Preview only show first 10 pages with watermark. For full document please download

Ecl Series

   EMBED


Share

Transcript

ECL Series 10/100 Ethernet over Coaxial or low grade Twisted Pair, Pair managed line driver Product Description The KBC ECL series is a fully ruggedized 10/100 Ethernet line driver. The line driver provides connectivity for one 10/100Mbps IEEE standard twisted pair copper port over either a 75ohm coaxial cable interface or historical twisted pair telephone grade cable. Varying data rates are supported depending on cable distance and quality. ty. Full management functionality is offered to the user through a web interface or units can operate in plug and play mode for simple quick installation. The series is available in either wall mount and 3U chassis card configurations. Product Features - Web browser interface for advanced configuration and diagnostics Dynamic data rate adjustment based on line distance and quality Wide operational temperature range 10/100 auto sensing MDI/MDIX Typical System Configuration Transmission distance depends on cable type and required data rate Cat 5E (CAT5 or above) 75Ω Coax or existing telephone grade cable ECL Series Copyright © KBC Networks Ltd.-2011 Page 1of 2 www.kbcnetworks.com Specifications Mechanical Standards IEEE Standard Dimensions (Wall Mount WxHxD)(2) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Full Duplex Number of 3U Chassis Card Slot RJ45 Port (Ethernet) Data Format Data Rate Environmental Ethernet 10/100Mbps Auto-Sensing Half & Full Duplex Operating Temperature Storage Temperature Operating Humidity Mean Time Between Failure (MTBF) Power Power Input Power Supply (1) 12-24Vac/dc @ 400mA Input: 100~240Vac Output: +12Vdc UL and cUL listed PSU Supplied from FR3 Chassis Chassis Card 135mm x 115mm x 36mm 5.32” x 4.55” x 1.42” 1 0o - +65oC / 32o - +149oF -40o - +74oC / -40o - +165oF 0 to 95% non-condensing > 300,000 Hours Connectors 10/100 Electrical VDSL Port A Port B Power (3) 1x RJ45 1 x 75Ω Coaxial 1 x RJ11 2-way Screw Block Terminal DIP Switch Settings Line end remote / centre Part Number Configurator ECL-WA B: 3U Chassis Card W: Wall-Mount A: US Power Plug B: UK Power Plug C: Euro Power Plug E: Australian Power Plug Transmission Distance(4) Twisted Pair Telephone grade 75Ω Coax Uplink Downlink 200m 84.00Mbps 89.36Mbps 300m Uplink Downlink 68Mbps 50.6Mbps 400m 65.11Mbps 67.76Mbps 600m 29Mbps 35.4Mbps 1000m 8.13Mbps 14.38Mbps 900m 14.1Mbps 19.6Mbps 1200m 8.12Mbps 11.24Mbps 1200m 11.2Mbps 15.6Mbps 2000m 2.50Mbps 6.25Mbps 2400m 2Mbps 1.3Mbps 3600m 1.7Mbps 0.16Mbps 1. Please select the power plug from US Standard, Euro 2 Circular or UK 3 Pin square when placing order. 2. Please consult with KBC for dimensional drawings. 3. Power lines are crimped and fitted to screw block connector in factory. 4. Transmission distances supplied are for indication purposes only. Actual achievable transmission distances on site will depend on cable type installed and quality and age of installation. Due to ongoing technological improvements, product specifications are subject to change without notice. KBC is not liable for any errors, omissions or changes of any description of the goods contained herein. This information is for the sole purpose of identifying the products, and KBC makes no warranty that the products conform to any description contained herein. Do not rely solely on any representations, statements, or assertions concerning these Products contained herein.