 00 6803 1350 00 6803 1365 00 6803 1380 00 6803 1395 00 6803 1311 00 6803 1515 00 6803 1525 00 6803 1540 00 6803 1550 00 6803 1565 00 6803 1580 00 6803 1595 00 6803 1511 00 6803 1825 00 6803 1840 00 6803 1850 00 6803 1865 00 6803 1880 00 6803 1895 00 6803 1811 00 6803 2125 00 6803 2140 00 6803 2150 00 6803 2165 00 6803 2180 00 6803 2195 00 6803 2111 00 6827 0211 00 6827 0311 00 6827 0411 00 6827 0511 00 6827 0611 00 0,013 15° 25° 40° 50° 65° 80° 95° 15° 25° 40° 50° 65° 80° 95° 110° 15° 25° 40° 50° 65° 80° 95° 110° 25° 40° 50° 65° 80° 95° 110° 25° 40° 50° 65° 80° 95° 110° 25° 40° 50° 65° 80° 95° 110° 25° 40° 50° 65° 80° 95° 110° 40° 50° 65° 80° 95° 110° 40° 50° 65° 80° 95° 110° inch 0,018 0,46 0,021 0,53 0,023 0,58 0,026 0,031 0,036 0,66 0,79 0,91 1,64 0,43 2,14 0,56 2,40 0,63 3,24 5,00 6,37 0,86 1,32 1,68 6803 2350 00 6803 2365 00 6803 2380 05 6803 2395 00 6803 2311 00 6803 2625 00 6803 2640 00 6803 2650 00 6803 2665 00 6803 2680 00 6803 2695 00 6803 2611 00 6803 3140 00 6803 3150 00 6803 3165 00 6803 3180 00 6803 3195 00 6803 3111 00 6803 3640 00 6803 3650 00 6803 3665 00 6803 3680 00 6803 3695 00 6803 3611 05 1. When spraying water 2. Capacity at a fluid pressure of 140 bar, when spraying water 3. Recommended strainer in delivery circuit For other sizes, please contact your nearest retailer of ECCO Products. – 24 – 6827 0213 00 6827 0313 00 6827 0413 00 6827 0513 00 6827 0613 00 6827 0315 00 6827 0415 00 6827 0515 00 6827 0615 00 6827 0815 00 6827 0318 00 6827 0418 00 6827 0518 00 6827 0618 00 6827 0818 00 6827 0321 00 6827 0421 00 6827 0521 00 6827 0621 00 6827 0821 00 6827 0323 00 6827 0423 00 6827 0523 00 6827 0326 00 6827 0426 00 6827 0526 00 6827 0826 00 6827 0531 00 6827 0631 00 6827 0436 00 6827 0636 00 6827 0836 00 ECCOMIX SPRAY TIPS ECCOMIX SPRAY TIP Orifice diameter inch mm Fan angle * ECCOMIX SPRAY TIP 0.009 0,23 20° 6810 0920 00 40° 6810 0940 00 60° 6810 0960 00 20° 6810 1120 00 40° 6810 1140 00 60° 6810 1160 00 20° 6810 1320 00 40° 6810 1340 00 60° 6810 1360 00 20° 6810 1520 00 40° 6810 1540 00 60° 6810 1560 00 0011 0,013 0,015 0,28 0,33 0,38 * When spraying water ECCOMANT – AIR ASSIST SPRAY TIP Tungsten carbide nozzle designed for the ECCO 380AA, manufactured to high standards of accuracy for long lifetime and a precise spray pattern. The tip is held in correct position by the air cap and the retaining ring. Use the table on page 11 for selection of the right tip, different paint and viscosity demands different nozzle sizes. AIR ASSIST SPRAY TIP Capacity ² Capacity ² inch mm Fan angle ¹ litre/minute gallons/minute Strainer ³, mesh ECCOMANT 0.011 0,28 20° 0.54 0,14 200 6814 1120 00 30° 200 6814 1130 00 40° 200 6814 1140 00 50° 200 6814 1150 00 60° 200 6814 1160 00 Orifice diameter 0.013 0.015 0.017 0.019 0,33 0,38 0,43 0,48 200 6814 1320 00 30° 200 6814 1330 00 40° 200 6814 1340 00 50° 200 6814 1350 00 60° 200 6814 1360 00 80° 200 6814 1380 00 20° 0.82 0,22 100 6814 1520 00 30° 100 6814 1530 00 40° 100 6814 1540 00 50° 100 6814 1550 00 60° 100 6814 1560 00 80° 100 6814 1580 00 20° 1.15 0,30 100 6814 1740 00 50° 100 6814 1750 00 60° 100 6814 1760 00 80° 100 6814 1780 00 100 6814 1940 00 50° 100 6814 1950 00 60° 100 6814 1960 00 80° 100 6814 1980 00 40° 40° 1.50 1.91 0,40 0,54 1. When spraying water 2. Capacity at a fluid pressure of 140 bar, when spraying water 3. Recommended strainer in delivery circuit For other sizes, please contact your nearest retailer of ECCO Products. – 25 – AIRLESS SPARE PARTS SPRAY TIP HOLDER ECCO QUICK-TIP PAINT STRAINERS FOR AIRLESS GUNS Paint strainers for spray guns ECCO 510, 370F and 360F., Holder for spray tip ECCO Quick TIP. Mesh aperture Suitable for tips with Ord. No. mesh micron equivalent orifice diam. Ord. No. Graco 8611 4150 07 60 250 ≥ 0.019 6803 3516 00 11/16” - 16 ECCO 510, spraying systems, Graco, Blinks, 8611 4150 11 100 150 0.015 - 0.018 6803 3575 00 M18x1 ECCO 320A / 360 / 370, Deicke & Kopperschmidt 8611 4150 18 200 75 0.011 - 0.013 6803 3517 00 Thread For spray gun 7/8” - 14 PAINT STRAINERS FOR ECCOMIX GUNS AIRLESS TIP CLEANING NEEDLES Paint strainers for EccoMix spray gun. Easy way to clean blocked airless tips. 12 pieces included. Type Ord. No. 6003 8001 00 Airless tip cleaning needles WET FILM GAUGE Measuring range: 25 - 300 µm in steps of 25 µm 350 - 750 µm in steps of 50 µm 900 - 2000 µm in steps of 150 µm Type Wet film gauge – 26 – Ord. No. 6802 3558 00 Mesh aperture mesh micron 50 300 Ord. No. green 6803 3075 00 80 180 white 6803 3075 05 150 95 yellow 6803 3075 10 295 50 red 6803 3075 15 AIRLESS HOSES AND CONNECTIONS ECCOFLEX AIRLESS HOSE ECCO ERGOTUBE HP AIRLESS HOSE Properties: ECCO ERGOTUBE™ Hp for use with all servo assisted spray guns 370. The high pressure • paint hose is placed inside the air hose which leads the operating air to the spray gun. Excellent resistance to paints, solvents and chemicals. The gun is as easy to use as when using only one hose to the spray gun. Inner tube: Polyamide • Excellent flexibility • Extreme abrasion resistance • Static freed - 100% conductivity • Light weight • UV and ozone resistant Reinforcement: Carbon steel wire brass plated Paint pressure Temp. range: -40°C to +80°C Inside diameter paint hose: • Diam inside mm 6,3 inch Max working Stand. Connection pressure, bar. length m thread, mm Ord. No. 325 8 1/4” 18NPSM 6803 0745 08 1/4 9,5 3/8 400 10 Technical data Cover: Polyurethane 1/4” 18NPSM 6803 2082 10 max. 400 bar 4 mm Inner hose: Polyamide airless hose Reinforcement: Braided synthetic fibres Cover: Polyurethane Temp.range: -40°C to +80° 2-10 meter Length: Type Ord. No. 6003 9870 xx ECCO ERGOTUBE™ Hp For ECCO hoses; other lengths are available. Add two-digit designation for desired hose length to the actual ordering number. Example: 6803 0745 04 (for 4 m hose). WHIP END HOSES Whip end for connection immediately before the gun for increased mobility. Length: 1 m. Connection thread: 1/4” 18NPSM female - male. Diam.mm Inside.inch Ord. No. 3,2 1/8 6803 4920 00 4,6 3/16 6803 1741 00 SWIVEL COUPLINGS FOR HIGH PRESSURE HOSES To be mounted between the gun and the hose for icreased mobility. (Not intended for ECCO 510 or ECCO ERGOTUBE™ Hp.) TEFLON HOSE Airless hose resistent for particularly aggressive fluids. Couplings and braid in stainless steel. Material inside hose wall: Teflon. Connection thread Connection thread: 1/4” 18NPSM female. Max male Max. working bending Diam. Inside. pressure, Length radius, mm inch bar. m mm Ord. No. 6,3 3/16 175 7,5 60 6201 9264 00 Mesh aperture female Working mesh mm press. max Ord. No. 1/4” 18 NPSM 1/4” 18NPSM without strainer 400 bar 6803 5292 00 1/4” 18 NPSM 3/8” NPT without strainer 400 bar 6803 5664 00 TWIN HOSE PAINT/AIR NIPPLES Twin hose for use with Air Assisted spray guns. Jointing and connection nipples Inner tube: Polyamide for high pressure hoses. Cover: Polyurethane Bore Connection thread Diam inside Max working Stand. Connection mm inch pressure, bar. length m thread, mm Paint 4,6 3/16 235 10 1/4” 18NPSM Air 6,4 1/4 10 10 G1/4” Ord. No. mm Material Ord. No. 1/4” 18 NPSM male - 1/4” 18NPSM male 5 Stainless 6002 0234 00 G 1/4 male - 1/4” 18NPSM male 5 Stainless 6002 0233 00 G 3/8 male - 1/4” 18NPSM male 7 Stainless 6202 2197 00 1/4” 18NPT male - 3/8” NPT male 7 Steel 6803 5666 00 G 1/4 male - G1/2 male 7 Stainless 6002 0236 46 6003 7092 10 – 27 – ECCO POWER FLOW SPRAY PACKS - READY-TO-USE SPRAYING UNITS ECCO SPRAY PACKS ECCO offers a unique pneumatic driven pump range for airless and Air Assisted application of low and middle viscosity products. Spray Pack ECCO Power Flow is a complete set containing all required parts for quick and easy start-up. We give advice about what model and which nozzles that would be suitable for your specific application. The high pressure hose is delivered in standard length, but it can be adapted to customer’s demands. The high pressure spray gun is delivered with standard nozzle, swivelling coupling and whip end hose for good ergonomics. The Spray Packs ECCO Power Flow are delivered on a trolley. SPRAY PACK ECCO POWER FLOW 214S AA Spray Pack ECCO Power Flow is a complete set containing all required parts for quick and easy startup. We give advice about what model and which nozzles that would be suitable for your specific application. The hose is in a standard length of 10m but can be adapted to customer’s demands. Spray Pack ECCO Power Flow 214S AA includes hose and spray gun (ECCOMix). It produces a smooth finish, and can be used on many applications. Air Assist spraying is versatile; the operator can vary air volume, paint pressure, and spray pattern. Ord. No. Pump Unit 8613 2321 35 ECCO POWER FLOW 214S-T-AA Spray Gun Spray Tip Twin hose paint/air ECCOMix 0,013” / 40° 3/16” / 1/4” 10M Weight (Kg) For other combinations, please contact your nearest retailer of ECCO Products. – 28 – 27 HIGH PRESSURE SPRAY PACKS SPRAY PACK ECCO POWER FLOW 328S A A ready to use unit complete with regulators hose and spray gun. Spray Pack ECCO Power Flow 328S A includes a high pressure spray gun ECCO 360 with standard nozzle, swivelling coupling and whip end hose for good ergonomics. 8613 2321 38 Ord. No. Pump Unit ECCO POWER FLOW 328S-T-A Spray Gun ECCO 360 0,015” / 50° Spray Tip Airless hose 1/4” 10M Twin hose paint/air -------- Whip-end hose 1/8” 1M Swivel coupling 1/4” 18 NPSM - 1/4” 18 NPSM Weight (Kg) Spray Pack ECCO Power Flow 328S-A 26,5 For other combinations, please contact your nearest retailer of ECCO Products. SPRAY PACK ECCO POWER FLOW 328S AA A ready to use unit complete with regulators hose and spray gun. Spray Pack ECCO Power Flow 328S AA includes high pressure spray gun ECCOMix with standard nozzle, swivelling coupling and whip end hose for good ergonomics. 8613 2321 39 Ord. No. Pump Unit ECCO POWER FLOW 328S-T-AA Spray Gun ECCOMix 0,013” / 40° Spray Tip Airless hose ------ Twin hose paint/air 3/16” / 1/4” 10m Whip-end hose ---------- Swivel coupling 28,5 Weight (kg) Spray Pack ECCO Power Flow 328S-AA For other combinations, please contact your nearest retailer of ECCO Products. SPRAY PACK ECCO POWER FLOW 640S A Spray Pack ECCO Power Flow 640S A is a complete set containing all required parts for quick and easy start-up. The high pressure hose is delivered in standard length but can be adapted to customer’s demands.The high pressure spray gun is delivered with standard nozzle, swivelling coupling and whip-end hose for good ergonomics. Artiklenr Pump unit Spray gun Spray tip 8613 2322 78 ECCO POWER FLOW 640S-T-A ECCO 360 0,015” / 50° Airless hose 1/4” 10M Whip-end hose 1/8” 1M Swivel coupling 1/4” 18 NPSM - 1/4” 18 NPSM Weight (kg) 31,5 For other combinations please contact your nearest retailer of ECCO products.. – 29 – ELECTROSTATIC LOW PRESSURE ECCO XTATIC 6000 LOW PRESSURE ECCO Xtatic LP6000 – is the lightest and most compact low pressure electrostatic. Also Xtatic LP6000 offers you unmatched high transfer efficiency and is very environment friendly. The high transfer efficiency provides reduces paint consumption, high class finishing, minimizes over spray inside the paint booth, and thus reduces the operation costs. The guns gives maximum operator comfort, by reduced weight, size and trigger pull, and combined with the high transfer efficiency it reduces the paint work cycle and improves production efficiency. With Xtatic LP6000 you can apply a large variation of paints, including metallic and water born paints. Xtatic LP6000 is ATEX approved for operation in all safety. Complete gun including control unit, air cap, nozzle, air hose and cable (Note! No paint hose included) Ord No. ECCO XTATIC LP 6000 W - for water based paint. (Needs to be isolated from the environment) 8613 2630 14 ECCO XTATIC LP 6000 S - for solid paint 8613 2630 15 ECCO XTATIC LP 6000 M - for metallic paint 8613 2630 16 KEY ADVANTAGES FOR ECCO XTATIC LP6000 Light and compact = Ergonomic • Only 545 g weight • Easy to handle due to small size • Low operator fatigue due to low weight and low trigger pull High transfer efficiency = Save cost • High transfer efficiency due to new air cap design • Reduced paint consumption • Reduce paint work cycle • Minimizing overspray thus reduce maintenance costs High quality finish • Air cap design atomizing at very low pressure gives top finish • Superb wrap around effect and soft atomisation • Special version for metal finishing Safety • • • • ATEX approval and other international approvals Air flow switch Over current protection Cable breakage protection Key markets • Automotive industry • Tier 1 automotive • Electric appliances • Machinery • Metal furniture – 30 – ELECTROSTATIC LOW PRESSURE TECHNICAL DATA FOR SPRAY GUN ECCO XTATIC LP6000 Max voltage 60 kV Liquid pressure Normal 3 bar Max 6 bar Normal Air pressure 0,5 to 4 bar Max 6 bar Max air consumption 350 l/min Air inlet diameter G 1/4 (PF 1/4) Paint inlet diameter Connecting cable lenght G 1/4 (PF 1/4) 10 m (standard) - extension up to 30 m Size (WxHxL) 55x219x207 mm Weight (w/o cable, hose, nozzel) 545g TECHNICAL DATA FOR CONTROL UNIT EXC LP EXC LP Voltage control Stepwise from 20 to 60 kV DC Transmission voltage AC 24 V Max current 80 µA Input voltage 230 V, 50Hz Size (WxDxH) 330x125x260 mm Weight Approx. 5 kg Working enviroment Temp.: 0 to 45°C Humidity: 20 to 85% This control unit is cluded in the complete spray gun. TECHNICAL DATA FOR XTATIC AIR CAPS, NOZZLES AND ACESSORIES Type Ord. No Air cap NH 60 6004 0330 44*** Air Cap NH 61 6004 0330 43 Nozzle* 0,8 mm 6004 0330 50 Nozzle** 1,1 mm 6004 0330 51*** Nozzle** 1,6 mm 6004 0330 52 * Use with air cap HN61 ** Use with air cap HN60 ***Included in LP6000W, S, M Ord. No Remarks Extension cable (Zone 1) 6004 0330 31 10 m (max. ext. 30 m) Gun cover 6004 0335 15 10 pcs / set Metallic kit set 6004 0330 37 For conversion from solid to metallic paint usage. Paint hose 6003 7365 10 10 m Air hose 6003 7355 10 10 m*** ***Included in the complete spray gun – 31 – ELECTROSTATIC HIGH PRESSURE ECCO XTATIC 6000 HIGH PRESSURE ECCO Xtatic HP6000 – is the lightest and most compact air assisted airless electrostatic gun. Xtatic HP6000 offers you unmatched high transfer efficiency and is very environment friendly. The high transfer efficiency provides reduced paint consumption, high class finishing, minimizes over spray inside the paint booth, and thus reduces the operation costs. The guns gives maximum operator comfort, by reduced weight, size and trigger pull, and combined with the high transfer efficiency it reduces the paint work cycle and improves production efficiency. With Xtatic HP6000 you can apply a large variation of paints, including high solids, which can require up to 210 bar atomizing pressure. Xtatic HP6000 is ATEX approved for operation in all safety. Complete gun including control unit, air cap, nozzle, air hose and cable (No paint hose included) Ord No. ECCO XTATIC HP6000 KEY ADVANTAGES FOR E CCO XT ATIC HP6000 Light and compact = Ergonomic • Only 560 g weight • Easy to handle due to small size • Low operator fatigue due to low weight and low triger pull • Equipped with swivels on air and material hoses High transfer efficiency = Save cost • Over 90% transfer efficiency, under given circumstances • Reduce paint consumption • Reduce paint work cycle • Minimizing overspray thus reduce maintenance costs High quality finish • Air cap atomizing at 20 to 60 bar gives top finish • Patented feature allows to switch on and off the electrostatic effect as needed Application of high viscosity materials • New air cap design allow atomizing at max. 210 bar • High viscosity materials like high solid paints are applicable Safety • ATEX approval • Safety switch on trigger • Over current protection • Cable breakage protection Key markets • Off road equipment • Trucks • Trailer • Agriculture machinery • Rolling stock • General Industry – 32 – 8613 2640 14 ELECTROSTATIC HIGH PRESSURE TECHNICAL DATA FOR SPRAY GUN ECCO XTATIC HP6000 Max voltage 60 kV Normal Liquid pressure 3 to 160 bar Max 210 bar Normal Air pressure 2 to 5 bar Max 6 bar Max air consumption 150 l/min Air inlet diameter G 1/4 (PF 1/4) Paint inlet diameter 1/4 NPSM Connecting cable lenght 10 m (standard) - extension up to 30 m Size (WxHxL) 55x219x219 mm Weight (w/o cable, hose, nozzle) 560 g TECHNICAL DATA FOR CONTROL UNIT EXC HP EXC HP * Voltage control Stepwise from 20 to 60 kV DC Transmission voltage AC 24 V Max current 80 µA Input voltage 230 V, 50Hz Size (WxDxH) 200x125x260 mm Weight Approx. 5 kg Working enviroment Temp.: 0 to 45°C Humidity: 20 to 85% *Included in HP6000 TECHNICAL DATA FOR XTATIC AIR CAPS, NOZZLES AND ACESSORIES Orifice Diameter Discharge rate from nozzle (mL/min) Pattern width (cm) / Angle (°) 1/1000 (in) mm at 10MPa 10 0,25 390 300 6004 0335 60 6004 0335 56 6004 0335 57 11 0,28 440 340 6004 0335 61 6004 0335 53* 6004 0335 58 13 0,32 580 440 6004 0335 50 6004 0335 54 6004 0335 59 at 6MPa 10 ˜ 15 30° 15 ˜ 20 40° 20 ˜ 25 50° *Included in the spray gun Xtatic HP6000 Ord. No Remarks Extension cable (Zone 1) 6004 0335 31 10 m (max. ext. 30 m) Gun cover 6004 0335 15 10 pcs / set Gun filter 6803 3079 00/10/20 #60 */ #80 / #100 Paint hose 6803 0745 10 10 m Air hose 6003 7355 10 10 m* *Included in the spray gun Xtatic HP6000 – 33 – ECCO FLUID HANDLING SYSTEMS Designing a good fluid-handling system requires know-how and the right equipment. At ECCO we have a selection of equipment for your fluid handling needs: FEEDING • • • • • Pressure pots for low pressure feeding Feeding pumps – like diaphragm pumps or piston circulating pumps for low pressure Complete preassembled feeding units for low pressure Feeding pumps for high pressure application Transfer pumps from one tank to another AGITATING • Pneumatic driven stirrers REGULATING • Pressure regulators for low and high pressure • Back pressure regulators HEATING • Heating of the material for low and high pressure DOSING • 2K dosing system All of our fluid handling equipment is designed for the use of water based and solvent based materials. In the design we have minimized the trapping areas for the paint so as to ensure smallest amounts inside when you flush the equipment and thus reducing the need for cleaning liquids. Depending on your need we have various solutions and our certified distributors and we will assist you making the right choice for your system. – 34 – ECCO PSU-20 READY TO USE PAINT SUPPLY UNIT The Paint Supply Unit has all it’s functions located on the panel. This gives a very clear overview of the settings in minimum of time. All functions are located and prepared for production or cleaning/ flushing settings. No risk of using wrong settings after cleaning of filling the system. Just operate by a switch. All parts have been designed to reduce trapped paint pigments internally, and to reduce paint volume. Even change of paint filter can be done without one drop of paint spilled on external surfaces. One pump for all needs in low pressure systems for paint feeding, local or central. Suitable for all type of primer-, base- clear coat and catalyst. The same type of panel with stand is used for the different systems. This gives an easy installation and makes it easy to keep clean during operation. All parts in the stand and paint systems are made in stainless steel for optimal function. The construction gives a very clean surface around the paint systems, all the hoses and connections are placed in the same height as the pump panel and is protected by this. The whole design gives a very low sound-level and operative cost, often reduced by 50% or more. The unit is very user friendly, easy to install and service. The operator has all information clearly displayed and labelled and all service can be done rapidly on the functional parts without any risk of splashing paint or solvent. Speed control valve for stirrers air Relief valve for return paint pressure. motor. Pressure regulators and gauges for paint pressure, in/out. Alternative for Nitrogen in hardener system. Shut-off valves for: Relief valve for outgoing paint pressure. Drainage valve for filter and pump. Technical data Pump in SS Fliter house and cartridge in SS Paint pressure regulator in SS Back pressure regulator in SS Stand and spillage tray for container (20 lit.) Air motor with gear box for stirrer Cover (can be opened 1/3) Suspension device for cover in stand Propeller stirrer Base / Clear Base / Clear coat system coat system Solvent system 6004 0163 70 6004 0163 71 6004 0163 80 • • • • • • • • • Disc stirrer Shut-off valves for paint in/out Nitrogen pressure regulator Nitrogen container (40 lit.) Adjustable flow valve for circulation • • Paint feeding • Return paint feeding Catalyst / Nitrogen 6004 0163 90 • • • • • • • • • • • • • • • • • • • • • • • • • – 35 – ECCO LOW PRESSURE PUMPS - DIAPHRAGM ECCO FLOW CT15 / PN15 / ALT25 Lubrication free diaphragm pumps with non freeze and non stalling air system. The pumps same temperature range as CT15. The polypropylene pump can handle many of the have modular design, are easy to maintain and have high air efficiency. The CT15 is a fluids which the CT15 cannot. The ALT25 is a pump in aluminum with PTFE diaphragms, conductive plastic pump with diaphragms in PTFE, suitable for many pumpable fluids in valve seat in Nylon and ball in PTFE. Other material available as option, and can handle temperature range 0-66 C°. The PN15 is a polypropylene pump with PTFE diaphragms, fluid temperature up to 93 C°. ECCO FLOW CT15 ECCO FLOW PN15 ECCO FLOW ALT25 8621 0312 09 8621 0310 01 8621 0312 10 Pressure Ratio Capacity l/min 1:1 1:1 1:1 0-64 0-64 0-156 Inlet Air Pressure bar min/max 1,3 - 8,2 1,3 - 8,2 1,3 - 8,2 Air consumption at 8 bar, l/min 0-approx.565 0-approx.565 0-approx.1100 Self-Priming Yes Yes Yes Dry lift capacity at 6.8 bar 3,2 4,5 3,2 3,2 mm 3,2 mm 6,2 mm Max pumpable particle size mm Air inlet G 1/4 ext. G 1/4 ext. G 1/4 ext. Liquid inlet G 1/2” int. G 1/2” int. G 1” int. Liquid outlet G 1/2” int. G 1/2” int. G 1” int. Adjustable liquid connections yes yes yes Weight, kg 5,4 4,1 10,5 Housing material Diaphragm material, wet site/dry site Nylon PP Aluminum PTFE/Santopren PTFE/Geolast PTFE/Santopren PTFE Nitril PTFE Sealing rings ECCO FLOW AL15 / SS15 Metallic diaphragm pumps with small dimensions, but high performance. All components in direct contact with the fluid, such as valves, diaphragms, covers and manifolds, have been manufactured using materials which are highly resistant to physical and chemical wear, thus allowing you to handle the most of the existing liquids. Pressure Ratio Capacity l/min Inlet Air Pressure bar min/max bar ECCO FLOW AL15 ECCO FLOW SS15 8621 0520 01 8621 0510 01 1:1 1:1 0-52 0-52 1-8 1-8 0-approx.375 0-approx.375 Self-Priming Yes Yes Dry lift capacity at 6.8 bar 4,9 4,9 2,0 mm 2,0 mm Air consumption at 8 bar, l/min Max pumpable particle size mm Air inlet G 1/4 ext. G 1/4 ext. Liquid inlet G 1/2 int. G 1/2 int. Liquid outlet G 1/2 int. G 1/2 int. Adjustable liquid connections yes yes Weight, kg 3,8 6,1 Aluminum Stainless Steel (SS) Housing material Diaphragm material PTFE PTFE Sealing rings PTFE PTFE Valve seat/ball SS/SS SS/SS – 36 – CIRCULATING PUMP - PISTON ECCO TRANS FLOW 32S / 64S This compact pump can ensure feeding of multiple spray guns in small circulating systems without pulsation. The pump induces very little shear on paints and thus is very suited for water based materials. 2:1 ratio gives more power to overcome pressure drops in circulating systems. High output rate at low operating frequency reduces wear and maintenance. • Air motor: Quick change over pneumatic mechanism, Sensing valves, Control block and slider • Fluid section in Stainless steel, both piston rod, cylinder and 4 balls. • Hard coating piston and cylinder gives long lifetime • 4 ball pump • Compact and easy assembly • Little and easy maintenance • Long life small throat seal stuffing, fast & easily replaceable • High output at low frequency, giving little shear forces on paint • Pneumatic change over mechanism ensuring steady flow rate • Low wear = Low maintenance costs • Compact design: Ideal for small circulating systems • Especially suitable for sensative paints • Compact design, easy to install in cramped spaces Technical data Ecco TransFlow 32S Ecco Trans Flow 64S Transfer ratio: 2:1 Output per cycle: 240 cc 240 cc 4:1 Air motor piston diam: 80 mm 110 mm Stroke length: 70 mm 70 mm Output at 25 cycles/min 6 litres 6 litres Air inlet pressure max:: 6 bar 6 bar Outlet pressure max 12 bar 24 bar Air consumption max: 106 lit/min Inlet / Outlet connection G 3/4, G 3/8 Air inlet connection 1/2” 200 lit/min G 3/4, G 3/8 1/2” Type Ord. No. ECCO TRANS FLOW 32S 8621 0810 00 ECCO TRANS FLOW 64S 8621 0811 00 Dimensions in mm /inch Length Width without air preparation unit Width incl. air preparation unit Depth TransFlow 32S TransFlow 64S 484 / 19” 510 / 20” 210 / 8 1/4” 210 / 8 1/4” 430 / 17” 430 / 17” 160 / 6 1/4” 215 / 8,5” CIRCULATING FILTER ECCO BFS-101 Reliable high quality stainless steel filter housing with filter bag system. The filter ECCO BSF-101, delivered with one 100 micrometer NMO (Nylon Monofilamnent) filter bag, is a perfect fit for medium size circulating, such as aitomotive Tier1 or consumer electronic painting lines. A range of filters with suitable mesh sizes for this use are avaliable. Technical data Circulating filter ECCO BFS-101 Inlet connection thread: BSP 1” Outlet connection thread BSP 1” Max operating pressure 16 bar Paint filter for ECCO low pressure pumps Max Flow capacity: 6 m3 / h ECCO BFS-101 Volume 3 litres Weight 8 kg Filter area 0,09 m2 Filter bags for BFS-101 ECCO BFS-101 Ord. No. 8613 2260 30 Ord. No. 6802 972x yz the xyz specifies the mesh in microns – 37 – ECCO LOW PRESSURE PUMPS - PISTON COMPACT PISTON PUMPS FOR TRANSFERRING FLUIDS Material - ECCO M2P 18B/20B WIDE RANGE OF APPLICATIONS ECCO Flow M2P are small, handy pumps designed for transferring fluids. The applications are for all fluids that needs to be transferred. Suitable for all industries. M2P 18B Piston rod stainless steel Piston rod packing Piston packing SMALL SIZE AND HIGH VERSATILITY A M2P pump has low weight and small dimensions which makes it easy to handle and easy to install. The wide range of accessories makes it easy to alternate between different jobs. M2P 20B Hard-chromed plated Teflon Teflon Glas-fibre Glas-fibre reinforced teflon reinforced teflon Nitride hardened Cylinder Brass stainless steel Pump hosing Brass Glass-fibre Glas-fibre reinforced polyamide reinforced polyamide Technical data: DESIGNED FOR SAFETY ECCO Flow M2P can be driven against closed valve to a standstill without damage. This feature can also be utilized as a remote control as it makes the pump stop and start without manual attention when the valve is opened or closed. Pressure ratio: 1:2 Max fluid pressure: 3.7 bar Capacity - water 40 l/min - 35 sec viscosity 25 l/min Fluid intake: G 1 int. Fluid outlet: G 1/2 int. Max working pressure for air: 7.5 bar Air consumption at air pressure 6 bar Air connection 0 - approx. 200 l/min - M2P 18B G 1/4 ext. - M2P 20B Quick coupling/air hose 3/8” int. Sound level 60 dB(A) ECCO FLOW M2P 18B ECCO FLOW M2P 20B ECCO Flow M2P 18B can handle all materials which can be pumped with M2P 20B and ECCO Flow M2P 20B is suitable for non-abrasive materials like alcohol, butanol, abrasive materials. Suitable for paints and solvents. To manage the strains the piston cleaning fluid and soap solution, petrol and diesel oil, ethanol, ether, glycerine, rod is manufactured from hard-chromed plated stainless steel and the cylinder from glycol, methanol, mineral-, synthetic and vegetable oil, paraffi and water. Pumping nitride hardened stainless steel. The pump is equipped with non-return valve. of food is not recommended. It is equipped with a valve for air and quick-coupling. Ord. No. Ord. No. ECCO Flow M2P 18B 8621 0111 57 ECCO Flow M2P 20B ECCO FLOW M2P TRANSFER PACK Ecco Flow M2P Transfer Pack is a complete package consisting of pump M2P 18B or M2P 20B, a suction tube for a 200 litre standard barrel, air valve, 5m air hose, 3m outlet hose. Eathing device and throttle valve are accessories. Transfer Pack M2P 18B is mainly intended for pumping of abrasive materials, paints and solvents. Type Ord. No. ECCO TRANSFER PACK M2P 18B 8621 0110 54 ECCO TRANSFER PACK M2P 20B 8621 0110 58 – 38 – 8621 0110 09 ECCO PRESSURE FEED TANKS CLOSED AND SAFE HANDLING The ECCO pressure feed tanks are suitable for all sprayable material and provide safe storage. Having almost no wearing parts they are first choice for paints with abrasive pigments. To prevent the build up static charge all of the tanks have an earthing device. COMPLETE, READY FOR START UP The tanks are made of galvanized steel and as standard equipped with regulator, pressure gauge, safety relief valve, re-filling port and ball valves for air and paint. All you have to do is fill with paint and connect to your air supply and spray gun. Volume 9 - 90 litres. PNEUMATIC STIRRER For continous stirring ECCO pressure feed tanks with a manual stirrer can easily be equipped with an oilfree air motor. TOP OR BOTTOM FEED For more viscous materials ECCO pressure feed tanks with bottom outlet should be used. PRESSURE FEED TANK AIR MOTOR FOR STIRRER Air connection: G 1/4 male. Paint connection: G 3/8 male. Explosion proof air powered motor for ECCO tanks with stirrers. Including bracket, quick coupling for air hose, speed control valve and silencer. Air consumption at 100 - 150 rpm: 150 - 200 l/min. 10 lit tank 45 lit tank TOP FEED Type Air Volume pressure Height max., bar mm litre P10R(S)-2.4 9 2.4 Ord. No. Inner Ø mm Width Weight mm kg 520 210 330 8 8610 0110 60 ELM 33 P Ord. No. 8622 0216 09 P12R-6 12 6 545 245 350 25 8622 0116 12 P12RA-6* 12 6 695 245 350 27 8622 0116 13 P24R-6* 24 6 945 245 350 32 8622 0116 24 P45R-4* 45 4 885 360 470 46 8622 0116 45 P45R-6* 45 6 885 360 470 46 8622 0116 46 P90R-6* 90 6 1165 360/440 470 63 8622 0116 90 OVERFLOW PROTECTOR Facilitates the filling of ECCO Pressure Feed Tank 12 - 500 litres. * With manual stirrer. BOTTOM FEED Type Air Volume pressure Height Inner Width Weight max., bar mm Ø mm mm kg litre Ord. No. Ord. No. P24RP-6 24 6 795 245 525 30 8622 0116 25 P45RP-4 45 4 735 360 645 44 8622 0116 47 P45RP-6 45 6 735 360 645 44 8622 0116 48 StopFlow 6003 9157 00 For stainless steel versions, please contact your nearest retailer of ECCO Products. – 39 – PAINT SUPPLY PAINT PRESSURE REGULATORS COLOUR CHANGING SYSTEMS Paint pressure regulator with pneumatic or spring controlled regulation of the paint ECCO LP CCM is a pneumatically operated colour change system. The system is modular pressure. This new generation of paint pressure regulators will give you high accuracy on and can be built according to customer needs. All material in contact with liquid are the paint pressure and will reduce the pulsations in your system to a minimum. All parts in produced in high grade stainless steel. Sealings and o-ring are from UHMW and Perflour contact with paint are in stainless steel which makes it suitable for waterborne paint. 128 to withstand all known paints and solvents. ECCO LP CCM can be equipped with a free number of colour changing valves (CCV). The modules are prepared for circulation. The use of specially designed fittings obtain a dead end free connection all the way from the plastic hose to the valve. This will give trouble free operation and optimum conditions for the circulated materials. ECCO Flow Col 06 AP ECCO Flow Col 06 SP (Air controlled pressure) (Spring controlled pressure) Technical data Max paint pressure 20 bar Recommended paint pressure 2-6 bar Max paint flow Depends on viscosity, system pressure, etc. Recommended pilot air pressure 5-9 bar Max air pressure, for flushing/purging 20 bar Max solvent pressure, for flushing/purging Max operating frequency ECCO Flow Col 10S ECCO Flow Col 10A-SS (Spring controlled pressure) (pneumatic control) 20 bar 60 cycles/minute intermittent Type Ord. No. 8611 4710 00-90 ECCO LP CCM Technical data Max primary pressure 10 bar Max secondary pressure Max paint flow PAINT HEATER H3000 8 bar Min secondary pressure 0,5 bar Depends on viscosity, system pressure, hose size etc. The paint heater Ecco H3000 is a high performance heater for most types of fluids. The heater work at a pressure up to 400 bars, has a comopact and robust design and is easy Type Ord. No. ECCO Flow Col 06 AP 8623 0136 46 ECCO Flow Col 06 SP (without manometer) 8623 0136 47 Ecco Flow Col 06 SP (including manometer) 8623 0136 50 Wall bracket for Ecco Flow Col 06 6004 0225 15 Ecco Flow Col 10A-SS 8623 0130 46 Ecco Flow Col 10S - SS 8623 0130 47 Ecco Flow Col 10BA - SS Ecco Fow Col 15 BS-SS to maintenance. ATEX pending in 2012. TECHNICAL DATA Length 630 mm / 25 inch 8623 0132 47 Width 280 mm / 11 inch 8623 0132 46 Depth 140 mm / 5,5 inch Max inlet pressure PUMP PANEL PSU AL 15 Power 400 bar 3000 W Power supply 220 V AC- 50 Hz Pump unit for taylor made Spray Pack, including pump Ecco Flow AL 15, bracket, pressure Temperature range 100 degrees C gauge and regulators. Fits all Ecco low pressure spray guns and hoses. Technical data about Flame proof as per IS 2148 the pump ECCO Flow AL15 , see page 36. Weather proof as per 3/8” BSP Fluid outlet 3/8” BSP Type ECCO PAINT HEATER H3000 Type ECCO PSU AL 15 – 40 – Ord. No. 8613 2311 65 IP 55 Fluid inlet Ord. No. 8613 6114 60 STIRRERS PROPELLER STIRRERS FOR PUMP UNITS PROPELLER STIRRERS FOR OPEN PAILS Stirrers with edge bracket for open standard pails Stirrer for 20 litle pails in ECCO pump units or Spray of 12, 20 or 200 litre. The Ecco ELM stirrers have a Packs. Complete with lubrication-free air motor, shaft and a propeller of stainless steel. The com- silencer, speed control valve, mounting device plete stirrer includes a lubrication-free air motor, and air hoses. Suitable for silencer, speed control valve and a quick coup- 115L, 615L, 117L, 317L, 617L and for pumps Ecco ling for 3/8” air hose. Feed 115L-615L and Ecco Feed A2 SS . Spray Packs 315L, Ecco ELM 33F-GS1 Type Ord. No. ECCO ELM 33F-GS12 for 12 litre pails 8610 0110 68 Type ECCO ELM 33F-GS1 for 20 litre pails 8610 0110 65 ECCO ELM 33F-S Ecco ELM 33F-GS2 for 200 litle pails 8610 0110 66 - Quick coupling for ELM 33FS 8610 0110 73 Ecco ELM type: 33F-GS12 33FGS1 33F-GS2 Length of shaft incl. propeller 210 mm 320 mm 860 mm Propeller diameter: 80 mm 80mm 160 mm Weight complete: 2,4 kg 2,4 kg 4,6 kg HELIX SCREW STIRRERS FOR OPEN PAILS Ord. No. 8610 0110 63 Length, shaft with propeller 335 mm Propeller diameter 80 mm Weight complete 1,8 kg STIRRER MOTOR FOR PRESSURE FEED TANKS This stirrer has a unique helix-shaped stirrer Lubrication-free motor with silecer, speed control valve, quick coupling for 3/8” air hose blade to screw down through the 2” hole of and mounting adapter for ECCO POT pressure feed tanks with a manual stirrer. Weight: 2,4 a 200 litre drum. The stirrer is then fastened by kg. For pressure feed tank B.D.M. there is an adapter as necessary. its threading. The ECCO Helix has shaft and propeller in stainless steel for abrasive fluids. It is highly effective and can also be used in other containers with the same depth. Both silencer, speed control valve and quick coupling is included. The stirrer can also be mounted on an open 200 litre container using the extra edge bracket. Type Ord. No. ECCO Helix LS in stainless steel 8610 0112 71 Additional edge bracket for mounting on open drums 6003 6663 00 Length, shaft with propeller 850 mm Propeller diameter 80 mm Weight complete 8,2 kg Type Ord. No. ECCO ELM 33P 8610 0110 60 Adapter for pressure feed tank B.D.M. 6003 3902 80 – 41 – HIGH PRESSURE PUMPS - ECCO POWER FLOW ECCO Power Flow pump series are the perfect choice for a large variety of industries such as general industry, wood, protective coatings, marine/offshore and more. The pump series range is suitable for liquids from low to very high viscosities, primers, finish paints and paints containing varied particle size. The high paint pressure required for airless paint is generated by strong, double acting air operated pumps. The new designed pump has a high performance air motor that ensures a faster change over, which makes the pulsation disappear and the lacquer processing more stable, versus a conventional mechanical change over which has a high pulsation. The pumps are produced to reach the highest standard of quality and life time and they are available in a range of fluid and pressures ratios: 14:1, 28:1, 40:1 and 75:1. ADVANTAGES • Unique new design air motor • Quick pneumatic changeover mechanism, giving no pulsation and ensures a perfect finish • Change over mechanism ensures no stalling • Ice free air motor • All wetted parts are in stainless steel, thus usable with water borne and solvent borne materials • Easy maintenance due to few parts and simple construction APPLICATION MATERIALS • Solvent- or water borne coatings • Primers and catalysed laquers • Enamels and polyurethane’s • UV-paint SELECTION GUIDE FOR POWER FLOW PUMPS Applications Wood PUMPS: General Industry Materials Corrosion Protection Solvent & Wood-stains, lacquers water borne coating & varnishes Primers, sealers & catalysed lacquers ECCO POWER FLOW 214S 8621 0714 00 X X X X ECCO POWER FLOW 214S-TP-AA 8621 0714 10 X X X X ECCO POWER FLOW 214S-T-AA 8621 0714 15 X X X X ECCO POWER FLOW 214S-B-AA 8621 0714 20 X X X X ECCO POWER FLOW 328S 8621 0715 00 X X X X X ECCO POWER FLOW 328S-TP-A 8621 0715 05 X X X X X ECCO POWER FLOW 328S-T-A 8613 2346 29 X X X X X ECCO POWER FLOW 328S-B-A 8621 0715 46 X X X X X ECCO POWER FLOW 328S-TP-AA 8621 0715 10 X X X X X ECCO POWER FLOW 328S-T-AA 8613 2346 26 X X X X X ECCO POWER FLOW 328S-B-AA 8613 2346 25 X X X X X ECCO POWER FLOW 640S 8621 0723 00 X X X X X X ECCO POWER FLOW 640S-T-A 8613 2346 59 X X X X X X ECCO POWER FLOW 640S-B-A 8621 0723 46 X X X X X X ECCO POWER FLOW 1275S 8621 0726 00 X X X X X X ECCO POWER FLOW 1275S-T-A 8621 0726 15 X X X X X X ECCO POWER FLOW 1275S-B-A 8621 0726 20 X X X X X X – 42 – ECCO POWER FLOW 214S-AA / 328S A / 328S AA ECCO Power Flow 214S / 328S A/AA is particularly suitable for craftsmen as an additional The pump also qualifies for manual and automated installations feeding one or more unit and industrial painting jobs. The ECCO Power Flow 214S & 328S A / AA qualifies for the spray guns. These ECCO Power Flow pumps can be delivered bare, on a tripod, on a trol- machine building, wood, furniture, steel and vehicle industries. It is suitable for anyone ley or on a wall bracket. It can easily be adjusted into an Air Assist model (AA). who uses a variety of painting materials. PF 214S - TP-AA PF 214S - T-A PF 328S-TP/T-A PF 328S - T-AA TECHNICAL DATA ECCO POWER FLOW 214S AA ECCO POWER FLOW ECCO POWER FLOW ECCO POWER FLOW 214S AA 214S-TP-AA 214S-T-AA 214S-B-AA 8621 0714 00 8621 0714 10 8621 0714 15 8621 0714 20 Type BARE TRIPOD TROLLEY BRACKET Pressure ratio 14:1 14:1 14:1 14:1 Max. spray volyme (cc/min) 1200 1200 1200 1200 Ord No. Capacity (cc/double stroke) ECCO POWER FLOW 40 40 40 40 3/4” AND 1/4”-18 3/4” AND 1/4”-18 3/4” AND 1/4”-18 3/4” AND 1/4”-18 6 (57) 6 (57) 6 (57) 6 (57) 250 250 250 250 Air inlet connection NOT INCLUDED FEMALE 1/4” OR 1/2” FEMALE 1/4” OR 1/2” FEMALE 1/4” OR 1/2” Air outlet connection NOT INCLUDED G1/4” G1/4” G1/4” 84 (1218) 84 (1218) 84 (1218) 84 (1218) 15 18 25 18 Paint connection suction/pressure Max air inlet pressure Bar (Psi) Max. air consumption (N ltr/min) Max output pressure Bar (Psi) Weight (Kg) TECHNICAL DATA ECCO POWER FLOW 328S A / 328S AA ECCO POWER FLOW 328S A ECCO POWER FLOW 328S-TP-A ECCO POWER FLOW 328S-T-A ECCO POWER FLOW 328S-B-A ECCO POWER FLOW 328S-TP-AA ECCO POWER FLOW 328S-T-AA ECCO POWER FLOW 328S-B-AA 8621 0715 00 8621 0715 05 8613 2346 29 8621 0715 46 8621 0715 10 8613 2346 26 8613 2346 25 Type BARE TRIPOD TROLLEY BRACKET TRIPOD TROLLEY BRACKET Pressure ratio 28:1 28:1 28:1 28:1 28:1 28:1 28:1 Max. spray volyme (cc/min) 1500 1500 1500 1500 1500 1500 1500 Ord. No. Capacity (cc/double stroke) 40 40 40 40 40 40 40 3/4” AND 1/4”-18 3/4” AND 1/4”-18 3/4” AND 1/4”-18 3/4” AND 1/4”-18 3/4” AND 1/4”-18 3/4” AND 1/4”-18 3/4” AND 1/4”-18 8 (116) 8 (116) 8 (116) 8 (116) 8 (116) 8 (116) 8 (116) 400 400 400 400 400 400 400 Air inlet connection NOT INCLUDED FEMALE 1/4” or 1/2” FEMALE 1/4” or 1/2” FEMALE 1/4” or 1/2” FEMALE 1/4” or 1/2” FEMALE 1/4” or 1/2” FEMALE 1/4” or 1/2” Air outlet connection NOT INCLUDED NO USE NO USE NO USE G1/4” G1/4” G1/4” 224 (3250) 224 (3250) 224 (3250) 224 (3250) 224 (3250) 224 (3250) 224 (3250) 16 19 18 18 20 26 19 Paint connection suction/pressure Max air inlet pressure Bar (Psi) Max. air consumption (N ltr/min) Max output pressure Bar (Psi) Weight (Kg) – 43 – ECCO POWER FLOW 640S A / 1275 S The pump ECCO Power Flow 640S A is suitable for medium and high viscosity materials. This pump has been designed for high performance purposes and feeds large type nozzles or several spray guns at a time. Suitable for protective coatings, wood and car manufacturers. A single spraying operation produces high coating thickness and high performance characteristics. The use of solvents is cut to a minimum, because highly viscous materials can be applied directly. There is hardly any overspray or spray mist with the environment remaining clean. Our equipment stands for superb performance quality and meets all technical requirements. Their advanced design and conception correspond to all applicable safety specifications and regulations. Sophisticated engineering, functional dependability and easy handling are only few of the outstanding features of these equipments. The pump can be delivered bare, on a trolley for easy mobility painting big parts or on a wall bracket. The air powered airless model ECCO Power Flow 1275S A is designed to withstand the toughest working conditions as can be found at shipyards, steel construction plants, freight car manufacturing plants or bridge building sites. ECCO Power Flow 1275S A pumps come in various versions: hydraulic pressures up to 450 bar corresponds to relative transfer volume up to 210 cc /cycle so that even with several spray guns and long material hoses considerably high spray pressures can be obtained. ECCO Power Flow 1275S A pumps are in stainless steel 410. The pumps are also available as stationary units for wall mounting. ECCO Power Flow 640S - T-A TECHNICAL DATA ECCO POWER FLOW 640S -A ECCO POWER FLOW ECCO POWER FLOW ECCO POWER FLOW 640S A 640S-T-A 640S-B-A 8621 0723 00 8613 2346 59 8621 0723 46 Type BARE TROLLEY BRACKET Pressure ratio 40:1 40:1 40:1 Max. spray volyme (cc/min) 5500 5500 5500 Ord. No. Capacity (cc/double stroke) Paint connection suction/pressure 110 110 110 1” and 1/4”-18 1” and 1/4”-18 1” and 1/4”-18 8 (116) 8 (116) 8 (116) Volume/Cycle (Ml) Max air inlet pressure Bar (Psi) 110 110 110 Max. air consumption (N ltr/min) 1900 1900 1900 Air inlet connection NOT INCLUDED FEMALE 1/4” or 1/2” FEMALE 1/4” or 1/2” Air outlet connection NOT INCLUDED NO USE NO USE 320 (4641) 320 (4641) 320 (4641) 23 32 24 Max output pressure Bar (Psi) Weight (Kg) TECHNICAL DATA ECCO POWER FLOW 1275S-A ECCO POWER FLOW ECCO POWER FLOW 1275S 1275S-T-A 8621 0726 00 8621 0726 15 Type BARE TROLLEY Pressure ratio 75:1 75:1 Max. spray volyme (cc/min) 5500 5500 Ord.No. Capacity (cc/double stroke) Paint connection suction/pressure Max air inlet pressure Bar (Psi) 210 210 1” AND 1/4”-18 1” AND 1/4”-18 6 (57) 6 (57) Volume/Cycle (Ml) 210 210 Max. air consumption (N ltr/min) 2600 2600 Air inlet connection NOT INCLUDED 1” CLAW COUPLING Air outlet connection NOT INCLUDED NO USE 450 (6527) 450 (6527) 73 98 Max output pressure Bar (Psi) Weight (Kg) – 44 – ECCO Power Flow 1275S-A ACCESSORIES FOR HIGH PRESSURE PUMPS SERVICE KITS OPTIONAL HOSE A service kit includes important wear parts for each pump. It also includes gaskets Return flow pipe, for connection to the ball valve of normally damaged when disassembling the pump. Installation instructions in the form of the high pressure filter. Render possibility to circulate exploded drawings are provided. flushing solvent through the suction pipe into the pump, high pressure filter and back to the solvent container. Delivered with pipe and connectors made in stainless steel connected with 1/2“- hose. ’ Fits the ECCO Power Flow 214S, -328S, -640S and -1275S. 6004 0264 09 RETURN FLOW PIPE HIGH PRESSURE FILTER SERVICE KIT ECCO POWER FLOW AIR MOTOR 214S 6004 0264 90 Filter insert in stainless steel, each available in three different sizes. SERVICE KIT ECCO POWER FLOW AIR MOTOR 328S 6004 0265 90 For use in high pressure filter of the ECCO Power Flow 214S, -328S, -640S and -1275S. SERVICE KIT ECCO POWER FLOW 214S/328S PTFE 6004 0265 91 SERVICE KIT ECCO POWER FLOW 214S/328S UHMW 6004 0265 92 SERVICE KIT ECCO POWER FLOW 214S/328S PTFE+LEATHER 6004 0265 93 SERVICE KIT ECCO POWER FLOW 214S/328S UHMW+PU 6004 0265 94 SERVICE KIT ECCO POWER FLOW AIR MOTOR 640S 6004 0266 90 SERVICE KIT ECCO POWER FLOW 640S PTFE 6004 0266 91 SERVICE KIT ECCO POWER FLOW 640S UHMW 6004 0266 92 SERVICE KIT ECCO POWER FLOW 640S PTFE+LEATHER 6004 0266 93 SERVICE KIT ECCO POWER FLOW 640S UHMW+PU 6004 0266 94 SERVICE KIT ECCO POWER FLOW AIR MOTOR 1275S 6004 0268 90 FILTER INSERT 100 MESH 214S/328S 0,150 mm 6004 0265 67 SERVICE KIT ECCO POWER FLOW 1275S PTFE 6004 0268 91 FILTER INSERT 200 MESH 214S/328S 0,075 mm 6004 0265 68 SERVICE KIT ECCO POWER FLOW 1275S PTFE+LEATHER 6004 0268 93 FILTER INSERT 60 MESH (STANDARD) 640S/1275S 0,250 mm 6803 5858 00 SERVICE KIT ECCO POWER FLOW CONTROL BLOCK 6004 0265 95 FILTER INSERT 100 MESH 640S/1275S 0,150 mm 6803 5867 00 SERVICE KIT ECCO POWER FLOW CONTROL BLOCK 1275S 6004 0268 95 FILTER INSERT 200 MESH 640S/1275S 0,075 mm 6803 5868 00 FILTER INSERT 60 MESH (STANDARD) POWERCOL HIGH PRESSURE REGULATOR Fluid pressure regulators are used to reduce main line pressure, remove pulsations and maintain the desired fluid pressure to the spray guns. ECCO PowerCol has a compact design and high regulation accuracy.It introduces very little shear of the paint, is very reliable and requires little maintenance. All wetted parts are in stainless steel. For pump Size Ord. No 214S/328S 0,250 mm 6004 0265 66 PAINT HEATER H3000 The paint heater Ecco H3000 is a high performance heater for most types of fluids. The heater work at a pressure up to 400 bars, has a comopact and robust design and is easy to maintenance. ATEX pending in 2012. TECHNICAL DATA Ord. No. Length 630 mm / 25 inch Width 280 mm / 11 inch Depth 140 mm / 5,5 inch Max inlet pressure 400 bar PowerCol 20S high pressure regulator in SS 8623 0141 20 Power Power Col 20S high pressure regulator in SS with manometer 8623 0141 30 Power supply 220 V AC- 50 Hz Temperature range 100 degrees C Flame proof as per IS 2148 TECHNICAL DATA: Max inlet pressure Regulated pressure 345 bar 30-290 bar Maximum flow rate 6 lit/min Fluid inlet 3/8” BSP Fluid outlet 3/8 BSP Gauge port inlet 1/4” BSP Length Diameter Weather proof as per 3000 W IP 55 Fluid inlet 3/8” BSP Fluid outlet 3/8” BSP 300 mm / 12 inch 160 mm / 6 1/3 Type ECCO PAINT HEATER H3000 Ord. No. 8613 6114 60 – 45 – 2K FLUID HANDLING ECCO DYNAMIC FLOW - 2K DOSING AND MIXING UNIT The Dynamic Flow distinguishes itself through a high precision TwinJet injection technology. The measurement of the flows is done by Coriolis mass flow meters. These mass flow meters are maintenance free, since there are no moving parts in the material flow, measurement is done through resonance. In the same time temperature and material mass is measured. The control of the unit is done by a well proven Siemens S7 controller. Thus Dynamic Flow is an absolutely reliable unit fitted for the dosing and mixing of almost all 2K materials. Advantages • Siemens S7 controller • 4” Touch Screen – menu driven • User friendly text and pictograms • Twin Jet‘ process – Adjustments and dosing is done on both colour and hardener • Management of up to 10 colours, hardener, and cleaning agent • EX-proven remote control box as standard • Usable for all pressure levels and applications (three different versions) • Dosage control with error messages in text and suggestions for solutions • Highest mixing precision < 1% • For manual and automatic operation Type Ord. No. 2K Low Pressure Dynamic Flow (standard model for 1 colour, 1 hardener, 2 flushing) 2K High Pressure Dynamic Flow (standard model for1 colour, 1 hardener, 2 flushing) TECHNICAL DATA Valves 10 Recipies 10 Flushing programs 11 Flow rate up to 6 l/min. Flow range 0 - 160 bar 8614 0201 12 8614 0301 12 ECCO Dynamic Flow Standard version: 1. Control cabinet for wall mounting 2. Mixing module for wall mounting with 4 valves 3. Remote control panel – functions: spray, purge, fill, stop 4. Ex-cable between control and mixing modules 5 m long Optional Mixing precision +/- 0,5% • Additional valves – low & high pressure Mixing ratio 0,5 - 50 : 1 • Larger 6“ Touch Screen Current supply 230 V AC • EX remote control with recipe selection 600 x 700x 300mm • Ex-cable between controller and mixing module 10 or 25m. 600 x 700x 300mm • Extra high pressure – up to 210 bar 6 bar (vol depending on application) • Gun flush box • Steel frame for control cabinet and mixing module Control cabinet WxHxD Mixing module WxHxD Compressed air supply – 46 – PERSONAL SAFETY FRESH AIR HOOD JUNIOR AIR FILTER Junior is recommended for spray painting. The hood will protect the wearer Air filter for breathing air, can be connected directly to the air supply. The filter will against dust and fumes. The large window which can be raised is covered by remove particles larger than 0.01 µ, oil fumes and odours. The filter will not remove protective foil. The Fresh air hood Junior includes innerhood, protecting foil methane, carbon monoxide or other toxic gases. (10 pcs.), air hose and belt with throttle valve with nipple for connection to air hose Ø 6.3 mm (1/4”) female. Air consumption: 150 - 200 l/min. Ord. No. Technical data Fresh air hood Junior 8615 0133 35 Working pressure Innerhood, set of 10 pcs. 6803 6678 00 Normal working pressure to safety helmet Protecting foil, set of 100 pcs 6803 6679 00 Air capacity max. 6 bar 3 bar 360 l/min Air connections G 1/4 female Weight 2.5 kg AIR THERMOSTAT VORTEX Ord. No. For air conditioning of fresh air helmets and hoods. The temperature of the breathing air (warm/cold) is adjustable. An air thermostat Vortex includes hose nipple Air filter AFR 6 8202 0217 60 Ø 1/4” female. To be installed between air filter and helmet. Bracket for wall-mounting 6003 6764 00 Ceramic filter, AFR13 before 2007-10 1202 6257 01 Ceramic filter, AFR13 after 2007-10 1202 6257 02 Ceramic filter, AFR6 1202 6257 06 Chemical filter, AFR13 before 2007-10 1202 6281 01 Chemical filter, AFR13 after 2007-10 1202 6281 02 Chemical filter, AFR6 1202 6281 06 HOSE FOR BREATHING AIR Air hose made of wear resistant PVC. Delivered per metre. Outer diam. 11 mm. Ord. No. Air thermostat Vortex 8615 0133 70 Ord. No. Air hose, inner diam. 1/4” 6003 9598 00 Coupling G 1/4 with cap nut and hose clamp 6001 1235 00 Quick coupling QIC 10A H06 8202 1302 02 Nipple NIP 10A H06 8202 1202 11 Hose clamp 0347 0122 07 – 47 – Version: 2, 2008-11 ECCO Head Office Sweden ECCO Subsidiaries Belgium ECCO Distributors: Australia Denmark Macedonia South Africa Austria Finland Mexico South Korea Argentina France Netherlands Spain Bulgaria Germany Norway Switzerland Canada Greece Peru Turkey Chile Hungary Poland Ukraine China Iceland Portugal United Kingdom Colombia India Russia United States Croatia Iran Serbia Czech Republic Italy Slovakia Tryck: Skaraborgs Offset, Skövde. Mars 2012 LS.2010-03 ECCO Finishing AB SE-532 22 Skara, Sweden Phone +46 511 134 45 Fax +46 511 180 13 E-mail [email protected] www.eccofinishing.com