Transcript
Ecobee 3 Settings
SETTINGS o Installation Settings (Advanced Options) Equipment Wiring = G, Y1, W1,O/B, Rh, C, Y2 Heat Pump = 2 stage Type = Geothermal o O/B Reversing Valve = Energized on Cool o Aux Heat Simultaneous Operation = Enabled Furnace o Fan Control in Heat Mode = Thermostat Thresholds Auto Heat/Cool = Enabled Heat/Cool Min. Delta = 5C Compressor Min Cycle Off Time = 300 sec Compressor Min Outdoor Temp = Disabled A/C overcool Max = Disabled Aux Heat Max Outdoor Temp = 1C Heat Differential Temp = 0.3C ??? Heat Dissipation Time = 30 sec Aux Min On Time = 2 min Cool Differential Temp = 0.3C ??? Cool Dissipation Time = 30 sec Compressor Min On Time = 5 min Compressor Reverse Staging = On Compressor Stage 2 Delta = 1.1C ??? Compressor Stage 1 Max Runtime = Not Used Compressor to Aux Temp Delta = 5C Compressor to Aux Runtime = Not Used Aux Reverse Staging = On Temperature Correction = 0.0C Humidity Correction = 0% Thermal Protect = Disabled Installer Code = Disabled Access Control = Disabled
ABOUT o Version = 3.7.0.936
SYSTEM o Fan = Auto at Least 0 min/hr
SENSORS o Smart Home/Away = Disabled o Follow Me = Enabled SCHEDULE o Sleep = 18.5C Heat, 23.5C Cool o Away = 18.5C Heat, 23.5C Cool
COMFORT SETTINGS o Home = 18.5C Heat, 23.5C Cool, Auto Fan both o Away = 14.0C Heat, 28.0C Cool, Auto Fan both o Sleep = 18.5C Heat, 23.5C Cool, Auto Fan both
VACATION o None Created
ALERTS & REMINDERS o Preferences HVAC Maintenance = Off Furnace & Filter = Off UV Lamp = Off Low Temperature Alert = 10C High Temperature Alert = 33.5C Aux Heat Runtime Alert = 3 hrs Aux Outdoor Temp Alert = 10C Low Humidity Alert = Off High Humidity Alert = Off Display Alerts on Thermostat = Enabled Display Alerts for Heating/Cooling = Enabled
SETTINGS o Date & Time = 24 hr o Preferences Heating Range = 7C – 30C Cooling Range = 15.5C – 33.5C Hold Action = Until I change it Heating Smart Recovery = Enabled Cooling Smart Recovery = Enabled
