Transcript
● ● ● ● ● ● ●
Features Unregulated Converters
Description
Pot-Core Transformer - separated windings High 5.2kVDC Isolation in compact size Optional Continuous Short Circuit Protected Pin Compatible with RH and RK Series Approved for Medical and IGBT Applications UL and EN Certified Efficiency to 82 %
ECONOLINE DC/DC-Converter with 3 year Warranty
The RP series has very high isolation of 5.2 kVDC in a compact size. The converters are EN-60601-1 certified, making them suitable for medical as well as IGBT driver applications.
1 Watt SIP 7 Single & Dual Output
The /X2 version has rearraged pins to permit an input output seperation of more than 9mm.
Selection Guide Part Number SIP 7
Input Voltage (VDC)
Output Voltage (VDC)
Output Current (mA)
RP-xx3.3S*
5, 9, 12, 15, 24
3.3
303
70
2200µF
RP-xx05S*
5, 9, 12, 15, 24
5
200
70-72
1000µF
RP-xx09S*
5, 9, 12, 15, 24
9
111
75
1000µF
RP-xx12S*
5, 9, 12, 15, 24
12
84
75-78
470µF
RP-xx15S*
5, 9, 12, 15, 24
15
66
80
470µF
RP-xx24S*
5, 9, 12, 15, 24
24
42
80
220µF
RP-xx3.3D*
5, 9, 12, 15, 24
±3.3
±152
70
±1000µF
RP-xx05D*
5, 9, 12, 15, 24
±5
±100
74-76
±470µF
RP-xx09D*
5, 9, 12, 15, 24
±9
±56
75
±470µF
RP-xx12D*
5, 9, 12, 15, 24
±12
±42
79-82
±220µF
RP-xx15D*
5, 9, 12, 15, 24
±15
±33
80-82
±220µF
RP-xx24D*
5, 9, 12, 15, 24
±24
±21
80
±100µF
5, 12, 24
+15/-9
±42
70-85
±220µF
(%)
Max Capacitive Load(1)
xx = Input Voltage. Other input and output voltage combinations available on request * add Suffix “P” for Continuous Short Circuit Protection, e.g. RP-0505S/P, RP-0505D/P * add Suffix “/X2” for single output with alternative pinning e.g. RP-0505S/X2, RP-0505S/P/X2
RoHS
2011/65/EU 6/6
E-358085
EN-60950-1 Certified IEC/EN-60601-1 Certified* CSA/UL-60950-1 Certified* * +15/-9 Version excluded
RP
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin typ.
Load Voltage Regulation
3.3V output types
20% max.
(10% to 100% full load)
5V output type
15% max.
9V, 12V, 15V, 24V output types, RP-xx1509D Output Ripple and Noise (20MHz limited) Operating Frequency
10% max.
100 80
50kHz min / 94kHz typ.
Efficiency at Full Load
70% min. / 80% typ.
Minimum Load = 0%
Specifications valid for 10% minimum load only.
Isolation Voltage
(tested for 1 second)
5200VDC
(rated for 1 minute**)
2600VAC / 60Hz
Isolation Capacitance
20 GΩ min.
Short Circuit Protection
1 Second
P-Suffix
Continuous
40
Safe Operating Area
20 0
-40
0
50
90 100 95 Operating Temperature °C
150
**Any data referred to in this datasheet are of indivative nature and based on our practical experience only. For further details, please refer to our Application Notes.
-40°C to +90°C (see Graph) continued on next page
E-66
60
4pF min. / 10pF max.
Isolation Resistance
Operating Temperature Range (free air convection, without derating)
(Ambient Temperature)
100mVp-p max. 50kHz min. / 100kHz typ. / 120kHz max. RP-xx1509D
Derating-Graph
Output Power (%)
RP
RP-xx1509D
Efficiency
REV: 0/2014
Refer to Application Notes www.recom-power.com
RP Series
ECONOLINE DC/DC-Converter Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
2.4g
Packing Quantity
25 pcs per Tube
MTBF (+25°C) (+85°C)
}
Detailed Information see Application Notes chapter "MTBF"
using MIL-HDBK 217F
928 x 103 hours
using MIL-HDBK 217F
150 x 103 hours
Certifications CSA General Safety
Report: E358085
CSA C22.2 No. 60950-1-03
UL General Safety
Report: E358085
EN General Safety
Report: SPCLVD1109103
EN Medical safety
Report: SPCMDD1205098-4
UL 60950-1 2nd Ed. EN60950-1:2006 + A12:2011 IEC/EN60601-1:2006, 3rd Edition
Notes Note 1
Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter.
Typical Characteristics
RP-xx12S
RP-xx05S
100
0505
1205
40
40
40
0%
40%
20%
80%
60%
20 0
0%
100%
Deviation / Load
Deviation from Nominal (%)
10.000 5.000
1205
-5.000
0% 20% 40% 60% Total Output current (%)
80%
100%
5.000 0.000
1212
-5.000
0% 20% 40% 60% Total Output current (%)
0505 Efficiency %
40 20
40%
60%
80%
Total Output current (%)
100%
1212
-10.000
100%
60
40
40
20
0%
20%
40%
60%
Total Output current (%)
80%
0515
80
60
0
80%
1215
RP-xx15D
Efficiency %
60
0% 20% 40% 60% Total Output current (%)
0.000 -5.000
Efficiency / Load
0512
80
20%
100%
5.000
100
100
1205
0%
80%
0515
10.000
Efficiency / Load
80
100%
15.000
RP-xx12D
Efficiency / Load
80%
20.000
10.000
RP-xx05D 100
60%
Deviation / Load
0512
15.000
-10.000
40%
20%
25.000
20.000
0505
0.000
0%
Total Output current (%)
Deviation from Nominal (%)
20.000
0
100%
25.000
15.000
0
80%
60%
20
Total Output current (%)
Deviation / Load
-10.000
40%
20%
1215
100%
1215
20 0
0%
20%
40%
60%
80%
100%
Total Output current (%)
continued on next page www.recom-international.com
REV: 0/2014
E-67
RP
0
Efficiency %
60
20
0515
80
60
25.000
Deviation from Nominal (%)
1212
60
Total Output current (%)
Efficiency %
100
0512
80
Efficiency %
Efficiency %
80
Efficiency / Load
Efficiency / Load
Efficiency / Load 100
RP-xx15S
RP Series
ECONOLINE DC/DC-Converter Typical Characteristics
RP-xx05D
RP-xx12D
Deviation / Load
25.000
25.000 20.000
Deviation from Nominal (%)
0505
15.000 10.000 5.000 0.000
1205
-5.000
0% 20% 40% 60% Total Output current (%)
100%
80%
20.000
0512
15.000
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
Deviation / Load
Deviation / Load
25.000
-10.000
RP-xx15D
10.000 5.000 0.000
1212
-5.000 -10.000
0% 20% 40% 60% Total Output current (%)
15.000 10.000 5.000 0.000 -5.000 -10.000
100%
80%
0515
1215
0% 20% 40% 60% Total Output current (%)
80%
100%
Application
IGBT Application Circuit Rg
IGBT Driver
Control Signal
IGBT
+Vout 7
1
C2 + -Vin
Isolated DC/DC Converter
C1 +
C3 + 5
2
RP
6
-Vout
Package Style and Pinning (mm) 7 PIN SIP Package
10.20
4.10 1.27 2.0
7.05
RECOM RP-xxxxD ****
2.0
Dual Output
RECOM RP-xxxxS ****
RECOM RP-xxxxD ****
0.51 typ.
0.51 typ. 19.65 Bottom View
0.25
Bottom View /X2
1 2
Recommended Footprint Details
Pin #
Single
Dual
/X2
1
+Vin
+Vin
+Vin
Top View Standard Version
1.00 ø+0.15/0 2.54
2
–Vin
–Vin
-Vin
5
–Vout
–Vout
No Pin
6
No Pin
Com
-Vout
7
+Vout
+Vout
+Vout
XX.X ± 0.5 mm XX.XX ± 0.25 mm
9.65
pin clearance
2.54
1 2
5 6 7
Single Output/X2 Pin Connections
2.54
0.25
7
5
2.54
7.11
pin clearance
19.65 1.27
Single Output
RECOM RP-xxxxS/X2 ****
1 2
6 7 Dual Output
RECOM RP-xx1509D ****
Top View /X2 Version 1 2
5 6 7
The product information and specifications are subject to change without prior notice. All products are designed for non-safety critical commercial and industrial applications. The Buyer agrees to implement safeguards that anticipate the consequences of any failures that might cause harm, loss of life and/or damage property.
E-68
REV: 0/2014
www.recom-electronic.com
